[PATCH v2 0/2] mtd: rawnand: atmel: Fix ECC error on SAM9

[Eugen Hristev]

On 11/7/25 17:02, Zixun LI wrote:
> NAND ECC error is observed on SAM9G25 after updating Linux from 3.16 to
> 6.6, due to PMECC setup time config was lost in the driver reworking.[1]
> 
> U-Boot is also affacted as it use the same driver, this patchset backport
> the upstream fix.
> 
> Backported from Linux: f552a7c7e0a1 ("mtd: rawnand: atmel: set pmecc data
> setup time")
> 
> Fixes: a490e1b7c017c ("nand: atmel: Add pmecc driver")
> 
> [1]: https://lore.kernel.org/all/c015bb20-6a57-4f63-8102-34b3d83e0f5b@microchip.com/
> 
> Signed-off-by: Zixun LI <admin at hifiphile.com>
> ---


Applied both to u-boot-at91/master , thanks !