[PATCH 2/4] spl: mmc: Account for SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE being a choice
Chee, Tien Fong
tienfong.chee at altera.com
Tue Nov 25 04:58:30 CET 2025
Hi Jan,
On 15/11/2025 1:13 am, Jan Kiszka wrote:
> [CAUTION: This email is from outside your organization. Unless you trust the sender, do not click on links or open attachments as it may be a fraudulent email attempting to steal your information and/or compromise your computer.]
>
> From: Jan Kiszka <jan.kiszka at siemens.com>
>
> Add SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE as condition where so
> far SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION was enough - though often
> by chance as both options were enabled.
>
> We also need to explicitly select SPL_LOAD_BLOCK when UES_PARTITION_TYPE
> is enabled, just like the other choices do.
>
> Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
> Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
> ---
> common/spl/Kconfig | 1 +
> common/spl/spl_mmc.c | 16 ++++++++--------
> include/part.h | 3 ++-
> 3 files changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> index 8dade2b501e..d24466b0c66 100644
> --- a/common/spl/Kconfig
> +++ b/common/spl/Kconfig
> @@ -573,6 +573,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
>
> config SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
> bool "MMC raw mode: by partition type"
> + select SPL_LOAD_BLOCK
> depends on DOS_PARTITION
> help
> Use partition type for specifying U-Boot partition on MMC/SD in
> diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
> index 467114f8d9a..09e881c464c 100644
> --- a/common/spl/spl_mmc.c
> +++ b/common/spl/spl_mmc.c
> @@ -106,7 +106,8 @@ static int spl_mmc_find_device(struct mmc **mmcp, int mmc_dev)
> return 0;
> }
>
> -#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
> +#if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION) || \
> + defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE)
> static int mmc_load_image_raw_partition(struct spl_image_info *spl_image,
> struct spl_boot_device *bootdev,
> struct mmc *mmc, int partition,
> @@ -415,19 +416,18 @@ int spl_mmc_load(struct spl_image_info *spl_image,
>
> raw_sect = spl_mmc_get_uboot_raw_sector(mmc, raw_sect);
>
> -#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
> - ret = mmc_load_image_raw_partition(spl_image, bootdev,
> - mmc, raw_part,
> - raw_sect);
> - if (!ret)
> - return 0;
> -#endif
> #ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
> ret = mmc_load_image_raw_sector(spl_image, bootdev, mmc,
> raw_sect +
> spl_mmc_raw_uboot_offset(part));
> if (!ret)
> return 0;
> +#else
There is a build issue when CONFIG_SYS_MMCSD_RAW_MODE is disabled.
common/spl/spl_mmc.c: In function ‘spl_mmc_load’:
common/spl/spl_mmc.c:426:9: error: implicit declaration of function
‘mmc_load_image_raw_partition’; did you mean
‘mmc_load_image_raw_sector’? [-Werror=implicit-function-declaration] ret
= mmc_load_image_raw_partition(spl_image, bootdev,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~ mmc_load_image_raw_sector cc1: some
warnings being treated as errors make[2]: ***
[scripts/Makefile.build:297: spl/common/spl/spl_mmc.o] Error 1 make[2]:
*** Waiting for unfinished jobs....
In spl_mmc.c, the block currently guarded by #else should instead be:
#elif defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION) || \
defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE)
Otherwise, mmc_load_image_raw_partition() becomes visible only in that
branch, leading to:
error: implicit declaration of function ‘mmc_load_image_raw_partition’
This happens when both USE_SECTOR and USE_PARTITION{,_TYPE} are turned off.
Correcting the #else to #elif resolves the compilation error.
Thanks,
Tien Fong
More information about the U-Boot
mailing list