[PATCH 1/2] sandbox: Fix DT compiler address warnings in sandbox DTs

[Tom Rini]

On Thu, 13 Nov 2025 12:56:29 +0100, Marek Vasut wrote:

> Trivially fix the following warnings in sandbox DTs, which show up with
> DTC 1.7.2. Fill in the missing address and adjust emulated I2C address
> to fit the 7bit address limit:
> 
> "
> arch/sandbox/dts/sandbox.dtsi:138.30-140.5: Warning (i2c_bus_reg): /i2c at 0/sandbox_pmic: I2C bus unit address format error, expected "40"
> arch/sandbox/dts/sandbox.dtsi:146.18-161.5: Warning (i2c_bus_reg): /i2c at 0/emul: I2C bus unit address format error, expected "ff"
> arch/sandbox/dts/sandbox.dtsi:148.4-17: Warning (i2c_bus_reg): /i2c at 0/emul:reg: I2C address must be less than 7-bits, got "0xff". Set I2C_TEN_BIT_ADDRESS for 10 bit addresses or fix the property
> "
> 
> [...]

Applied to u-boot/next, thanks!

[1/2] sandbox: Fix DT compiler address warnings in sandbox DTs
      commit: 9bde0c1da52e9421c84fa622849d85dbb77603e6
[2/2] sandbox: Fix DT compiler pin warnings in sandbox DTs
      commit: 416ceee82f7abe4065446a0b97252c8c1573438c
-- 
Tom