[PATCH v2] spi-nor: add support for XM25QH01D

[Ssunk]

Hello Marek,

>I'm sorry, my original suggestion was unclear.
>
>If you want to sort the whole XMC part list, then please do 2-patch 
>series, sort the list in patch 1/2 and then add the chip in 2/2 .

Thanks for the clarification!

Actually, I don’t intend to sort the whole XMC flash list — I only want to
add the new XM25QH01D entry. Would it be acceptable if I just place it in the
appropriate position without reordering the rest of the list?

Best regards,
Ssunk

>On 11/3/25 12:12 PM, Ssunk wrote:
>> Add support for the XMC XM25QH01D SPI NOR flash.
>> 
>> This device has 1Gbit (128MB) capacity, with 64KB sectors and
>> supports 4KB erase, dual and quad read modes, and 4-byte opcodes.
>> Datasheet link: https://www.xmcwh.com/uploads/958/XM25QH01D_Ver1.0.pdf
>> 
>> Changes in v2:
>> - Keep the list sorted of XMC
>> 
>> Signed-off-by: Ssunk <ssunkkan at gmail.com>
>> ---
>>   drivers/mtd/spi/spi-nor-ids.c | 5 +++--
>>   1 file changed, 3 insertions(+), 2 deletions(-)
>> 
>> diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
>> index 0383175beb5..03596d38e6e 100644
>> --- a/drivers/mtd/spi/spi-nor-ids.c
>> +++ b/drivers/mtd/spi/spi-nor-ids.c
>> @@ -595,13 +595,14 @@ const struct flash_info spi_nor_ids[] = {
>>   #endif
>>   #ifdef CONFIG_SPI_FLASH_XMC
>>   	/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
>> +	{ INFO("XM25QH01D", 0x204021, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
>>   	{ INFO("XM25QH64A", 0x207017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>>   	{ INFO("XM25QH64C", 0x204017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>>   	{ INFO("XM25QH128A", 0x207018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>> -	{ INFO("XM25QU128C", 0x204118, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>>   	{ INFO("XM25QH256C", 0x204019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
>> -	{ INFO("XM25QU256C", 0x204119, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
>>   	{ INFO("XM25QH512C", 0x204020, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
>> +	{ INFO("XM25QU128C", 0x204118, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>> +	{ INFO("XM25QU256C", 0x204119, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
>>   	{ INFO("XM25QU512C", 0x204120, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
>I'm sorry, my original suggestion was unclear.
>
>If you want to sort the whole XMC part list, then please do 2-patch 
>series, sort the list in patch 1/2 and then add the chip in 2/2 .