[PATCH v2 1/2] mtd: rawnand: atmel: set pmecc data setup time

[Zixun LI]

Setup the pmecc data setup time as 3 clock cycles for 133MHz as
recommended by the datasheet.

Backported from Linux: f55f552a7c7e0a1 ("mtd: rawnand: atmel: set pmecc
data setup time")

Fixes: a490e1b7c017c ("nand: atmel: Add pmecc driver")

Signed-off-by: Zixun LI <admin at hifiphile.com>
---
 drivers/mtd/nand/raw/atmel/pmecc.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/mtd/nand/raw/atmel/pmecc.c b/drivers/mtd/nand/raw/atmel/pmecc.c
index e500a0fe3f8671ff08195c94c3383696a7731eb3..7c4e9bd5f9967b119239adf2b39e683ea62b71fd 100644
--- a/drivers/mtd/nand/raw/atmel/pmecc.c
+++ b/drivers/mtd/nand/raw/atmel/pmecc.c
@@ -142,6 +142,7 @@ struct atmel_pmecc_caps {
 	int nstrengths;
 	int el_offset;
 	bool correct_erased_chunks;
+	bool clk_ctrl;
 };
 
 struct atmel_pmecc_user_conf_cache {
@@ -840,6 +841,10 @@ atmel_pmecc_create(struct udevice *dev,
 
 	pmecc->regs.timing = 0;
 
+	/* pmecc data setup time */
+	if (caps->clk_ctrl)
+		writel(PMECC_CLK_133MHZ, pmecc->regs.base + ATMEL_PMECC_CLK);
+
 	/* Disable all interrupts before registering the PMECC handler. */
 	writel(0xffffffff, pmecc->regs.base + ATMEL_PMECC_IDR);
 	atmel_pmecc_reset(pmecc);
@@ -884,6 +889,7 @@ static struct atmel_pmecc_caps at91sam9g45_caps = {
 	.strengths = atmel_pmecc_strengths,
 	.nstrengths = 5,
 	.el_offset = 0x8c,
+	.clk_ctrl = true,
 };
 
 static struct atmel_pmecc_caps sama5d4_caps = {

-- 
2.51.0