[PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support

[Sune Brian]

> I shared our wks file [1]: We create a raw partition in a legacy msdos
> table, set its system ID to 0xa2 (via [2] when we use a hybrid partition
> table, or classically [3] before that), and put u-boot-with-spl.sfp into
> it. SPL is picked up by the romloader, but SPL in upstream completely
> fails to find u-boot proper in that partition. And that is first of all
> because SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is enabled by default which
> ignores any partitioning and only uses a hard-coded sector. If one
> switches to SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE mode, other
> bugs after 2a00d73d081a surface like no longer built code or wrong
> offsets inside the partition, and you also end up without u-boot proper
> being found. Whatever other partitions or partition tables exist on the
> SD card does not matter for SPL loading u-boot proper.

Ha Now I see what you encounter.
No wonder. Because it is not supposed to run like that.
(i am no software experts)

I might be wrong, no shame on that I do simple software only.

So what T.F. had mentioned all aligned will all my build and
no additional patch is required from first place.

All there TYPE, #, OFFSET can work.
because it never uses the old method of combining.

A2 <- only SPL
FAT (boot) <- u-boot.img

Actually I mentioned this yesterday in our discussion. Maybe you
skipped that important information.

All board defconfig after 2025.05 is outdated; no one syncs those.

That's why I comment that the file "u-boot-with-spl.sfp" is misleading.
You have to turn on "FAT filesystems" change MMC boot partition
accordingly.

This is why I say this patch is not a must and combining SPL+UBOOT
to A2 is not really needed but only for backward build flow compatibility
concerns.

Bests,
Brian