[PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL

[Marek Vasut]

On 11/14/25 6:13 PM, Jan Kiszka wrote:
> From: Jan Kiszka <jan.kiszka at siemens.com>
> 
> If U-Boot is located on MMC, SPL and U-Boot proper are glued together.
> More precisely, SPL is stored 4 times. Take this and its padding into
> account and adjust sector number via board_spl_mmc_get_uboot_raw_sector.
> This allows loading from a partition, without the need to hard-code the
> offset via SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
> 
> Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
> ---
>   arch/arm/mach-socfpga/board.c | 9 +++++++++
>   1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach-socfpga/board.c
> index 28554b7a109..d756f7381fb 100644
> --- a/arch/arm/mach-socfpga/board.c
> +++ b/arch/arm/mach-socfpga/board.c
> @@ -14,6 +14,7 @@
>   #include <hang.h>
>   #include <handoff.h>
>   #include <image.h>
> +#include <spl.h>
>   #include <usb.h>
>   #include <usb/dwc2_udc.h>
>   #include <asm/global_data.h>
> @@ -209,3 +210,11 @@ void lmb_arch_add_memory(void)
>   	}
>   }
>   #endif
> +
> +#ifdef CONFIG_SPL
> +unsigned long board_spl_mmc_get_uboot_raw_sector(struct mmc *mmc,
> +						 unsigned long raw_sect)
> +{
> +	return (CONFIG_SPL_PAD_TO * 4) / 512 + raw_sect;
Please add a comment whether this is offset within a partition or within 
a raw block device.

Also, I see the long discussion thread, maybe it would be good to point 
out which commit exactly broken the DE0 board.