[PATCH v2 5/6] remoteproc: k3-r5: Use verified image address

[Philippe Schenker]

From: Philippe Schenker <philippe.schenker at impulsing.ch>

After ti_secure_image_post_process() authenticates the image, it may
relocate it to a different memory location and update image_addr to
point to the verified image.

However, rproc_elf_load_image() and rproc_elf_get_boot_addr() were
still using the original "addr" parameter, potentially operating on
the unverified or stale image location instead of the authenticated
image.

Use image_addr (cast to ulong to match function signatures) after
authentication to ensure all operations work with the verified image.

Signed-off-by: Philippe Schenker <philippe.schenker at impulsing.ch>
---

(no changes since v1)

 drivers/remoteproc/ti_k3_r5f_rproc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/remoteproc/ti_k3_r5f_rproc.c b/drivers/remoteproc/ti_k3_r5f_rproc.c
index e7bd97a9088b..36ea449f5121 100644
--- a/drivers/remoteproc/ti_k3_r5f_rproc.c
+++ b/drivers/remoteproc/ti_k3_r5f_rproc.c
@@ -343,13 +343,13 @@ static int k3_r5f_load(struct udevice *dev, ulong addr, ulong size)
 
 	ti_secure_image_post_process(&image_addr, (size_t *)&size);
 
-	ret = rproc_elf_load_image(dev, addr, size);
+	ret = rproc_elf_load_image(dev, (ulong)image_addr, size);
 	if (ret < 0) {
 		dev_err(dev, "Loading elf failedi %d\n", ret);
 		goto proc_release;
 	}
 
-	boot_vector = rproc_elf_get_boot_addr(dev, addr);
+	boot_vector = rproc_elf_get_boot_addr(dev, (ulong)image_addr);
 
 	dev_dbg(dev, "%s: Boot vector = 0x%llx\n", __func__, boot_vector);
 
-- 
2.51.2