[PATCH v2 5/7] arm: dts: k3-am69: ddr: Update to v0.12.0 of DDR config tool

[Neha Malcom Francis]

+ Kevin

On 07/11/25 21:14, Franz Schnyder wrote:
> Hi Neha,
> 
> On Mon, Nov 03, 2025 at 12:40:33PM +0530, Neha Malcom Francis wrote:
>> +#define DDRSS0_CTL_178_DATA 0x35000000
>> +#define DDRSS0_CTL_186_DATA 0x00353500
>> +#define DDRSS0_PI_275_DATA 0x00F30084
>> +#define DDRSS0_PI_281_DATA 0x00F30084
>> +#define DDRSS0_PI_287_DATA 0x00F30084
>> +#define DDRSS0_PI_293_DATA 0x00F30084
>> ....
>> +#define DDRSS1_CTL_178_DATA 0x35000000
>> +#define DDRSS1_CTL_186_DATA 0x00353500
>> +#define DDRSS1_PI_275_DATA 0x00F30084
>> +#define DDRSS1_PI_281_DATA 0x00F30084
>> +#define DDRSS1_PI_287_DATA 0x00F30084
>> +#define DDRSS1_PI_293_DATA 0x00F30084
>> ....
>> +#define DDRSS2_CTL_178_DATA 0x35000000
>> +#define DDRSS2_CTL_186_DATA 0x00353500
>> +#define DDRSS2_PI_275_DATA 0x00F30084
>> +#define DDRSS2_PI_281_DATA 0x00F30084
>> +#define DDRSS2_PI_287_DATA 0x00F30084
>> +#define DDRSS2_PI_293_DATA 0x00F30084
>> ....
>> +#define DDRSS3_CTL_178_DATA 0x35350000
>> +#define DDRSS3_CTL_186_DATA 0x00353535
>> +#define DDRSS3_PI_275_DATA 0x35F30084
>> +#define DDRSS3_PI_281_DATA 0x35F30084
>> +#define DDRSS3_PI_287_DATA 0x35F30084
>> +#define DDRSS3_PI_293_DATA 0x35F30084
> 
> When I compare the updated configuration to the one for our Aquila AM69
> board, I can observe that you have set an on-die termination at boot
> frequency only for DRAM3. DRAM, DRAM1 and DRAM2 do not seem to have any
> termination enabled. Is this a mistake or is it intentional?

Kevin, could you explain the reasoning for this?

> 
> kind regards,
> 
> Franz
> 

-- 
Thanking You
Neha Malcom Francis