[PATCH 1/4] corvus: remove green led support

[Quentin Schulz]

From: Quentin Schulz <quentin.schulz at cherry.de>

green_led_on and green_led_off are only called by the legacy LED command
(CONFIG_LED_STATUS_CMD) when CONFIG_LED_STATUS_GREEN is enabled, both of
which aren't enabled for corvus, so let's simply remove it as it's dead
code.

Signed-off-by: Quentin Schulz <quentin.schulz at cherry.de>
---
 board/siemens/corvus/board.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c
index a8714e055d7..670bcab484c 100644
--- a/board/siemens/corvus/board.c
+++ b/board/siemens/corvus/board.c
@@ -53,7 +53,6 @@ static void corvus_request_gpio(void)
 	gpio_request(AT91_PIN_PB18, "SPICS1");
 	gpio_request(AT91_PIN_PB3, "SPICS0");
 	gpio_request(AT91_PIN_PD31, "red led"); /* this is the user1 led */
-	gpio_request(AT91_PIN_PD0, "green led"); /* this is the user2 led */
 }
 
 void red_led_on(void)
@@ -66,16 +65,6 @@ void red_led_off(void)
 	gpio_set_value(AT91_PIN_PD31, 0);
 }
 
-void green_led_on(void)
-{
-	gpio_set_value(AT91_PIN_PD0, 0);
-}
-
-void green_led_off(void)
-{
-	gpio_set_value(AT91_PIN_PD0, 1);
-}
-
 static void corvus_nand_hw_init(void)
 {
 	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;

-- 
2.51.1