[PATCH v3 5/5] configs: j784s4_evm_a72_defconfig: Enable configs for PCIe boot

[Hrushikesh Salunke]

J784S4 SoC has two instances of PCIe, namely PCIe0 and PCIe1. The
PCIe1 instance is used for PCIe endpoint boot. Enable the configs
required for PCIe boot on the J784S4 platform.

Signed-off-by: Hrushikesh Salunke <h-salunke at ti.com>
---
 configs/j784s4_evm_a72_defconfig | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/configs/j784s4_evm_a72_defconfig b/configs/j784s4_evm_a72_defconfig
index fc7acbae694..face831797b 100644
--- a/configs/j784s4_evm_a72_defconfig
+++ b/configs/j784s4_evm_a72_defconfig
@@ -46,9 +46,16 @@ CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_PCI_ENDPOINT=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_PCI_DFU=y
+CONFIG_SPL_PCI_DFU_SPL_LOAD_FIT_ADDRESS=0x81000000
+CONFIG_SPL_PCI_DFU_BAR_SIZE=0x400000
+CONFIG_SPL_PCI_DFU_VENDOR_ID=0x104c
+CONFIG_SPL_PCI_DFU_DEVICE_ID=0xb012
+CONFIG_SPL_PCI_DFU_BOOT_PHASE="tispl.bin"
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
-- 
2.34.1