[PATCH v3 6/6] remoteproc: k3-r5: Implement is_running operation

[Philippe Schenker]

From: Philippe Schenker <philippe.schenker at impulsing.ch>

Add is_running callback to query the R5F core halt status via the
TI-SCI processor control API. This allows the remoteproc framework
to determine whether the R5F core is currently runnin.

The core is considered running when the PROC_BOOT_CTRL_FLAG_R5_CORE_HALT
bit is not set in the control flags.

Signed-off-by: Philippe Schenker <philippe.schenker at impulsing.ch>

---

Changes in v3:
- Implemented Andrew's suggestion to assign size before casting for
  memory safety.
- Added Anshul's Reviewed-by, thanks!

Changes in v2:
- Made sure there are no build-warnings caused by this series.

 drivers/remoteproc/ti_k3_r5f_rproc.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/remoteproc/ti_k3_r5f_rproc.c b/drivers/remoteproc/ti_k3_r5f_rproc.c
index c6356729e9db..7326f5a4b30b 100644
--- a/drivers/remoteproc/ti_k3_r5f_rproc.c
+++ b/drivers/remoteproc/ti_k3_r5f_rproc.c
@@ -573,6 +573,22 @@ static void *k3_r5f_da_to_va(struct udevice *dev, ulong da, ulong size, bool *is
 	return map_physmem(da, size, MAP_NOCACHE);
 }
 
+static int k3_r5f_is_running(struct udevice *dev)
+{
+	struct k3_r5f_core *core = dev_get_priv(dev);
+	u32 cfg, ctrl, sts;
+	u64 boot_vec;
+	int ret;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	ret = ti_sci_proc_get_status(&core->tsp, &boot_vec, &cfg, &ctrl, &sts);
+	if (ret)
+		return -1;
+
+	return !!(ctrl & PROC_BOOT_CTRL_FLAG_R5_CORE_HALT);
+}
+
 static int k3_r5f_init(struct udevice *dev)
 {
 	return 0;
@@ -590,6 +606,7 @@ static const struct dm_rproc_ops k3_r5f_rproc_ops = {
 	.stop = k3_r5f_stop,
 	.load = k3_r5f_load,
 	.device_to_virt = k3_r5f_da_to_va,
+	.is_running = k3_r5f_is_running,
 };
 
 static int k3_r5f_rproc_configure(struct k3_r5f_core *core)
-- 
2.51.2