[PATCH] Gitlab: Add a "sage-lab" stage to access a board farm

[Tom Rini]

On Tue, Nov 11, 2025 at 05:58:22AM -0700, Simon Glass wrote:
> Hi Tom,
> 
> On Mon, 10 Nov 2025 at 08:42, Tom Rini <trini at konsulko.com> wrote:
> >
> > This is the Gitlab side of adding support for the board lab connected to
> > the "konsulko-sage" runner. On the software side, this lab uses only
> > upstream labgrid. On the hardware side, each device under test is
> > connected to its own exporter (typically a Raspberry Pi 4) that must be
> > turned on (and cleanly turned off) as part of a given test cycle.
> >
> > Add support for testing on a SolidRun Hummingboard 2 (imx6), Raspberry
> > Pi 3 and Raspberry Pi 4. In all cases, we enable additional options to
> > run more tests on the board. As we have some networking tests, we test
> > both the legacy network stack and lwIP. In the case of Pi platforms, we
> > test all of 32bit configuration, plain configuration and rpi_arm64, and
> > again with and without lwIP.
> >
> > Signed-off-by: Tom Rini <trini at konsulko.com>
> > ---
> > Note that for the Pi platforms we enable/disable CMD_BOOTEFI_SELFTEST
> > based on overall binary size. I've created
> > https://source.denx.de/u-boot/custodians/u-boot-raspberrypi/-/issues/2
> > to track addressing that issue.
> > ---
> >  .gitlab-ci-sage-lab.yml | 182 ++++++++++++++++++++++++++++++++++++++++
> >  .gitlab-ci.yml          |   5 ++
> >  2 files changed, 187 insertions(+)
> >  create mode 100644 .gitlab-ci-sage-lab.yml
> 
> Would it be possible to add some docs about this? Does the exporting
> rpi do a full system boot and then run some scripts to load things
> onto the board, then shut down?

I don't understand your question. Yes, the exporter is powered on/off in
the test job, as explained in the commit message. When it comes up it
registers the device under test with the coordinator (and unregisters
when powering off).

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20251111/1167b311/attachment.sig>