[PATCH v2 03/10] sunxi: a733: uart: setup serial console

[Yixun Lan]

Setup correct UART base address for A733 SoC.

According to Allwinner's board design, A733 SoC use the UART0 port
for serial console, so config PB9-10 pins to setup pinmux.

Signed-off-by: Yixun Lan <dlan at gentoo.org>
---
 arch/arm/mach-sunxi/board.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 432b1c10f92..72c9fc413cb 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -141,7 +141,8 @@ static int gpio_init(void)
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN50I_H616_GPH_UART0);
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN50I_H616_GPH_UART0);
 	sunxi_gpio_set_pull(SUNXI_GPB(10), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN55I_A523)
+#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN55I_A523) || \
+				defined(CONFIG_MACH_SUN60I_A733))
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(9), 2);
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(10), 2);
 	sunxi_gpio_set_pull(SUNXI_GPB(10), SUNXI_GPIO_PULL_UP);

-- 
2.51.2