[PATCH] configs: rockchip: Enable RK806 PMIC on rk3588-evb

[Chaoyi Chen]

Hi Quentin,

On 11/19/2025 5:52 PM, Quentin Schulz wrote:
> Hi Chaoyi Chen,
>
> On 11/19/25 2:55 AM, Chaoyi Chen wrote:
>> From: Chaoyi Chen <chaoyi.chen at rock-chips.com>
>>
>> Some pmdomains rely on RK806 PMIC for power supply. If we don't
>> enable them in U-Boot, random panic may occur during the Kernel
>> boot process.
>>
>
> The kernel shouldn't rely on U-Boot doing something to work, so please fix this with upstream Linux kernel.
>
> Can you tell us what's the issue?
>
> The issue with this patch here is that we probably would need **all** RK3588 boards to have the PMIC enabled, and all the appropriate regulators brought up before booting into the kernel. It'd be *much* better this is fixed in Linux (and depending on what we're talking about, it may need another fix in U-Boot so that whatever depends on the PM domain works as well).
>
> Also, why the PMIC in SPL but not the regulators?

It make sense, but I haven't thought of a specific solution for Kernel yet.

To be specific, I'm trying to get RKVENC to work. It uses an independent power domain. If RK806 is not enabled in U-Boot, the first power-up attempt for the pmdomain corresponding to RKVENC will fail in the Kernel.

And essentially, the operations of pmdomains in the Kernel are dependent on regulators. But it seems that pmdomains driver haven't dealt with this. I have seen some cases, but it seems that the dependency issue has not been fully resolved [0].


[0]: https://lore.kernel.org/all/20250909111130.132976-3-ulf.hansson@linaro.org/

>
> Cheers,
> Quentin
>
>
-- 
Best,
Chaoyi