[PATCH 21/23] ARM: dts: stm32: Drop "u-boot-led" and "error-led" from stm32mp157c-ed1-u-boot

[Patrice Chotard]

Remove obsolete properties "u-boot, u-boot-led" and "u-boot,error-led"
from stm32mp157cf-ed1-u-boot.dtsi.

Remove led-red and led-blue nodes which are available in kernel DT.
See kernel series: https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=1022570

Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
---

 arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
index 77a65003f53..9ee0204f9fb 100644
--- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
@@ -14,8 +14,6 @@
 	};
 
 	config {
-		u-boot,boot-led = "led-blue";
-		u-boot,error-led = "led-red";
 		u-boot,mmc-env-partition = "fip";
 	};
 
@@ -57,18 +55,6 @@
 			gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
 		};
 	};
-
-	led {
-		compatible = "gpio-leds";
-
-		led-blue {
-			gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-red {
-			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &clk_hse {
-- 
2.43.0