[PATCH v2 4/5] configs: j784s4_evm_r5_defconfig: Enable configs for PCIe boot

[Kumar, Udit]

On 11/11/2025 11:46 AM, Hrushikesh Salunke wrote:
> J784S4 SoC has two instances of PCIe, namely PCIe0 and PCIe1. The
> PCIe1 instance is used for PCIe endpoint boot. Enable the configs
> required for PCIe boot on the J784S4 platform.
>
> Additionally, enable configs for J721E WIZ SERDES wrapper, Cadence
> Torrent PHY, and MMIO multiplexer. These are required to configure
> the SERDES lanes at the R5 SPL stage for PCIe endpoint operation.
>
> Signed-off-by: Hrushikesh Salunke <h-salunke at ti.com>
> ---
>   configs/j784s4_evm_r5_defconfig | 13 +++++++++++++
>   1 file changed, 13 insertions(+)
>
> diff --git a/configs/j784s4_evm_r5_defconfig b/configs/j784s4_evm_r5_defconfig
> index cc340a2fe76..2279ba7f173 100644
> --- a/configs/j784s4_evm_r5_defconfig
> +++ b/configs/j784s4_evm_r5_defconfig
> @@ -52,9 +52,16 @@ CONFIG_SPL_FS_EXT4=y
>   CONFIG_SPL_I2C=y
>   CONFIG_SPL_DM_MAILBOX=y
>   CONFIG_SPL_DM_SPI_FLASH=y
> +CONFIG_SPL_PCI_ENDPOINT=y
>   CONFIG_SPL_DM_RESET=y
>   CONFIG_SPL_POWER_DOMAIN=y
>   CONFIG_SPL_RAM_DEVICE=y
> +CONFIG_SPL_PCI_DFU=y
> +CONFIG_SPL_PCI_DFU_SPL_LOAD_FIT_ADDRESS=0x80800000
> +CONFIG_SPL_PCI_DFU_BAR_SIZE=0x400000
> +CONFIG_SPL_PCI_DFU_VENDOR_ID=0x104c
> +CONFIG_SPL_PCI_DFU_DEVICE_ID=0xb010

Could you check once , DEVICE_ID

as per 
https://lore.kernel.org/linux-pci/20240401110951.3816291-1-s-vadapalli@ti.com/ 


ID should be 0xb012


> +CONFIG_SPL_PCI_DFU_BOOT_PHASE="tiboot3.bin"
>   # CONFIG_SPL_SPI_FLASH_TINY is not set
>   CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
>   CONFIG_SPL_SPI_LOAD=y
> @@ -122,6 +129,12 @@ CONFIG_SPI_FLASH_SPANSION=y
>   CONFIG_SPI_FLASH_S28HX_T=y
>   CONFIG_SPI_FLASH_STMICRO=y
>   CONFIG_SPI_FLASH_MT35XU=y
> +CONFIG_MULTIPLEXER=y
> +CONFIG_SPL_MUX_MMIO=y
> +CONFIG_PCIE_CDNS_TI_EP=y
> +CONFIG_SPL_PHY=y
> +CONFIG_SPL_PHY_CADENCE_TORRENT=y
> +CONFIG_SPL_PHY_J721E_WIZ=y
>   CONFIG_PINCTRL=y
>   CONFIG_SPL_PINCTRL=y
>   CONFIG_PINCTRL_SINGLE=y