[PATCH] mmc: cv1800b_sdhci: Fix possible warning with MMC_SUPPORTS_TUNING=n

[Tom Rini]

The function cv1800b_set_tap_delay is only called by
cv1800b_execute_tuning. The latter is where we currently have the #if
guard around MMC_SUPPORTS_TUNING, and so with the option disabled we
have an unused function warning. Move the guard to cover both functions.

Signed-off-by: Tom Rini <trini at konsulko.com>
---
 drivers/mmc/cv1800b_sdhci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/cv1800b_sdhci.c b/drivers/mmc/cv1800b_sdhci.c
index 377e6a887df5..036e798f3741 100644
--- a/drivers/mmc/cv1800b_sdhci.c
+++ b/drivers/mmc/cv1800b_sdhci.c
@@ -19,6 +19,7 @@ struct cv1800b_sdhci_plat {
 	struct mmc mmc;
 };
 
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 static void cv1800b_set_tap_delay(struct sdhci_host *host, u16 tap)
 {
 	sdhci_writel(host, PHY_TX_SRC_INVERT | tap << 16, SDHCI_PHY_TX_RX_DLY);
@@ -31,7 +32,6 @@ static void cv1800b_sdhci_reset(struct sdhci_host *host, u8 mask)
 		udelay(10);
 }
 
-#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 static int cv1800b_execute_tuning(struct mmc *mmc, u8 opcode)
 {
 	struct sdhci_host *host = dev_get_priv(mmc->dev);
-- 
2.43.0