[PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL

[Jan Kiszka]

On 25.11.25 11:17, Sune Brian wrote:
> Hi Jan,
> 
> To be honest, it has nothing to do with the board.
>> Different boards.
> 
> deconfig itself also requires alteration from first place.
> As of early this year the boot detection, so any sync
> patch had been pushed?
> The detection is completely universal on cyclone V HPS.
> Unless you have the power to reload the HPS bootloader.
> 
> But long story short, I did not have any issue on
> Cyclone V socdk
> Custom board two variants on size.
> "小梅哥SOC Cyclone V" by china vendor.
> Which this board is a clone of DE0 nano

Strange that it booted then. Maybe you happen to work around the wrong
offsets by adjusting your partition layout, rather than by teaching the
SPL to load according to the actual layout.

> 
> So I cannot see how DE0 can have such power to defer.
> So long story short this patch is not really a must.
> 

The whole series seems to look for new owners if I read [1] (even if
that patch is incomplete yet) - though it contains valid fixed IMHO.

Jan

[1]
https://lore.kernel.org/u-boot/808832bf-e185-43f0-89ba-58941d2535c9@siemens.com/T/#u

-- 
Siemens AG, Foundational Technologies
Linux Expert Center