[PATCH] board: xilinx: Retry FRU EEPROM read on timeout

[Michal Simek]

On 11/19/25 09:50, Michal Simek wrote:
> From: Padmarao Begari <padmarao.begari at amd.com>
> 
> Wrap the dm_i2c_read() call is used for FRU EEPROM reads in a
> retry loop, attempting up to EEPROM_FRU_READ_RETRY times if a
> -ETIMEDOUT error is returned. The loop exits immediately on
> success or any error other than -ETIMEDOUT. This improves
> robustness against transient I2C timeouts during FRU detection
> and decoding.
> 
> Signed-off-by: Padmarao Begari <padmarao.begari at amd.com>
> Signed-off-by: Michal Simek <michal.simek at amd.com>
> ---
> 
>   board/xilinx/common/board.c | 12 ++++++++++--
>   1 file changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c
> index 26facb6daeab..4735b6ab58d6 100644
> --- a/board/xilinx/common/board.c
> +++ b/board/xilinx/common/board.c
> @@ -70,6 +70,8 @@ struct efi_capsule_update_info update_info = {
>   #define EEPROM_HDR_ETH_ALEN		ETH_ALEN
>   #define EEPROM_HDR_UUID_LEN		16
>   
> +#define EEPROM_FRU_READ_RETRY		5
> +
>   struct xilinx_board_description {
>   	u32 header;
>   	char manufacturer[EEPROM_HDR_MANUFACTURER_LEN + 1];
> @@ -207,8 +209,14 @@ static int xilinx_read_eeprom_fru(struct udevice *dev, char *name,
>   	debug("%s: I2C EEPROM read pass data at %p\n", __func__,
>   	      fru_content);
>   
> -	ret = dm_i2c_read(dev, 0, (uchar *)fru_content,
> -			  eeprom_size);
> +	i = 0;
> +	do {
> +		ret = dm_i2c_read(dev, 0, (uchar *)fru_content,
> +				  eeprom_size);
> +		if (!ret)
> +			break;
> +	} while (++i < EEPROM_FRU_READ_RETRY && ret == -ETIMEDOUT);
> +
>   	if (ret) {
>   		debug("%s: I2C EEPROM read failed\n", __func__);
>   		goto end;

Applied.
M