[Uboot-stm32] [PATCH v3 1/7] ofnode: support panel-timings in ofnode_decode_display_timing

[Simon Glass]

Hi Raphael,

On Sun, 2 Nov 2025 at 02:10, Raphaël Gallais-Pou <rgallaispou at gmail.com>
wrote:
>
> Le Sat, Nov 01, 2025 at 10:03:59AM +0100, Simon Glass a écrit :
> > Hi Raphael,
> >
> > On Thu, 4 Sept 2025 at 14:53, Raphael Gallais-Pou
> > <raphael.gallais-pou at foss.st.com> wrote:
> > >
> > > The "Display Timings" in panel-common.yaml can be provided by 2
properties
> > > - panel-timing: when display panels are restricted to a single
resolution
> > >                 the "panel-timing" node expresses the required
timings.
> > > - display-timings: several resolutions with different timings are
supported
> > >                    with several timing subnode of "display-timings"
node
> > >
> > > This patch update the parsing function to handle this 2 possibility
> > > when index = 0.
> > >
> > > Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
> > > Reviewed-by: Yannick Fertre <yannick.fertre at foss.st.com>
> > > Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou at foss.st.com>
> > > ---
> > >  drivers/core/ofnode.c | 17 ++++++++++-------
> > >  1 file changed, 10 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c
> > > index
e040e3f2806ffe74c58dcd82f36307351acd5a99..5a721b46e5a3214e7bd437739776362c2d22a3c9
100644
> > > --- a/drivers/core/ofnode.c
> > > +++ b/drivers/core/ofnode.c
> > > @@ -1221,13 +1221,16 @@ int ofnode_decode_display_timing(ofnode
parent, int index,
> > >         int ret = 0;
> > >
> > >         timings = ofnode_find_subnode(parent, "display-timings");
> > > -       if (!ofnode_valid(timings))
> > > -               return -EINVAL;
> > > -
> > > -       i = 0;
> > > -       ofnode_for_each_subnode(node, timings) {
> > > -               if (i++ == index)
> > > -                       break;
> > > +       if (ofnode_valid(timings)) {
> > > +               i = 0;
> > > +               ofnode_for_each_subnode(node, timings) {
> > > +                       if (i++ == index)
> > > +                               break;
> > > +               }
> > > +       } else {
> > > +               if (index != 0)
> > > +                       return -EINVAL;
> > > +               node = ofnode_find_subnode(parent, "panel-timing");
> > >         }
> > >
> > >         if (!ofnode_valid(node))
> > >
> > > --
> > > 2.25.1
> > >
> >
> > Please add a test for this in test/dm/ofnode.c
>
> Hi Simon,
>
> I'll gladly do that, but I haven't write and use any test in U-Boot.  So
> it is a bit foggy how to implement it.

There is some info here:

https://docs.u-boot.org/en/latest/develop/testing.html

>
> Do we want to create a fake device-tree and test each configuration or
> do we want to test in the _current_ device-tree if timings are correctly
> set according to the index value ?

It looks like there is a 'display-timings' node in test.dts, with three
subnodes, so you should just be able to get an ofnode for that and then
read out one of them and check it.

Regards,
Simon