[PATCH 03/15] arm: omap2plus: Select REGMAP

[Tom Rini]

On Tue, Nov 18, 2025 at 04:10:24PM +0100, Markus Schneider-Pargmann wrote:
> Hi Tom,
> 
> On Tue Nov 18, 2025 at 3:02 PM CET, Tom Rini wrote:
> > On Tue, Nov 18, 2025 at 11:40:23AM +0100, Markus Schneider-Pargmann (TI.com) wrote:
> >
> >> clk/ti/clk.c is compiled when ARCH_OMAP2PLUS is set and uses regmap
> >> functions. Add REGMAP dependency to prevent linking errors when CLK_TI_*
> >> options are enabled.
> >> 
> >> Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp at baylibre.com>
> >> ---
> >>  arch/arm/Kconfig | 1 +
> >>  1 file changed, 1 insertion(+)
> >> 
> >> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> >> index 3db5474a05b8c08e111e8c8b98c3a6fe68de15f2..c72821ce2131e9d9deebef4fce3757fc68bd9f3f 100644
> >> --- a/arch/arm/Kconfig
> >> +++ b/arch/arm/Kconfig
> >> @@ -844,6 +844,7 @@ config ARCH_OMAP2PLUS
> >>  	bool "TI OMAP2+"
> >>  	select CPU_V7A
> >>  	select GPIO_EXTRA_HEADER
> >> +	select REGMAP
> >>  	select SPL_SOC_INIT if SPL
> >>  	select SPL_STACK_R if SPL
> >>  	select SUPPORT_SPL
> >
> > This belongs with the appropriate CLK entry, and Yegor Yefremov has been
> > fixing some issues along these lines recently as well.
> 
> Yes, that's what I wanted to do, but the functions that use regmap are
> compiled if ARCH_OMAP2PLUS is selected. From drivers/clk/ti/Makefile:
> 
>   obj-$(CONFIG_ARCH_OMAP2PLUS) += clk.o omap4-cm.o
> 
> clk.c is where the required functions are implemented.

That should probably be fixed to if nothing else have its own symbol
under drivers/clk/ti/Kconfig then, if there's not already a good symbol
to be using for them.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20251118/906adca6/attachment.sig>