[PATCH] net: axi_emac: Fix compilation warnings
Michal Simek
michal.simek at amd.com
Fri Nov 7 11:13:23 CET 2025
From: Sai Varun Venkatapuram <saivarun.venkatapuram at amd.com>
Fix compiler warnings about casting integers to pointers of different
sizes by using uintptr_t as intermediate type. This ensures proper
type conversion across 32-bit and 64-bit architectures.
Signed-off-by: Sai Varun Venkatapuram <saivarun.venkatapuram at amd.com>
Signed-off-by: Michal Simek <michal.simek at amd.com>
---
drivers/net/xilinx_axi_emac.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c
index 22e119370c84..fb48feb4469a 100644
--- a/drivers/net/xilinx_axi_emac.c
+++ b/drivers/net/xilinx_axi_emac.c
@@ -619,11 +619,11 @@ static int axiemac_start(struct udevice *dev)
#endif
rx_bd.cntrl = sizeof(rxframe);
/* Flush the last BD so DMA core could see the updates */
- flush_cache((phys_addr_t)&rx_bd, sizeof(rx_bd));
+ flush_cache((phys_addr_t)(uintptr_t)&rx_bd, sizeof(rx_bd));
/* It is necessary to flush rxframe because if you don't do it
* then cache can contain uninitialized data */
- flush_cache((phys_addr_t)&rxframe, sizeof(rxframe));
+ flush_cache((phys_addr_t)(uintptr_t)&rxframe, sizeof(rxframe));
/* Start the hardware */
temp = readl(&priv->dmarx->control);
@@ -675,7 +675,7 @@ static int axiemac_send(struct udevice *dev, void *ptr, int len)
}
/* Flush packet to main memory to be trasfered by DMA */
- flush_cache((phys_addr_t)ptr, len);
+ flush_cache((phys_addr_t)(uintptr_t)ptr, len);
/* Setup Tx BD */
memset(&tx_bd, 0, sizeof(tx_bd));
@@ -691,7 +691,7 @@ static int axiemac_send(struct udevice *dev, void *ptr, int len)
XAXIDMA_BD_CTRL_TXEOF_MASK;
/* Flush the last BD so DMA core could see the updates */
- flush_cache((phys_addr_t)&tx_bd, sizeof(tx_bd));
+ flush_cache((phys_addr_t)(uintptr_t)&tx_bd, sizeof(tx_bd));
if (readl(&priv->dmatx->status) & XAXIDMA_HALTED_MASK) {
u32 temp;
@@ -791,11 +791,11 @@ static int axiemac_free_pkt(struct udevice *dev, uchar *packet, int length)
rx_bd.cntrl = sizeof(rxframe);
/* Write bd to HW */
- flush_cache((phys_addr_t)&rx_bd, sizeof(rx_bd));
+ flush_cache((phys_addr_t)(uintptr_t)&rx_bd, sizeof(rx_bd));
/* It is necessary to flush rxframe because if you don't do it
* then cache will contain previous packet */
- flush_cache((phys_addr_t)&rxframe, sizeof(rxframe));
+ flush_cache((phys_addr_t)(uintptr_t)&rxframe, sizeof(rxframe));
/* Rx BD is ready - start again */
axienet_dma_write(&rx_bd, &priv->dmarx->tail);
@@ -831,10 +831,10 @@ static int axi_emac_probe(struct udevice *dev)
struct axidma_priv *priv = dev_get_priv(dev);
int ret;
- priv->iobase = (struct axi_regs *)pdata->iobase;
+ priv->iobase = (struct axi_regs *)(uintptr_t)pdata->iobase;
priv->dmatx = plat->dmatx;
/* RX channel offset is 0x30 */
- priv->dmarx = (struct axidma_reg *)((phys_addr_t)priv->dmatx + 0x30);
+ priv->dmarx = (struct axidma_reg *)((uintptr_t)priv->dmatx + 0x30);
priv->mactype = plat->mactype;
if (priv->mactype == EMAC_1G) {
--
2.43.0
base-commit: 2bcc9e92f6531ae9b75420eb1c7640a34d03a993
branch: vek385
More information about the U-Boot
mailing list