[PATCH v2 3/4] Gitlab: sage: Add Pine64+ platform

[Tom Rini]

This adds the Pine64+ platform to the sage lab, for both legacy and lwIP
networking stacks. In order to build this platform we need to copy
certain files that were built in the container to /tmp and then set
BINMAN_INDIRS to /tmp in order to find them when building.

For now, we disable the test_net_pxe_boot_config test on lwIP as it
leads to a crash that needs to be investigated.

Signed-off-by: Tom Rini <trini at konsulko.com>
---
Cc: Andre Przywara <andre.przywara at arm.com>
Cc: Jerome Forissier <jerome.forissier at linaro.org>

Andre, Jerome, how would you like to handle looking in to this issue?
https://source.denx.de/u-boot/u-boot/-/jobs/1303375#L2235 shows the
crash and I don't have enough sunxi targets to know if this is more
broadly breakable or not. But it doesn't happen on lwIP + Pi for
example, nor lwIP + Hummingboard (mx6cuboxi defconfig). I can't at this
point give remote access to the lab directly, but I can help come up
with a gitlab job that'll acquire the board, build and try and boot
whatever you have.
---
 .gitlab-ci-sage-lab.yml | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

diff --git a/.gitlab-ci-sage-lab.yml b/.gitlab-ci-sage-lab.yml
index fa7d79668b2c..815c93087f4f 100644
--- a/.gitlab-ci-sage-lab.yml
+++ b/.gitlab-ci-sage-lab.yml
@@ -35,14 +35,21 @@
     # Prepare ssh
     - mkdir --mode=0700 ~/.ssh;
       printf 'Host sage-exporter-*\n\tUser labgrid\n' > ~/.ssh/config
+    # If we have TF-A binaries, we need to use them.
+    - if [[ -d /opt/tf-a/${TEST_PY_BD}${TEST_PY_ID//--id /_} ]]; then
+        cp /opt/tf-a/${TEST_PY_BD}${TEST_PY_ID//--id /_}/* /tmp/;
+      elif [[ -d /opt/tf-a/${TEST_PY_BD} ]]; then
+        cp /opt/tf-a/${TEST_PY_BD}/* /tmp/;
+      fi;
+      export BINMAN_INDIRS=/tmp;
   script:
     - export UBOOT_TRAVIS_BUILD_DIR=/tmp/${TEST_PY_BD}
     # Don't stop on non-zero exit codes now, to provide as much chance as
     # possible to ensure we don't leave lab resources acquired.
     - set +e;
-    # Sage is 16 threads and has 3 devices attached, so 6 builder threads.
+    # Sage is 16 threads and has 4 devices attached, so 4 builder threads.
     - tools/buildman/buildman -o ${UBOOT_TRAVIS_BUILD_DIR} -w -E -W -e
-        --board ${TEST_PY_BD} ${OVERRIDE} -T 6;
+        --board ${TEST_PY_BD} ${OVERRIDE} -T 4;
       RC=`echo $?`;
     # Wait for the exporter to have the device ready
     - while test `labgrid-client resources |
@@ -79,6 +86,25 @@
       junit: results.xml
     expire_in: 1 week
 
+Pine64+:
+  <<: *sage_lab_dfn
+  variables:
+    LABGRID_EXPORTER: "sage-exporter-pine64-1"
+    LG_PLACE: "pine64-1"
+    TEST_PY_BD: "pine64_plus"
+    OVERRIDE: "-a CMD_BOOTMENU -a CMD_LOG"
+
+Pine64+ (lwIP):
+  <<: *sage_lab_dfn
+  needs: [ "Pine64+" ]
+  variables:
+    LABGRID_EXPORTER: "sage-exporter-pine64-1"
+    LG_PLACE: "pine64-1"
+    TEST_PY_BD: "pine64_plus"
+    # Leads to crash on lwIP, needs investigation.
+    TEST_PY_TEST_SPEC: "not test_net_pxe_boot_config"
+    OVERRIDE: "-a CMD_BOOTMENU -a CMD_LOG -a NET_LWIP"
+
 SolidRun Hummingboard 2:
   <<: *sage_lab_dfn
   variables:
-- 
2.43.0