[PATCH] imx9: scmi: soc: USB instance number change for silicon revision B0

[Fedor Ross]

For silicon revision A1, the USB instance number for USB1 is 3 and for
USB2 it is 4. This changed for revision B0 where the USB instance number
for USB1 is 0 and for USB2 it is 1, which is the intended instance
number. Select the correct numbering according to the selected revision
in the defconfig. The config for the B0 revision is IMX95 and for A1 it
is IMX95_A0.

This patch is based on the information provided by:
"AN14750 Migration Guide from i.MX 95 A1 to B0; Rev. 1.0" .

Signed-off-by: Fedor Ross <fedor.ross at ifm.com>
---
 arch/arm/mach-imx/imx9/scmi/soc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/imx9/scmi/soc.c b/arch/arm/mach-imx/imx9/scmi/soc.c
index dbaa19a9e6e..354df7d88a4 100644
--- a/arch/arm/mach-imx/imx9/scmi/soc.c
+++ b/arch/arm/mach-imx/imx9/scmi/soc.c
@@ -921,7 +921,7 @@ enum boot_device get_boot_device(void)
 		break;
 	case BT_DEV_TYPE_USB:
 		boot_dev = boot_instance + USB_BOOT;
-		if (IS_ENABLED(CONFIG_IMX95))
+		if (IS_ENABLED(CONFIG_IMX95_A0))
 			boot_dev -= 3; //iMX95 usb instance start at 3
 		break;
 	default:

---
base-commit: 962711498ddac6179f1d1f3fa123397ba02a381b
change-id: 20251127-imx95_b0-e58113e102cb

Best regards,
-- 
Fedor Ross <fedor.ross at ifm.com>