[PATCH 2/2] mtd: rawnand: atmel: Remove timing from atmel_pmecc struct

[Alexander Dahl]

Hello Michael,

Am Fri, Nov 07, 2025 at 12:04:16PM +0100 schrieb Michael Nazzareno Trimarchi:
> Hi
> 
> On Fri, Nov 7, 2025 at 11:56 AM Eugen Hristev <eugen.hristev at linaro.org> wrote:
> >
> >
> >
> > On 11/6/25 13:12, Zixun LI wrote:
> > > "timing" is unused in atmel_pmecc struct, also it's not exist in Linux
> > > driver, let's remove it.
> > >
> > > Signed-off-by: Zixun LI <admin at hifiphile.com>
> > > ---
> > >  drivers/mtd/nand/raw/atmel/pmecc.c | 2 --
> > >  drivers/mtd/nand/raw/atmel/pmecc.h | 1 -
> > >  2 files changed, 3 deletions(-)
> > >
> > > diff --git a/drivers/mtd/nand/raw/atmel/pmecc.c b/drivers/mtd/nand/raw/atmel/pmecc.c
> > > index 7c4e9bd5f9967b119239adf2b39e683ea62b71fd..8fc5614cc0091d3e0f4b9280beee9e684fe2a57d 100644
> > > --- a/drivers/mtd/nand/raw/atmel/pmecc.c
> > > +++ b/drivers/mtd/nand/raw/atmel/pmecc.c
> > > @@ -839,8 +839,6 @@ atmel_pmecc_create(struct udevice *dev,
> > >       ofnode_read_resource(dev->node_, 1, &res);
> > >       pmecc->regs.errloc = (void *)res.start;
> > >
> > > -     pmecc->regs.timing = 0;
> > > -
> >
> > I see there is also an unused parameter to atmel_pmecc_create() called
> > timing_res_idx .
> > Maybe this parameter was intended to be passed to the timing mapped memory ?
> >
> > If the timing_res_idx is related and unused as well, isn't it supposed
> > to be removed together ?
> >
> > I see it's being called with a hardcoded "2" , does this have any
> > significance that you know of ? Or it can be safely removed.
> >
> > Eugen
> >
> > >       /* pmecc data setup time */
> > >       if (caps->clk_ctrl)
> > >               writel(PMECC_CLK_133MHZ, pmecc->regs.base + ATMEL_PMECC_CLK);
> > > diff --git a/drivers/mtd/nand/raw/atmel/pmecc.h b/drivers/mtd/nand/raw/atmel/pmecc.h
> > > index 43f96b2f168c7b88e0c907996f2ae64f8554ed58..88b0d18040e7c48f226c74ce9b5caf93b5760360 100644
> > > --- a/drivers/mtd/nand/raw/atmel/pmecc.h
> > > +++ b/drivers/mtd/nand/raw/atmel/pmecc.h
> > > @@ -65,7 +65,6 @@ struct atmel_pmecc {
> > >       struct {
> > >               void __iomem *base;
> > >               void __iomem *errloc;
> > > -             void __iomem *timing;
> > >       } regs;
> > >
> > >       /* Mutex used for pmecc enable/disable */
> > >
> >
> I'm willing to help to clock part of nand, can someone point where I
> can buy the board?

I use the Microchip SAM9X60 Curiosity:

https://www.microchip.com/en-us/development-tool/ev40e67a

It's also available from Mouser, RS, Digikey, and probably more.

The NAND flash populated on that board is an MX30LF4G28AD-XKI [1].

Greets
Alex

[1] https://www.mxic.com.tw/en-us/products/NAND-Flash/SLC-NAND-Flash/Pages/spec.aspx?p=MX30LF4G28AD&m=SLC+NAND&n=PM2579