October 2025 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Oct 1 01:08:49 CEST 2025
Ending: Fri Oct 31 06:34:25 CET 2025
Messages: 2538

• activity-led usage   Simon Glass
  • activity-led usage   Yegor Yefremov
    • activity-led usage   Heiko Schocher
      • activity-led usage   Yegor Yefremov
      • activity-led usage   Heiko Schocher
      • activity-led usage   Yegor Yefremov
    • activity-led usage   Marek Vasut
• [PULL] Pull request for u-boot master / v2025.10 = u-boot-stm32-20250930   Tom Rini
• [GIT PULL] Please pull u-boot-amlogic-next-20250930   Tom Rini
• [PATCH v2 1/3] apple: Set up file system firmware loader   Marek Vasut
• [PATCH v3] usb: onboard-hub: Make i2c-bus option   Michal Simek
  • [PATCH v3] usb: onboard-hub: Make i2c-bus option   Marek Vasut
    • [PATCH v3] usb: onboard-hub: Make i2c-bus option   Michal Simek
• [PATCH] spi: cadence-qspi: Remove cdns,is-dma property handling   Michal Simek
• [PATCH] doc: pytest: Fix inline code and other formatting   Martin Schwan
• [PATCH] cmd: ti: Add DDRSS ECC test command   Neha Malcom Francis
  • [PATCH] cmd: ti: Add DDRSS ECC test command   Kumar, Udit
    • [PATCH] cmd: ti: Add DDRSS ECC test command   Neha Malcom Francis
• [PATCH v4 2/4] power-domain: Add QCOM RPMH Power Domain Driver Support   neil.armstrong at linaro.org
  • [PATCH v4 2/4] power-domain: Add QCOM RPMH Power Domain Driver Support   neil.armstrong at linaro.org
    • [PATCH v4 2/4] power-domain: Add QCOM RPMH Power Domain Driver Support   Casey Connolly
      • [PATCH v4 2/4] power-domain: Add QCOM RPMH Power Domain Driver Support   Aswin Murugan
  • [PATCH v4 2/4] power-domain: Add QCOM RPMH Power Domain Driver Support   neil.armstrong at linaro.org
• [PATCH] b4-config: Improve b4 config for correct operation   Andrew Goodbody
  • [PATCH] b4-config: Improve b4 config for correct operation   Tom Rini
  • [PATCH] b4-config: Improve b4 config for correct operation   Tom Rini
  • [PATCH] b4-config: Improve b4 config for correct operation   Quentin Schulz
    • [PATCH] b4-config: Improve b4 config for correct operation   Andrew Goodbody
• [PATCH] video: nexell: unsigned parameter cannot be negative   Andrew Goodbody
  • [PATCH] video: nexell: unsigned parameter cannot be negative   Stefan Bosch
• Smatch reported issue in Rockchip video   Andrew Goodbody
• [PATCH] video: rockchip: Set return code   Andrew Goodbody
• [PATCH] clk: ti: Tighten some TI clock driver dependencies   Chawdhry, Manorit
  • [PATCH] clk: ti: Tighten some TI clock driver dependencies   Tom Rini
    • [PATCH] clk: ti: Tighten some TI clock driver dependencies   Chawdhry, Manorit
• [PATCH 0/2] video: tegra: Address some Smatch issues   Andrew Goodbody
  • [PATCH 1/2] video: tegra: Remove unreachable code   Andrew Goodbody
    • [PATCH 1/2] video: tegra: Remove unreachable code   Thierry Reding
    • [PATCH 1/2] video: tegra: Remove unreachable code   Svyatoslav Ryhel
  • [PATCH 2/2] video: tegra: Incorrect operator used   Andrew Goodbody
    • [PATCH 2/2] video: tegra: Incorrect operator used   Thierry Reding
    • [PATCH 2/2] video: tegra: Incorrect operator used   Svyatoslav Ryhel
• [PATCH v1 0/2] configs: verdin-am*: enable USB Gadget OS Descriptors   Emanuele Ghidoli
  • [PATCH v1 1/2] configs: verdin-am62: enable USB Gadget OS Descriptors for fastboot   Emanuele Ghidoli
  • [PATCH v1 2/2] configs: verdin-am62p: enable USB Gadget OS Descriptors for fastboot   Emanuele Ghidoli
  • [PATCH v1 0/2] configs: verdin-am*: enable USB Gadget OS Descriptors   Tom Rini
• [PATCH v1 0/4] configs: toradex: enable USB Gadget OS Descriptors   Emanuele Ghidoli
  • [PATCH v1 1/4] configs: apalis-imx6: enable USB Gadget OS Descriptors for fastboot   Emanuele Ghidoli
  • [PATCH v1 2/4] configs: colibri-*: enable USB Gadget OS Descriptors for fastboot   Emanuele Ghidoli
  • [PATCH v1 3/4] configs: verdin-imx8m[mp]: enable USB Gadget OS Descriptors for fastboot   Emanuele Ghidoli
  • [PATCH v1 4/4] configs: toradex-smarc-imx8mp: enable USB Gadget OS Descriptors for fastboot   Emanuele Ghidoli
  • [PATCH v1 0/4] configs: toradex: enable USB Gadget OS Descriptors   Tom Rini
• Smatch reports for zynqmp video driver   Andrew Goodbody
  • Smatch reports for zynqmp video driver   Michal Simek
    • Smatch reports for zynqmp video driver   Andrew Goodbody
• [GIT PULL] Please pull u-boot-dfu-next-20251001 into next   Mattijs Korpershoek
  • [GIT PULL] Please pull u-boot-dfu-next-20251001 into next   Tom Rini
• Transfer List Checksum Correction and Impact on Bloblist   Raymond Mao
  • Transfer List Checksum Correction and Impact on Bloblist   Harrison Mutai
  • Transfer List Checksum Correction and Impact on Bloblist   Harrison Mutai
• [PATCH v4 3/6] bootm: Append bootargs value when bootmeth_android provide cmdline   Simon Glass
  • [PATCH v4 3/6] bootm: Append bootargs value when bootmeth_android provide cmdline   george chan
    • [PATCH v4 3/6] bootm: Append bootargs value when bootmeth_android provide cmdline   george chan
      • [PATCH v4 3/6] bootm: Append bootargs value when bootmeth_android provide cmdline   Simon Glass
      • [PATCH v4 3/6] bootm: Append bootargs value when bootmeth_android provide cmdline   george chan
      • [PATCH v4 3/6] bootm: Append bootargs value when bootmeth_android provide cmdline   Simon Glass
      • [PATCH v4 3/6] bootm: Append bootargs value when bootmeth_android provide cmdline   Mattijs Korpershoek
      • [PATCH v4 3/6] bootm: Append bootargs value when bootmeth_android provide cmdline   george chan
      • [PATCH v4 3/6] bootm: Append bootargs value when bootmeth_android provide cmdline   george chan
• [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Simon Glass
  • [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Aristo Chen
• [PATCH] video: zynqmp: Prevent use of uninitialised variables   Andrew Goodbody
  • [PATCH] video: zynqmp: Prevent use of uninitialised variables   Michal Simek
• [PATCH] gpio: Remove FTGPIO0010 driver   Tom Rini
  • [PATCH] gpio: Remove FTGPIO0010 driver   Tom Rini
• [PATCH] dts: Set a default value for DEFAULT_DEVICE_TREE for SANDBOX   Tom Rini
  • [PATCH] dts: Set a default value for DEFAULT_DEVICE_TREE for SANDBOX   Tom Rini
• [PATCH] sandbox: Expand the BOOT_DEVICE enum   Tom Rini
• [PATCH] sandbox: Rework readX/writeX macros to be more like ARM   Tom Rini
  • [PATCH] sandbox: Rework readX/writeX macros to be more like ARM   Tom Rini
• [PATCH] timer: Tighten dependencies on MCHP_PIT64B_TIMER   Tom Rini
  • [PATCH] timer: Tighten dependencies on MCHP_PIT64B_TIMER   Eugen Hristev
  • [PATCH] timer: Tighten dependencies on MCHP_PIT64B_TIMER   Tom Rini
• [PATCH] watchdog: Tighten dependencies on WDT_DAVINCI   Tom Rini
  • [PATCH] watchdog: Tighten dependencies on WDT_DAVINCI   Stefan Roese
• [PATCH] mmc: Fix a potential warning in xPL   Tom Rini
• [PATCH] net: dwc_eth_ops: Correct check for FDT_64BIT   Tom Rini
  • [PATCH] net: dwc_eth_ops: Correct check for FDT_64BIT   Jerome Forissier
• [PATCH] video: Add SPL_VIDEO_SYNC_CYCLIC_MS symbol   Tom Rini
  • [PATCH] video: Add SPL_VIDEO_SYNC_CYCLIC_MS symbol   Tom Rini
• [PATCH] video: Only build bridge code for the appropriate phase   Tom Rini
  • [PATCH] video: Only build bridge code for the appropriate phase   Tom Rini
• [PATCH] dts: Make xPL_OF_PLATDATA depend on !COMPILE_TEST   Tom Rini
• [PATCH] uthreads: Make use of CONFIG_IS_ENABLED consistently   Tom Rini
  • [PATCH] uthreads: Make use of CONFIG_IS_ENABLED consistently   Jerome Forissier
• [PATCH] iotrace: Finish migrating this to Kconfig   Tom Rini
  • [PATCH] iotrace: Finish migrating this to Kconfig   Tom Rini
• [PATCH] xPL: Make NAND_SUPPORT depend on !COMPILE_TEST   Tom Rini
• [PATCH] spl: spl_sata: Add __maybe_unused decorator   Tom Rini
  • [PATCH] spl: spl_sata: Add __maybe_unused decorator   Tom Rini
• [PATCH] clk: sophgo: Fix a warning about void returns value   Tom Rini
  • [PATCH] clk: sophgo: Fix a warning about void returns value   Yao Zi
• [PATCH] boot: vbe: Make BOOTMETH_VBE_xxx a choice   Tom Rini
  • [PATCH] boot: vbe: Make BOOTMETH_VBE_xxx a choice   Simon Glass
    • [PATCH] boot: vbe: Make BOOTMETH_VBE_xxx a choice   Tom Rini
      • [PATCH] boot: vbe: Make BOOTMETH_VBE_xxx a choice   Simon Glass
      • [PATCH] boot: vbe: Make BOOTMETH_VBE_xxx a choice   Tom Rini
• [PATCH] lz4: Do not disable LZ4_decompress_safe* for xPL   Tom Rini
  • [PATCH] lz4: Do not disable LZ4_decompress_safe* for xPL   Tom Rini
• [PATCH] fs: Rework filesystem guards for xPL phases   Tom Rini
  • [PATCH] fs: Rework filesystem guards for xPL phases   Tom Rini
• [PATCH v2 00/17] boot: Support priority for global bootmeths   Simon Glass
  • [PATCH v2 01/17] boot: Improve comments related to global bootmeths   Simon Glass
    • [PATCH v2 01/17] boot: Improve comments related to global bootmeths   Heinrich Schuchardt
    • [PATCH v2 01/17] boot: Improve comments related to global bootmeths   Tom Rini
  • [PATCH v2 02/17] boot: Try all bootmeths on the final partition   Simon Glass
    • [PATCH v2 02/17] boot: Try all bootmeths on the final partition   Tom Rini
      • [PATCH v2 02/17] boot: Try all bootmeths on the final partition   Simon Glass
      • [PATCH v2 02/17] boot: Try all bootmeths on the final partition   Tom Rini
      • [PATCH v2 02/17] boot: Try all bootmeths on the final partition   Simon Glass
      • [PATCH v2 02/17] boot: Try all bootmeths on the final partition   Tom Rini
      • [PATCH v2 02/17] boot: Try all bootmeths on the final partition   Simon Glass
      • [PATCH v2 02/17] boot: Try all bootmeths on the final partition   Tom Rini
      • [PATCH v2 02/17] boot: Try all bootmeths on the final partition   Simon Glass
      • [PATCH v2 02/17] boot: Try all bootmeths on the final partition   Tom Rini
  • [PATCH v2 03/17] boot: Move obtaining the label into a common file   Simon Glass
  • [PATCH v2 04/17] boot: Add more debugging to iter_incr()   Simon Glass
  • [PATCH v2 05/17] boot: Move showing of bootflows out of the command   Simon Glass
    • [PATCH v2 05/17] boot: Move showing of bootflows out of the command   Tom Rini
      • [PATCH v2 05/17] boot: Move showing of bootflows out of the command   Simon Glass
      • [PATCH v2 05/17] boot: Move showing of bootflows out of the command   Tom Rini
      • [PATCH v2 05/17] boot: Move showing of bootflows out of the command   Simon Glass
      • [PATCH v2 05/17] boot: Move showing of bootflows out of the command   Tom Rini
      • [PATCH v2 05/17] boot: Move showing of bootflows out of the command   Simon Glass
      • [PATCH v2 05/17] boot: Move showing of bootflows out of the command   Tom Rini
      • [PATCH v2 05/17] boot: Move showing of bootflows out of the command   Simon Glass
      • [PATCH v2 05/17] boot: Move showing of bootflows out of the command   Tom Rini
  • [PATCH v2 06/17] boot: Add a new test for global bootmeths   Simon Glass
    • [PATCH v2 06/17] boot: Add a new test for global bootmeths   Tom Rini
      • [PATCH v2 06/17] boot: Add a new test for global bootmeths   Simon Glass
      • [PATCH v2 06/17] boot: Add a new test for global bootmeths   Tom Rini
      • [PATCH v2 06/17] boot: Add a new test for global bootmeths   Simon Glass
  • [PATCH v2 07/17] boot: Update first_glob_method when dropping a bootmeth   Simon Glass
  • [PATCH v2 08/17] boot: Add a flag for whether there are global bootmeths   Simon Glass
  • [PATCH v2 09/17] boot: Keep track of which bootmeths have been used   Simon Glass
  • [PATCH v2 10/17] boot: Move preparing bootdev into a function   Simon Glass
  • [PATCH v2 11/17] boot: Support rescanning the global bootmeths   Simon Glass
  • [PATCH v2 12/17] boot: Only run global bootmeths once each   Simon Glass
  • [PATCH v2 13/17] boot: Implement a priority for global bootmeths   Simon Glass
  • [PATCH v2 14/17] boot: Don't change the method count after global bootmeths   Simon Glass
  • [PATCH v2 15/17] boot: Run global bootmeths after all bootdevs are exhausted   Simon Glass
  • [PATCH v2 16/17] boot: Run the EFI bootmgr just before network devices   Simon Glass
    • [PATCH v2 16/17] boot: Run the EFI bootmgr just before network devices   Tom Rini
      • [PATCH v2 16/17] boot: Run the EFI bootmgr just before network devices   Simon Glass
      • [PATCH v2 16/17] boot: Run the EFI bootmgr just before network devices   Tom Rini
  • [PATCH v2 17/17] boot: doc: Update for new global-bootmeth features   Simon Glass
    • [PATCH v2 17/17] boot: doc: Update for new global-bootmeth features   Tom Rini
  • [PATCH v2 00/17] boot: Support priority for global bootmeths   Peter Robinson
    • [PATCH v2 00/17] boot: Support priority for global bootmeths   Simon Glass
• [PATCH 0/2] bootstd: rauc: fix doc and info msg to reflect real flow   Andreas Pretzsch
  • [PATCH 1/2] bootstd: rauc: no valid slot fallback: fix info msg to reflect real flow   Andreas Pretzsch
    • [PATCH 1/2] bootstd: rauc: no valid slot fallback: fix info msg to reflect real flow   Martin Schwan
  • [PATCH 2/2] bootstd: rauc: extend and fix doc to reflect real flow   Andreas Pretzsch
    • [PATCH 2/2] bootstd: rauc: extend and fix doc to reflect real flow   Martin Schwan
  • [PATCH v2 0/2] bootstd: rauc: fix doc and info msg to reflect real flow   Andreas Pretzsch
    • [PATCH v2 0/2] bootstd: rauc: fix doc and info msg to reflect real flow   Tom Rini
  • [PATCH v2 1/2] bootstd: rauc: no valid slot fallback: fix info msg to reflect real flow   Andreas Pretzsch
  • [PATCH v2 2/2] bootstd: rauc: extend and fix doc to reflect real flow   Andreas Pretzsch
    • [PATCH v2 2/2] bootstd: rauc: extend and fix doc to reflect real flow   Martin Schwan
  • [PATCH 0/2] bootstd: rauc: fix doc and info msg to reflect real flow   Simon Glass
    • [PATCH 0/2] bootstd: rauc: fix doc and info msg to reflect real flow - test cases   Andreas Pretzsch
      • [PATCH 0/2] bootstd: rauc: fix doc and info msg to reflect real flow - test cases   Martin Schwan
      • [PATCH 0/2] bootstd: rauc: fix doc and info msg to reflect real flow - test cases   Simon Glass
• [PATCH] doc: samsung: Extend E850-96 documentation to be comprehensive   Sam Protsenko
• [RFC v1 0/4] Add upstream boards Milk-V Mars CM and Mars CM Lite   E Shattow
• [PATCH] xilinx: Replace PHY_VITESSE by PHY_MSCC   Michal Simek
• [PATCH v2 1/2] xilinx: mbv: Remove redundancy in MB-V defconfigs   Michal Simek
  • [PATCH v2 1/2] xilinx: mbv: Remove redundancy in MB-V defconfigs   Michal Simek
• [PATCH v2 2/2] xilinx: Enable SNTP/DATE commands and RTC   Michal Simek
• [PATCH] xilinx: Enable sntp command   Michal Simek
• [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Philip Oberfichtner
  • [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Tom Rini
    • [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Philip Oberfichtner
• [PATCH] fs: jffs2: Remove always true test   Andrew Goodbody
  • [PATCH] fs: jffs2: Remove always true test   Quentin Schulz
  • [PATCH] fs: jffs2: Remove always true test   Tom Rini
• [PATCH v4] env: spi: Fix gd->env_valid for the first write   Michal Simek
  • [PATCH v4] env: spi: Fix gd->env_valid for the first write   Marek Vasut
    • [PATCH v4] env: spi: Fix gd->env_valid for the first write   Michal Simek
    • [PATCH v4] env: spi: Fix gd->env_valid for the first write   E Shattow
• [PATCH] fs: semihosting: Use correct variable for error check   Andrew Goodbody
  • [PATCH] fs: semihosting: Use correct variable for error check   Heinrich Schuchardt
    • [PATCH] fs: semihosting: Use correct variable for error check   Andrew Goodbody
      • [PATCH] fs: semihosting: Use correct variable for error check   Heinrich Schuchardt
      • [PATCH] fs: semihosting: Use correct variable for error check   Andrew Goodbody
    • [PATCH] fs: semihosting: Use correct variable for error check   Sean Anderson
      • [PATCH] fs: semihosting: Use correct variable for error check   Heinrich Schuchardt
      • [PATCH] fs: semihosting: Use correct variable for error check   Sean Anderson
      • [PATCH] fs: semihosting: Use correct variable for error check   Heinrich Schuchardt
      • [PATCH] fs: semihosting: Use correct variable for error check   Sean Anderson
      • [PATCH] fs: semihosting: Use correct variable for error check   Tom Rini
      • [PATCH] fs: semihosting: Use correct variable for error check   Sean Anderson
      • [PATCH] fs: semihosting: Use correct variable for error check   Heinrich Schuchardt
      • [PATCH] fs: semihosting: Use correct variable for error check   Tom Rini
      • [PATCH] fs: semihosting: Use correct variable for error check   Sean Anderson
      • [PATCH] fs: semihosting: Use correct variable for error check   Tom Rini
  • [PATCH] fs: semihosting: Use correct variable for error check   Sean Anderson
    • [PATCH] fs: semihosting: Use correct variable for error check   Tom Rini
  • [PATCH] fs: semihosting: Use correct variable for error check   Tom Rini
• [PATCH] tftp: make TFTP ports unconditionally configurable   Alvin Šipraga
  • [PATCH] tftp: make TFTP ports unconditionally configurable   Quentin Schulz
    • [PATCH] tftp: make TFTP ports unconditionally configurable   Quentin Schulz
• [PATCH] fs/squashfs: Ensure memory is freed by using unwind goto   Andrew Goodbody
  • [PATCH] fs/squashfs: Ensure memory is freed by using unwind goto   Quentin Schulz
  • [PATCH] fs/squashfs: Ensure memory is freed by using unwind goto   Joao Marcos Costa
  • [PATCH] fs/squashfs: Ensure memory is freed by using unwind goto   Tom Rini
• [PATCH tiU25.01 0/2] ANDROID: Add some features link to OPTEE TA AVB   Guillaume La Roque (TI.com)
  • [PATCH tiU25.01 1/2] PENDING: fastboot: Implement Android bootloader locking with CONFIG_FASTBOOT_LOCKING   Guillaume La Roque (TI.com)
  • [PATCH tiU25.01 2/2] PENDING: avb: Add automatic Root of Trust integration for Android KeyMint   Guillaume La Roque (TI.com)
  • [PATCH tiU25.01 0/2] ANDROID: Add some features link to OPTEE TA AVB   Mahaveer, Vishal
  • [PATCH tiU25.01 0/2] ANDROID: Add some features link to OPTEE TA AVB   Maxime Fournier
  • [PATCH tiU25.01 0/2] ANDROID: Add some features link to OPTEE TA AVB   Guillaume La Roque
• [PATCH] board: phytec: phycore_imx8mp: Add rauc to bootmeths   Martin Schwan
  • [PATCH] board: phytec: phycore_imx8mp: Add rauc to bootmeths   Yannic Moog
    • [PATCH] board: phytec: phycore_imx8mp: Add rauc to bootmeths   Martin Schwan
  • [PATCH] board: phytec: phycore_imx8mp: Add rauc to bootmeths   Fabio Estevam
• [PATCH] ubi: extend support for LED activity   yegorslists at googlemail.com
  • [PATCH] ubi: extend support for LED activity   Heiko Schocher
• [PATCH 4/7] doc: make pdfdocs: Ensure SVG files are converted to PDF before the compilation of *.tex files   Adriano Carvalho
  • [PATCH 4/7] doc: make pdfdocs: Ensure SVG files are converted to PDF before the compilation of *.tex files   Tom Rini
• [PATCH 0/3] mach-k3: Rework spl/get_boot_device()   Wadim Egorov
  • [PATCH 1/3] arm: mach-k3: Rework spl/get_boot_device()   Wadim Egorov
    • [PATCH 1/3] arm: mach-k3: Rework spl/get_boot_device()   Anshul Dalal
      • [PATCH 1/3] arm: mach-k3: Rework spl/get_boot_device()   Wadim Egorov
  • [PATCH 2/3] arm: mach-k3: am62ax: Switch to boot-device helper   Wadim Egorov
  • [PATCH 3/3] arm: mach-k3: am64x: Switch to boot-device helper   Wadim Egorov
• [PATCH] ARM: dts: build DTs for MT7987 RFB   Daniel Golle
  • [PATCH] ARM: dts: build DTs for MT7987 RFB   Weijie Gao
• [PATCH v2] fs: semihosting: Fixup smh_flen and smh_read against overflow   Andrew Goodbody
  • [PATCH v2] fs: semihosting: Fixup smh_flen and smh_read against overflow   Sean Anderson
    • [PATCH v2] fs: semihosting: Fixup smh_flen and smh_read against overflow   Andrew Goodbody
    • Re: [PATCH v2] fs: semihosting: Fixup smh_flen and smh_read against overflow   Heinrich Schuchardt
  • [PATCH v2] fs: semihosting: Fixup smh_flen and smh_read against overflow   Heinrich Schuchardt
    • [PATCH v2] fs: semihosting: Fixup smh_flen and smh_read against overflow   Andrew Goodbody
• [PATCH v3] env: spi: Fix gd->env_valid for the first write   Tom Rini
• [MASTER] Pull request doc-202510-rc6   Heinrich Schuchardt
  • [MASTER] Pull request doc-202510-rc6   Tom Rini
• [PATCH v2] doc: samsung: Extend E850-96 documentation to be comprehensive   Sam Protsenko
• [PATCH 2/3] usb: musb-new: Limit check array index before use   Mattijs Korpershoek
• [PATCH RFC 0/6] Introduce the Interconnect Subsystem   Neil Armstrong
  • [PATCH RFC 1/6] Introduce Interconnect Subsystem   Neil Armstrong
  • [PATCH RFC 2/6] MAINTAINERS: add myself as Maintainer of Interconnect   Neil Armstrong
  • [PATCH RFC 3/6] interconnect: add support for the Qualcomm RPMh helpers   Neil Armstrong
    • [PATCH RFC 3/6] interconnect: add support for the Qualcomm RPMh helpers   Neil Armstrong
  • [PATCH RFC 4/6] interconnect: add support for the SM8650 SoC   Neil Armstrong
  • [PATCH RFC 5/6] ufs: qcom: vote for interconnect bandwidth on probe   Neil Armstrong
  • [PATCH RFC 6/6] qcom_defconfig: enable interconnect for SM8650   Neil Armstrong
• [PATCH v3] fs: semihosting: Fixup smh_flen and smh_read against overflow   Andrew Goodbody
  • [PATCH v3] fs: semihosting: Fixup smh_flen and smh_read against overflow   Tom Rini
    • [PATCH v3] fs: semihosting: Fixup smh_flen and smh_read against overflow   Sean Anderson
      • [PATCH v3] fs: semihosting: Fixup smh_flen and smh_read against overflow   Sean Anderson
      • [PATCH v3] fs: semihosting: Fixup smh_flen and smh_read against overflow   Heinrich Schuchardt
      • [PATCH v3] fs: semihosting: Fixup smh_flen and smh_read against overflow   Andrew Goodbody
      • [PATCH v3] fs: semihosting: Fixup smh_flen and smh_read against overflow   Sean Anderson
  • [PATCH v3] fs: semihosting: Fixup smh_flen and smh_read against overflow   Heinrich Schuchardt
• [PATCH v2 0/5] Add initial support for Qualcomm SDM670   David Wronek
  • [PATCH v2 2/5] clk/qcom: sdm845: add support for sdm670   David Wronek
  • [PATCH v2 3/5] pinctrl: qcom: add sdm670 pinctrl driver   David Wronek
    • [PATCH v2 3/5] pinctrl: qcom: add sdm670 pinctrl driver   Casey Connolly
  • [PATCH v2 4/5] qcom_defconfig: enable pinctrl for sdm670   David Wronek
• [PATCH v2 1/5] clk/stub: add sdm670 rpmh clock   David Wronek
• [PATCH v2 5/5] gpio: qcom_spmi: add pm660l   David Wronek
• [PATCH 0/3] fs: ubifs: Address some Smatch issues   Andrew Goodbody
  • [PATCH 1/3] fs: ubifs: Ensure buf is freed before return   Andrew Goodbody
    • [PATCH 1/3] fs: ubifs: Ensure buf is freed before return   Heiko Schocher
  • [PATCH 2/3] fs: ubifs: Need to check return for being an error pointer   Andrew Goodbody
    • [PATCH 2/3] fs: ubifs: Need to check return for being an error pointer   Heiko Schocher
  • [PATCH 3/3] fs: ubifs: Fix and rework error handling in ubifs_finddir   Andrew Goodbody
    • [PATCH 3/3] fs: ubifs: Fix and rework error handling in ubifs_finddir   Heiko Schocher
• [PATCH -next] arm: dts: k3-am654: add vin-supply regulators for DDR   Bryan Brattlof
  • [PATCH -next] arm: dts: k3-am654: add vin-supply regulators for DDR   Nishanth Menon
  • [PATCH -next] arm: dts: k3-am654: add vin-supply regulators for DDR   Tom Rini
• [PATCH] efi_loader: Prevent leak of memory from tmp_files   Andrew Goodbody
  • [PATCH] efi_loader: Prevent leak of memory from tmp_files   Heinrich Schuchardt
    • [PATCH] efi_loader: Prevent leak of memory from tmp_files   Andrew Goodbody
• [PATCH] Revert "fdt: Make sure there is no stale initrd left"   Tom Rini
• [PATCH 00/16] Convert extension support to UCLASS and adds its support to boot flows   Kory Maincent
  • [PATCH 01/16] MAINTAINERS: Add maintainer for extension board support   Kory Maincent
  • [PATCH 02/16] boot: Move extension board support from cmd/ to boot/   Kory Maincent
  • [PATCH 03/16] boot: Add UCLASS support for extension boards   Kory Maincent
  • [PATCH 04/16] board: ti: Exclude cape detection from XPL builds   Kory Maincent
    • [PATCH 04/16] board: ti: Exclude cape detection from XPL builds   Tom Rini
  • [PATCH 05/16] board: ti: Refactor cape detection code for readability   Kory Maincent
  • [PATCH 06/16] board: ti: Convert cape detection to use UCLASS framework   Kory Maincent
    • [PATCH 06/16] board: ti: Convert cape detection to use UCLASS framework   Simon Glass
      • [PATCH 06/16] board: ti: Convert cape detection to use UCLASS framework   Tom Rini
      • [PATCH 06/16] board: ti: Convert cape detection to use UCLASS framework   Simon Glass
      • [PATCH 06/16] board: ti: Convert cape detection to use UCLASS framework   Tom Rini
      • [PATCH 06/16] board: ti: Convert cape detection to use UCLASS framework   Kory Maincent
      • [PATCH 06/16] board: ti: Convert cape detection to use UCLASS framework   Tom Rini
      • [PATCH 06/16] board: ti: Convert cape detection to use UCLASS framework   Kory Maincent
      • [PATCH 06/16] board: ti: Convert cape detection to use UCLASS framework   Tom Rini
      • [PATCH 06/16] board: ti: Convert cape detection to use UCLASS framework   Simon Glass
      • [PATCH 06/16] board: ti: Convert cape detection to use UCLASS framework   Tom Rini
      • [PATCH 06/16] board: ti: Convert cape detection to use UCLASS framework   Kory Maincent
      • [PATCH 06/16] board: ti: Convert cape detection to use UCLASS framework   Simon Glass
      • [PATCH 06/16] board: ti: Convert cape detection to use UCLASS framework   Tom Rini
      • [PATCH 06/16] board: ti: Convert cape detection to use UCLASS framework   Simon Glass
      • [PATCH 06/16] board: ti: Convert cape detection to use UCLASS framework   Thomas Petazzoni
  • [PATCH 07/16] board: sunxi: Refactor CHIP board extension code   Kory Maincent
    • [PATCH 07/16] board: sunxi: Refactor CHIP board extension code   Kory Maincent
  • [PATCH 08/16] board: sunxi: Convert extension support to UCLASS framework   Kory Maincent
  • [PATCH 09/16] board: sandbox: Improve extension board scan implementation   Kory Maincent
  • [PATCH 10/16] board: sandbox: Convert extension support to UCLASS framework   Kory Maincent
  • [PATCH 11/16] board: compulab: Convert imx8mm-cl-iot-gate to UCLASS extension framework   Kory Maincent
  • [PATCH 12/16] boot: Remove legacy extension board support   Kory Maincent
  • [PATCH 13/16] boot: extension: Move overlay apply custom logic to command level   Kory Maincent
  • [PATCH 14/16] boot: pxe_utils: Add extension board devicetree overlay support   Kory Maincent
  • [PATCH 15/16] boot: bootmeth_efi: Refactor distro_efi_try_bootflow_files return logic   Kory Maincent
  • [PATCH 16/16] boot: bootmeth_efi: Add extension board devicetree overlay support   Kory Maincent
  • [PATCH 00/16] Convert extension support to UCLASS and adds its support to boot flows   Tom Rini
    • [PATCH 00/16] Convert extension support to UCLASS and adds its support to boot flows   Kory Maincent
  • [PATCH 00/16] Convert extension support to UCLASS and adds its support to boot flows   Simon Glass
• [PATCH v2] arm: gpio: Add set_flags callback to the Tegra gpio driver   Svyatoslav Ryhel
  • [PATCH v2] arm: gpio: Add set_flags callback to the Tegra gpio driver   Łukasz Majewski
    • [PATCH v2] arm: gpio: Add set_flags callback to the Tegra gpio driver   Svyatoslav Ryhel
• [RFC, PATCH] fdt: Make sure there is no stale initrd left   Richard Weinberger
  • [RFC, PATCH] fdt: Make sure there is no stale initrd left   Tom Rini
    • [RFC, PATCH] fdt: Make sure there is no stale initrd left   Richard Weinberger
      • [RFC, PATCH] fdt: Make sure there is no stale initrd left   Tom Rini
• [PATCH u-boot-test-hooks 1/4] travis-ci: Group the QEMU args   Raymond Mao
  • [PATCH u-boot-test-hooks 2/4] bin: Run the conf without board_ident as default   Raymond Mao
  • [PATCH u-boot-test-hooks 3/4] bin: Add support for testing firmware handoff on qemu_arm64   Raymond Mao
  • [PATCH u-boot-test-hooks 4/4] travis-ci: Introduce env for Firmware Handoff testing   Raymond Mao
  • [PATCH u-boot-test-hooks 1/4] travis-ci: Group the QEMU args   Tom Rini
• [PATCH v2 0/5] Enable Firmware Handoff CI test on qemu_arm64   Raymond Mao
  • [PATCH v2 1/5] docker: add OP-TEE and TF-A build for testing Firmware Handoff   Raymond Mao
    • [PATCH v2 1/5] docker: add OP-TEE and TF-A build for testing Firmware Handoff   Tom Rini
      • [PATCH v2 1/5] docker: add OP-TEE and TF-A build for testing Firmware Handoff   Raymond Mao
  • [PATCH v2 2/5] pytest: add test script to validate Firmware Handoff   Raymond Mao
    • [PATCH v2 2/5] pytest: add test script to validate Firmware Handoff   Tom Rini
  • [PATCH v2 3/5] configs: select CMD_BLOBLIST for Firmware Handoff testing   Raymond Mao
    • [PATCH v2 3/5] configs: select CMD_BLOBLIST for Firmware Handoff testing   Tom Rini
  • [PATCH v2 4/5] ci: check existence of bl1 and fip in the test script   Raymond Mao
  • [PATCH v2 5/5] ci: add test entries for qemu_arm64_tfa_fw_handoff   Raymond Mao
  • [PATCH v2 0/5] Enable Firmware Handoff CI test on qemu_arm64   Tom Rini
    • [PATCH v2 0/5] Enable Firmware Handoff CI test on qemu_arm64   Raymond Mao
      • [PATCH v2 0/5] Enable Firmware Handoff CI test on qemu_arm64   Raymond Mao
      • [PATCH v2 0/5] Enable Firmware Handoff CI test on qemu_arm64   Tom Rini
• [PATCH] SPL: Make SPL_OS depend on supported architectures   Tom Rini
  • [PATCH] SPL: Make SPL_OS depend on supported architectures   Tom Rini
• [PATCH] spl: FIT: Make SPL_LOAD_FIT_FULL depend on SPL_LOAD_FIT   Tom Rini
  • [PATCH] spl: FIT: Make SPL_LOAD_FIT_FULL depend on SPL_LOAD_FIT   Tom Rini
• [PATCH] usb: gadget: spl: Add missing dependency for SPL_USB_GADGET   Tom Rini
  • [PATCH] usb: gadget: spl: Add missing dependency for SPL_USB_GADGET   Mattijs Korpershoek
• [PATCH] power: regulator: Correct dependencies on SPL_REGULATOR_PWM   Tom Rini
• [PATCH] mmc: cv1800b_sdhci: Fix possible warning with MMC_SUPPORTS_TUNING=n   Tom Rini
• [PATCH] phy; qcom: Rework Kconfig logic around MSM8916_USB_PHY   Tom Rini
  • [PATCH] phy; qcom: Rework Kconfig logic around MSM8916_USB_PHY   Casey Connolly
  • [PATCH] phy; qcom: Rework Kconfig logic around MSM8916_USB_PHY   Neil Armstrong
    • [PATCH] phy; qcom: Rework Kconfig logic around MSM8916_USB_PHY   Tom Rini
  • [PATCH] phy; qcom: Rework Kconfig logic around MSM8916_USB_PHY   Casey Connolly
• [PATCH] global: Make REMAKE_ELF depend on !COMPILE_TEST   Tom Rini
  • [PATCH] global: Make REMAKE_ELF depend on !COMPILE_TEST   Tom Rini
• [PATCH] sandbox: Make SANDBOX_xPL depend on !COMPILE_TEST   Tom Rini
  • [PATCH] sandbox: Make SANDBOX_xPL depend on !COMPILE_TEST   Tom Rini
• [PATCH] global: Disable xPL phases when we have enabled COMPILE_TEST   Tom Rini
  • [PATCH] global: Disable xPL phases when we have enabled COMPILE_TEST   Tom Rini
• [PATCH] bootstd: Fix bootflow info for efi_mgr   Sam Protsenko
  • [PATCH] bootstd: Fix bootflow info for efi_mgr   Simon Glass
    • [PATCH] bootstd: Fix bootflow info for efi_mgr   Sam Protsenko
      • [PATCH] bootstd: Fix bootflow info for efi_mgr   Tom Rini
      • [PATCH] bootstd: Fix bootflow info for efi_mgr   Simon Glass
  • [PATCH] bootstd: Fix bootflow info for efi_mgr   Mattijs Korpershoek
  • [PATCH] bootstd: Fix bootflow info for efi_mgr   Tom Rini
• [PATCH] cmd: spl: Remove ATAG support from this command   Tom Rini
• [PATCH -next v1] arm: armv8: remove redundant definition of mmu_status   Tom Rini
• [PATCH] linux/kernel.h: Update upper_NN_bits() and lower_NN_bits() macros   Tom Rini
• [PATCH 0/3] Drop ATAGS for B&R boards   Tom Rini
• [PATCH] net: airoha: simplify rx/free packet logic a bit   Mikhail Kshevetskiy
• [PATCH] global: Add expected space between '#include' and directive   Tom Rini
  • [PATCH] global: Add expected space between '#include' and directive   Tom Rini
• [PATCH] env: fix typo in multiple Kconfig descriptions   Tom Rini
• [PATCH] clk: ti: fix K3 clock driver help texts   Tom Rini
• [PATCH] Fix detection of odd memory configurations on sunxi   Andre Przywara
  • [PATCH] Fix detection of odd memory configurations on sunxi   Jernej Škrabec
    • [PATCH] Fix detection of odd memory configurations on sunxi   Jernej Škrabec
      • [PATCH] Fix detection of odd memory configurations on sunxi   Andre Przywara
    • [PATCH] Fix detection of odd memory configurations on sunxi   Andre Przywara
      • [PATCH] Fix detection of odd memory configurations on sunxi   Andre Przywara
• [PULL] u-boot-usb/next   Marek Vasut
  • [PULL] u-boot-usb/next   Tom Rini
• [PATCH] gpio: qcom: qcom_spmi_gpio: add compatible for pm6150l   Jens Reidel
  • [PATCH] gpio: qcom: qcom_spmi_gpio: add compatible for pm6150l   Neil Armstrong
  • [PATCH] gpio: qcom: qcom_spmi_gpio: add compatible for pm6150l   Casey Connolly
• [PATCH v7 00/24] mtd: spinand: driver improvements   Mikhail Kshevetskiy
• [PATCH v2 0/7] doc: make pdfdocs: Address issues with the make pdfdocs target   Adriano Carvalho
  • [PATCH v2 1/7] doc: make pdfdocs: Specify texlive-xetex as a prerequisite   Adriano Carvalho
    • [PATCH v2 1/7] doc: make pdfdocs: Specify texlive-xetex as a prerequisite   Tom Rini
    • [PATCH v2 1/7] doc: make pdfdocs: Specify texlive-xetex as a prerequisite   Heinrich Schuchardt
      • [PATCH v2 1/7] doc: make pdfdocs: Specify texlive-xetex as a prerequisite   E Shattow
  • [PATCH v2 2/7] doc: make pdfdocs: Update the description with the needed steps   Adriano Carvalho
  • [PATCH v2 3/7] doc: make pdfdocs: Add pip install -r test/py/requirements.txt to the list of needed steps   Adriano Carvalho
    • [PATCH v2 3/7] doc: make pdfdocs: Add pip install -r test/py/requirements.txt to the list of needed steps   Heinrich Schuchardt
      • [PATCH v2 3/7] doc: make pdfdocs: Add pip install -r test/py/requirements.txt to the list of needed steps   Tom Rini
  • [PATCH v2 4/7] doc: make pdfdocs: Ensure SVG files are converted to PDF before the compilation of *.tex files   Adriano Carvalho
    • [PATCH v2 4/7] doc: make pdfdocs: Ensure SVG files are converted to PDF before the compilation of *.tex files   Tom Rini
    • [PATCH v2 4/7] doc: make pdfdocs: Ensure SVG files are converted to PDF before the compilation of *.tex files   Heinrich Schuchardt
  • [PATCH v2 5/7] doc: make pdfdocs: Update kfigure sphinx extension to support inkscape as well   Adriano Carvalho
    • [PATCH v2 5/7] doc: make pdfdocs: Update kfigure sphinx extension to support inkscape as well   Tom Rini
  • [PATCH v2 6/7] doc: make pdfdocs: Increase the maximum list depth   Adriano Carvalho
  • [PATCH v2 7/7] doc: make pdfdocs: Remove redundant "-j" option   Adriano Carvalho
  • [PATCH v2 0/7] doc: make pdfdocs: Address issues with the make pdfdocs target   Tom Rini
    • [PATCH v2 0/7] doc: make pdfdocs: Address issues with the make pdfdocs target   Adriano Carvalho
  • [PATCH v2 0/7] doc: make pdfdocs: Address issues with the make pdfdocs target   Heinrich Schuchardt
  • [PATCH v2 0/7] doc: make pdfdocs: Address issues with the make pdfdocs target   Heinrich Schuchardt
• [U-Boot, v1, 1/1] net: phy: add paged PHY register accessors   Lucien.Jheng
  • [U-Boot, v1, 1/1] net: phy: add paged PHY register accessors   Marek Vasut
    • [U-Boot, v1, 1/1] net: phy: add paged PHY register accessors   Lucien.Jheng
    • [U-Boot, v1, 1/1] net: phy: add paged PHY register accessors   Marek Vasut
      • [U-Boot, v1, 1/1] net: phy: add paged PHY register accessors   Lucien.Jheng
• [PATCH -next v8 00/11] Add support for dynamic MMU configuration   Anshul Dalal
  • [PATCH -next v8 01/11] mach-k3: use minimal memory map for all K3   Anshul Dalal
  • [PATCH -next v8 02/11] mach-k3: use custom enable_cache   Anshul Dalal
  • [PATCH -next v8 03/11] arm: armv8: mmu: export mmu_setup   Anshul Dalal
  • [PATCH -next v8 04/11] arm: armv8: invalidate dcache entries on dcache_enable   Anshul Dalal
  • [PATCH -next v8 05/11] arm: armv8: mmu: add mem_map_fix_dram_banks   Anshul Dalal
    • [PATCH -next v8 05/11] arm: armv8: mmu: add mem_map_fix_dram_banks   Dhruva Gole
  • [PATCH -next v8 06/11] mach-k3: map all banks using mem_map_fix_dram_banks   Anshul Dalal
  • [PATCH -next v8 07/11] arm: armv8: mmu: add mmu_unmap_reserved_mem   Anshul Dalal
  • [PATCH -next v8 08/11] spl: split spl_board_fixups to arch/board specific   Anshul Dalal
    • [PATCH -next v8 08/11] spl: split spl_board_fixups to arch/board specific   Dhruva Gole
  • [PATCH -next v8 09/11] mach-k3: add reserved memory fixups for next boot stage   Anshul Dalal
    • [PATCH -next v8 09/11] mach-k3: add reserved memory fixups for next boot stage   Dhruva Gole
  • [PATCH -next v8 10/11] mach-k3: add carveouts for TFA and optee   Anshul Dalal
    • [PATCH -next v8 10/11] mach-k3: add carveouts for TFA and optee   Dhruva Gole
  • [PATCH -next v8 11/11] arm: mach-k3: reserve space for page table entries   Anshul Dalal
    • [PATCH -next v8 11/11] arm: mach-k3: reserve space for page table entries   Dhruva Gole
    • [PATCH -next v8 11/11] arm: mach-k3: reserve space for page table entries   Bryan Brattlof
      • [PATCH -next v8 11/11] arm: mach-k3: reserve space for page table entries   Anshul Dalal
  • [PATCH -next v8 00/11] Add support for dynamic MMU configuration   Ilias Apalodimas
• [PATCH -next v3 0/7] Add support for secure falcon mode: disable fallback   Anshul Dalal
  • [PATCH -next v3 1/7] spl: Kconfig: add SPL_OS_BOOT_SECURE config symbol   Anshul Dalal
  • [PATCH -next v3 2/7] spl: mmc: split spl_mmc_do_fs_boot into regular/os_boot   Anshul Dalal
  • [PATCH -next v3 3/7] spl: ubi: refactor spl_ubi_load_image for falcon mode   Anshul Dalal
  • [PATCH -next v3 4/7] spl: spi: refactor spl_spi_load_image for falcon mode   Anshul Dalal
  • [PATCH -next v3 5/7] spl: nor: refactor spl_nor_load_image for falcon mode   Anshul Dalal
  • [PATCH -next v3 6/7] spl: nand: refactor spl_nand_load_image for falcon mode   Anshul Dalal
  • [PATCH -next v3 7/7] spl: falcon: disable fallback to U-Boot on failure   Anshul Dalal
  • [PATCH -next v3 0/7] Add support for secure falcon mode: disable fallback   Tom Rini
• [PATCH] board: rockchip: Add support for rk3588 MNT Reform2   Quentin Schulz
• [PATCH v2] board: rockchip: Add support for rk3588 MNT Reform2   Quentin Schulz
• [PATCH] test: Remove not needed null check   Andrew Goodbody
  • [PATCH] test: Remove not needed null check   Tom Rini
• [U-Boot, v2, 1/1]net: phy: add paged PHY register accessors   Lucien.Jheng
• 2 vulnerabilities found in net/nfs.c (integer overflows leading to buffer overflow)   Daniel Cohen
• [PATCH 1/1] efi_loader: correctly check if the HTTP protocol is found   Heinrich Schuchardt
  • [PATCH 1/1] efi_loader: correctly check if the HTTP protocol is found   Simon Glass
  • [PATCH 1/1] efi_loader: correctly check if the HTTP protocol is found   Ilias Apalodimas
• [PATCH RESEND] spi: spi-uclass: Use unwind goto   Andrew Goodbody
  • [PATCH RESEND] spi: spi-uclass: Use unwind goto   Tom Rini
• [PATCH] test: Update logic for video test   Kory Maincent
  • [PATCH] test: Update logic for video test   Kory Maincent
    • [PATCH] test: Update logic for video test   Tom Rini
      • [PATCH] test: Update logic for video test   Kory Maincent
      • [PATCH] test: Update logic for video test   Tom Rini
• [PATCH 0/3] ti_sci: Address some issues found by Smatch   Andrew Goodbody
  • [PATCH 1/3] ti_sci: Prevent memory leak   Andrew Goodbody
    • [PATCH 1/3] ti_sci: Prevent memory leak   Kumar, Udit
  • [PATCH 2/3] ti_sci: Provide error code on error exit   Andrew Goodbody
  • [PATCH 3/3] ti_sci: Pointer is never assigned to   Andrew Goodbody
    • [PATCH 3/3] ti_sci: Pointer is never assigned to   Kumar, Udit
• [PATCH RESEND] ufs: ti-j721e: Correct error detection   Andrew Goodbody
  • [PATCH RESEND] ufs: ti-j721e: Correct error detection   Anshul Dalal
• [PATCH v2] clk: ti: Tighten some TI clock driver dependencies   Tom Rini
• [PATCH v1] arm: dts: k3-am62p-verdin: migrate to OF_UPSTREAM   Ernest Van Hoecke
  • [PATCH v1] arm: dts: k3-am62p-verdin: migrate to OF_UPSTREAM   Tom Rini
• [PATCH] test: Do not build expo and cedit test if no SDL   Kory Maincent
  • [PATCH] test: Do not build expo and cedit test if no SDL   Simon Glass
    • [PATCH] test: Do not build expo and cedit test if no SDL   Tom Rini
      • [PATCH] test: Do not build expo and cedit test if no SDL   Kory Maincent
      • [PATCH] test: Do not build expo and cedit test if no SDL   Tom Rini
      • [PATCH] test: Do not build expo and cedit test if no SDL   Kory Maincent
  • [PATCH] test: Do not build expo and cedit test if no SDL   Tom Rini
• [ANN] U-Boot v2025.10 released   Tom Rini
  • [ANN] U-Boot v2025.10 released   Tom Rini
• [PATCH] i2c: add support for the MT7621 I2C controller   Justin Swartz
  • [PATCH] i2c: add support for the MT7621 I2C controller   Anshul Dalal
• [PATCH v3] doc: samsung: Extend E850-96 documentation to be comprehensive   Sam Protsenko
  • [PATCH v3] doc: samsung: Extend E850-96 documentation to be comprehensive   Sam Protsenko
    • [PATCH v3] doc: samsung: Extend E850-96 documentation to be comprehensive   Sam Protsenko
• RZG2L and DTB blob from TF-A   Biju Das
• [PATCH v1] arm: dts: imx8mp-toradex-smarc: migrate to OF_UPSTREAM   Ernest Van Hoecke
  • [PATCH v1] arm: dts: imx8mp-toradex-smarc: migrate to OF_UPSTREAM   Fabio Estevam
    • [PATCH v1] arm: dts: imx8mp-toradex-smarc: migrate to OF_UPSTREAM   Ernest Van Hoecke
      • [PATCH v1] arm: dts: imx8mp-toradex-smarc: migrate to OF_UPSTREAM   Fabio Estevam
• [PATCH 00/13] Misc changes for Kontron i.MX8MM SoMs and Boards   Frieder Schrempf
  • [PATCH 01/13] imx: kontron-sl-mx8mm: Increase CONFIG_SPL_MAX_SIZE   Frieder Schrempf
  • [PATCH 02/13] imx: kontron-sl-mx8mm: Enable SDP support for loading via USB   Frieder Schrempf
  • [PATCH 03/13] imx: kontron-sl-mx8mm: Remove deprecation warning for old modules   Frieder Schrempf
  • [PATCH 04/13] imx: kontron-sl-mx8mm: Enable fixed regulators   Frieder Schrempf
  • [PATCH 05/13] imx: kontron-sl-mx8mm: Add support for EEPROM on OSM-S module   Frieder Schrempf
  • [PATCH 06/13] imx: kontron-sl-mx8mm: Use eMMC boot part for environment if booting from eMMC   Frieder Schrempf
  • [PATCH 07/13] imx: kontron-sl-mx8mm: Export current env config to devicetree   Frieder Schrempf
  • [PATCH 08/13] imx: kontron-sl-mx8mm: Enable multiple useful commands, drivers and features   Frieder Schrempf
  • [PATCH 09/13] imx: kontron-sl-mx8mm: Enable standard boot and disable legacy distro boot   Frieder Schrempf
  • [PATCH 10/13] imx: kontron-sl-mx8mm: Enable USB hub on BL i.MX8MM OSM-S board   Frieder Schrempf
  • [PATCH 11/13] imx: kontron-sl-mx8mm: Autostart fastboot if booted from USB   Frieder Schrempf
  • [PATCH 12/13] imx: kontron-sl-mx8mm: Force default environment for serial loader boot   Frieder Schrempf
  • [PATCH 13/13] imx: kontron-sl-mx8mm: Convert to OF_UPSTREAM   Frieder Schrempf
  • [PATCH 00/13] Misc changes for Kontron i.MX8MM SoMs and Boards   Fabio Estevam
• [PATCH] gpio: search gpio-line-names property in dm_gpio_lookup_name   Rasmus Villemoes
  • [PATCH] gpio: search gpio-line-names property in dm_gpio_lookup_name   Tom Rini
    • [PATCH] gpio: search gpio-line-names property in dm_gpio_lookup_name   Rasmus Villemoes
• [PATCH 00/10] Enable USB and ENETC on i.MX943 EVK   Fabio Estevam
  • [PATCH 00/10] Enable USB and ENETC on i.MX943 EVK   Marek Vasut
    • [PATCH 00/10] Enable USB and ENETC on i.MX943 EVK   Fabio Estevam
      • [PATCH 00/10] Enable USB and ENETC on i.MX943 EVK   Mattijs Korpershoek
• [PATCH v2] ufs: ti-j721e: Correct error detection   Andrew Goodbody
  • [PATCH v2] ufs: ti-j721e: Correct error detection   Anshul Dalal
  • [PATCH v2] ufs: ti-j721e: Correct error detection   Neil Armstrong
• [PATCH v2 0/3] ti_sci: Address some issues found by Smatch   Andrew Goodbody
  • [PATCH v2 1/3] ti_sci: Prevent memory leak   Andrew Goodbody
    • [PATCH v2 1/3] ti_sci: Prevent memory leak   Kumar, Udit
  • [PATCH v2 2/3] ti_sci: Provide error code on error exit   Andrew Goodbody
    • [PATCH v2 2/3] ti_sci: Provide error code on error exit   Kumar, Udit
    • [PATCH v2 2/3] ti_sci: Provide error code on error exit   Kumar, Udit
  • [PATCH v2 3/3] ti_sci: Pointer is never assigned to   Andrew Goodbody
    • [PATCH v2 3/3] ti_sci: Pointer is never assigned to   Kumar, Udit
• [PATCH v2] mmc: sdhci-cadence6: Use dev_read_u32() for device tree property parsing   Tanmay Kathpalia
• [PATCH] arm: meson: add support for EFI capsule updates   Ferass El Hafidi
  • [PATCH] arm: meson: add support for EFI capsule updates   Evgeny Bachinin
    • [PATCH] arm: meson: add support for EFI capsule updates   Ferass El Hafidi
  • [PATCH] arm: meson: add support for EFI capsule updates   Ferass El Hafidi
• [PATCH] mmc: sdhci-cadence6: Fix DT property value endianness   Tanmay Kathpalia
• [PATCH v3 0/4] Add support for secure falcon mode: load kernel image before args   Tom Rini
• [PATCH v3] bootstd: make it possible to use tftp for netboot with standardboot   Tom Rini
  • [PATCH v3] bootstd: make it possible to use tftp for netboot with standardboot   Jerome Forissier
    • [PATCH v3] bootstd: make it possible to use tftp for netboot with standardboot   Tom Rini
• [PATCH v3] airoha: rework RAM size handling to support multiple RAM size   Tom Rini
• [PATCH] misc: fs_loader: Use buffer pointer in request_firmware_into_buf_via_script()   Tom Rini
• [PATCH v2] board: ti: am335x: Do not call disabled PMIC functions   Tom Rini
• [PATCH] mkimage: Add help text for bundling TFA BL31 in mkimage -f auto   Tom Rini
• [PATCH v2] cmd/dma: implement dmareset command   Tom Rini
  • [PATCH v2] cmd/dma: implement dmareset command   Sune Brian
  • [PATCH v2] cmd/dma: implement dmareset command   Sune Brian
    • [PATCH v2] cmd/dma: implement dmareset command   Tom Rini
• [PATCH] arm: stm32mp25: add ethernet support for stm32mp255 series   Asadeds
  • [PATCH] arm: stm32mp25: add ethernet support for stm32mp255 series   Patrice CHOTARD
  • [PATCH] arm: stm32mp25: add ethernet support for stm32mp255 series   Patrice CHOTARD
    • [PATCH] arm: stm32mp25: add ethernet support for stm32mp255 series   Asadeds
    • [PATCH] arm: stm32mp25: add ethernet support for stm32mp255 series   Patrice CHOTARD
• [PATCH] test: boot: Add test for bootmeth_rauc   Martin Schwan
  • [PATCH] test: boot: Add test for bootmeth_rauc   Tom Rini
    • [PATCH] test: boot: Add test for bootmeth_rauc   Simon Glass
    • [PATCH] test: boot: Add test for bootmeth_rauc   Martin Schwan
• [PATCH 0/2] fix an7581 panic caused by attempt to support multiple RAM size   Mikhail Kshevetskiy
  • [PATCH 2/2] arm/airoha: partly revert support of multiple RAM size for an7581   Mikhail Kshevetskiy
  • [PATCH 0/2] fix an7581 panic caused by attempt to support multiple RAM size   Tom Rini
• [PATCH 1/2] arm/airoha: an7581 ignores CFG_MAX_MEM_MAPPED value   Mikhail Kshevetskiy
• [PATCH] ARM: dts: sam9x60ek: select PIT as tick-timer   Eugen Hristev
  • [PATCH] ARM: dts: sam9x60ek: select PIT as tick-timer   Dharma Balasubiramani
  • [PATCH] ARM: dts: sam9x60ek: select PIT as tick-timer   Tom Rini
• [PATCH v2 0/2] net: airoha: improvements   Mikhail Kshevetskiy
  • [PATCH v2 1/2] net: airoha: simplify rx/free packet logic a bit   Mikhail Kshevetskiy
  • [PATCH v2 2/2] net: airoha: increase the number of rx network buffers   Mikhail Kshevetskiy
  • [PATCH v2 0/2] net: airoha: improvements   Mikhail Kshevetskiy
    • [PATCH v2 1/2] net: airoha: simplify rx/free packet logic a bit   Mikhail Kshevetskiy
    • [PATCH v2 2/2] net: airoha: increase the number of rx network buffers   Mikhail Kshevetskiy
• [PATCH] imx93_frdm: Fix USB vendor ID   Mathieu Dubois-Briand
  • [PATCH] imx93_frdm: Fix USB vendor ID   Fabio Estevam
• [PATCH v3 0/3] ti_sci: Address some issues found by Smatch   Andrew Goodbody
  • [PATCH v3 1/3] ti_sci: Prevent memory leak   Andrew Goodbody
  • [PATCH v3 2/3] ti_sci: Provide error code on error exit   Andrew Goodbody
  • [PATCH v3 3/3] ti_sci: Pointer is never assigned to valid value   Andrew Goodbody
  • [PATCH v3 0/3] ti_sci: Address some issues found by Smatch   Anshul Dalal
  • [PATCH v3 0/3] ti_sci: Address some issues found by Smatch   Nishanth Menon
  • [PATCH v3 0/3] ti_sci: Address some issues found by Smatch   Tom Rini
• [PATCH RFC v3 0/8] initial U-Boot SPL support on Amlogic GX SoCs   Ferass El Hafidi
  • [PATCH RFC v3 1/8] tools: mkimage: Add Amlogic Boot Image type   Ferass El Hafidi
  • [PATCH RFC v3 2/8] mmc: meson_gx_mmc: add minimal non-DM driver   Ferass El Hafidi
    • [PATCH RFC v3 2/8] mmc: meson_gx_mmc: add minimal non-DM driver   Neil Armstrong
      • [PATCH RFC v3 2/8] mmc: meson_gx_mmc: add minimal non-DM driver   Ferass El Hafidi
    • [PATCH RFC v3 2/8] mmc: meson_gx_mmc: add minimal non-DM driver   Yao Zi
      • [PATCH RFC v3 2/8] mmc: meson_gx_mmc: add minimal non-DM driver   Ferass El Hafidi
  • [PATCH RFC v3 3/8] serial: serial_meson: add minimal non-DM driver   Ferass El Hafidi
    • [PATCH RFC v3 3/8] serial: serial_meson: add minimal non-DM driver   Neil Armstrong
  • [PATCH RFC v3 4/8] arm: meson: initial u-boot SPL support for GX SoCs   Ferass El Hafidi
    • [PATCH RFC v3 4/8] arm: meson: initial u-boot SPL support for GX SoCs   Neil Armstrong
  • [PATCH RFC v3 5/8] arm: meson: spl: add support for SPL DRAM init   Ferass El Hafidi
  • [PATCH RFC v3 6/8] arm: dts: meson-gx-u-boot: add binman configuration for U-Boot SPL   Ferass El Hafidi
  • [PATCH RFC v3 7/8] board: amlogic: add kconfig fragments for SPL   Ferass El Hafidi
  • [PATCH RFC v3 8/8] doc: board: amlogic: add u-boot-spl documentation   Ferass El Hafidi
• [PATCH RFC 0/9] initial U-Boot SPL support on Amlogic GX SoCs   Ferass El Hafidi
• [PATCH v2] i2c: add support for the MT7621 I2C controller   Heiko Schocher
  • [PATCH v2] i2c: add support for the MT7621 I2C controller   Justin Swartz
• [PATCH v2] cmd: ti: Add DDRSS Inline ECC Error Injection command   Neha Malcom Francis
  • [PATCH v2] cmd: ti: Add DDRSS Inline ECC Error Injection command   Kumar, Udit
  • [PATCH v2] cmd: ti: Add DDRSS Inline ECC Error Injection command   Tom Rini
• [PATCH v1 0/2] Add support for secure falcon mode: disable args file   Anshul Dalal
  • [PATCH v1 1/2] spl: make args file optional in falcon mode   Anshul Dalal
    • [PATCH v1 1/2] spl: make args file optional in falcon mode   Tom Rini
  • [PATCH v1 2/2] spl: prevent loading args file in secure falcon mode   Anshul Dalal
    • [PATCH v1 2/2] spl: prevent loading args file in secure falcon mode   Tom Rini
• [PATCH v3] i2c: add support for the MT7621 I2C controller   Justin Swartz
  • [PATCH v3] i2c: add support for the MT7621 I2C controller   Heiko Schocher
    • [PATCH v3] i2c: add support for the MT7621 I2C controller   Heiko Schocher
• [PATCH v3 2/2] clk: scmi: add compatibility for clock version 3.0 and onwards   Kamlesh Gurudasani
  • [PATCH v3 2/2] clk: scmi: add compatibility for clock version 3.0 and onwards   Maxim Kochetkov
    • [PATCH v3 2/2] clk: scmi: add compatibility for clock version 3.0 and onwards   Kamlesh Gurudasani
      • [PATCH v3 2/2] clk: scmi: add compatibility for clock version 3.0 and onwards   Kamlesh Gurudasani
• [PATCH v7 2/2] efi_loader: Improve disk image detection in efi_bootmgr   Ilias Apalodimas
• [PATCH v2] net: dwc_eth_ops: Correct check for FDT_64BIT   Tom Rini
  • [PATCH v2] net: dwc_eth_ops: Correct check for FDT_64BIT   Jerome Forissier
• [resend PATCH v4] disk: dos: Add all options for EFI System Partitions   Peter Robinson
  • [resend PATCH v4] disk: dos: Add all options for EFI System Partitions   Tom Rini
  • [resend PATCH v4] disk: dos: Add all options for EFI System Partitions   Heinrich Schuchardt
    • [resend PATCH v4] disk: dos: Add all options for EFI System Partitions   Heinrich Schuchardt
• [PATCH v2 0/7] Introduce the Interconnect Subsystem   Neil Armstrong
  • [PATCH v2 1/7] Introduce the Interconnect Subsystem   Neil Armstrong
    • [PATCH v2 1/7] Introduce the Interconnect Subsystem   Simon Glass
      • [PATCH v2 1/7] Introduce the Interconnect Subsystem   Neil Armstrong
      • [PATCH v2 1/7] Introduce the Interconnect Subsystem   Simon Glass
      • [PATCH v2 1/7] Introduce the Interconnect Subsystem   Neil Armstrong
      • [PATCH v2 1/7] Introduce the Interconnect Subsystem   Simon Glass
      • [PATCH v2 1/7] Introduce the Interconnect Subsystem   Neil Armstrong
      • [PATCH v2 1/7] Introduce the Interconnect Subsystem   Neil Armstrong
      • [PATCH v2 1/7] Introduce the Interconnect Subsystem   Simon Glass
      • [PATCH v2 1/7] Introduce the Interconnect Subsystem   Neil Armstrong
  • [PATCH v2 2/7] interconnect: add DM test suite   Neil Armstrong
  • [PATCH v2 3/7] MAINTAINERS: add myself as Maintainer of Interconnect   Neil Armstrong
  • [PATCH v2 4/7] interconnect: add support for the Qualcomm RPMh helpers   Neil Armstrong
  • [PATCH v2 5/7] interconnect: add support for the SM8650 SoC   Neil Armstrong
  • [PATCH v2 6/7] ufs: qcom: vote for interconnect bandwidth on probe   Neil Armstrong
  • [PATCH v2 7/7] qcom_defconfig: enable interconnect for SM8650   Neil Armstrong
• [PATCH v2 1/1] virtio: blk: support block sizes exceeding 512 bytes   Andre Przywara
  • [PATCH v2 1/1] virtio: blk: support block sizes exceeding 512 bytes   Heinrich Schuchardt
    • [PATCH v2 1/1] virtio: blk: support block sizes exceeding 512 bytes   Andre Przywara
• [PATCH v1] cmd/dma: documentation   Brian Sune
  • [PATCH v1] cmd/dma: documentation   Tom Rini
    • [PATCH v1] cmd/dma: documentation   Sune Brian
      • [PATCH v1] cmd/dma: documentation   Tom Rini
      • [PATCH v1] cmd/dma: documentation   Sune Brian
      • [PATCH v1] cmd/dma: documentation   Tom Rini
      • [PATCH v1] cmd/dma: documentation   Sune Brian
      • [PATCH v1] cmd/dma: documentation   Tom Rini
      • [PATCH v1] cmd/dma: documentation   Sune Brian
• [PATCH v2] cmd/dma: documentation   Brian Sune
  • [PATCH v2] cmd/dma: documentation   Tom Rini
    • [PATCH v2] cmd/dma: documentation   Sune Brian
      • [PATCH v2] cmd/dma: documentation   Sune Brian
• [PATCH] pci: Remove pcie_intel_fpga driver   Tom Rini
• [PATCH] gpio: aspeed: Make U_BOOT_DRIVER entries unique   Tom Rini
• [PATCH] rtc: Make U_BOOT_DRIVER entries unique   Tom Rini
• [PATCH] spmi: sandbox: Make U_BOOT_DRIVER entries unique   Tom Rini
• [PATCH] thermal: Make U_BOOT_DRIVER entries unique   Tom Rini
• [PATCH 1/2] thermal: rcar_gen3: Add Renesas R-Car Gen3/Gen4 and RZ/G2 thermal driver   Tom Rini
• [PATCH] thermal: Convert .get_temp() return value to millicelsius   Tom Rini
• Merge of v6.17-dts tag to dts/upstream   Tom Rini
• [PATCH] mtd: ubi: Remove test that always fails   Heiko Schocher
• [RESEND PATCH] drivers/mtd/ubispl/ubispl.c: limit copy size   Heiko Schocher
• Please pull u-boot-ubi   Heiko Schocher
  • Please pull u-boot-ubi   Tom Rini
    • Please pull u-boot-ubi   Heiko Schocher
• [PATCH] .mailmap: update e-mail address for Abbarapu Venkatesh Yadav   Abbarapu Venkatesh Yadav
  • [PATCH] .mailmap: update e-mail address for Abbarapu Venkatesh Yadav   Tom Rini
• [PATCH] tpm: Make U_BOOT_DRIVER entries unique   Ilias Apalodimas
• [PATCH v2] test: boot: Add test for bootmeth_rauc   Martin Schwan
  • [PATCH v2] test: boot: Add test for bootmeth_rauc   Tom Rini
    • [PATCH v2] test: boot: Add test for bootmeth_rauc   Martin Schwan
      • [PATCH v2] test: boot: Add test for bootmeth_rauc   Tom Rini
• [PATCH] net: bootp: Prevent buffer overflow to avoid leaking the RAM content   Philippe Reynes
  • [PATCH] net: bootp: Prevent buffer overflow to avoid leaking the RAM content   Fabio Estevam
    • [PATCH] net: bootp: Prevent buffer overflow to avoid leaking the RAM content   Philippe Reynes
• [PATCH v4 0/4] boot: Precursor series for global bootmeths   Simon Glass
  • [PATCH v4 1/4] boot: Improve comments related to global bootmeths   Simon Glass
    • [PATCH v4 1/4] boot: Improve comments related to global bootmeths   Mattijs Korpershoek
    • [PATCH v4 1/4] boot: Improve comments related to global bootmeths   Sam Protsenko
  • [PATCH v4 2/4] boot: Move obtaining the label into a common file   Simon Glass
    • [PATCH v4 2/4] boot: Move obtaining the label into a common file   Mattijs Korpershoek
    • [PATCH v4 2/4] boot: Move obtaining the label into a common file   Tom Rini
      • [PATCH v4 2/4] boot: Move obtaining the label into a common file   Simon Glass
      • [PATCH v4 2/4] boot: Move obtaining the label into a common file   Mattijs Korpershoek
      • [PATCH v4 2/4] boot: Move obtaining the label into a common file   Tom Rini
      • [PATCH v4 2/4] boot: Move obtaining the label into a common file   Simon Glass
      • [PATCH v4 2/4] boot: Move obtaining the label into a common file   Tom Rini
  • [PATCH v4 3/4] boot: Add more debugging to iter_incr()   Simon Glass
    • [PATCH v4 3/4] boot: Add more debugging to iter_incr()   Tom Rini
      • [PATCH v4 3/4] boot: Add more debugging to iter_incr()   Simon Glass
      • [PATCH v4 3/4] boot: Add more debugging to iter_incr()   Tom Rini
      • [PATCH v4 3/4] boot: Add more debugging to iter_incr()   Simon Glass
      • [PATCH v4 3/4] boot: Add more debugging to iter_incr()   Tom Rini
      • [PATCH v4 3/4] boot: Add more debugging to iter_incr()   Simon Glass
      • [PATCH v4 3/4] boot: Add more debugging to iter_incr()   Tom Rini
  • [PATCH v4 4/4] boot: Move preparing bootdev into a function   Simon Glass
    • [PATCH v4 4/4] boot: Move preparing bootdev into a function   Tom Rini
      • [PATCH v4 4/4] boot: Move preparing bootdev into a function   Simon Glass
      • [PATCH v4 4/4] boot: Move preparing bootdev into a function   Tom Rini
      • [PATCH v4 4/4] boot: Move preparing bootdev into a function   Simon Glass
      • [PATCH v4 4/4] boot: Move preparing bootdev into a function   Tom Rini
• [PATCH] nand: atmel: Rework ATMEL_EBI and DM_NAND_ATMEL interaction   Eugen Hristev
  • [PATCH] nand: atmel: Rework ATMEL_EBI and DM_NAND_ATMEL interaction   Tom Rini
    • [PATCH] nand: atmel: Rework ATMEL_EBI and DM_NAND_ATMEL interaction   Eugen Hristev
      • [PATCH] nand: atmel: Rework ATMEL_EBI and DM_NAND_ATMEL interaction   Tom Rini
      • [PATCH] nand: atmel: Rework ATMEL_EBI and DM_NAND_ATMEL interaction   Michael Nazzareno Trimarchi
• 回复: [EXT] Re: [PATCH 5/6] usb: dwc3: gadget: Add delay after software writes DCTL in dwc3_gadget_run_stop()   Alice Guo
  • 回复: [EXT] Re: [PATCH 5/6] usb: dwc3: gadget: Add delay after software writes DCTL in dwc3_gadget_run_stop()   Alice Guo
  • 回复: [EXT] Re: [PATCH 5/6] usb: dwc3: gadget: Add delay after software writes DCTL in dwc3_gadget_run_stop()   Alice Guo
  • 回复: [EXT] Re: [PATCH 5/6] usb: dwc3: gadget: Add delay after software writes DCTL in dwc3_gadget_run_stop()   Alice Guo
• [PATCH] doc: sandbox: fix typos   Lukas Zirpel
  • [PATCH] doc: sandbox: fix typos   Quentin Schulz
• [PATCH v4 01/10] riscv: Add initial support for P8700 SoC   Yao Zi
• 回复: [PATCH 5/6] usb: dwc3: gadget: Add delay after software writes DCTL in dwc3_gadget_run_stop()   Alice Guo (OSS)
  • 回复: [PATCH 5/6] usb: dwc3: gadget: Add delay after software writes DCTL in dwc3_gadget_run_stop()   Mattijs Korpershoek
• [PATCH v2] spi: cadence-qspi: Remove cdns,is-dma property handling   Michal Simek
  • [PATCH v2] spi: cadence-qspi: Remove cdns,is-dma property handling   E Shattow
    • [PATCH v2] spi: cadence-qspi: Remove cdns,is-dma property handling   Ronald Wahl
      • [PATCH v2] spi: cadence-qspi: Remove cdns,is-dma property handling   Michal Simek
      • [PATCH v2] spi: cadence-qspi: Remove cdns,is-dma property handling   Ronald Wahl
      • [PATCH v2] spi: cadence-qspi: Remove cdns,is-dma property handling   Michal Simek
      • [PATCH v2] spi: cadence-qspi: Remove cdns,is-dma property handling   Ronald Wahl
      • [PATCH v2] spi: cadence-qspi: Remove cdns,is-dma property handling   Markus Elfring
• [PATCH v4 02/10] board: boston-riscv: Add initial support for P8700 Boston board   Yao Zi
• [PATCH v4 05/10] riscv: Add support for MIPS GIC syscon on RISC-V SoCs   Yao Zi
• [PATCH v4 09/10] riscv: boston: Add support for LED character display command   Yao Zi
• [PATCH v4 10/10] cmd: riscv: Add 'startharts' command to start multiple harts   Yao Zi
• [PATCH v2 0/3] Add support for secure falcon mode: disable args file   Anshul Dalal
  • [PATCH v2 1/3] spl: make args file optional in falcon mode   Anshul Dalal
  • [PATCH v2 2/3] spl: prevent loading args file in secure falcon mode   Anshul Dalal
  • [PATCH v2 3/3] spl: set fdt address as spl_image arg in falcon mode   Anshul Dalal
  • [PATCH] spl: Restore args file being default in falcon mode   Tom Rini
    • [PATCH] spl: Restore args file being default in falcon mode   Tom Rini
  • [PATCH v2 0/3] Add support for secure falcon mode: disable args file   Tom Rini
• [PATCH] net: make dhcp_run() common for NET and NET_LWIP   Jerome Forissier
  • [PATCH] net: make dhcp_run() common for NET and NET_LWIP   Benjamin Hahn
  • [PATCH] net: make dhcp_run() common for NET and NET_LWIP   Heinrich Schuchardt
    • [PATCH] net: make dhcp_run() common for NET and NET_LWIP   Tom Rini
• [PATCH v1] env: Kconfig: disable external env in secure os boot   Anshul Dalal
  • [PATCH v1] env: Kconfig: disable external env in secure os boot   Tom Rini
  • [PATCH v1] env: Kconfig: disable external env in secure os boot   Tom Rini
    • [PATCH v1] env: Kconfig: disable external env in secure os boot   Anshul Dalal
      • [PATCH v1] env: Kconfig: disable external env in secure os boot   Tom Rini
• [PATCH v1 0/2] led: fixes   Patrice Chotard
  • [PATCH v1 1/2] led: Update led_get_by_label()   Patrice Chotard
  • [PATCH v1 2/2] led: Add LED dependency for LED_ACTIVITY and LED_BOOT   Patrice Chotard
    • [PATCH v1 2/2] led: Add LED dependency for LED_ACTIVITY and LED_BOOT   Yegor Yefremov
  • [PATCH v1 0/2] led: fixes   Tom Rini
• [PATCH v8 0/2] Improve disk image detection in efi_bootmgr   Javier Tia
  • [PATCH v8 1/2] part: Export part_driver_lookup_type for external use   Javier Tia
    • [PATCH v8 1/2] part: Export part_driver_lookup_type for external use   Ilias Apalodimas
  • [PATCH v8 2/2] efi_loader: Improve disk image detection in efi_bootmgr   Javier Tia
    • [PATCH v8 2/2] efi_loader: Improve disk image detection in efi_bootmgr   Ilias Apalodimas
• [PATCH v1 00/11] stm32mp1: Update led management for stm32mp1 boards   Patrice Chotard
• [PATCH v1 01/11] board: st: Drop old LED code from stm32f429-discovery   Patrice Chotard
• [PATCH v1 02/11] board: st: Update LED management for stm32mp1   Patrice Chotard
• [PATCH v1 03/11] ARM: dts: Update config node for stm32mp135f-dk-u-boot   Patrice Chotard
• [PATCH v1 04/11] ARM: dts: Update config node for stm32mp157a-dk1-u-boot   Patrice Chotard
• [PATCH v1 05/11] ARM: dts: Update config node for stm32mp137a-dk1-scmi-u-boot   Patrice Chotard
• [PATCH v1 06/11] ARM: dts: Update config node for stm32mp157c-ed1-u-boot   Patrice Chotard
• [PATCH v1 07/11] ARM: dts: Update config node for stm32mp157c-ed1-scmi-u-boot   Patrice Chotard
• [PATCH v1 08/11] configs: stm32mp13: Enable LED_BOOT for stm32mp13_defconfig   Patrice Chotard
• [PATCH v1 09/11] configs: stm32mp15: Enable LED_BOOT for stm32mp15_defconfig   Patrice Chotard
• [PATCH v1 10/11] configs: stm32mp15: Enable LED_BOOT for stm32mp15_basic_defconfig   Patrice Chotard
• [PATCH v1 11/11] configs: stm32mp15: Enable LED_BOOT for stm32mp15_trusted_defconfig   Patrice Chotard
• [RFC PATCH v4 0/1] Add initial support for AM62D2-EVM   Tom Rini
• [PATCH 1/2] test: led: Add missing ';'   Tom Rini
• [PATCH] Kconfig: Make further use of testing for !COMPILE_TEST   Tom Rini
• [PATCH] spl: Correct dependency for SPL_SYS_REPORT_STACK_F_USAGE   Tom Rini
• [PATCH] sandbox: Add more dummy cache functions   Tom Rini
• [PATCH] cmd: Make CMD_MP depend on the CPU framework being disabled   Tom Rini
• [PATCH] cmd: Update dependencies on CMD_IRQ   Tom Rini
• [PATCH] arm: baltos: remove obsolete GPMC_NAND_ECC_LP_x8_LAYOUT macro   Tom Rini
• [PATCH] common: Make MMU_PGPROT depend on !SANDBOX   Tom Rini
• [PATCH] led: Mark LED_STATUS as depending on LED being disabled   Tom Rini
• [PATCH] misc: ti: k3: Tighten K3_FUSE dependencies   Tom Rini
• [PATCH] rng: Tighten some rng driver dependencies   Tom Rini
• [PATCH] timer: Tighten CADENCE_TTC_TIMER dependencies   Tom Rini
• [PATCH] w1-eeprom: Make use of static keyword in drivers   Tom Rini
• [PATCH] scripts/checkpatch.pl: Resync with v6.17   Tom Rini
• [u-boot-test-hooks][PATCH] labgrid-trini: Quick update for labgrid v25.0.x and later   Tom Rini
  • [u-boot-test-hooks][PATCH] labgrid-trini: Quick update for labgrid v25.0.x and later   Tom Rini
• [PATCH v2 00/18] Convert extension support to UCLASS and adds its support to boot flows   Kory Maincent (TI.com)
  • [PATCH v2 01/18] MAINTAINERS: Add maintainer for extension board support   Kory Maincent (TI.com)
    • [PATCH v2 01/18] MAINTAINERS: Add maintainer for extension board support   Simon Glass
    • [PATCH v2 01/18] MAINTAINERS: Add maintainer for extension board support   Mattijs Korpershoek
  • [PATCH v2 02/18] boot: Move extension board support from cmd/ to boot/   Kory Maincent (TI.com)
    • [PATCH v2 02/18] boot: Move extension board support from cmd/ to boot/   Simon Glass
      • [PATCH v2 02/18] boot: Move extension board support from cmd/ to boot/   Kory Maincent
  • [PATCH v2 03/18] boot: Add UCLASS support for extension boards   Kory Maincent (TI.com)
    • [PATCH v2 03/18] boot: Add UCLASS support for extension boards   Simon Glass
      • [PATCH v2 03/18] boot: Add UCLASS support for extension boards   Kory Maincent
      • [PATCH v2 03/18] boot: Add UCLASS support for extension boards   Simon Glass
      • [PATCH v2 03/18] boot: Add UCLASS support for extension boards   Kory Maincent
      • [PATCH v2 03/18] boot: Add UCLASS support for extension boards   Simon Glass
  • [PATCH v2 04/18] board: ti: Exclude cape detection from XPL builds   Kory Maincent (TI.com)
  • [PATCH v2 05/18] board: ti: Refactor cape detection code for readability   Kory Maincent (TI.com)
  • [PATCH v2 06/18] board: ti: Convert cape detection to use UCLASS framework   Kory Maincent (TI.com)
  • [PATCH v2 07/18] board: sunxi: Exclude DIP detection from XPL builds   Kory Maincent (TI.com)
  • [PATCH v2 08/18] board: sunxi: Refactor CHIP board extension code   Kory Maincent (TI.com)
  • [PATCH v2 09/18] board: sunxi: Convert extension support to UCLASS framework   Kory Maincent (TI.com)
  • [PATCH v2 10/18] board: sandbox: Improve extension board scan implementation   Kory Maincent (TI.com)
    • [PATCH v2 10/18] board: sandbox: Improve extension board scan implementation   Simon Glass
  • [PATCH v2 11/18] board: sandbox: Convert extension support to UCLASS framework   Kory Maincent (TI.com)
    • [PATCH v2 11/18] board: sandbox: Convert extension support to UCLASS framework   Simon Glass
  • [PATCH v2 12/18] board: compulab: Exclude compulab extension board detection from XPL builds   Kory Maincent (TI.com)
  • [PATCH v2 13/18] board: compulab: Convert imx8mm-cl-iot-gate to UCLASS extension framework   Kory Maincent (TI.com)
  • [PATCH v2 14/18] boot: Remove legacy extension board support   Kory Maincent (TI.com)
    • [PATCH v2 14/18] boot: Remove legacy extension board support   Simon Glass
  • [PATCH v2 15/18] boot: extension: Move overlay apply custom logic to command level   Kory Maincent (TI.com)
    • [PATCH v2 15/18] boot: extension: Move overlay apply custom logic to command level   Simon Glass
  • [PATCH v2 16/18] boot: pxe_utils: Add extension board devicetree overlay support   Kory Maincent (TI.com)
    • [PATCH v2 16/18] boot: pxe_utils: Add extension board devicetree overlay support   Kory Maincent
    • [PATCH v2 16/18] boot: pxe_utils: Add extension board devicetree overlay support   Simon Glass
  • [PATCH v2 17/18] boot: bootmeth_efi: Refactor distro_efi_try_bootflow_files return logic   Kory Maincent (TI.com)
    • [PATCH v2 17/18] boot: bootmeth_efi: Refactor distro_efi_try_bootflow_files return logic   Simon Glass
  • [PATCH v2 18/18] boot: bootmeth_efi: Add extension board devicetree overlay support   Kory Maincent (TI.com)
    • [PATCH v2 18/18] boot: bootmeth_efi: Add extension board devicetree overlay support   Simon Glass
• [PATCH v1 0/3] stm32mp13: Add ADC support and USB power delivery check   Patrice Chotard
  • [PATCH v1 1/3] adc: stm32mp13: add support of adc to stm32mp13   Patrice Chotard
  • [PATCH v1 2/3] configs: stm32: Enable ADC support for stm32mp13_defconfig   Patrice Chotard
  • [PATCH v1 3/3] ARM: dts: Add st, adc_usb_pd property for stm32mp135-dk-u-boot   Patrice Chotard
• [PATCH v2] net: bootp: Prevent buffer overflow to avoid leaking the RAM content   Philippe Reynes
• [PATCH 2/2] ufs: Add bRefClkFreq attribute setting   Kumar, Udit
  • [PATCH 2/2] ufs: Add bRefClkFreq attribute setting   Francis, Neha
  • [PATCH 2/2] ufs: Add bRefClkFreq attribute setting   Jared McArthur
• [PATCH 1/2] ufs: Add support for sending UFS attribute requests   Kumar, Udit
  • [PATCH 1/2] ufs: Add support for sending UFS attribute requests   Francis, Neha
• [PATCH v2] arm: dts: imx8mp-toradex-smarc: migrate to OF_UPSTREAM   Ernest Van Hoecke
  • [PATCH v2] arm: dts: imx8mp-toradex-smarc: migrate to OF_UPSTREAM   Fabio Estevam
• [PATCH 1/1] virito: blk: fix logic to determine block sizes   Heinrich Schuchardt
  • [PATCH 1/1] virito: blk: fix logic to determine block sizes   Tom Rini
• [PATCH] sunxi: a133: Add NSI arbiter support to DRAM init   Paul Kocialkowski
  • [PATCH] sunxi: a133: Add NSI arbiter support to DRAM init   Andre Przywara
    • [PATCH] sunxi: a133: Add NSI arbiter support to DRAM init   Paul Kocialkowski
• [GIT PULL] Please pull u-boot-imx-master-20251009   Fabio Estevam
  • [GIT PULL] Please pull u-boot-imx-master-20251009   Tom Rini
• [PATCH 07/10] firmware: scmi: mailbox: Support arm,max_rx_timeout_ms   Tom Rini
  • [PATCH 07/10] firmware: scmi: mailbox: Support arm,max_rx_timeout_ms   Peng Fan
    • [PATCH 07/10] firmware: scmi: mailbox: Support arm,max_rx_timeout_ms   Tom Rini
• [PATCH 1/2] fw_loader: Split from fs_loader into separate library file   Tom Rini
• [PATCH 00/10] firmware: scmi: various update   Tom Rini
• [u-boot-test-hooks][PATCH] labgrid-trini: Fix logic in sd-mux flash wrapper   Tom Rini
  • [u-boot-test-hooks][PATCH] labgrid-trini: Fix logic in sd-mux flash wrapper   Tom Rini
• [PATCH] ufs: Fix wrong bitfield usage for Data Direction in Transfer Request   Kunihiko Hayashi
  • [PATCH] ufs: Fix wrong bitfield usage for Data Direction in Transfer Request   Neil Armstrong
  • [PATCH] ufs: Fix wrong bitfield usage for Data Direction in Transfer Request   Neil Armstrong
• [PATCH] qcom_defconfig: Enable meminfo command with mapping   Abbarapu Venkatesh Yadav
  • [PATCH] qcom_defconfig: Enable meminfo command with mapping   Casey Connolly
  • [PATCH] qcom_defconfig: Enable meminfo command with mapping   Casey Connolly
• [PATCH] bootstd: Allow PXE boot to be disabled   Tony Dinh
  • [PATCH] bootstd: Allow PXE boot to be disabled   Simon Glass
  • [PATCH] bootstd: Allow PXE boot to be disabled   Tom Rini
    • [PATCH] bootstd: Allow PXE boot to be disabled   Tony Dinh
      • [PATCH] bootstd: Allow PXE boot to be disabled   Tom Rini
      • [PATCH] bootstd: Allow PXE boot to be disabled   Tony Dinh
      • [PATCH] bootstd: Allow PXE boot to be disabled   Tom Rini
    • [PATCH] bootstd: Allow PXE boot to be disabled   Peter Robinson
      • [PATCH] bootstd: Allow PXE boot to be disabled   Tom Rini
      • [PATCH] bootstd: Allow PXE boot to be disabled   Tony Dinh
      • [PATCH] bootstd: Allow PXE boot to be disabled   Simon Glass
      • [PATCH] bootstd: Allow PXE boot to be disabled   Tony Dinh
      • [PATCH] bootstd: Allow PXE boot to be disabled   Simon Glass
      • [PATCH] bootstd: Allow PXE boot to be disabled   Tom Rini
      • [PATCH] bootstd: Allow PXE boot to be disabled   Tony Dinh
      • [PATCH] bootstd: Allow PXE boot to be disabled   Tony Dinh
      • [PATCH] bootstd: Allow PXE boot to be disabled   Tony Dinh
• Pull request for uboot-nand-05102025   Michael Nazzareno Trimarchi
  • Pull request for uboot-nand-05102025   Tom Rini
• [GIT PULL] please pull mmc-power-master-2025-10-10   Peng Fan
  • [GIT PULL] please pull mmc-power-master-2025-10-10   Tom Rini
• [GIT PULL] please pull fsl-qoriq-master-2025-10-10   Peng Fan
  • [GIT PULL] please pull fsl-qoriq-master-2025-10-10   Tom Rini
• [PATCH v9 00/11] Add support for dynamic MMU configuration   Anshul Dalal
  • [PATCH v9 01/11] mach-k3: use minimal memory map for all K3   Anshul Dalal
  • [PATCH v9 02/11] mach-k3: use custom enable_cache   Anshul Dalal
  • [PATCH v9 03/11] arm: armv8: mmu: export mmu_setup   Anshul Dalal
  • [PATCH v9 04/11] arm: armv8: invalidate dcache entries on dcache_enable   Anshul Dalal
  • [PATCH v9 05/11] arm: armv8: mmu: add mem_map_fix_dram_banks   Anshul Dalal
    • [PATCH v9 05/11] arm: armv8: mmu: add mem_map_fix_dram_banks   Ilias Apalodimas
      • [PATCH v9 05/11] arm: armv8: mmu: add mem_map_fix_dram_banks   Anshul Dalal
  • [PATCH v9 06/11] mach-k3: map all banks using mem_map_fix_dram_banks   Anshul Dalal
  • [PATCH v9 07/11] arm: armv8: mmu: add mmu_unmap_reserved_mem   Anshul Dalal
    • [PATCH v9 07/11] arm: armv8: mmu: add mmu_unmap_reserved_mem   Ilias Apalodimas
      • [PATCH v9 07/11] arm: armv8: mmu: add mmu_unmap_reserved_mem   Anshul Dalal
  • [PATCH v9 08/11] spl: split spl_board_fixups to arch/board specific   Anshul Dalal
  • [PATCH v9 09/11] mach-k3: add reserved memory fixups for next boot stage   Anshul Dalal
  • [PATCH v9 10/11] mach-k3: add carveouts for TFA and optee   Anshul Dalal
  • [PATCH v9 11/11] arm: mach-k3: reserve space for page table entries   Anshul Dalal
• [PATCH] efi_loader: Use ESRT_FW_TYPE_SYSTEMFIRMWARE instead of ESRT_FW_TYPE_UNKNOWN   Ilias Apalodimas
  • [PATCH] efi_loader: Use ESRT_FW_TYPE_SYSTEMFIRMWARE instead of ESRT_FW_TYPE_UNKNOWN   Heinrich Schuchardt
• [PATCH RESEND v7 00/24] mtd: spinand: driver improvements   Mikhail Kshevetskiy
  • [PATCH RESEND v7 01/24] spi: spi-mem: Extend SPI MEM ops to match Linux 6.16   Mikhail Kshevetskiy
  • [PATCH RESEND v7 02/24] mtd: spinand: Use the spi-mem dirmap API   Mikhail Kshevetskiy
  • [PATCH RESEND v7 03/24] mtd: nand: Add a NAND page I/O request type   Mikhail Kshevetskiy
  • [PATCH RESEND v7 04/24] mtd: spinand: core: add missing MODULE_DEVICE_TABLE()   Mikhail Kshevetskiy
  • [PATCH RESEND v7 05/24] mtd: spinand: Extend spinand_wait() to match Linux kernel implementation   Mikhail Kshevetskiy
  • [PATCH RESEND v7 06/24] mtd: spinand: Make use of spinand_to_[mtd/nand]() helpers   Mikhail Kshevetskiy
  • [PATCH RESEND v7 07/24] mtd: spinand: Align logic for enabling ECC to match Linux kernel   Mikhail Kshevetskiy
  • [PATCH RESEND v7 08/24] mtd: spinand: Refactor spinand_init* functions   Mikhail Kshevetskiy
  • [PATCH RESEND v7 09/24] mtd: spinand: Refactor ECC/OOB functions   Mikhail Kshevetskiy
  • [PATCH RESEND v7 10/24] mtd: spinand: Sync core code and device support with Linux 6.10   Mikhail Kshevetskiy
  • [PATCH RESEND v7 11/24] mtd: spinand: set bitflip_threshold to 75% of ECC strength   Mikhail Kshevetskiy
  • [PATCH RESEND v7 12/24] mtd: spinand: Add support for setting plane select bits   Mikhail Kshevetskiy
  • [PATCH RESEND v7 13/24] mtd: spinand: Remove write_enable_op() in markbad()   Mikhail Kshevetskiy
  • [PATCH RESEND v7 14/24] mtd: spinand: Introduce a way to avoid raw access   Mikhail Kshevetskiy
  • [PATCH RESEND v7 15/24] mtd: spinand: add support of continuous reading mode   Mikhail Kshevetskiy
  • [PATCH RESEND v7 16/24] mtd: spinand: Add read retry support   Mikhail Kshevetskiy
  • [PATCH RESEND v7 17/24] mtd: spinand: add OTP support   Mikhail Kshevetskiy
  • [PATCH RESEND v7 18/24] mtd: spinand: Enhance the logic when picking a variant   Mikhail Kshevetskiy
  • [PATCH RESEND v7 19/24] mtd: spinand: propagate spinand_wait() errors from spinand_write_page()   Mikhail Kshevetskiy
  • [PATCH RESEND v7 20/24] mtd: spinand: Add a ->configure_chip() hook   Mikhail Kshevetskiy
  • [PATCH RESEND v7 21/24] mtd: spinand: Sync core code and device support with Linux 6.17-rc1   Mikhail Kshevetskiy
  • [PATCH RESEND v7 22/24] mtd: spinand: fix direct mapping creation sizes   Mikhail Kshevetskiy
  • [PATCH RESEND v7 23/24] mtd: spinand: try a regular dirmap if creating a dirmap for continuous reading fails   Mikhail Kshevetskiy
  • [PATCH RESEND v7 24/24] mtd: spinand: repeat reading in regular mode if continuous reading fails   Mikhail Kshevetskiy
• [PATCH v3 0/5] cmd: mtd: improvements   Mikhail Kshevetskiy
  • [PATCH v3 1/5] cmd: mtd: add markbad command support   Mikhail Kshevetskiy
  • [PATCH v3 2/5] cmd: mtd: add nand_write_test command support   Mikhail Kshevetskiy
  • [PATCH v3 3/5] cmd: mtd: add nand_read_test command support   Mikhail Kshevetskiy
  • [PATCH v3 4/5] cmd: mtd: fix speed measurement in the speed benchmark   Mikhail Kshevetskiy
    • [PATCH v3 4/5] cmd: mtd: fix speed measurement in the speed benchmark   Heinrich Schuchardt
      • [PATCH v4 0/5] cmd: mtd: improvements   Mikhail Kshevetskiy
      • [PATCH v4 1/5] cmd: mtd: add markbad command support   Mikhail Kshevetskiy
      • [PATCH v4 2/5] cmd: mtd: add nand_write_test command support   Mikhail Kshevetskiy
      • [PATCH v4 3/5] cmd: mtd: add nand_read_test command support   Mikhail Kshevetskiy
      • [PATCH v4 4/5] cmd: mtd: fix speed measurement in the speed benchmark   Mikhail Kshevetskiy
      • [PATCH v4 5/5] cmd: mtd: add benchmark option to the help   Mikhail Kshevetskiy
  • [PATCH v3 5/5] cmd: mtd: add benchmark option to the help   Mikhail Kshevetskiy
• [PATCH v1 0/5] Allow falcon boot from A-core SPL on K3 devices   Anshul Dalal
  • [PATCH v1 1/5] spl: Kconfig: allow falcon mode for TI secure devices   Anshul Dalal
  • [PATCH v1 2/5] board: ti: common: Kconfig: add CMD_SPL   Anshul Dalal
    • [PATCH v1 2/5] board: ti: common: Kconfig: add CMD_SPL   Tom Rini
      • [PATCH v1 2/5] board: ti: common: Kconfig: add CMD_SPL   Anshul Dalal
  • [PATCH v1 3/5] arm: mach-k3: enable support for falcon mode   Anshul Dalal
    • [PATCH v1 3/5] arm: mach-k3: enable support for falcon mode   Tom Rini
      • [PATCH v1 3/5] arm: mach-k3: enable support for falcon mode   Anshul Dalal
      • [PATCH v1 3/5] arm: mach-k3: enable support for falcon mode   Anshul Dalal
      • [PATCH v1 3/5] arm: mach-k3: enable support for falcon mode   Tom Rini
  • [PATCH v1 4/5] doc: develop: add docs for secure falcon mode   Anshul Dalal
  • [PATCH v1 5/5] doc: develop: falcon: document unsetting CMD_BOOTx   Anshul Dalal
• [PATCH] test/py: Update to a newer pytest release   Tom Rini
  • [PATCH RFH DO NOT APPLY] test/py: Update to pytest 8.0.2   Tom Rini
    • [PATCH RFH DO NOT APPLY] test/py: Update to pytest 8.0.2   Heinrich Schuchardt
      • [PATCH RFH DO NOT APPLY] test/py: Update to pytest 8.0.2   Tom Rini
      • [PATCH RFH DO NOT APPLY] test/py: Update to pytest 8.0.2   Heinrich Schuchardt
  • [PATCH v2] test/py: Update to a newer pytest release   Tom Rini
    • [PATCH v2] test/py: Update to a newer pytest release   Tom Rini
• [PATCH v10 00/11] Add support for dynamic MMU configuration   Anshul Dalal
  • [PATCH v10 01/11] mach-k3: use minimal memory map for all K3   Anshul Dalal
  • [PATCH v10 02/11] mach-k3: use custom enable_cache   Anshul Dalal
  • [PATCH v10 03/11] arm: armv8: mmu: export mmu_setup   Anshul Dalal
  • [PATCH v10 04/11] arm: armv8: invalidate dcache entries on dcache_enable   Anshul Dalal
  • [PATCH v10 05/11] arm: armv8: mmu: add mem_map_from_dram_banks   Anshul Dalal
    • [PATCH v10 05/11] arm: armv8: mmu: add mem_map_from_dram_banks   Ilias Apalodimas
      • [PATCH v10 05/11] arm: armv8: mmu: add mem_map_from_dram_banks   Anshul Dalal
      • [PATCH v10 05/11] arm: armv8: mmu: add mem_map_from_dram_banks   Ilias Apalodimas
  • [PATCH v10 06/11] mach-k3: map all banks using mem_map_from_dram_banks   Anshul Dalal
  • [PATCH v10 07/11] arm: armv8: mmu: add mmu_unmap_reserved_mem   Anshul Dalal
    • [PATCH v10 07/11] arm: armv8: mmu: add mmu_unmap_reserved_mem   Ilias Apalodimas
      • [PATCH v10 07/11] arm: armv8: mmu: add mmu_unmap_reserved_mem   Anshul Dalal
  • [PATCH v10 08/11] spl: split spl_board_fixups to arch/board specific   Anshul Dalal
  • [PATCH v10 09/11] mach-k3: add reserved memory fixups for next boot stage   Anshul Dalal
  • [PATCH v10 10/11] mach-k3: add carveouts for TFA and optee   Anshul Dalal
  • [PATCH v10 11/11] arm: mach-k3: reserve space for page table entries   Anshul Dalal
• [PATCH v3 1/5] Image size checks: Move all configs in one place   Philip Oberfichtner
• [PATCH v3 0/7] Implement the Generic System Interconnect Subsystem for U-Boot   Neil Armstrong
  • [PATCH v3 1/7] Introduce the Generic System Interconnect Subsystem   Neil Armstrong
  • [PATCH v3 2/7] interconnect: add DM test suite   Neil Armstrong
  • [PATCH v3 3/7] MAINTAINERS: add myself as Maintainer of the Generic System Interconnect Subsystem   Neil Armstrong
  • [PATCH v3 4/7] interconnect: add support for the Qualcomm RPMh helpers   Neil Armstrong
  • [PATCH v3 5/7] interconnect: add support for the SM8650 SoC   Neil Armstrong
  • [PATCH v3 6/7] ufs: qcom: vote for interconnect bandwidth on probe   Neil Armstrong
  • [PATCH v3 7/7] qcom_defconfig: enable interconnect for SM8650   Neil Armstrong
  • [PATCH v3 0/7] Implement the Generic System Interconnect Subsystem for U-Boot   Neil Armstrong
    • [PATCH v3 0/7] Implement the Generic System Interconnect Subsystem for U-Boot   Tom Rini
• [PATCH v3 0/6] Enable Firmware Handoff CI test on qemu_arm64   Raymond Mao
  • [PATCH v3 1/6] docker: add OP-TEE and TF-A build for testing Firmware Handoff   Raymond Mao
    • [PATCH v3 1/6] docker: add OP-TEE and TF-A build for testing Firmware Handoff   Jerome Forissier
      • [PATCH v3 1/6] docker: add OP-TEE and TF-A build for testing Firmware Handoff   Raymond Mao
      • [PATCH v3 1/6] docker: add OP-TEE and TF-A build for testing Firmware Handoff   Jerome Forissier
  • [PATCH v3 2/6] pytest: add test script to validate Firmware Handoff   Raymond Mao
    • [PATCH v3 2/6] pytest: add test script to validate Firmware Handoff   Tom Rini
  • [PATCH v3 3/6] configs: select CMD_BLOBLIST for Firmware Handoff testing   Raymond Mao
  • [PATCH v3 4/6] ci: check existence of bl1 and fip in the test script   Raymond Mao
  • [PATCH v3 5/6] ci: rename conf.qemu_arm64_na to conf.qemu_arm64   Raymond Mao
  • [PATCH v3 6/6] ci: add test entries for qemu_arm64_tfa_fw_handoff   Raymond Mao
• [PATCH 0/4] Improve RaspBerry Pi 5 support part1: Fixes   Torsten Duwe
  • [PATCH 1/4] macb: wrap asm/arch/clk.h with ifndef CLK   Torsten Duwe
    • [PATCH 1/4] macb: wrap asm/arch/clk.h with ifndef CLK   Matthias Brugger
  • [PATCH 2/4] pci-uclass: respect ofnode_read_pci_vendev retval   Torsten Duwe
  • [PATCH 3/4] Fix #cells lookup in of_get_dma_range   Torsten Duwe
  • [PATCH 4/4] pcie_brcmstb: use bus_base for PCI config devices   Torsten Duwe
  • [PATCH 0/4] Improve RaspBerry Pi 5 support part1: Fixes   Matthias Brugger
    • [PATCH 0/4] Improve RaspBerry Pi 5 support part1: Fixes   Peter Robinson
  • [PATCH 0/4] Improve RaspBerry Pi 5 support part1: Fixes   Oleksii Moisieiev
  • [PATCH 0/4] Improve RaspBerry Pi 5 support part1: Fixes   Oleksii Moisieiev
  • [PATCH 0/4] Improve RaspBerry Pi 5 support part1: Fixes   Jens Maus
• [PATCH] cmd: mtd: benchmark: use lldiv() instead of 64-bit division   Mikhail Kshevetskiy
  • [PATCH] cmd: mtd: benchmark: use lldiv() instead of 64-bit division   Heinrich Schuchardt
    • [PATCH] cmd: mtd: benchmark: use lldiv() instead of 64-bit division   Michael Nazzareno Trimarchi
      • [PATCH] cmd: mtd: benchmark: use lldiv() instead of 64-bit division   Mikhail Kshevetskiy
• [PATCH] net: phy: Make driver overloading get_phy_id depend on !COMPILE_TEST   Tom Rini
• [PATCH 00/11] spi: airoha: driver improvements   Mikhail Kshevetskiy
  • [PATCH 02/11] spi: airoha: add support of dual/quad wires spi modes to exec_op() handler   Mikhail Kshevetskiy
  • [PATCH 03/11] spi: airoha: add dma support   Mikhail Kshevetskiy
  • [PATCH 04/11] spi: airoha: support of dualio/quadio flash reading commands   Mikhail Kshevetskiy
  • [PATCH 05/11] spi: airoha: avoid setting of page/oob sizes in REG_SPI_NFI_PAGEFMT   Mikhail Kshevetskiy
  • [PATCH 06/11] spi: airoha: reduce the number of modification of REG_SPI_NFI_CNFG and REG_SPI_NFI_SECCUS_SIZE registers   Mikhail Kshevetskiy
  • [PATCH 07/11] spi: airoha: set custom sector size equal to flash page size   Mikhail Kshevetskiy
  • [PATCH 08/11] spi: airoha: avoid usage of flash specific parameters   Mikhail Kshevetskiy
  • [PATCH 09/11] spi: airoha: buffer must be 0xff-ed before writing   Mikhail Kshevetskiy
  • [PATCH 10/11] spi: airoha: return an error for continuous mode dirmap creation cases   Mikhail Kshevetskiy
  • [PATCH 11/11] spi: airoha: en7523: workaround flash damaging if UART_TXD was short to GND   Mikhail Kshevetskiy
• [PATCH 01/11] spi: airoha: remove unnecessary operation adjust_op_size   Mikhail Kshevetskiy
• [PATCH] configs: j7200_evm_a72_defconfig: Enable DP83867 Ethernet PHY   Tom Rini
• [PATCH] include: completion.h: Convert the rest of the dummy functions to macros   Tom Rini
• [PATCH 0/2] am65-cpsw-nuss phy_interface_t fixup for fixed TX delay   Tom Rini
• [PATCH] doc: environment: fix links to Linux kernel documentation   Mattia Narducci
  • [PATCH] doc: environment: fix links to Linux kernel documentation   Quentin Schulz
• [PATCH v2 0/2] ufs: Add support for setting bRefClkFreq attribute   Jared McArthur
  • [PATCH v2 2/2] ufs: Add bRefClkFreq attribute setting   Jared McArthur
  • [PATCH v2 0/2] ufs: Add support for setting bRefClkFreq attribute   Neil Armstrong
• [PATCH v2 1/2] ufs: Add support for sending UFS attribute requests   Jared McArthur
• [PATCH 1/1] test: uninstall PK after secboot tests   Heinrich Schuchardt
  • [PATCH 1/1] test: uninstall PK after secboot tests   Tom Rini
  • [PATCH 1/1] test: uninstall PK after secboot tests   Tom Rini
• [PATCH v2 00/10] Enable USB and ENETC on i.MX943 EVK   Alice Guo
  • [PATCH v2 01/10] usb: ehci-mx6: Extend support to i.MX91, i.MX93, i.MX94, and i.MX95   Alice Guo
  • [PATCH v2 02/10] arm: arch-imx9: Add USB2.0 and USB3.0 base address definitions   Alice Guo
  • [PATCH v2 00/10] Enable USB and ENETC on i.MX943 EVK   Alice Guo
    • [PATCH v2 01/10] usb: ehci-mx6: Extend support to i.MX91, i.MX93, i.MX94, and i.MX95   Alice Guo
    • [PATCH v2 02/10] arm: arch-imx9: Add USB2.0 and USB3.0 base address definitions   Alice Guo
    • [PATCH v2 03/10] imx943_evk: Enable USB 2.0 controller host mode   Alice Guo
    • [PATCH v2 04/10] Add serial# for SPL SDP download   alice.guo at nxp.com
    • [PATCH v2 05/10] usb: f_sdp: Update SDP driver to support PQC container   alice.guo at nxp.com
  • [PATCH v2 00/10] Enable USB and ENETC on i.MX943 EVK   alice.guo at oss.nxp.com
    • [PATCH v2 01/10] usb: ehci-mx6: Extend support to i.MX91, i.MX93, i.MX94, and i.MX95   alice.guo at oss.nxp.com
    • [PATCH v2 02/10] arm: arch-imx9: Add USB2.0 and USB3.0 base address definitions   alice.guo at oss.nxp.com
    • [PATCH v2 03/10] imx943_evk: Enable USB 2.0 controller host mode   alice.guo at oss.nxp.com
    • [PATCH v2 04/10] Add serial# for SPL SDP download   alice.guo at oss.nxp.com
    • [PATCH v2 05/10] usb: f_sdp: Update SDP driver to support PQC container   alice.guo at oss.nxp.com
    • [PATCH v2 06/10] phy: imx8mq-usb: Add SPL support for i.MX8MQ, i.MX8MP, i.MX95, and i.MX94 USB3.0 PHY   alice.guo at oss.nxp.com
    • [PATCH v2 07/10] imx943_evk: Add support for booting from USB SDP on USB3.0   alice.guo at oss.nxp.com
    • [PATCH v2 08/10] net: fsl_enetc: Add i.MX94 support to NETC block control driver   alice.guo at oss.nxp.com
    • [PATCH v2 09/10] net: fsl_enetc_mdio: Add support for phy-supply property   alice.guo at oss.nxp.com
    • [PATCH v2 10/10] imx943_evk: Enable ENETC1 and ENETC2   alice.guo at oss.nxp.com
• [PATCH 1/2] ufs: core: Add ufshcd_dme_enable() and ufshcd_dme_reset()   Shawn Lin
  • [PATCH 2/2] ufs: rockchip: Add initial support   Shawn Lin
• [PATCH 08/10] net: fsl_enetc: Add i.MX94 support to NETC block control driver   Ye Li
• [PATCH 0/3] mkimage: fit: various fixes in fit_{import,extract}_data   Tom Rini
• (subset) [PATCH 1/2] arm: v7m: Allow SYS_ARCH_TIMER here   Tom Rini
• [PATCH 2/2] timer: Mark this as incompatible with SYS_ARCH_TIMER   Tom Rini
  • [PATCH 2/2] timer: Mark this as incompatible with SYS_ARCH_TIMER   Marius Dinu
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
  • Fwd: New Defects reported by Coverity Scan for Das U-Boot   Mikhail Kshevetskiy
    • Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH v2] arm: meson: add support for EFI capsule updates   Ferass El Hafidi
  • [PATCH v2] arm: meson: add support for EFI capsule updates   Neil Armstrong
  • [PATCH v2] arm: meson: add support for EFI capsule updates   Evgeny Bachinin
• [PATCH 0/4] ufs: Add support for MediaTek hosts   Igor Belwon
  • [PATCH 1/4] phy: Add MediaTek UFS PHY Driver   Igor Belwon
  • [PATCH 2/4] ufs: unipro: Add PA_SCRAMBLING property   Igor Belwon
  • [PATCH 3/4] ufs: Add MediaTek UFS driver   Igor Belwon
    • [PATCH 3/4] ufs: Add MediaTek UFS driver   Neil Armstrong
  • [PATCH 4/4] MAINTAINERS: Add UFS to MediaTek section   Igor Belwon
    • [PATCH 4/4] MAINTAINERS: Add UFS to MediaTek section   Neil Armstrong
  • (subset) [PATCH 0/4] ufs: Add support for MediaTek hosts   Neil Armstrong
• [PATCH v5 0/4] boot: Precursor series for global bootmeths   Simon Glass
  • [PATCH v5 1/4] boot: Improve comments related to global bootmeths   Simon Glass
    • [PATCH v5 1/4] boot: Improve comments related to global bootmeths   Tom Rini
  • [PATCH v5 2/4] boot: Move obtaining the label into a common file   Simon Glass
    • [PATCH v5 2/4] boot: Move obtaining the label into a common file   Heinrich Schuchardt
      • [PATCH v5 2/4] boot: Move obtaining the label into a common file   Simon Glass
    • [PATCH v5 2/4] boot: Move obtaining the label into a common file   Tom Rini
      • [PATCH v5 2/4] boot: Move obtaining the label into a common file   Simon Glass
      • [PATCH v5 2/4] boot: Move obtaining the label into a common file   Tom Rini
  • [PATCH v5 3/4] boot: Rename usb to ums   Simon Glass
    • [PATCH v5 3/4] boot: Rename usb to ums   Heinrich Schuchardt
      • [PATCH v5 3/4] boot: Rename usb to ums   Simon Glass
  • [PATCH v5 4/4] boot: Move preparing bootdev into a function   Simon Glass
    • [PATCH v5 4/4] boot: Move preparing bootdev into a function   Tom Rini
  • (subset) [PATCH v5 0/4] boot: Precursor series for global bootmeths   Tom Rini
• [PATCH v2] cmd: mtd: benchmark: use lldiv() instead of 64-bit division   Mikhail Kshevetskiy
• [PATCH] cmd: sf: align erase and write on erase block boundary   Marek Vasut
  • [PATCH] cmd: sf: align erase and write on erase block boundary   Tom Rini
• [PATCH] gpio: dwapb: Enable SPL support for DWAPB GPIO driver   Tom Rini
  • [PATCH] gpio: dwapb: Enable SPL support for DWAPB GPIO driver   Tanmay Kathpalia
  • [PATCH] gpio: dwapb: Enable SPL support for DWAPB GPIO driver   Tanmay Kathpalia
• [PATCH] Revert "riscv: Add a Zalrsc-only alternative for synchronization in start.S"   E Shattow
  • [SPAM Warning!]Re: [PATCH] Revert "riscv: Add a Zalrsc-only alternative for synchronization in start.S"   Yao Zi
• [PATCH] timer: sifive_clint: Add GHRTv2 compaible string   Jimmy Ho
• [PATCH v2] timer: sifive_clint: Add GHRTv2 compaible string   Jimmy Ho
• [PATCH 00/11] remoteproc: Add support for i.MX8M[M/N/P/Q] and i.MX93   Peng Fan (OSS)
  • [PATCH 01/11] lib: Import iomem_copy from Linux Kernel   Peng Fan (OSS)
    • [PATCH 01/11] lib: Import iomem_copy from Linux Kernel   Kumar, Udit
      • [PATCH 01/11] lib: Import iomem_copy from Linux Kernel   Peng Fan
      • [PATCH 01/11] lib: Import iomem_copy from Linux Kernel   Kumar, Udit
  • [PATCH 02/11] remoteproc: Extend device_to_virt with a is_iomem parameter   Peng Fan (OSS)
  • [PATCH 03/11] remoteproc: Add imx_rproc driver to support NXP i.MX8MP/N   Peng Fan (OSS)
  • [PATCH 04/11] remoteproc: imx_rproc: Support i.MX8MQ/M   Peng Fan (OSS)
  • [PATCH 05/11] remoteproc: imx_rproc: Add support for i.MX93 CM33   Peng Fan (OSS)
  • [PATCH 06/11] arm: dts: imx8m: Add remoteproc node   Peng Fan (OSS)
    • [PATCH 06/11] arm: dts: imx8m: Add remoteproc node   Tom Rini
      • [PATCH 06/11] arm: dts: imx8m: Add remoteproc node   Peng Fan
      • [PATCH 06/11] arm: dts: imx8m: Add remoteproc node   Tom Rini
  • [PATCH 07/11] imx8mp: Enable remoteproc for i.MX8MP EVK   Peng Fan (OSS)
  • [PATCH 08/11] imx8mm: Enable remoteproc for i.MX8MM EVK   Peng Fan (OSS)
  • [PATCH 09/11] imx8mn: Enable remoteproc for i.MX8MN EVK   Peng Fan (OSS)
  • [PATCH 10/11] imx8mq: Enable remoteproc for i.MX8MQ EVK   Peng Fan (OSS)
  • [PATCH 11/11] imx93: Enable remoteproc for i.MX93-EVK/QSB/FRDM   Peng Fan (OSS)
  • [PATCH 00/11] remoteproc: Add support for i.MX8M[M/N/P/Q] and i.MX93   Kumar, Udit
  • [PATCH 00/11] remoteproc: Add support for i.MX8M[M/N/P/Q] and i.MX93   Kumar, Udit
    • [PATCH 00/11] remoteproc: Add support for i.MX8M[M/N/P/Q] and i.MX93   Peng Fan
• [PATCH 0/3] Add i.MX95 15x15 EVK support   Ye Li
  • [PATCH 1/3] imx95_evk: Share the env file for both 19x19 EVK and 15x15 EVK   Ye Li
  • [PATCH 2/3] arm: dts: imx95-15x15-evk: Add -u-boot.dtsi for SPL and binman   Ye Li
  • [PATCH 3/3] imx95_evk: Add basic support for iMX95 15x15 EVK   Ye Li
  • [PATCH 0/3] Add i.MX95 15x15 EVK support   Peng Fan
  • [PATCH 0/3] Add i.MX95 15x15 EVK support   Fabio Estevam
• [PATCH v3 00/10] Enable USB and ENETC on i.MX943 EVK   alice.guo at oss.nxp.com
  • [PATCH v3 01/10] usb: ehci-mx6: Extend support to i.MX91, i.MX93, i.MX94, and i.MX95   alice.guo at oss.nxp.com
  • [PATCH v3 02/10] arm: arch-imx9: Add USB2.0 and USB3.0 base address definitions   alice.guo at oss.nxp.com
  • [PATCH v3 03/10] imx943_evk: Enable USB 2.0 controller host mode   alice.guo at oss.nxp.com
  • [PATCH v3 04/10] Add serial# for SPL SDP download   alice.guo at oss.nxp.com
  • [PATCH v3 05/10] usb: f_sdp: Update SDP driver to support PQC container   alice.guo at oss.nxp.com
  • [PATCH v3 06/10] phy: imx8mq-usb: Add SPL support for i.MX8MQ, i.MX8MP, i.MX95, and i.MX94 USB3.0 PHY   alice.guo at oss.nxp.com
  • [PATCH v3 07/10] imx943_evk: Add support for booting from USB SDP on USB3.0   alice.guo at oss.nxp.com
  • [PATCH v3 08/10] net: fsl_enetc: Add i.MX94 support to NETC block control driver   alice.guo at oss.nxp.com
  • [PATCH v3 09/10] net: fsl_enetc_mdio: Add support for phy-supply property   alice.guo at oss.nxp.com
  • [PATCH v3 10/10] imx943_evk: Enable ENETC1 and ENETC2   alice.guo at oss.nxp.com
  • [PATCH v3 00/10] Enable USB and ENETC on i.MX943 EVK   Fabio Estevam
  • [PATCH v3 00/10] Enable USB and ENETC on i.MX943 EVK   Fabio Estevam
    • [PATCH v3 00/10] Enable USB and ENETC on i.MX943 EVK   Tom Rini
      • 回复: [PATCH v3 00/10] Enable USB and ENETC on i.MX943 EVK   Alice Guo (OSS)
• [PATCH v2] ARM: dts: sam9x60ek: select PIT as tick-timer   Dharma Balasubiramani
  • [PATCH v2] ARM: dts: sam9x60ek: select PIT as tick-timer   Eugen Hristev
• [PATCH v1] board: toradex: fix aquila imx95 0098 pid4   Francesco Dolcini
  • [PATCH v1] board: toradex: fix aquila imx95 0098 pid4   Fabio Estevam
• gitignore for mkimage files   Yegor Yefremov
  • gitignore for mkimage files   Tom Rini
• [PATCH] arm: baltos: enable TI_SYSC and CLK drivers   yegorslists at googlemail.com
  • [PATCH] arm: baltos: enable TI_SYSC and CLK drivers   Anshul Dalal
    • [PATCH] arm: baltos: enable TI_SYSC and CLK drivers   Yegor Yefremov
      • [PATCH] arm: baltos: enable TI_SYSC and CLK drivers   Yegor Yefremov
• [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Kory Maincent (TI.com)
  • [PATCH v3 01/20] MAINTAINERS: Add maintainer for extension board support   Kory Maincent (TI.com)
  • [PATCH v3 02/20] board: ti: Exclude cape detection from XPL builds   Kory Maincent (TI.com)
  • [PATCH v3 03/20] board: ti: Fix CAPE_EEPROM_BUS_NUM Kconfig dependency   Kory Maincent (TI.com)
  • [PATCH v3 04/20] board: sunxi: Exclude DIP detection from XPL builds   Kory Maincent (TI.com)
  • [PATCH v3 05/20] board: compulab: Exclude compulab extension board detection from XPL builds   Kory Maincent (TI.com)
  • [PATCH v3 06/20] include: extension_board: Document the extension structure   Kory Maincent (TI.com)
  • [PATCH v3 07/20] boot: Move extension board support from cmd/ to boot/   Kory Maincent (TI.com)
  • [PATCH v3 08/20] boot: Add UCLASS support for extension boards   Kory Maincent (TI.com)
    • [PATCH v3 08/20] boot: Add UCLASS support for extension boards   Simon Glass
  • [PATCH v3 09/20] board: ti: Refactor cape detection code for readability   Kory Maincent (TI.com)
  • [PATCH v3 10/20] board: ti: Convert cape detection to use UCLASS framework   Kory Maincent (TI.com)
  • [PATCH v3 11/20] board: sunxi: Refactor CHIP board extension code   Kory Maincent (TI.com)
  • [PATCH v3 12/20] board: sunxi: Convert extension support to UCLASS framework   Kory Maincent (TI.com)
  • [PATCH v3 13/20] board: sandbox: Improve extension board scan implementation   Kory Maincent (TI.com)
  • [PATCH v3 14/20] board: sandbox: Convert extension support to UCLASS framework   Kory Maincent (TI.com)
    • [PATCH v3 14/20] board: sandbox: Convert extension support to UCLASS framework   Simon Glass
  • [PATCH v3 15/20] board: compulab: Convert imx8mm-cl-iot-gate to UCLASS extension framework   Kory Maincent (TI.com)
  • [PATCH v3 16/20] boot: Remove legacy extension board support   Kory Maincent (TI.com)
  • [PATCH v3 17/20] boot: extension: Move overlay apply custom logic to command level   Kory Maincent (TI.com)
  • [PATCH v3 18/20] boot: pxe_utils: Add extension board devicetree overlay support   Kory Maincent (TI.com)
  • [PATCH v3 19/20] boot: bootmeth_efi: Refactor distro_efi_try_bootflow_files return logic   Kory Maincent (TI.com)
  • [PATCH v3 20/20] boot: bootmeth_efi: Add extension board devicetree overlay support   Kory Maincent (TI.com)
  • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Simon Glass
    • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Tom Rini
      • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Kory Maincent
      • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Tom Rini
      • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Tom Rini
      • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Kory Maincent
      • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Tom Rini
      • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Kory Maincent
      • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Tom Rini
      • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Mattijs Korpershoek
      • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Simon Glass
      • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Kory Maincent
      • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Tom Rini
      • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Kory Maincent
      • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Tom Rini
      • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Kory Maincent
      • [PATCH v3 00/20] Convert extension support to UCLASS and adds its support to boot flows   Tom Rini
• [PATCH 0/2] A couple of patches around UEFI Debug Image Info Table   Vincent Stehlé
  • [PATCH 1/2] efi_loader: dbginfodump: use guid definition   Vincent Stehlé
  • [PATCH 2/2] lib: uuid: add efi debug image info table guid   Vincent Stehlé
• How to use ECDSA for signature verification?   Marko Mäkelä
• [PATCH] Merge cherry-pick tag 'riscv-dt-for-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt   E Shattow
  • [PATCH] Merge cherry-pick tag 'riscv-dt-for-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt   E Shattow
• [RFC PATCH 0/2] Modern pinctrl for Exynos5250 devices   Lukas Timmermann
  • [RFC PATCH 1/2] gpio: s5p_gpio: Add config option for s5p_gpio driver   Lukas Timmermann
    • [RFC PATCH 1/2] gpio: s5p_gpio: Add config option for s5p_gpio driver   Henrik Grimler
  • [RFC PATCH 2/2] pinctrl: exynos: add exynos5250 driver   Lukas Timmermann
    • [RFC PATCH 2/2] pinctrl: exynos: add exynos5250 driver   Henrik Grimler
  • [RFC PATCH 0/2] Modern pinctrl for Exynos5250 devices   Henrik Grimler
• [PATCH v1] net: designware: fix bitbang init error   Jim Liu
• [PATCH] armv8: implement workaround for broken CNTFRQ_EL0 value   Kaustabh Chakraborty
  • [PATCH] armv8: implement workaround for broken CNTFRQ_EL0 value   Ahmad Fatoum
    • [PATCH] armv8: implement workaround for broken CNTFRQ_EL0 value   Kaustabh Chakraborty
    • [PATCH] armv8: implement workaround for broken CNTFRQ_EL0 value   Ahmad Fatoum
• [PATCH] sata: sata_mv: Remove always true test   Stefan Roese
• [PATCH 0/2] mmc: octeontx_hsmmc: Fix two Smatch issues   Stefan Roese
• [PATCH] ARM: dts: pxa1908: convert to OF_UPSTREAM   Stefan Roese
• [PATCH] phy: marvell: Tighten MVEBU_COMPHY_SUPPORT dependencies   Stefan Roese
• [PATCH] pci: mvebu: Unable to assign mbus windows for 2nd pcie controller   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
  • Please pull u-boot-marvell/master   Tom Rini
• [PATCH] .gitignore: ignore more image files   yegorslists at googlemail.com
  • [PATCH] .gitignore: ignore more image files   Patrice CHOTARD
  • [PATCH] .gitignore: ignore more image files   Tom Rini
• Pull request for mix-next-14102025   Ilias Apalodimas
  • Pull request for mix-next-14102025   Tom Rini
• [PATCH v1 0/2] spi: cadence: Add xSPI controller driver support   Boon Khai Ng
  • [PATCH v1 1/2] spi: cadence: Add driver for xSPI   Boon Khai Ng
    • [PATCH v1 1/2] spi: cadence: Add driver for xSPI   Tom Rini
      • [PATCH v1 1/2] spi: cadence: Add driver for xSPI   Ng, Boon Khai
      • [PATCH v1 1/2] spi: cadence: Add driver for xSPI   Tom Rini
  • [PATCH v1 2/2] spi: Enable Kconfig and Makefile for xSPI   Boon Khai Ng
    • [PATCH v1 2/2] spi: Enable Kconfig and Makefile for xSPI   Tom Rini
      • [PATCH v1 2/2] spi: Enable Kconfig and Makefile for xSPI   Ng, Boon Khai
• Uboot upgrade from 2016 to 2020   Manea, Alexandru (Alexandru)
  • Uboot upgrade from 2016 to 2020   Tom Rini
    • Uboot upgrade from 2016 to 2020   Sinan Akman
      • [External]Re: Uboot upgrade from 2016 to 2020   Manea, Alexandru (Alexandru)
      • [External]Re: Uboot upgrade from 2016 to 2020   Sinan Akman
      • [External]Re: Uboot upgrade from 2016 to 2020   Manea, Alexandru (Alexandru)
      • [External]Re: Uboot upgrade from 2016 to 2020   Sinan Akman
• [PATCH v1 0/4] Enable XSPI1 on i.MX943 EVK board   alice.guo at oss.nxp.com
  • [PATCH v1 1/4] spi: nxp_xspi: Add new driver for NXP XSPI controller   alice.guo at oss.nxp.com
    • [PATCH v1 1/4] spi: nxp_xspi: Add new driver for NXP XSPI controller   Marek Vasut
      • 回复: [PATCH v1 1/4] spi: nxp_xspi: Add new driver for NXP XSPI controller   Alice Guo (OSS)
      • [PATCH v1 1/4] spi: nxp_xspi: Add new driver for NXP XSPI controller   Fabio Estevam
    • [PATCH v1 1/4] spi: nxp_xspi: Add new driver for NXP XSPI controller   Fabio Estevam
      • 回复: [PATCH v1 1/4] spi: nxp_xspi: Add new driver for NXP XSPI controller   Alice Guo (OSS)
  • [PATCH v1 2/4] misc: ele_api: Add support for XSPI SET GMID command   alice.guo at oss.nxp.com
  • [PATCH v1 3/4] imx94_evk: Get ownership of XSPI control registers protected by GMID in SPL   alice.guo at oss.nxp.com
  • [PATCH v1 4/4] imx943_evk: Enable XSPI1   alice.guo at oss.nxp.com
• [PATCH] mmc: exynos_dw_mmc: Add compatible string for Exynos5250   Lukas Timmermann
  • [PATCH] mmc: exynos_dw_mmc: Add compatible string for Exynos5250   Peng Fan
  • [PATCH] mmc: exynos_dw_mmc: Add compatible string for Exynos5250   Peng Fan (OSS)
• [PATCH v2 0/4] net: phy: aquantia: Switch to generic firmware loader   Beiyan Yun
  • [PATCH v2 1/4] net: phy: aquantia: switch to use phy_get_ofnode()   Beiyan Yun
  • [PATCH v2 2/4] doc: bindings: use upstream bindings for aquantia phy   Beiyan Yun
  • [PATCH v2 3/4] net: phy: aquantia: replace the "mdi-reversal" node with "marvell, mdi-cfg-order"   Beiyan Yun
  • [PATCH v2 4/4] net: phy: aquantia: use generic firmware loader   Beiyan Yun
• [PATCH v3 0/4] net: phy: aquantia: Switch to generic firmware loader   Beiyan Yun
  • [PATCH v3 1/4] net: phy: aquantia: switch to use phy_get_ofnode()   Beiyan Yun
  • [PATCH v3 2/4] doc: bindings: use upstream bindings for aquantia phy   Beiyan Yun
  • [PATCH v3 3/4] net: phy: aquantia: replace the "mdi-reversal" node with "marvell, mdi-cfg-order"   Beiyan Yun
  • [PATCH v3 4/4] net: phy: aquantia: use generic firmware loader   Beiyan Yun
    • [PATCH v3 4/4] net: phy: aquantia: use generic firmware loader   Weijie Gao
      • [PATCH v3 4/4] net: phy: aquantia: use generic firmware loader   Beiyan Yun
      • [PATCH v3 4/4] net: phy: aquantia: use generic firmware loader   Weijie Gao
      • [PATCH v3 4/4] net: phy: aquantia: use generic firmware loader   Marek Vasut
    • [PATCH v3 4/4] net: phy: aquantia: use generic firmware loader   Marek Vasut
• [bug] can't start watchdog on RK3288   Marius Dinu
  • [bug] can't start watchdog on RK3288   Peter Robinson
    • [bug] can't start watchdog on RK3288   Marius Dinu
    • [bug] can't start watchdog on RK3288   Marius Dinu
• [GIT PULL] AMD/Xilinx changes for 2026-01-rc1 v2   Michal Simek
  • [GIT PULL] AMD/Xilinx changes for 2026-01-rc1 v2   Tom Rini
• [PATCH v4 0/2] fs: semihosting: Test correct variable and fix API   Andrew Goodbody
  • [PATCH v4 1/2] fs: semihosting: Fixup smh_read against overflow   Andrew Goodbody
    • [PATCH v4 1/2] fs: semihosting: Fixup smh_read against overflow   Sean Anderson
  • [PATCH v4 2/2] fs: semihosting: Fixup smh_flen against overflow   Andrew Goodbody
    • [PATCH v4 2/2] fs: semihosting: Fixup smh_flen against overflow   Sean Anderson
      • [PATCH v4 2/2] fs: semihosting: Fixup smh_flen against overflow   Heinrich Schuchardt
      • [PATCH v4 2/2] fs: semihosting: Fixup smh_flen against overflow   Sean Anderson
      • [PATCH v4 2/2] fs: semihosting: Fixup smh_flen against overflow   Andrew Goodbody
• [PATCH RFC 0/3] clk: support arbitrary clk_register() sequence   Tom Rini
  • [PATCH RFC 0/3] clk: support arbitrary clk_register() sequence   Simon Glass
  • [PATCH RFC 0/3] clk: support arbitrary clk_register() sequence   Yang Xiwen
    • [PATCH RFC 0/3] clk: support arbitrary clk_register() sequence   Tom Rini
• [PATCH v4 0/3] Harmonize image size checks   Philip Oberfichtner
  • [PATCH v4 1/3] Image size checks: Use HAS_SIZE_LIMIT consistently   Philip Oberfichtner
  • [PATCH v4 2/3] Image size checks: Clarify help texts   Philip Oberfichtner
  • [PATCH v4 3/3] Image size checks: Deduplicate Makefile   Philip Oberfichtner
• [PATCH v2 00/10] remoteproc: Add support for i.MX8M[M/N/P/Q] and i.MX93   Peng Fan (OSS)
  • [PATCH v2 01/10] remoteproc: Extend device_to_virt with a is_iomem parameter   Peng Fan (OSS)
  • [PATCH v2 02/10] remoteproc: Add imx_rproc driver to support NXP i.MX8MP/N   Peng Fan (OSS)
  • [PATCH v2 03/10] remoteproc: imx_rproc: Support i.MX8MQ/M   Peng Fan (OSS)
  • [PATCH v2 04/10] remoteproc: imx_rproc: Add support for i.MX93 CM33   Peng Fan (OSS)
  • [PATCH v2 05/10] arm: dts: imx8m: Add remoteproc node   Peng Fan (OSS)
  • [PATCH v2 06/10] imx8mp: Enable remoteproc for i.MX8MP EVK   Peng Fan (OSS)
  • [PATCH v2 07/10] imx8mm: Enable remoteproc for i.MX8MM EVK   Peng Fan (OSS)
  • [PATCH v2 08/10] imx8mn: Enable remoteproc for i.MX8MN EVK   Peng Fan (OSS)
  • [PATCH v2 09/10] imx8mq: Enable remoteproc for i.MX8MQ EVK   Peng Fan (OSS)
  • [PATCH v2 10/10] imx93: Enable remoteproc for i.MX93-EVK/QSB/FRDM   Peng Fan (OSS)
  • [PATCH v2 00/10] remoteproc: Add support for i.MX8M[M/N/P/Q] and i.MX93   Fabio Estevam
    • [PATCH v2 00/10] remoteproc: Add support for i.MX8M[M/N/P/Q] and i.MX93   Peng Fan
    • [PATCH v2 00/10] remoteproc: Add support for i.MX8M[M/N/P/Q] and i.MX93   Peng Fan
• [PATCH] thermal: imx_tmu: Always set thermal trips from fuses   Primoz Fiser
  • [PATCH] thermal: imx_tmu: Always set thermal trips from fuses   Fabio Estevam
• [RFC PATCH v1] tools: update-subtree.sh improve user experience   E Shattow
  • [RFC PATCH v1] tools: update-subtree.sh improve user experience   Quentin Schulz
    • [RFC PATCH v1] tools: update-subtree.sh improve user experience   E Shattow
      • [RFC PATCH v1] tools: update-subtree.sh improve user experience   Quentin Schulz
• [PATCH v2 00/10] dts: starfive: cherry-pick jh7110 updates from v6.18-rc1-dts   E Shattow
  • [PATCH v2 01/10] riscv: dts: starfive: jh7110-common: drop no-sdio property from mmc1   E Shattow
  • [PATCH v2 02/10] riscv: dts: starfive: jh7110: add DMC memory controller   E Shattow
  • [PATCH v2 03/10] riscv: dts: starfive: jh7110: bootph-pre-ram hinting needed by boot loader   E Shattow
  • [PATCH v2 04/10] riscv: dts: starfive: jh7110-common: drop no-mmc property from mmc1   E Shattow
  • [PATCH v2 05/10] riscv: dts: starfive: jh7110-common: drop mmc post-power-on-delay-ms   E Shattow
  • [PATCH v2 06/10] riscv: dts: starfive: add common board dtsi for Milk-V Mars CM variants   E Shattow
  • [PATCH v2 07/10] dt-bindings: riscv: starfive: add milkv,marscm-emmc   E Shattow
  • [PATCH v2 08/10] riscv: dts: starfive: add Milk-V Mars CM system-on-module   E Shattow
  • [PATCH v2 09/10] dt-bindings: riscv: starfive: add milkv,marscm-lite   E Shattow
  • [PATCH v2 10/10] riscv: dts: starfive: add Milk-V Mars CM Lite system-on-module   E Shattow
• [PATCH v2 0/5] Allow falcon boot from A-core SPL on K3 devices   Anshul Dalal
  • [PATCH v2 1/5] spl: Kconfig: allow falcon mode for TI secure devices   Anshul Dalal
  • [PATCH v2 2/5] board: ti: common: Kconfig: add CMD_SPL   Anshul Dalal
  • [PATCH v2 3/5] arm: mach-k3: enable support for falcon mode   Anshul Dalal
  • [PATCH v2 4/5] doc: develop: add docs for secure falcon mode   Anshul Dalal
  • [PATCH v2 5/5] doc: develop: falcon: document unsetting CMD_BOOTx   Anshul Dalal
  • [PATCH v2 0/5] Allow falcon boot from A-core SPL on K3 devices   Tom Rini
• [PATCH v4 0/6] Enable Firmware Handoff CI test on qemu_arm64   Raymond Mao
  • [PATCH v4 1/6] docker: add OP-TEE and TF-A build for testing Firmware Handoff   Raymond Mao
    • [PATCH v4 1/6] docker: add OP-TEE and TF-A build for testing Firmware Handoff   Jerome Forissier
      • [PATCH v4 1/6] docker: add OP-TEE and TF-A build for testing Firmware Handoff   Tom Rini
  • [PATCH v4 2/6] pytest: add test script to validate Firmware Handoff   Raymond Mao
  • [PATCH v4 3/6] configs: select CMD_BLOBLIST for Firmware Handoff testing   Raymond Mao
  • [PATCH v4 4/6] ci: check existence of bl1 and fip in the test script   Raymond Mao
  • [PATCH v4 5/6] ci: rename conf.qemu_arm64_na to conf.qemu_arm64   Raymond Mao
  • [PATCH v4 6/6] ci: add test entries for qemu_arm64_tfa_fw_handoff   Raymond Mao
  • (subset) [PATCH v4 0/6] Enable Firmware Handoff CI test on qemu_arm64   Tom Rini
• Seeking advice on API return type inconsistency   Andrew Goodbody
  • Seeking advice on API return type inconsistency   Andrew Goodbody
    • Seeking advice on API return type inconsistency   Tom Rini
• [PATCH 00/24] clk: Remove passing of negative errors through unsigned return   Andrew Goodbody
  • [PATCH 01/24] clk: meson: Remove negative error returns from clk_get_rate   Andrew Goodbody
    • [PATCH 01/24] clk: meson: Remove negative error returns from clk_get_rate   Simon Glass
  • [PATCH 02/24] clk: sifive: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 03/24] clk: armada-37xx: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 04/24] clk: thead: th1520-ap: Remove negative error returns from clk_get_rate   Andrew Goodbody
    • [PATCH 04/24] clk: thead: th1520-ap: Remove negative error returns from clk_get_rate   Yao Zi
  • [PATCH 05/24] clk: ccf: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 06/24] clk: at91: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 07/24] clk: renesas: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 08/24] clk: rockchip: Remove negative error returns from clk_get_rate   Andrew Goodbody
    • [PATCH 08/24] clk: rockchip: Remove negative error returns from clk_get_rate   Jonas Karlman
      • [PATCH 08/24] clk: rockchip: Remove negative error returns from clk_get_rate   Andrew Goodbody
      • [PATCH 08/24] clk: rockchip: Remove negative error returns from clk_get_rate   Tom Rini
      • [PATCH 08/24] clk: rockchip: Remove negative error returns from clk_get_rate   Andrew Goodbody
      • [PATCH 08/24] clk: rockchip: Remove negative error returns from clk_get_rate   Jonas Karlman
      • [PATCH 08/24] clk: rockchip: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 09/24] clk: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 10/24] clk: starfive: Remove negative error returns from clk_get_rate   Andrew Goodbody
    • [PATCH 10/24] clk: starfive: Remove negative error returns from clk_get_rate   Hal Feng
  • [PATCH 11/24] clk: altera: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 12/24] clk: uniphier: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 13/24] clk: aspeed: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 14/24] clk: nuvoton: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 15/24] clk: exynos: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 16/24] clk: imx: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 17/24] clk: ti: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 18/24] clk: mediatek: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 19/24] clk: owl: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 20/24] clk: tegra: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 21/24] clk: adi: Remove negative error returns from clk_get_rate   Andrew Goodbody
    • [PATCH 21/24] clk: adi: Remove negative error returns from clk_get_rate   Greg Malysa
  • [PATCH 22/24] clk: sophgo: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 23/24] clk: stm32: Remove negative error returns from clk_get_rate   Andrew Goodbody
    • [PATCH 23/24] clk: stm32: Remove negative error returns from clk_get_rate   Patrice CHOTARD
  • [PATCH 24/24] clk: x86: Remove negative error returns from clk_get_rate   Andrew Goodbody
  • [PATCH 00/24] clk: Remove passing of negative errors through unsigned return   Simon Glass
    • [PATCH 00/24] clk: Remove passing of negative errors through unsigned return   Tom Rini
      • [PATCH 00/24] clk: Remove passing of negative errors through unsigned return   Philipp Tomsich
      • [PATCH 00/24] clk: Remove passing of negative errors through unsigned return   Simon Glass
      • [PATCH 00/24] clk: Remove passing of negative errors through unsigned return   Svyatoslav Ryhel
      • [PATCH 00/24] clk: Remove passing of negative errors through unsigned return   Tom Rini
      • [PATCH 00/24] clk: Remove passing of negative errors through unsigned return   Simon Glass
• [PATCH v4 00/11] boot: Support priority for global bootmeths   Simon Glass
  • [PATCH v4 01/11] boot: Try all bootmeths on the final partition   Simon Glass
    • [PATCH v4 01/11] boot: Try all bootmeths on the final partition   Tom Rini
      • [PATCH v4 01/11] boot: Try all bootmeths on the final partition   Heinrich Schuchardt
      • [PATCH v4 01/11] boot: Try all bootmeths on the final partition   Tom Rini
  • [PATCH v4 02/11] boot: Add a new test for global bootmeths   Simon Glass
  • [PATCH v4 03/11] boot: Update first_glob_method when dropping a bootmeth   Simon Glass
  • [PATCH v4 04/11] boot: Add a flag for whether there are global bootmeths   Simon Glass
  • [PATCH v4 05/11] boot: Keep track of which bootmeths have been used   Simon Glass
  • [PATCH v4 06/11] boot: Support rescanning the global bootmeths   Simon Glass
  • [PATCH v4 07/11] boot: Only run global bootmeths once each   Simon Glass
  • [PATCH v4 08/11] boot: Implement a priority for global bootmeths   Simon Glass
  • [PATCH v4 09/11] boot: Don't change the method count after global bootmeths   Simon Glass
  • [PATCH v4 10/11] boot: Run global bootmeths after all bootdevs are exhausted   Simon Glass
  • [PATCH v4 11/11] boot: Run the EFI bootmgr just before network devices   Simon Glass
  • [PATCH v4 00/11] boot: Support priority for global bootmeths   Tom Rini
  • [PATCH v4 00/11] boot: Support priority for global bootmeths   Tom Rini
• [PATCH v2] gpio: dwapb: Enable SPL support for DWAPB GPIO driver   Tanmay Kathpalia
  • [PATCH v2] gpio: dwapb: Enable SPL support for DWAPB GPIO driver   Tom Rini
• [PATCH v4 0/8] initial U-Boot SPL support on Amlogic GX SoCs   Ferass El Hafidi
  • [PATCH v4 1/8] tools: mkimage: Add Amlogic Boot Image type   Ferass El Hafidi
  • [PATCH v4 3/8] serial: serial_meson: add minimal non-DM driver   Ferass El Hafidi
  • [PATCH v4 4/8] arm: meson: initial u-boot SPL support for GX SoCs   Ferass El Hafidi
  • [PATCH v4 5/8] arm: meson: spl: add support for SPL DRAM init   Ferass El Hafidi
  • [PATCH v4 6/8] arm: dts: meson-gx-u-boot: add binman configuration for U-Boot SPL   Ferass El Hafidi
    • [PATCH v4 6/8] arm: dts: meson-gx-u-boot: add binman configuration for U-Boot SPL   Quentin Schulz
      • [PATCH v4 6/8] arm: dts: meson-gx-u-boot: add binman configuration for U-Boot SPL   Ferass El Hafidi
      • [PATCH v4 6/8] arm: dts: meson-gx-u-boot: add binman configuration for U-Boot SPL   Quentin Schulz
      • [PATCH v4 6/8] arm: dts: meson-gx-u-boot: add binman configuration for U-Boot SPL   Ferass El Hafidi
  • [PATCH v4 7/8] board: amlogic: add kconfig fragments for SPL   Ferass El Hafidi
  • [PATCH v4 8/8] doc: board: amlogic: add u-boot-spl documentation   Ferass El Hafidi
• [PATCH v4 2/8] mmc: meson_gx_mmc: add minimal non-DM driver   Ferass El Hafidi
• [PATCH v2] gpio: search gpio-line-names property in dm_gpio_lookup_name   Rasmus Villemoes
  • [PATCH v2] gpio: search gpio-line-names property in dm_gpio_lookup_name   Tom Rini
• [PATCH v1 1/1] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation   Andre Przywara
• [GIT,PULL] u-boot-riscv/master   Leo Liang
  • [GIT,PULL] u-boot-riscv/master   Tom Rini
• [PATCH] watchdog: Tighten some watchdog driver dependencies   Stefan Roese
• Please pull u-boot-watchdog/master   Stefan Roese
  • Please pull u-boot-watchdog/master   Tom Rini
• [PATCH] cmd/part.c: implement "part name" subcommand   Rasmus Villemoes
  • [PATCH] cmd/part.c: implement "part name" subcommand   Quentin Schulz
    • [PATCH] cmd/part.c: implement "part name" subcommand   Rasmus Villemoes
      • [PATCH] cmd/part.c: implement "part name" subcommand   Quentin Schulz
• [PATCH] arm: armv8: Make save_boot_params simpler   Ilias Apalodimas
  • [PATCH] arm: armv8: Make save_boot_params simpler   Tom Rini
• [PATCH 00/24] Introduce Allwinner H6/H616 NAND controller support   Richard Genoud
  • [PATCH 01/24] mtd: rawnand: sunxi: cosmetic: remove needless comment   Richard Genoud
    • [PATCH 01/24] mtd: rawnand: sunxi: cosmetic: remove needless comment   Andre Przywara
  • [PATCH 02/24] mtd: rawnand: sunxi_spl: fix pointer from integer without a cast   Richard Genoud
    • [PATCH 02/24] mtd: rawnand: sunxi_spl: fix pointer from integer without a cast   Andre Przywara
      • [PATCH 02/24] mtd: rawnand: sunxi_spl: fix pointer from integer without a cast   Richard GENOUD
  • [PATCH 03/24] mtd: rawnand: sunxi_spl: cosmetic: harmonize register defines with non spl file   Richard Genoud
    • [PATCH 03/24] mtd: rawnand: sunxi_spl: cosmetic: harmonize register defines with non spl file   Andre Przywara
      • [PATCH 03/24] mtd: rawnand: sunxi_spl: cosmetic: harmonize register defines with non spl file   Richard GENOUD
      • [PATCH 03/24] mtd: rawnand: sunxi_spl: cosmetic: harmonize register defines with non spl file   Andre Przywara
  • [PATCH 04/24] mtd: rawnand: sunxi_spl: cosmetic: use definitions from linux/mtd/rawnand.h   Richard Genoud
    • [PATCH 04/24] mtd: rawnand: sunxi_spl: cosmetic: use definitions from linux/mtd/rawnand.h   Andre Przywara
  • [PATCH 05/24] mtd: rawnand: sunxi_spl: cosmetic: replace AHB_DIV_1 by CCM_NAND_CTRL_M/N   Richard Genoud
    • [PATCH 05/24] mtd: rawnand: sunxi_spl: cosmetic: replace AHB_DIV_1 by CCM_NAND_CTRL_M/N   Andre Przywara
      • [PATCH 05/24] mtd: rawnand: sunxi_spl: cosmetic: replace AHB_DIV_1 by CCM_NAND_CTRL_M/N   Richard GENOUD
  • [PATCH 06/24] mtd: rawnand: sunxi: cosmetic: merge register definitions for sunxi_nand{, _spl}.c   Richard Genoud
    • [PATCH 06/24] mtd: rawnand: sunxi: cosmetic: merge register definitions for sunxi_nand{,_spl}.c   Andre Przywara
  • [PATCH 07/24] mtd: rawnand: sunxi: cosmetic: add per SoC capabilities   Richard Genoud
    • [PATCH 07/24] mtd: rawnand: sunxi: cosmetic: add per SoC capabilities   Andre Przywara
  • [PATCH 08/24] mtd: rawnand: sunxi: cosmetic: move ECC_ERR_CNT register offset in SoC caps   Richard Genoud
    • [PATCH 08/24] mtd: rawnand: sunxi: cosmetic: move ECC_ERR_CNT register offset in SoC caps   Andre Przywara
  • [PATCH 09/24] mtd: rawnand: sunxi: cosmetic: move USER_DATA register offset in SoC caps   Richard Genoud
    • [PATCH 09/24] mtd: rawnand: sunxi: cosmetic: move USER_DATA register offset in SoC caps   Andre Przywara
  • [PATCH 10/24] mtd: rawnand: sunxi: cosmetic: move ECC_PAT_FOUND register in SoC caps   Richard Genoud
    • [PATCH 10/24] mtd: rawnand: sunxi: cosmetic: move ECC_PAT_FOUND register in SoC caps   Andre Przywara
      • [PATCH 10/24] mtd: rawnand: sunxi: cosmetic: move ECC_PAT_FOUND register in SoC caps   Richard GENOUD
  • [PATCH 11/24] mtd: rawnand: sunxi: cosmetic: add has_ecc_block_512 capability   Richard Genoud
    • [PATCH 11/24] mtd: rawnand: sunxi: cosmetic: add has_ecc_block_512 capability   Andre Przywara
      • [PATCH 11/24] mtd: rawnand: sunxi: cosmetic: add has_ecc_block_512 capability   Richard GENOUD
  • [PATCH 12/24] mtd: rawnand: sunxi: cosmetic: move NFC_ECC_MODE offset in SoC caps   Richard Genoud
  • [PATCH 13/24] mtd: rawnand: sunxi: cosmetic: introduce reg_pat_id in sunxi_nfc_caps   Richard Genoud
  • [PATCH 14/24] mtd: rawnand: sunxi_spl: cosmetic: add per SoC capabilities   Richard Genoud
  • [PATCH 15/24] mtd: rawnand: sunxi: cosmetic: move NFC_RANDOM_EN register offset in SoC caps   Richard Genoud
  • [PATCH 16/24] mtd: rawnand: sunxi: cosmetic: introduce reg_spare_area in sunxi_nfc_caps   Richard Genoud
  • [PATCH 17/24] mtd: rawnand: sunxi_spl: use NFC_ECC_ERR_MSK and NFC_ECC_PAT_FOUND   Richard Genoud
  • [PATCH 18/24] mtd: rawnand: sunxi_spl: increase max_oobsize for 2KiB pages   Richard Genoud
  • [PATCH 19/24] mtd: rawnand: sunxi_spl: cosmetic: use NFC_ECC_MODE and NFC_RANDOM_SEED macros   Richard Genoud
  • [PATCH 20/24] sunxi: clock: H6: add NAND controller clock registers   Richard Genoud
  • [PATCH 21/24] clk: sunxi: Add MBUS Master Clock Gating Register   Richard Genoud
  • [PATCH 22/24] mtd: rawnand: sunxi: add support for H6/H616 nand controller   Richard Genoud
    • [PATCH 22/24] mtd: rawnand: sunxi: add support for H6/H616 nand controller   Richard GENOUD
  • [PATCH 23/24] mtd: rawnand: sunxi_spl: add support for H6/H616 nand controller   Richard Genoud
  • [PATCH 24/24] mtd: rawnand: sunxi_spl: Fix cast to pointer from integer warnings   Richard Genoud
• [PATCH v2] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation   Lukas Schmid
  • [PATCH v2] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation   Andre Przywara
    • [PATCH v2] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation   John Watts
• [PATCH 1/1] riscv: consider CONFIG_RISCV_ISA_ZAAMO in SPL too   Heinrich Schuchardt
  • [PATCH 1/1] riscv: consider CONFIG_RISCV_ISA_ZAAMO in SPL too   Heinrich Schuchardt
    • [PATCH 1/1] riscv: consider CONFIG_RISCV_ISA_ZAAMO in SPL too   Yao Zi
      • [PATCH 1/1] riscv: consider CONFIG_RISCV_ISA_ZAAMO in SPL too   Heinrich Schuchardt
      • [PATCH 1/1] riscv: consider CONFIG_RISCV_ISA_ZAAMO in SPL too   Hal Feng
      • [PATCH 1/1] riscv: consider CONFIG_RISCV_ISA_ZAAMO in SPL too   Yao Zi
      • [PATCH 1/1] riscv: consider CONFIG_RISCV_ISA_ZAAMO in SPL too   Heinrich Schuchardt
  • [PATCH 1/1] riscv: consider CONFIG_RISCV_ISA_ZAAMO in SPL too   E Shattow
• [PATCH V1 0/1] MTD/SPI-NOR: Add new device   Victor
  • [PATCH V1 1/1] MTD/SPI-NOR: Add new device   Victor
• [PATCH] phy: ti: phy-j721e-wiz: Allow reinitialization when SERDES is pre-configured   Hrushikesh Salunke
  • [PATCH] phy: ti: phy-j721e-wiz: Allow reinitialization when SERDES is pre-configured   Tom Rini
• [PATCH] board: am62x: Add support for reading eeprom data   Guillaume La Roque (TI.com)
  • [PATCH] board: am62x: Add support for reading eeprom data   Mattijs Korpershoek
    • [PATCH] board: am62x: Add support for reading eeprom data   Guillaume La Roque
• [PATCH 0/5] firmware: scmi: Support SCMI LMM/CPU protocol for i.MX95   Peng Fan (OSS)
  • [PATCH 1/5] firmware: scmi: Conditionally compile protocol support   Peng Fan (OSS)
  • [PATCH 2/5] firmware: scmi: Cleanup the SCMI MISC ID   Peng Fan (OSS)
  • [PATCH 3/5] firmware: scmi: Support probe vendor ID 0x80 and 0x82   Peng Fan (OSS)
  • [PATCH 4/5] firmware: scmi: Add i.MX95 SCMI LMM protocol driver   Peng Fan (OSS)
  • [PATCH 5/5] firmware: scmi: Add i.MX95 SCMI CPU Protocol   Peng Fan (OSS)
  • 回复: [PATCH 0/5] firmware: scmi: Support SCMI LMM/CPU protocol for i.MX95   Alice Guo (OSS)
  • [PATCH 0/5] firmware: scmi: Support SCMI LMM/CPU protocol for i.MX95   Tom Rini
• [PATCH] doc: ti: j722s_evm: drop outdated boot note   Peter Robinson
• [PATCH 0/5] stm32mp2: Fix stm32mp2xx-dk board boot issue   Patrice Chotard
  • [PATCH 1/5] ARM: dts: Add stm32mp257f-dk-u-boot.dtsi   Patrice Chotard
  • [PATCH 3/5] ARM: dts: Fix "arm, smc-id" value for stm32mp25-u-boot.dtsi   Patrice Chotard
  • [PATCH 4/5] ARM: dts: Add txbyteclk clock in stm32mp235f-dk-u-boot.dtsi   Patrice Chotard
  • [PATCH 5/5] stm32mp: Add stm32mp23 support for syscon driver   Patrice Chotard
• [PATCH 2/5] ARM: dts: Fix "arm, smc-id" value for stm32mp23-u-boot.dtsi   Patrice Chotard
• [PATCH 1/2] ARM: dts: Remove u-boot, boot-led from stm32mp257f-ev1-u-boot   Patrice Chotard
  • [PATCH 2/2] ARM: dts: Remove u-boot, boot-led from stm32mp235f-dk-u-boot   Patrice Chotard
  • [PATCH 1/2] ARM: dts: Remove u-boot,boot-led from stm32mp257f-ev1-u-boot   Patrice CHOTARD
• [PATCH v11 00/11] Add support for dynamic MMU configuration   Anshul Dalal
  • [PATCH v11 01/11] mach-k3: use minimal memory map for all K3   Anshul Dalal
  • [PATCH v11 02/11] mach-k3: use custom enable_cache   Anshul Dalal
  • [PATCH v11 03/11] arm: armv8: mmu: export mmu_setup   Anshul Dalal
  • [PATCH v11 04/11] arm: armv8: invalidate dcache entries on dcache_enable   Anshul Dalal
  • [PATCH v11 05/11] arm: armv8: mmu: add mem_map_from_dram_banks   Anshul Dalal
  • [PATCH v11 06/11] mach-k3: map all banks using mem_map_from_dram_banks   Anshul Dalal
  • [PATCH v11 07/11] arm: armv8: mmu: add mmu_unmap_reserved_mem   Anshul Dalal
  • [PATCH v11 08/11] spl: split spl_board_fixups to arch/board specific   Anshul Dalal
  • [PATCH v11 09/11] mach-k3: add reserved memory fixups for next boot stage   Anshul Dalal
  • [PATCH v11 10/11] mach-k3: add carveouts for TFA and optee   Anshul Dalal
  • [PATCH v11 11/11] arm: mach-k3: reserve space for page table entries   Anshul Dalal
  • [PATCH v11 00/11] Add support for dynamic MMU configuration   Tom Rini
  • [REGRESSION] Re: [PATCH v11 00/11] Add support for dynamic MMU configuration   Francesco Dolcini
    • [REGRESSION] Re: [PATCH v11 00/11] Add support for dynamic MMU configuration   Anshul Dalal
      • [REGRESSION] Re: [PATCH v11 00/11] Add support for dynamic MMU configuration   Emanuele Ghidoli
      • [REGRESSION] Re: [PATCH v11 00/11] Add support for dynamic MMU configuration   Anshul Dalal
• [PATCH v2 0/5] android: add bootconfig support   Guillaume La Roque (TI.com)
  • [PATCH v2 1/5] boot: android: import addBootConfigParameters() from AOSP   Guillaume La Roque (TI.com)
  • [PATCH v2 2/5] boot: android: Add sandbox memory mapping support   Guillaume La Roque (TI.com)
  • [PATCH v2 3/5] boot: android: Add bootconfig support   Guillaume La Roque (TI.com)
  • [PATCH v2 4/5] cmd: abootimg: Add 'get ramdisk' command   Guillaume La Roque (TI.com)
  • [PATCH v2 5/5] test: abootimg: Add test for bootconfig handling   Guillaume La Roque (TI.com)
    • [PATCH v2 5/5] test: abootimg: Add test for bootconfig handling   Simon Glass
      • [PATCH v2 5/5] test: abootimg: Add test for bootconfig handling   Tom Rini
      • [PATCH v2 5/5] test: abootimg: Add test for bootconfig handling   Simon Glass
      • [PATCH v2 5/5] test: abootimg: Add test for bootconfig handling   Guillaume La Roque
      • [PATCH v2 5/5] test: abootimg: Add test for bootconfig handling   Tom Rini
  • [PATCH v2 0/5] android: add bootconfig support   george chan
    • [PATCH v2 0/5] android: add bootconfig support   Guillaume La Roque
      • [PATCH v2 0/5] android: add bootconfig support   george chan
• [PATCH] mtd: add missing prototype for mtd_read_oob_bf()   Shiji Yang
• [PATCH 0/5] stm32mp2: Update led management for stm32mp2 boards   Patrice Chotard
  • [PATCH 1/5] ARM: dts: Remove u-boot, boot-led from stm32mp257f-ev1-u-boot   Patrice Chotard
  • [PATCH 3/5] board: st: Update LED management for stm32mp2   Patrice Chotard
  • [PATCH 4/5] configs: stm32mp2: Enable LED_BOOT for stm32mp25_defconfig   Patrice Chotard
  • [PATCH 5/5] configs: stm32mp2: Enable LED_BOOT for stm32mp23_defconfig   Patrice Chotard
• [PATCH 2/5] ARM: dts: Remove u-boot, boot-led from stm32mp235f-dk-u-boot   Patrice Chotard
• [PATCH v2] armv8: implement workaround for broken CNTFRQ_EL0 value   Kaustabh Chakraborty
  • [PATCH v2] armv8: implement workaround for broken CNTFRQ_EL0 value   Tom Rini
    • [PATCH v2] armv8: implement workaround for broken CNTFRQ_EL0 value   Kaustabh Chakraborty
  • [PATCH v2] armv8: implement workaround for broken CNTFRQ_EL0 value   Tom Rini
• [PATCH 0/6] Support for Samsung Exynos 7870 CCF driver   Kaustabh Chakraborty
  • [PATCH 1/6] clk: exynos: provide device pointer to clk_register_* functions   Kaustabh Chakraborty
  • [PATCH 2/6] clk: exynos: add support for fixed rate and fixed factor clocks   Kaustabh Chakraborty
  • [PATCH 3/6] clk: exynos: add support for PLL1417X   Kaustabh Chakraborty
  • [PATCH 4/6] clk: exynos: add function for Samsung CMU ops->request   Kaustabh Chakraborty
  • [PATCH 5/6] clk: exynos: add support for Exynos7870 CMU   Kaustabh Chakraborty
  • [PATCH 6/6] clk: use private clk struct to access clock flags   Kaustabh Chakraborty
• [PATCH] gpio: s5p: increment bank base address only if bank is initialized   Kaustabh Chakraborty
  • [PATCH] gpio: s5p: increment bank base address only if bank is initialized   Henrik Grimler
• [PATCH] i2c: samsung: add support for Exynos7 HS-I2C   Kaustabh Chakraborty
  • [PATCH] i2c: samsung: add support for Exynos7 HS-I2C   Heiko Schocher
    • [PATCH] i2c: samsung: add support for Exynos7 HS-I2C   Kaustabh Chakraborty
• [PATCH 0/9] Support for Samsung Exynos 7870 DW-MMC device in driver   Kaustabh Chakraborty
  • [PATCH 1/9] mmc: dw_mmc: export dwmci_send_cmd() and dwmci_set_ios()   Kaustabh Chakraborty
    • [PATCH 1/9] mmc: dw_mmc: export dwmci_send_cmd() and dwmci_set_ios()   Peng Fan
  • [PATCH 2/9] mmc: dw_mmc: do not skip dwmci_setup_bus() for same non-zero clock frequency   Kaustabh Chakraborty
    • [PATCH 2/9] mmc: dw_mmc: do not skip dwmci_setup_bus() for same non-zero clock frequency   Peng Fan
  • [PATCH 3/9] mmc: dw_mmc: properly address command completion in dwmci_control_clken()   Kaustabh Chakraborty
    • [PATCH 3/9] mmc: dw_mmc: properly address command completion in dwmci_control_clken()   Peng Fan
      • [PATCH 3/9] mmc: dw_mmc: properly address command completion in dwmci_control_clken()   Kaustabh Chakraborty
  • [PATCH 4/9] mmc: dw_mmc: add voltage switch command flag   Kaustabh Chakraborty
    • [PATCH 4/9] mmc: dw_mmc: add voltage switch command flag   Peng Fan
      • [PATCH 4/9] mmc: dw_mmc: add voltage switch command flag   Kaustabh Chakraborty
  • [PATCH 5/9] mmc: dw_mmc: return error for invalid voltage setting   Kaustabh Chakraborty
    • [PATCH 5/9] mmc: dw_mmc: return error for invalid voltage setting   Peng Fan
  • [PATCH 6/9] mmc: enable/disable VQMMC regulator only during MMC power cycle   Kaustabh Chakraborty
  • [PATCH 7/9] mmc: exynos_dw_mmc: add support for MMC HS200 and HS400 modes   Kaustabh Chakraborty
    • [PATCH 7/9] mmc: exynos_dw_mmc: add support for MMC HS200 and HS400 modes   Peng Fan
    • [PATCH 7/9] mmc: exynos_dw_mmc: add support for MMC HS200 and HS400 modes   Tanmay Kathpalia
    • [PATCH 7/9] mmc: exynos_dw_mmc: add support for MMC HS200 and HS400 modes   Tanmay Kathpalia
  • [PATCH 8/9] mmc: exynos_dw_mmc: add support for SD UHS mode   Kaustabh Chakraborty
    • [PATCH 8/9] mmc: exynos_dw_mmc: add support for SD UHS mode   Peng Fan
  • [PATCH 9/9] mmc: exynos_dw_mmc: add compatible for exynos7870-dw-mshc-smu   Kaustabh Chakraborty
    • [PATCH 9/9] mmc: exynos_dw_mmc: add compatible for exynos7870-dw-mshc-smu   Peng Fan
  • [PATCH 0/9] Support for Samsung Exynos 7870 DW-MMC device in driver   Peng Fan (OSS)
• [RFH] Future direction of the U-Boot project   Philippe Reynes
• [PATCH 0/2] Support for Samsung Exynos 7870 USB PHY device in driver   Kaustabh Chakraborty
  • [PATCH 1/2] phy: samsung: add enum for variants based on SoCs   Kaustabh Chakraborty
  • [PATCH 2/2] phy: samsung: add support for exynos7870 USB PHY   Kaustabh Chakraborty
• [PATCH 0/2] Support for Samsung Exynos 7870 pin controllers in driver   Kaustabh Chakraborty
  • [PATCH 1/2] pinctrl: exynos: bind GPIO driver along with pinctrl   Kaustabh Chakraborty
  • [PATCH 2/2] pinctrl: exynos78x0: add proper support for exynos7870 pinctrl   Kaustabh Chakraborty
• [PATCH 0/6] Support for Samsung S2MPU05 PMIC device in driver   Kaustabh Chakraborty
  • [PATCH 1/6] power: pmic: s2mps11: change the probe function to bind   Kaustabh Chakraborty
    • [PATCH 1/6] power: pmic: s2mps11: change the probe function to bind   Peng Fan
  • [PATCH 2/6] power: pmic: s2mps11: add support for allowing multiple device variants   Kaustabh Chakraborty
    • [PATCH 2/6] power: pmic: s2mps11: add support for allowing multiple device variants   Peng Fan
  • [PATCH 3/6] power: regulator: s2mps11: declaratively define LDOs and BUCKs   Kaustabh Chakraborty
    • [PATCH 3/6] power: regulator: s2mps11: declaratively define LDOs and BUCKs   Peng Fan
  • [PATCH 4/6] power: regulator: s2mps11: declaratively get/set regulator mode   Kaustabh Chakraborty
    • [PATCH 4/6] power: regulator: s2mps11: declaratively get/set regulator mode   Peng Fan
  • [PATCH 5/6] power: regulator: s2mps11: add support for S2MPU05 PMIC   Kaustabh Chakraborty
    • [PATCH 5/6] power: regulator: s2mps11: add support for S2MPU05 PMIC   Peng Fan
  • [PATCH 6/6] power: pmic: s2mps11: add support for Samsung S2MPU05 PMIC   Kaustabh Chakraborty
    • [PATCH 6/6] power: pmic: s2mps11: add support for Samsung S2MPU05 PMIC   Peng Fan
  • [PATCH 0/6] Support for Samsung S2MPU05 PMIC device in driver   Peng Fan (OSS)
• [PATCH] serial: s5p: add compatible for exynos8895   Kaustabh Chakraborty
  • [PATCH] serial: s5p: add compatible for exynos8895   Henrik Grimler
• [PATCH] soc: exynos-pmu: add support for Exynos7 PMU   Kaustabh Chakraborty
• [PATCH 0/2] Support for Samsung Exynos 7870 DW-USB device in controller   Kaustabh Chakraborty
  • [PATCH 1/2] usb: dwc3-generic: allow fallback of dr_mode property to "otg"   Kaustabh Chakraborty
  • [PATCH 2/2] usb: dwc3-generic: add support for exynos7870   Kaustabh Chakraborty
• Github testing stalled?   Andrew Goodbody
  • Github testing stalled?   Tom Rini
• [PATCH] board: samsung: add support for Samsung Exynos mobile device boards   Kaustabh Chakraborty
  • [PATCH] board: samsung: add support for Samsung Exynos mobile device boards   Henrik Grimler
    • [PATCH] board: samsung: add support for Samsung Exynos mobile device boards   Kaustabh Chakraborty
    • [PATCH] board: samsung: add support for Samsung Exynos mobile device board   Henrik Grimler
      • [PATCH] board: samsung: add support for Samsung Exynos mobile device board   Kaustabh Chakraborty
      • [PATCH] board: samsung: add support for Samsung Exynos mobile device board   Henrik Grimler
• [PATCH] Add support for OpenSSL Provider API   Eddie Kovsky
  • [PATCH] Add support for OpenSSL Provider API   Tom Rini
    • [PATCH] Add support for OpenSSL Provider API   Eddie Kovsky
  • [PATCH] Add support for OpenSSL Provider API   Mark Kettenis
    • [PATCH] Add support for OpenSSL Provider API   Eddie Kovsky
• [PATCH] Allwinner: fix booting on a number of devices   Peter Robinson
• [PATCH v4 0/7] Add support for secure falcon mode: disable fallback   Anshul Dalal
  • [PATCH v4 2/7] spl: mmc: split spl_mmc_do_fs_boot into regular/os_boot   Anshul Dalal
  • [PATCH v4 3/7] spl: ubi: refactor spl_ubi_load_image for falcon mode   Anshul Dalal
  • [PATCH v4 4/7] spl: spi: refactor spl_spi_load_image for falcon mode   Anshul Dalal
  • [PATCH v4 5/7] spl: nor: refactor spl_nor_load_image for falcon mode   Anshul Dalal
  • [PATCH v4 6/7] spl: nand: refactor spl_nand_load_image for falcon mode   Anshul Dalal
  • [PATCH v4 7/7] spl: falcon: disable fallback to U-Boot on failure   Anshul Dalal
  • [PATCH v4 0/7] Add support for secure falcon mode: disable fallback   Tom Rini
• [PATCH v4 1/7] spl: Kconfig: add SPL_OS_BOOT_SECURE config symbol   Anshul Dalal
• [PATCH] ARM: dts: renesas: Disable R8A779G0 V4H White Hawk RPC SPI DT node again   Marek Vasut
• [PATCH] ARM: dts: renesas: Reinstate R8A779H0 V4M U-Boot DTs   Marek Vasut
• [PATCH] ARM: dts: renesas: Disable RPC driver on R8A779H0 V4M Gray Hawk board   Marek Vasut
• [PATCH RFC] lib: optee: forbid OP-TEE OS loading without adding OP-TEE OS reserved-memory nodes   Tom Rini
• [PULL] u-boot-sh/master   Marek Vasut
  • [PULL] u-boot-sh/master   Tom Rini
  • [PULL] u-boot-sh/master   Marek Vasut
    • [PULL] u-boot-sh/master   Tom Rini
• [bug] RK3288: usb won't start   Marius Dinu
• [PATCH 1/1] doc: separate read and write command documentation   Heinrich Schuchardt
• [PATCH 0/2] Add support for FriendlyElec NanoPi Zero2 board   Yao Zi
  • [PATCH 1/2] arm64: dts: rockchip: Add FriendlyElec NanoPi Zero2   Yao Zi
  • [PATCH 2/2] board: rockchip: Add FriendlyElec NanoPi Zero2   Yao Zi
    • [PATCH 2/2] board: rockchip: Add FriendlyElec NanoPi Zero2   Jonas Karlman
      • [PATCH 2/2] board: rockchip: Add FriendlyElec NanoPi Zero2   Yao Zi
      • [PATCH 2/2] board: rockchip: Add FriendlyElec NanoPi Zero2   Quentin Schulz
      • [PATCH 2/2] board: rockchip: Add FriendlyElec NanoPi Zero2   Jonas Karlman
• [PATCH] Altera SoCFpga Boot Stall Fix   Brian Sune
  • [PATCH] Altera SoCFpga Boot Stall Fix   Sune Brian
• [PATCH v3 0/4] rockchip: Add support for RAM boot from maskrom mode   Dang Huynh
• [PATCH] rockchip: rk3528-radxa-e20c: Drop eMMC HS200 prop from board u-boot.dtsi   Jonas Karlman
  • [PATCH] rockchip: rk3528-radxa-e20c: Drop eMMC HS200 prop from board u-boot.dtsi   Quentin Schulz
  • [PATCH] rockchip: rk3528-radxa-e20c: Drop eMMC HS200 prop from board u-boot.dtsi   Kever Yang
• [PATCH v2] Altera SoCFpga Boot Stall Fix   Brian Sune
• [PATCH] efi: Select required CMDs from BOOTMETH_EFILOADER   Jan Kiszka
  • [PATCH] efi: Select required CMDs from BOOTMETH_EFILOADER   Simon Glass
    • [PATCH] efi: Select required CMDs from BOOTMETH_EFILOADER   Jan Kiszka
    • [PATCH] efi: Select required CMDs from BOOTMETH_EFILOADER   Tom Rini
      • [PATCH] efi: Select required CMDs from BOOTMETH_EFILOADER   Jan Kiszka
• [PATCH 0/2] rockchip: rk3568: Disable USB3OTG U3 ports early   Jonas Karlman
  • [PATCH 1/2] phy: rockchip: naneng-combphy: Enable U3 port for USB3OTG on RK3568   Jonas Karlman
  • [PATCH 2/2] rockchip: rk3568: Disable USB3OTG U3 ports early   Jonas Karlman
    • [PATCH 2/2] rockchip: rk3568: Disable USB3OTG U3 ports early   Quentin Schulz
• [PATCH v4 0/5] board: rockchip: Add Radxa ROCK 4D   Jonas Karlman
  • [PATCH v4 1/5] spi: rockchip_sfc: Support sclk_x2 version   Jonas Karlman
    • [PATCH v4 1/5] spi: rockchip_sfc: Support sclk_x2 version   Kever Yang
  • [PATCH v4 2/5] rockchip: spl: Add a read_brom_bootsource_id() helper   Jonas Karlman
    • [PATCH v4 2/5] rockchip: spl: Add a read_brom_bootsource_id() helper   Kever Yang
  • [PATCH v4 3/5] rockchip: rk3528: Implement read_brom_bootsource_id()   Jonas Karlman
    • [PATCH v4 3/5] rockchip: rk3528: Implement read_brom_bootsource_id()   Kever Yang
  • [PATCH v4 4/5] rockchip: rk3576: Add SPI Flash boot support   Jonas Karlman
    • [PATCH v4 4/5] rockchip: rk3576: Add SPI Flash boot support   Kever Yang
  • [PATCH v4 5/5] board: rockchip: Add Radxa ROCK 4D   Jonas Karlman
    • [PATCH v4 5/5] board: rockchip: Add Radxa ROCK 4D   Kever Yang
• [PATCH v2 0/2] board: rockchip: Add Luckfox Omni3576 and FriendlyElec NanoPi M5   Jonas Karlman
  • [PATCH v2 1/2] board: rockchip: Add Luckfox Omni3576   Jonas Karlman
    • [PATCH v2 1/2] board: rockchip: Add Luckfox Omni3576   Kever Yang
  • [PATCH v2 2/2] board: rockchip: Add FriendlyElec NanoPi M5   Jonas Karlman
    • [PATCH v2 2/2] board: rockchip: Add FriendlyElec NanoPi M5   Kever Yang
• [PATCH 0/4] board: rockchip: Add Radxa ROCK 2A/2F and ArmSoM Sige1   Jonas Karlman
  • [PATCH 1/4] arm64: dts: rockchip: Add Radxa ROCK 2A/2F   Jonas Karlman
    • [PATCH 1/4] arm64: dts: rockchip: Add Radxa ROCK 2A/2F   Kever Yang
    • [PATCH 1/4] arm64: dts: rockchip: Add Radxa ROCK 2A/2F   Kever Yang
  • [PATCH 2/4] board: rockchip: Add Radxa ROCK 2A/2F   Jonas Karlman
    • [PATCH 2/4] board: rockchip: Add Radxa ROCK 2A/2F   Kever Yang
  • [PATCH 3/4] arm64: dts: rockchip: Add ArmSoM Sige1   Jonas Karlman
    • [PATCH 3/4] arm64: dts: rockchip: Add ArmSoM Sige1   Kever Yang
  • [PATCH 4/4] board: rockchip: Add ArmSoM Sige1   Jonas Karlman
    • [PATCH 4/4] board: rockchip: Add ArmSoM Sige1   Kever Yang
• [PATCH v2 1/2] ufs: core: Add ufshcd_dme_enable() and ufshcd_dme_reset()   Shawn Lin
  • [PATCH v2 2/2] ufs: rockchip: Add initial support   Shawn Lin
    • [PATCH v2 2/2] ufs: rockchip: Add initial support   Neil Armstrong
  • [PATCH v2 1/2] ufs: core: Add ufshcd_dme_enable() and ufshcd_dme_reset()   Neil Armstrong
• [PATCH] doc: board: nxp: Add remoteproc guide   Peng Fan
  • [PATCH] doc: board: nxp: Add remoteproc guide   Tom Rini
    • [PATCH] doc: board: nxp: Add remoteproc guide   Peng Fan
• [PATCH] mtd: spi-nor: Set address mode in SEMPER flash when SFDP is skipped   tkuw584924 at gmail.com
  • [PATCH] mtd: spi-nor: Set address mode in SEMPER flash when SFDP is skipped   Tudor Ambarus
    • [PATCH] mtd: spi-nor: Set address mode in SEMPER flash when SFDP is skipped   Takahiro Kuwano
      • [PATCH] mtd: spi-nor: Set address mode in SEMPER flash when SFDP is skipped   Tudor Ambarus
      • [PATCH] mtd: spi-nor: Set address mode in SEMPER flash when SFDP is skipped   Takahiro Kuwano
• [PATCH v3 1/2] ufs: core: Add ufshcd_dme_enable() and ufshcd_dme_reset()   Shawn Lin
  • [PATCH v3 2/2] ufs: rockchip: Add initial support   Shawn Lin
  • [PATCH v3 1/2] ufs: core: Add ufshcd_dme_enable() and ufshcd_dme_reset()   Neil Armstrong
• [PATCH] FPGA2SDRAM setup fix   Brian Sune
  • [PATCH] FPGA2SDRAM setup fix   Fabio Estevam
    • [PATCH] FPGA2SDRAM setup fix   Sune Brian
  • [PATCH] FPGA2SDRAM setup fix   Brian Sune
  • [PATCH] FPGA2SDRAM setup fix   Brian Sune
• Pull request efi-2026-01-rc1   Heinrich Schuchardt
  • Pull request efi-2026-01-rc1   Tom Rini
• Booting from SD-card on StarFive VisionFive 2 is broken in master   Yao Zi
  • Booting from SD-card on StarFive VisionFive 2 is broken in master   Yao Zi
    • Booting from SD-card on StarFive VisionFive 2 is broken in master   E Shattow
• [PATCH v2 0/2] 'part name' subcommand and some robustification   Rasmus Villemoes
  • [PATCH v2 1/2] disk/part.c: ensure strings in struct disk_partition are valid after successful get_info   Rasmus Villemoes
  • [PATCH v2 2/2] cmd/part.c: implement "part name" subcommand   Rasmus Villemoes
• [PATCH] Revert "spi: cadence-qspi: Remove cdns, is-dma property handling"   Michal Simek
  • [PATCH] Revert "spi: cadence-qspi: Remove cdns,is-dma property handling"   Tom Rini
  • [PATCH] Revert "spi: cadence-qspi: Remove cdns, is-dma property handling"   Tom Rini
• [PATCH v3] Altera SoCFpga Boot Stall Fix   Brian Sune
  • [PATCH v3] Altera SoCFpga Boot Stall Fix   Fabio Estevam
    • [PATCH v3] Altera SoCFpga Boot Stall Fix   Sune Brian
• [PATCH v4] Altera SoCFpga Boot Stall Fix   Brian Sune
• [PATCH] sunxi: a523: Re-use H6/H616 DRAM size detection method   Andre Przywara
  • [PATCH] sunxi: a523: Re-use H6/H616 DRAM size detection method   Jernej Škrabec
  • [PATCH] sunxi: a523: Re-use H6/H616 DRAM size detection method   Chen-Yu Tsai
• [PATCH] .mailmap: update email address for Chen-Yu Tsai   Chen-Yu Tsai
  • [PATCH] .mailmap: update email address for Chen-Yu Tsai   Jernej Škrabec
  • [PATCH] .mailmap: update email address for Chen-Yu Tsai   Tom Rini
• [PATCH] sunxi: a523: Add OrangePi 4A defconfig   Chen-Yu Tsai
  • [PATCH] sunxi: a523: Add OrangePi 4A defconfig   Andre Przywara
• [PATCH 0/2] Minor fixes for QCOM sc7180 soc   George Chan via B4 Relay
• [PATCH 1/2] iommu: qcom-smmu: Introduce sc7180 compatible string   George Chan via B4 Relay
• [PATCH 2/2] usb: gadget: Introduce usb gadget vendor/product default id for ARCH_QCOM   George Chan via B4 Relay
• [PATCH] boot: bootmeth_android: Conditionally dependent on abootimg   George Chan via B4 Relay
  • [PATCH] boot: bootmeth_android: Conditionally dependent on abootimg   Mattijs Korpershoek
• Zynqmp: SPL loads from jtag but it gets stuck when run from SD   Álvaro G. M.
• [PATCH 1/1] Makefile: pass KEYDIR when set to sunxi-spl.bin mkimage   Andre Przywara
• [PATCH v2 2/2] configs: add support for NetCube Systems Kumquat   Andre Przywara
• [PATCH] drivers: net: dm9000 recv in stick package   xslynin
• [PATCH] tools: sunxi-spl-image-builder: support H6/H616 NAND boot   Richard Genoud
• [PATCH] Makefile: pass KEYDIR when set to sunxi-spl.bin mkimage   Richard Genoud
• [PATCH v2] Makefile: pass KEYDIR when set to sunxi-spl.bin mkimage   Richard Genoud
  • [PATCH v2] Makefile: pass KEYDIR when set to sunxi-spl.bin mkimage   Andre Przywara
• [PATCH v2] tools: sunxi-spl-image-builder: support H6/H616 NAND boot   Richard Genoud
  • [PATCH v2] tools: sunxi-spl-image-builder: support H6/H616 NAND boot   Michael Nazzareno Trimarchi
    • [PATCH v2] tools: sunxi-spl-image-builder: support H6/H616 NAND boot   Richard GENOUD
• [RFC 03/10] eeprom: starfive: Simplify get_ddr_size_from_eeprom()   Hal Feng
  • [RFC 03/10] eeprom: starfive: Simplify get_ddr_size_from_eeprom()   E Shattow
• [PATCH v2 02/11] sunxi: Split V3 and V3s support with a common option   Andre Przywara
• [PATCH v2] gpio: s5p: increment bank base address only if bank is initialized   Kaustabh Chakraborty
• [PATCH v4] bootstd: make it possible to use tftp for netboot with standardboot   Benjamin Hahn
  • [PATCH v4] bootstd: make it possible to use tftp for netboot with standardboot   Jerome Forissier
  • [PATCH v4] bootstd: make it possible to use tftp for netboot with standardboot   Tom Rini
• [PATCH 1/2] clk: at91: Add ACR in all PLL setting.   Eugen Hristev
• [PATCH v5 0/5] Enable Firmware Handoff CI test on qemu_arm64   Raymond Mao
  • [PATCH v5 1/5] docker: add OP-TEE and TF-A build for testing Firmware Handoff   Raymond Mao
    • [PATCH v5 1/5] docker: add OP-TEE and TF-A build for testing Firmware Handoff   Tom Rini
  • [PATCH v5 2/5] pytest: add test script to validate Firmware Handoff   Raymond Mao
  • [PATCH v5 3/5] configs: select CMD_BLOBLIST for Firmware Handoff testing   Raymond Mao
  • [PATCH v5 4/5] ci: check existence of bl1 and fip in the test script   Raymond Mao
  • [PATCH v5 5/5] ci: add test entries for qemu_arm64_tfa_fw_handoff   Raymond Mao
• [PATCH 0/6] clk: Fix some error detection   Andrew Goodbody
  • [PATCH 1/6] mmc: hi6220_dw_mmc: Fix error detection for clk_get_rate   Andrew Goodbody
  • [PATCH 2/6] mmc: fsl_esdhc_imx: Cannot test unsigned to be < 0   Andrew Goodbody
  • [PATCH 3/6] clk: microchip: mpfs: Fix error detection   Andrew Goodbody
    • [PATCH 3/6] clk: microchip: mpfs: Fix error detection   Conor Dooley
  • [PATCH 4/6] i2c: npcm: Fix error detection   Andrew Goodbody
    • [PATCH 4/6] i2c: npcm: Fix error detection   Heiko Schocher
  • [PATCH 5/6] i2c: imx_lpi2c: Fix error detection   Andrew Goodbody
    • [PATCH 5/6] i2c: imx_lpi2c: Fix error detection   Heiko Schocher
  • [PATCH 6/6] timer: imx-gpt: Fix error detection   Andrew Goodbody
• [RESEND PATCH v5 0/5] Enable Firmware Handoff CI test on qemu_arm64   Raymond Mao
  • [RESEND PATCH v5 1/5] docker: add OP-TEE and TF-A build for testing Firmware Handoff   Raymond Mao
  • [RESEND PATCH v5 2/5] pytest: add test script to validate Firmware Handoff   Raymond Mao
  • [RESEND PATCH v5 3/5] configs: select CMD_BLOBLIST for Firmware Handoff testing   Raymond Mao
  • [RESEND PATCH v5 4/5] ci: check existence of bl1 and fip in the test script   Raymond Mao
  • [RESEND PATCH v5 5/5] ci: add test entries for qemu_arm64_tfa_fw_handoff   Raymond Mao
• [PATCH 0/3] doc: Add a general note about $?   Tom Rini
  • [PATCH 1/3] doc: usage: Add general rule for `$?`   Tom Rini
    • [PATCH 1/3] doc: usage: Add general rule for `$?`   Quentin Schulz
      • [PATCH 1/3] doc: usage: Add general rule for `$?`   Tom Rini
      • [PATCH 1/3] doc: usage: Add general rule for `$?`   Quentin Schulz
  • [PATCH 2/3] doc: askenv: Reword and remove return value   Tom Rini
    • [PATCH 2/3] doc: askenv: Reword and remove return value   Quentin Schulz
      • [PATCH 2/3] doc: askenv: Reword and remove return value   Tom Rini
      • [PATCH 2/3] doc: askenv: Reword and remove return value   Quentin Schulz
      • [PATCH 2/3] doc: askenv: Reword and remove return value   Tom Rini
  • [PATCH 3/3] doc: seama: Reword return value section   Tom Rini
    • [PATCH 3/3] doc: seama: Reword return value section   Quentin Schulz
      • [PATCH 3/3] doc: seama: Reword return value section   Tom Rini
      • [PATCH 3/3] doc: seama: Reword return value section   Quentin Schulz
• [PATCH] env: Invert gd->env_valid for env_mmc_save   Tom Rini
• [PATCH] env: fat, ubi: Fix gd->env_valid for the first write   Tom Rini
  • [PATCH] env: fat, ubi: Fix gd->env_valid for the first write   Tom Rini
• [PATCH] mmc: sd: Handle UHS-I voltage signaling without power cycle   Tanmay Kathpalia
  • [PATCH] mmc: sd: Handle UHS-I voltage signaling without power cycle   Peng Fan
    • [PATCH] mmc: sd: Handle UHS-I voltage signaling without power cycle   Tanmay Kathpalia
  • [PATCH] mmc: sd: Handle UHS-I voltage signaling without power cycle   Peng Fan (OSS)
• [PATCH] riscv: dts: starfive: prune redundant jh7110 overrides   E Shattow
• [PATCH] sdhci: Reorder interrupt flags in SDHCI_INT_DATA_MASK definition   Tanmay Kathpalia
  • [PATCH] sdhci: Reorder interrupt flags in SDHCI_INT_DATA_MASK definition   Peng Fan
  • [PATCH] sdhci: Reorder interrupt flags in SDHCI_INT_DATA_MASK definition   Peng Fan (OSS)
• [PATCH v2 0/3] Add upstream boards Milk-V Mars CM and Mars CM Lite   E Shattow
  • [PATCH v2 1/3] board: starfive: visionfive2: Add Milk-V Mars CM and Mars CM Lite selection by product_id   E Shattow
    • [PATCH v2 1/3] board: starfive: visionfive2: Add Milk-V Mars CM and Mars CM Lite selection by product_id   Hal Feng
  • [PATCH v2 2/3] configs: starfive: Add Milk-V Mars CM and Mars CM Lite to visionfive2   E Shattow
    • [PATCH v2 2/3] configs: starfive: Add Milk-V Mars CM and Mars CM Lite to visionfive2   Hal Feng
  • [PATCH v2 3/3] board: starfive: Add initial Milk-V Mars CM and Mars CM Lite user documentation   E Shattow
• [PATCH] sunxi: dram: detect non-power-of-2 sized DRAM chips   Andre Przywara
  • [PATCH] sunxi: dram: detect non-power-of-2 sized DRAM chips   Jernej Škrabec
    • [PATCH] sunxi: dram: detect non-power-of-2 sized DRAM chips   Andre Przywara
      • [PATCH] sunxi: dram: detect non-power-of-2 sized DRAM chips   Jernej Škrabec
• [PATCH v3 00/12] remoteproc: Add support for i.MX8M[M/N/P/Q] and i.MX93   Peng Fan
  • [PATCH v3 01/12] remoteproc: Extend device_to_virt with a is_iomem parameter   Peng Fan
  • [PATCH v3 02/12] remoteproc: Add imx_rproc driver to support NXP i.MX8MP/N   Peng Fan
  • [PATCH v3 03/12] remoteproc: imx_rproc: Support i.MX8MQ/M   Peng Fan
  • [PATCH v3 04/12] remoteproc: imx_rproc: Add support for i.MX93 CM33   Peng Fan
  • [PATCH v3 05/12] arm: dts: imx8m: Add remoteproc node   Peng Fan
  • [PATCH v3 06/12] imx8mp: Enable remoteproc for i.MX8MP EVK   Peng Fan
  • [PATCH v3 07/12] imx8mm: Enable remoteproc for i.MX8MM EVK   Peng Fan
  • [PATCH v3 08/12] imx8mn: Enable remoteproc for i.MX8MN EVK   Peng Fan
  • [PATCH v3 09/12] imx8mq: Enable remoteproc for i.MX8MQ EVK   Peng Fan
  • [PATCH v3 10/12] imx93: Enable remoteproc for i.MX93-EVK/QSB/FRDM   Peng Fan
  • [PATCH v3 11/12] doc: board: nxp: Add remoteproc guide   Peng Fan
  • [PATCH v3 12/12] doc: cmd: Document remoteproc usage   Peng Fan
  • [PATCH v3 00/12] remoteproc: Add support for i.MX8M[M/N/P/Q] and i.MX93   Fabio Estevam
    • [PATCH v3 00/12] remoteproc: Add support for i.MX8M[M/N/P/Q] and i.MX93   Peng Fan
      • [PATCH v3 00/12] remoteproc: Add support for i.MX8M[M/N/P/Q] and i.MX93   Peng Fan
      • [PATCH v3 00/12] remoteproc: Add support for i.MX8M[M/N/P/Q] and i.MX93   Tom Rini
• [RFC 04/10] eeprom: starfive: Correct get_pcb_revision_from_eeprom()   Hal Feng
  • [RFC 04/10] eeprom: starfive: Correct get_pcb_revision_from_eeprom()   Hal Feng
• [RFC 05/10] eeprom: starfive: Update eeprom data format version to 3   Hal Feng
• [RFC 06/10] pcie: starfive: Add a optional power gpio support   Hal Feng
• [PATCH v5 00/24] Introduce Firmware Update Support for Arm PSA   Sughosh Ganu
• [RFC 08/10] configs: visionfive2: Add VisionFive 2 Lite DT to OF_LIST   Hal Feng
• [PULL] u-boot-at91-2026.01-a   Eugen Hristev
  • [PULL] u-boot-at91-2026.01-a   Tom Rini
• [PATCH 0/8] Add support for TI AM6254atl SiP   Anshul Dalal
  • [PATCH 1/8] arm64: dts: ti: k3-am6*-boards: Add label to reserved-memory node   Anshul Dalal
  • [PATCH 2/8] arm64: dts: ti: k3-am62*: remove SoC dtsi from common dtsi   Anshul Dalal
  • [PATCH 3/8] arm64: dts: ti: Introduce base support for AM6254atl SiP   Anshul Dalal
  • [PATCH 4/8] arm64: dts: ti: Add support for AM6254atl SiP SK   Anshul Dalal
  • [PATCH 5/8] arm: dts: add support for am6254atl at R5 SPL   Anshul Dalal
  • [PATCH 6/8] configs: add defconfigs for am6254atl   Anshul Dalal
    • [PATCH 6/8] configs: add defconfigs for am6254atl   Bryan Brattlof
      • [PATCH 6/8] configs: add defconfigs for am6254atl   Anshul Dalal
  • [PATCH 7/8] board: am62x: add env file for am6254atl   Anshul Dalal
    • [PATCH 7/8] board: am62x: add env file for am6254atl   Bryan Brattlof
  • [PATCH 8/8] doc: add documentation for am6254atl SiP   Anshul Dalal
    • [PATCH 8/8] doc: add documentation for am6254atl SiP   Bryan Brattlof
• [RFC 01/10] riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts   E Shattow
  • [RFC 01/10] riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts   Hal Feng
• [PATCH] makefile: Fix recursive makes   Ilias Apalodimas
  • [PATCH] makefile: Fix recursive makes   Heinrich Schuchardt
  • [PATCH] makefile: Fix recursive makes   Tom Rini
• [PATCH] arm64: renesas: Clean up default boot command   Marek Vasut
• [PATCH] doc: pytest: Complete dependencies list with missing packages   Kory Maincent
  • [PATCH] doc: pytest: Complete dependencies list with missing packages   Mattijs Korpershoek
    • [PATCH] doc: pytest: Complete dependencies list with missing packages   Kory Maincent
      • [PATCH] doc: pytest: Complete dependencies list with missing packages   Mattijs Korpershoek
      • [PATCH] doc: pytest: Complete dependencies list with missing packages   Heinrich Schuchardt
• [PATCH v2 5/5] net: airoha: bind MDIO controller on Ethernet load   Jerome Forissier
• Please pull net-20251022   Jerome Forissier
  • Please pull net-20251022   Tom Rini
• [PATCH v4 00/20] Convert extension support to UCLASS and adds its support to boot flows   Kory Maincent (TI.com)
  • [PATCH v4 01/20] MAINTAINERS: Add maintainer for extension board support   Kory Maincent (TI.com)
  • [PATCH v4 02/20] board: ti: Exclude cape detection from XPL builds   Kory Maincent (TI.com)
    • [PATCH v4 02/20] board: ti: Exclude cape detection from XPL builds   Tom Rini
  • [PATCH v4 03/20] board: ti: Fix CAPE_EEPROM_BUS_NUM Kconfig dependency   Kory Maincent (TI.com)
  • [PATCH v4 04/20] board: sunxi: Exclude DIP detection from XPL builds   Kory Maincent (TI.com)
  • [PATCH v4 05/20] board: compulab: Exclude compulab extension board detection from XPL builds   Kory Maincent (TI.com)
  • [PATCH v4 06/20] include: extension_board: Document the extension structure   Kory Maincent (TI.com)
  • [PATCH v4 07/20] boot: Move extension board support from cmd/ to boot/   Kory Maincent (TI.com)
  • [PATCH v4 08/20] boot: Add UCLASS support for extension boards   Kory Maincent (TI.com)
    • [PATCH v4 08/20] boot: Add UCLASS support for extension boards   Kory Maincent
  • [PATCH v4 09/20] board: ti: Refactor cape detection code for readability   Kory Maincent (TI.com)
  • [PATCH v4 10/20] board: ti: Convert cape detection to use UCLASS framework   Kory Maincent (TI.com)
  • [PATCH v4 11/20] board: sunxi: Refactor CHIP board extension code   Kory Maincent (TI.com)
  • [PATCH v4 12/20] board: sunxi: Convert extension support to UCLASS framework   Kory Maincent (TI.com)
  • [PATCH v4 13/20] board: sandbox: Improve extension board scan implementation   Kory Maincent (TI.com)
  • [PATCH v4 14/20] board: sandbox: Convert extension support to UCLASS framework   Kory Maincent (TI.com)
    • [PATCH v4 14/20] board: sandbox: Convert extension support to UCLASS framework   Kory Maincent
  • [PATCH v4 15/20] board: compulab: Convert imx8mm-cl-iot-gate to UCLASS extension framework   Kory Maincent (TI.com)
  • [PATCH v4 16/20] boot: Remove legacy extension board support   Kory Maincent (TI.com)
  • [PATCH v4 17/20] boot: extension: Move overlay apply custom logic to command level   Kory Maincent (TI.com)
  • [PATCH v4 18/20] boot: pxe_utils: Add extension board devicetree overlay support   Kory Maincent (TI.com)
  • [PATCH v4 19/20] boot: bootmeth_efi: Refactor distro_efi_try_bootflow_files return logic   Kory Maincent (TI.com)
  • [PATCH v4 20/20] boot: bootmeth_efi: Add extension board devicetree overlay support   Kory Maincent (TI.com)
  • [PATCH v4 00/20] Convert extension support to UCLASS and adds its support to boot flows   Tom Rini
    • [PATCH v4 00/20] Convert extension support to UCLASS and adds its support to boot flows   Kory Maincent
      • [PATCH v4 00/20] Convert extension support to UCLASS and adds its support to boot flows   Tom Rini
• [PATCH] test: py: Add pyelftools dependency for test_event_dump   Kory Maincent
  • [PATCH] test: py: Add pyelftools dependency for test_event_dump   Tom Rini
    • [PATCH] test: py: Add pyelftools dependency for test_event_dump   Kory Maincent
• [PATCH v3] armv8: implement workaround for broken CNTFRQ_EL0 value   Kaustabh Chakraborty
• U-Boot Not Working on Raspberry Pi 5   Mikeyy M
  • U-Boot Not Working on Raspberry Pi 5   Peter Robinson
    • U-Boot Not Working on Raspberry Pi 5   Mikeyy M
      • U-Boot Not Working on Raspberry Pi 5   Mikeyy M
• [PATCH] power: regulator: Remove duplicate include of regulator_common.h   Tanmay Kathpalia
  • [PATCH] power: regulator: Remove duplicate include of regulator_common.h   Peng Fan
  • [PATCH] power: regulator: Remove duplicate include of regulator_common.h   Peng Fan (OSS)
• [PATCH] mmc: sdhci: Add SDHCI_SPEC_400, _410, and _420 version defines   Tanmay Kathpalia
  • [PATCH] mmc: sdhci: Add SDHCI_SPEC_400, _410, and _420 version defines   Peng Fan
    • [PATCH] mmc: sdhci: Add SDHCI_SPEC_400, _410, and _420 version defines   Tanmay Kathpalia
      • [PATCH] mmc: sdhci: Add SDHCI_SPEC_400, _410, and _420 version defines   Peng Fan
• [PATCH v4] spl: Add support for Device Firmware Upgrade (DFU) over PCIe   Hrushikesh Salunke
• [PATCH] liebherr: btt: shrink spl_board_init   Rasmus Villemoes
  • [PATCH] liebherr: btt: shrink spl_board_init   Fabio Estevam
• [PATCH v1] configs: agilex5: Enable FAT-based environment storage in defconfig   alif.zakuan.yuslaimi at altera.com
• [PATCH v1 0/6] remoteproc: k3-r5: Build fixes and security improvements   Philippe Schenker
  • [PATCH v1 1/6] arm: dts: k3-am642-evm: Remove duplicate node   Philippe Schenker
  • [PATCH v1 2/6] remoteproc: k3-r5: cast size to size_t   Philippe Schenker
    • [PATCH v1 2/6] remoteproc: k3-r5: cast size to size_t   Andrew Davis
  • [PATCH v1 3/6] soc: ti: pruss: Fix size ptr type in probe   Philippe Schenker
  • [PATCH v1 4/6] mach-k3: security: Propagate verified image addr   Philippe Schenker
    • [PATCH v1 4/6] mach-k3: security: Propagate verified image addr   Andrew Davis
  • [PATCH v1 5/6] remoteproc: k3-r5: Use verified image address   Philippe Schenker
  • [PATCH v1 6/6] remoteproc: k3-r5: Implement is_running operation   Philippe Schenker
• [PATCH 0/4] Add PCIe Endpoint controller support for TI J784S4 SoC   Hrushikesh Salunke
  • [PATCH 1/4] pci_endpoint: pci_cdns_ti_ep: Add delay after power domain reset   Hrushikesh Salunke
  • [PATCH 2/4] pci_endpoint: pci_cdns_ti_ep: Add SERDES mux configuration support   Hrushikesh Salunke
  • [PATCH 3/4] pci_endpoint: pci_cdns_ti_ep: Enable PCIe Endpoint mode in J784S4 SoC   Hrushikesh Salunke
  • [PATCH 4/4] configs: j784s4_evm_a72_defconfig: Enable configs for PCI Endpoint mode   Hrushikesh Salunke
• [PATCH] mmc: exynos_dw_mmc: guard execute_tuning   Peng Fan (OSS)
• [PATCH] binman: fix mkmbn integration and tests   Casey Connolly
  • [PATCH] binman: fix mkmbn integration and tests   Casey Connolly
    • [PATCH] binman: fix mkmbn integration and tests   neil.armstrong at linaro.org
• [PATCH RESEND] binman: fix mkmbn integration and tests   Casey Connolly
  • [PATCH RESEND] binman: fix mkmbn integration and tests   Neil Armstrong
    • [PATCH RESEND] binman: fix mkmbn integration and tests   Casey Connolly
• [PATCH 0/2] eficonfig: improve handling boot entry optional data   Casey Connolly
  • [PATCH 1/2] efi_loader: efi_console: support editable input fields   Casey Connolly
    • [PATCH 1/2] efi_loader: efi_console: support editable input fields   Ilias Apalodimas
  • [PATCH 2/2] efi_loader: efi_console: jump to prev/next word with ctrl+arrow   Casey Connolly
    • [PATCH 2/2] efi_loader: efi_console: jump to prev/next word with ctrl+arrow   Ilias Apalodimas
    • [PATCH 2/2] efi_loader: efi_console: jump to prev/next word with ctrl+arrow   Heinrich Schuchardt
• [PATCH v3] net: airoha: bind MDIO controller on Ethernet load   Christian Marangi
• [PATCH] python: Add a top-level requirements.txt file   Tom Rini
  • [PATCH] python: Add a top-level requirements.txt file   Heinrich Schuchardt
    • [PATCH] python: Add a top-level requirements.txt file   Tom Rini
• [PATCH] bus: ti-sysc: select CLK driver   yegorslists at googlemail.com
• [PATCH] ARM: dts: stm32: Fix STM32MP15xx DHSOM boot breakage due to ETZPC   Marek Vasut
  • [PATCH] ARM: dts: stm32: Fix STM32MP15xx DHSOM boot breakage due to ETZPC   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Keep the reg11 and reg18 regulators always enabled on STM32MP13xx DHCOR   Marek Vasut
  • [PATCH] ARM: dts: stm32: Keep the reg11 and reg18 regulators always enabled on STM32MP13xx DHCOR   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Introduce DH STM32MP13x target   Marek Vasut
  • [PATCH] ARM: dts: stm32: Introduce DH STM32MP13x target   Patrice CHOTARD
• [PATCH 1/3] board: dhelectronics: Move dh_add_item_number_and_serial_to_env() to common code   Marek Vasut
  • [PATCH 2/3] ARM: stm32: Read values from M24256 write-lockable page on STM32MP13xx DHCOR   Marek Vasut
    • [PATCH 2/3] ARM: stm32: Read values from M24256 write-lockable page on STM32MP13xx DHCOR   Patrice CHOTARD
  • [PATCH 3/3] ARM: stm32: Add MAC address readout from fuses on DH STM32MP1 DHSOM   Marek Vasut
    • [PATCH 3/3] ARM: stm32: Add MAC address readout from fuses on DH STM32MP1 DHSOM   Patrice CHOTARD
  • [PATCH 1/3] board: dhelectronics: Move dh_add_item_number_and_serial_to_env() to common code   Patrice CHOTARD
• [PATCH] net: phy: dp83869: Update STRAP_OPMODE bitmask   Marek Vasut
• Regression caused by "arm64: Reduce PT size estimation complexity"   Shawn Guo
• [PATCH v1] arm: imx8: select ARCH_MISC_INIT if FSL_CAAM is enabled   Emanuele Ghidoli
  • [PATCH v1] arm: imx8: select ARCH_MISC_INIT if FSL_CAAM is enabled   Peng Fan
  • [PATCH v1] arm: imx8: select ARCH_MISC_INIT if FSL_CAAM is enabled   Fabio Estevam
• [PATCH v8 0/2] Remove usage of CMD_BOOTx from SPL code   Anshul Dalal
  • [PATCH v8 1/2] spl: remove usage of CMD_BOOTx from image parsing   Anshul Dalal
    • [PATCH v8 1/2] spl: remove usage of CMD_BOOTx from image parsing   Tom Rini
  • [PATCH v8 2/2] configs: disable SPL_BOOTZ to preserve spl size   Anshul Dalal
• [PATCH v3 0/4] Allow falcon boot from A-core SPL on K3 devices   Anshul Dalal
  • [PATCH v3 1/4] spl: Kconfig: allow falcon mode for TI secure devices   Anshul Dalal
  • [PATCH v3 2/4] board: ti: common: Kconfig: add CMD_SPL   Anshul Dalal
  • [PATCH v3 3/4] arm: mach-k3: enable support for falcon mode   Anshul Dalal
  • [PATCH v3 4/4] doc: develop: add docs for secure falcon mode   Anshul Dalal
• [PATCH v2 0/8] Add support for TI AM6254atl SiP   Anshul Dalal
  • [PATCH v2 1/8] arm64: dts: ti: k3-am6*-boards: Add label to reserved-memory node   Anshul Dalal
  • [PATCH v2 2/8] arm64: dts: ti: k3-am62*: remove SoC dtsi from common dtsi   Anshul Dalal
  • [PATCH v2 3/8] arm64: dts: ti: Introduce base support for AM6254atl SiP   Anshul Dalal
  • [PATCH v2 4/8] arm64: dts: ti: Add support for AM6254atl SiP SK   Anshul Dalal
  • [PATCH v2 5/8] arm: dts: add support for AM6254atl at R5 SPL   Anshul Dalal
  • [PATCH v2 6/8] configs: add defconfigs for AM6254atl   Anshul Dalal
  • [PATCH v2 7/8] board: am62x: add env file for AM6254atl   Anshul Dalal
  • [PATCH v2 8/8] doc: add documentation for AM6254atl SiP   Anshul Dalal
  • [PATCH v2 0/8] Add support for TI AM6254atl SiP   Tom Rini
• [PATCH] doc: board: starfive: update jh7110 common description   E Shattow
  • [PATCH] doc: board: starfive: update jh7110 common description   E Shattow
  • [PATCH] doc: board: starfive: update jh7110 common description   Heinrich Schuchardt
    • [PATCH] doc: board: starfive: update jh7110 common description   E Shattow
      • [PATCH] doc: board: starfive: update jh7110 common description   Heinrich Schuchardt
• [PATCH v1 0/9] Add support for StarFive VisionFive 2 Lite board   Hal Feng
  • [PATCH v1 1/9] riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts   Hal Feng
  • [PATCH v1 2/9] riscv: dts: starfive: Add VisionFive 2 Lite board device tree   Hal Feng
  • [PATCH v1 3/9] eeprom: starfive: Simplify get_ddr_size_from_eeprom()   Hal Feng
  • [PATCH v1 4/9] eeprom: starfive: Correct get_pcb_revision_from_eeprom()   Hal Feng
  • [PATCH v1 5/9] eeprom: starfive: Support eeprom data format v3   Hal Feng
  • [PATCH v1 6/9] pcie: starfive: Add a optional power gpio support   Hal Feng
  • [PATCH v1 7/9] configs: visionfive2: Add VisionFive 2 Lite DT to OF_LIST   Hal Feng
  • [PATCH v1 8/9] board: starfive: spl: Support VisionFive 2 Lite   Hal Feng
  • [PATCH v1 9/9] board: starfive: visionfive2: Add VisionFive 2 Lite fdt selection   Hal Feng
• mx6ull: init_bandgap regression   Sven
  • mx6ull: init_bandgap regression   Fabio Estevam
    • mx6ull: init_bandgap regression   Ye Li
      • mx6ull: init_bandgap regression   Fabio Estevam
• [PATCH V2] mmc: exynos_dw_mmc: guard execute_tuning   Peng Fan (OSS)
  • [PATCH V2] mmc: exynos_dw_mmc: guard execute_tuning   Kaustabh Chakraborty
• [PATCH v1 2/9] riscv: dts: starfive: Add VisionFive 2 Lite board device tree   E Shattow
  • [PATCH v1 2/9] riscv: dts: starfive: Add VisionFive 2 Lite board device tree   Hal Feng
• [PATCH v1 1/9] riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts   E Shattow
• [PATCH v1 3/9] eeprom: starfive: Simplify get_ddr_size_from_eeprom()   E Shattow
• [PATCH v1 4/9] eeprom: starfive: Correct get_pcb_revision_from_eeprom()   E Shattow
• [PATCH v1 5/9] eeprom: starfive: Support eeprom data format v3   E Shattow
• [PATCH] gpio: Return -ENODEV if gpio_hog_lookup_name() is empty   Wolfgang Wallner
  • [PATCH] gpio: Return -ENODEV if gpio_hog_lookup_name() is empty   Heiko Schocher
• [PATCH v1 6/9] pcie: starfive: Add a optional power gpio support   E Shattow
  • [PATCH v1 6/9] pcie: starfive: Add a optional power gpio support   Hal Feng
• [PATCH v2 0/4] board: ti: am62x: Add EEPROM support and refactor board detection   Guillaume La Roque (TI.com)
  • [PATCH v2 1/4] board: ti: common: Add generic AM6x board detection functions   Guillaume La Roque (TI.com)
    • [PATCH v2 1/4] board: ti: common: Add generic AM6x board detection functions   Mattijs Korpershoek
  • [PATCH v2 2/4] board: am62x: Add support for reading eeprom data   Guillaume La Roque (TI.com)
    • [PATCH v2 2/4] board: am62x: Add support for reading eeprom data   Mattijs Korpershoek
    • [PATCH v2 2/4] board: am62x: Add support for reading eeprom data   Andrew Davis
  • [PATCH v2 3/4] board: am64x: Use generic AM6x board detection functions   Guillaume La Roque (TI.com)
    • [PATCH v2 3/4] board: am64x: Use generic AM6x board detection functions   Mattijs Korpershoek
  • [PATCH v2 4/4] board: am65x: Use generic AM6x board detection function   Guillaume La Roque (TI.com)
    • [PATCH v2 4/4] board: am65x: Use generic AM6x board detection function   Mattijs Korpershoek
• [PATCH] bootstd: android: add the bootargs env to the commandline   Guillaume La Roque (TI.com)
• [PATCH 0/9] Fix various typos, wording or whitespace errors   Wolfgang Wallner
  • [PATCH 1/9] doc: develop: Fix typos in binman/binman.rst   Wolfgang Wallner
    • [PATCH 1/9] doc: develop: Fix typos in binman/binman.rst   Simon Glass
  • [PATCH 2/9] doc: develop: Change formatting to make binman doc more readable   Wolfgang Wallner
    • [PATCH 2/9] doc: develop: Change formatting to make binman doc more readable   Simon Glass
  • [PATCH 3/9] doc: Fix typos   Wolfgang Wallner
    • [PATCH 3/9] doc: Fix typos   E Shattow
  • [PATCH 4/9] boot: kconfig: Fix typos   Wolfgang Wallner
    • [PATCH 4/9] boot: kconfig: Fix typos   Simon Glass
    • [PATCH 4/9] boot: kconfig: Fix typos   Mattijs Korpershoek
  • [PATCH 5/9] image: Fix typos in image.h   Wolfgang Wallner
    • [PATCH 5/9] image: Fix typos in image.h   Simon Glass
    • [PATCH 5/9] image: Fix typos in image.h   Mattijs Korpershoek
  • [PATCH 6/9] bootm: Fix typo in bootm.h   Wolfgang Wallner
    • [PATCH 6/9] bootm: Fix typo in bootm.h   Simon Glass
  • [PATCH 7/9] boot: Fix typo   Wolfgang Wallner
    • [PATCH 7/9] boot: Fix typo   Simon Glass
  • [PATCH 8/9] doc: Fix whitespace in devicetree example in overlay-fdt-boot.rst   Wolfgang Wallner
  • [PATCH 9/9] doc: develop: virtio: Fix qemu example (true/false -> on/off)   Wolfgang Wallner
• [PATCH v2 0/3] doc: Add a general note about $?   Tom Rini
  • [PATCH v2 1/3] doc: usage: Add general rule for `$?`   Tom Rini
    • [PATCH v2 1/3] doc: usage: Add general rule for `$?`   Quentin Schulz
      • [PATCH v2 1/3] doc: usage: Add general rule for `$?`   Tom Rini
      • [PATCH v2 1/3] doc: usage: Add general rule for `$?`   Quentin Schulz
  • [PATCH v2 2/3] doc: askenv: Reword and remove return value   Tom Rini
    • [PATCH v2 2/3] doc: askenv: Reword and remove return value   Quentin Schulz
  • [PATCH v2 3/3] doc: seama: Reword return value section   Tom Rini
    • [PATCH v2 3/3] doc: seama: Reword return value section   Quentin Schulz
      • [PATCH v2 3/3] doc: seama: Reword return value section   Tom Rini
• [PATCH 1/2] doc: usage: Use glob for all commands   Tom Rini
  • [PATCH 2/2] doc/usage: Add a reference to General rules for commands   Tom Rini
  • [PATCH 1/2] doc: usage: Use glob for all commands   Quentin Schulz
• [PATCH] test/py: multiplexed_log.py: Clean up and correct RunAndLog()   Tom Rini
• [PATCH v2 0/3] Support for a generic platform for all Exynos mobile devices   Kaustabh Chakraborty
  • [PATCH v2 1/3] board: samsung: add support for Samsung Exynos mobile device boards   Kaustabh Chakraborty
  • [PATCH v2 2/3] board: samsung: exynos-mobile: add exynos7870 support and three devices   Kaustabh Chakraborty
  • [PATCH v2 3/3] doc: samsung: exynos-mobile: add documentation for exynos7870   Kaustabh Chakraborty
• [PATCH v3 0/5] Add support for TI AM6254atl SiP   Anshul Dalal
  • [PATCH v3 1/5] arm64: dts: ti: k3-am6*-boards: Add label to reserved-memory node   Anshul Dalal
  • [PATCH v3 2/5] arm64: dts: ti: k3-am62*: remove SoC dtsi from common dtsi   Anshul Dalal
  • [PATCH v3 3/5] arm64: dts: ti: Introduce base support for AM6254atl SiP   Anshul Dalal
  • [PATCH v3 4/5] arm64: dts: ti: Add support for AM6254atl SiP SK   Anshul Dalal
  • [PATCH v3 5/5] ti: add support for AM6254atl SiP   Anshul Dalal
• [PATCH v9 0/2] Remove usage of CMD_BOOTx from SPL code   Anshul Dalal
  • [PATCH v9 1/2] spl: remove usage of CMD_BOOTx from image parsing   Anshul Dalal
    • [PATCH v9 1/2] spl: remove usage of CMD_BOOTx from image parsing   Tom Rini
      • [PATCH v9 1/2] spl: remove usage of CMD_BOOTx from image parsing   Anshul Dalal
  • [PATCH v9 2/2] configs: disable SPL_BOOTZ to preserve spl size   Anshul Dalal
• [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Marek Vasut
  • 回复: [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Alice Guo (OSS)
    • Re: 回复: [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Marek Vasut
      • 回复: 回复: [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Alice Guo (OSS)
      • Re: 回复: 回复: [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Marek Vasut
      • 回复: 回复: 回复: [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Alice Guo (OSS)
      • Re: 回复: 回复: 回复: [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Marek Vasut
  • [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Peng Fan
    • [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Marek Vasut
      • [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Marek Vasut
      • [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Anshul Dalal
      • [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Bryan Brattlof
      • [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Marek Vasut
• [PATCH] firmware: scmi: Fix up code comments   Marek Vasut
  • 回复: [PATCH] firmware: scmi: Fix up code comments   Alice Guo (OSS)
    • Re: 回复: [PATCH] firmware: scmi: Fix up code comments   Marek Vasut
• [PATCH] firmware: scmi: Add clock v3.2 CONFIG_SET support   Marek Vasut
• [PATCH 0/6] mmc: exynos_dw_mmc: Disable FMP for Exynos850   Sam Protsenko
  • [PATCH 1/6] mmc: exynos_dw_mmc: Extend dm_dwmci_ops without code duplication   Sam Protsenko
    • [PATCH 1/6] mmc: exynos_dw_mmc: Extend dm_dwmci_ops without code duplication   Anand Moon
  • [PATCH 2/6] mmc: dw_mmc: Do not export dwmci_send_cmd() and dwmci_set_ios()   Sam Protsenko
    • [PATCH 2/6] mmc: dw_mmc: Do not export dwmci_send_cmd() and dwmci_set_ios()   Anand Moon
  • [PATCH 3/6] mmc: exynos_dw_mmc: Improve coding style   Sam Protsenko
    • [PATCH 3/6] mmc: exynos_dw_mmc: Improve coding style   Anand Moon
  • [PATCH 4/6] mmc: exynos_dw_mmc: Add quirk for disabling FMP   Sam Protsenko
    • [PATCH 4/6] mmc: exynos_dw_mmc: Add quirk for disabling FMP   Anand Moon
  • [PATCH 5/6] mmc: exynos_dw_mmc: Add exynos850 compatible   Sam Protsenko
    • [PATCH 5/6] mmc: exynos_dw_mmc: Add exynos850 compatible   Anand Moon
  • [PATCH 6/6] mmc: exynos_dw_mmc: Disable FMP for Exynos850 chip   Sam Protsenko
    • [PATCH 6/6] mmc: exynos_dw_mmc: Disable FMP for Exynos850 chip   Anand Moon
  • [PATCH 0/6] mmc: exynos_dw_mmc: Disable FMP for Exynos850   Sam Protsenko
• [PATCH 0/4] sunxi: dts: update devicetree files   Andre Przywara
  • [PATCH 1/4] sunxi: switch the Allwinner T113 SoC to OF_UPSTREAM   Andre Przywara
    • [PATCH 1/4] sunxi: switch the Allwinner T113 SoC to OF_UPSTREAM   Jernej Škrabec
  • [PATCH 2/4] sunxi: switch Allwinner A80 boards to OF_UPSTREAM   Andre Przywara
    • [PATCH 2/4] sunxi: switch Allwinner A80 boards to OF_UPSTREAM   Jernej Škrabec
  • [PATCH 3/4] sunxi: dts: arm64: update devicetree files from Linux kernel tree   Andre Przywara
  • [PATCH 4/4] sunxi: dts: arm: update devicetree files from Linux kernel tree   Andre Przywara
• [PATCH v3] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation   Lukas Schmid
  • [PATCH v3] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation   Andre Przywara
    • [PATCH v3] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation   John Watts
• Pull request efi-2026-01-rc1-2   Heinrich Schuchardt
  • Pull request efi-2026-01-rc1-2   Tom Rini
• [PATCH 1/1] net: phy: Do not do CL22 phy reset before ethernet phy driver probe   Tom Rini
  • [PATCH 1/1] net: phy: Do not do CL22 phy reset before ethernet phy driver probe   Marek Vasut
    • [PATCH 1/1] net: phy: Do not do CL22 phy reset before ethernet phy driver probe   Paul Kocialkowski
      • [PATCH 1/1] net: phy: Do not do CL22 phy reset before ethernet phy driver probe   Tom Rini
• [PATCH v2 03/18] rockchip: odroid-go2: Remove incorrect re-defined spi0 alias   Kever Yang
• [PATCH v2 04/18] rockchip: odroid-go2: Remove u-boot.dtsi props already defined   Kever Yang
• [PATCH v2 09/18] rockchip: odroid-go2: Include pinctrl for sdmmc, sfc and uart in SPL   Kever Yang
• [PATCH v2 10/18] rockchip: odroid-go2: Use power off at power plug-in event   Kever Yang
• [PATCH v2 11/18] rockchip: odroid-go2: Add support for SPI flash boot   Kever Yang
• [PATCH v2 12/18] rockchip: odroid-go2: Select board FDT from FIT in SPL   Kever Yang
  • [PATCH v2 12/18] rockchip: odroid-go2: Select board FDT from FIT in SPL   Kever Yang
• [PATCH v2 13/18] rockchip: odroid-go2: Use env from same storage FIT was loaded from   Kever Yang
• [PATCH v2 14/18] rockchip: odroid-go2: Enable RockUSB, button, LED and RNG support   Kever Yang
• [PATCH v2 15/18] rockchip: odroid-go2: Turn on the blue LED at boot   Kever Yang
• [PATCH v2 16/18] rockchip: odroid-go2: Enable more commands   Kever Yang
• [PATCH v2 17/18] rockchip: odroid-go2: Add myself as a reviewer   Kever Yang
• [PATCH v2 18/18] arm: dts: rockchip: Include OTP in U-Boot pre-reloc phase for RK3326   Kever Yang
• [PATCH] autoboot: Fix inconsistent countdown output   Sam Protsenko
  • [PATCH] autoboot: Fix inconsistent countdown output   Sam Protsenko
    • [PATCH] autoboot: Fix inconsistent countdown output   Sam Protsenko
  • [PATCH] autoboot: Fix inconsistent countdown output   Tom Rini
• [PATCH 0/5] board: samsung: e850-96: Support USB boot   Sam Protsenko
  • [PATCH 2/5] board: samsung: e850-96: Add routines for checking boot dev   Sam Protsenko
  • [PATCH 3/5] board: samsung: e850-96: Split LDFW loading and init   Sam Protsenko
  • [PATCH 4/5] board: samsung: e850-96: Add routine for loading images over USB   Sam Protsenko
  • [PATCH 5/5] board: samsung: e850-96: Load firmwares over USB on USB boot   Sam Protsenko
  • [PATCH 0/5] board: samsung: e850-96: Support USB boot   Sam Protsenko
• [PATCH 1/5] board: samsung: e850-96: Keep public functions together   Sam Protsenko
• [PATCH v2 0/5] board: samsung: e850-96: Support USB boot   Sam Protsenko
  • [PATCH v2 1/5] board: samsung: e850-96: Keep public functions together   Sam Protsenko
  • [PATCH v2 2/5] board: samsung: e850-96: Add routines for checking boot dev   Sam Protsenko
  • [PATCH v2 3/5] board: samsung: e850-96: Split LDFW loading and init   Sam Protsenko
  • [PATCH v2 4/5] board: samsung: e850-96: Add routine for loading images over USB   Sam Protsenko
  • [PATCH v2 5/5] board: samsung: e850-96: Load firmwares over USB on USB boot   Sam Protsenko
• [PATCH v2 0/1] spi: cadence: Add xSPI controller driver support   Boon Khai Ng
  • [PATCH v2 1/1] spi: cadence: Add driver for xSPI   Boon Khai Ng
• [PATCH v1] board: toradex: add Toradex SMARC iMX95   Ernest Van Hoecke
  • [PATCH v1] board: toradex: add Toradex SMARC iMX95   Fabio Estevam
• [PATCH] common/spl: fix endless loop in spl_fit_append_fdt()   Michael Walle
  • [PATCH] common/spl: fix endless loop in spl_fit_append_fdt()   Tom Rini
• [PATCH v5 0/4] Added QCOM RPMH Power Domain Driver   Aswin Murugan
  • [PATCH v5 1/4] soc: qcom: cmd-db: Add cmd_db_read_slave_id() & cmd_db_read_aux_data() functions   Aswin Murugan
    • [PATCH v5 1/4] soc: qcom: cmd-db: Add cmd_db_read_slave_id() & cmd_db_read_aux_data() functions   Casey Connolly
  • [PATCH v5 2/4] power-domain: Add QCOM RPMH Power Domain Driver Support   Aswin Murugan
    • [PATCH v5 2/4] power-domain: Add QCOM RPMH Power Domain Driver Support   neil.armstrong at linaro.org
  • [PATCH v5 3/4] mach-snapdragon: fixup power-domains   Aswin Murugan
    • [PATCH v5 3/4] mach-snapdragon: fixup power-domains   neil.armstrong at linaro.org
  • [PATCH v5 4/4] configs: qcom: Add QCOM_POWER_DOMAIN config   Aswin Murugan
    • [PATCH v5 4/4] configs: qcom: Add QCOM_POWER_DOMAIN config   neil.armstrong at linaro.org
• [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Fabio Estevam
  • [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Tom Rini
  • [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Fabio Estevam
• [PATCH v8 0/8] Allow falcon boot from R5 SPL on TI's AM62 devices   Anshul Dalal
  • [PATCH v8 2/8] configs: add falcon mode fragment for k3 devices   Anshul Dalal
  • [PATCH v8 3/8] mach-k3: common: enable falcon mode from R5 SPL   Anshul Dalal
  • [PATCH v8 4/8] mach-k3: common: support only MMC in R5 falcon mode   Anshul Dalal
  • [PATCH v8 5/8] mach-k3: r5: common: add fdt fixups for falcon mode   Anshul Dalal
  • [PATCH v8 6/8] mach-k3: r5: common: add bootargs to kernel's dtb   Anshul Dalal
  • [PATCH v8 7/8] Makefile: add tifalcon.bin to CLEAN_FILES   Anshul Dalal
  • [PATCH v8 8/8] doc: ti: document R5 falcon mode for AM62 platforms   Anshul Dalal
    • [PATCH v8 8/8] doc: ti: document R5 falcon mode for AM62 platforms   Andrew Davis
      • [PATCH v8 8/8] doc: ti: document R5 falcon mode for AM62 platforms   Anshul Dalal
• [PATCH v8 1/8] arch: arm: k3-binman: add fit for falcon boot   Anshul Dalal
• [PATCH v4] i2c: add support for the MT7621 I2C controller   Justin Swartz
  • [PATCH v4] i2c: add support for the MT7621 I2C controller   Heiko Schocher
  • [PATCH v4] i2c: add support for the MT7621 I2C controller   Heiko Schocher
• [PATCH v2] firmware: scmi: Add clock v3.2 CONFIG_SET support   Marek Vasut
  • 回复: [PATCH v2] firmware: scmi: Add clock v3.2 CONFIG_SET support   Alice Guo (OSS)
• [PATCH v2] net: phy: dp83869: fix STRAP_OPMODE bitmask   Marek Vasut
• [PATCH v10 0/2] Remove usage of CMD_BOOTx from SPL code   Anshul Dalal
  • [PATCH v10 2/2] configs: disable SPL_BOOTZ to preserve spl size   Anshul Dalal
• [PATCH v10 1/2] spl: remove usage of CMD_BOOTx from image parsing   Anshul Dalal
  • [PATCH v10 1/2] spl: remove usage of CMD_BOOTx from image parsing   Tom Rini
• [GIT PULL] u-boot-sunxi/master for v2026.01   Andre Przywara
  • [GIT PULL] u-boot-sunxi/master for v2026.01   Tom Rini
• [PATCH 0/3] rockchip: more templating for binman and switch SPI image to rksd by default   Quentin Schulz
  • [PATCH 1/3] rockchip: binman: template all of simple-bin   Quentin Schulz
  • [PATCH 2/3] rockchip: make rksd the default format for SPI images   Quentin Schulz
    • [PATCH 2/3] rockchip: make rksd the default format for SPI images   Quentin Schulz
  • [PATCH 3/3] rockchip: rk3288-tinker-s: remove duplicate include   Quentin Schulz
  • [PATCH 0/3] rockchip: more templating for binman and switch SPI image to rksd by default   Simon Glass
• DE10 Nano - Booting from FPGA   Hannes
• [PATCH] clk: renesas: Introduce temporary compound clock for SCP compatibility   Marek Vasut
• [PATCH] clk: renesas: Isolate R-Car Gen3 driver to Gen3, Gen4 and RZ/G2L   Marek Vasut
• [PATCH 1/5] gpio: renesas: Drop pfc_offset parsing   Marek Vasut
  • [PATCH 2/5] gpio: renesas: Drop unused register macros   Marek Vasut
  • [PATCH 3/5] gpio: renesas: Wrap quirks in struct rcar_gpio_data   Marek Vasut
  • [PATCH 4/5] gpio: renesas: Access INDT, POSNEG, INEN registers via match data offsets   Marek Vasut
  • [PATCH 5/5] gpio: renesas: Add R-Car Gen5 support   Marek Vasut
• [PATCH] i2c: rcar_i2c: Add R-Car Gen5 support   Marek Vasut
  • [PATCH] i2c: rcar_i2c: Add R-Car Gen5 support   Heiko Schocher
    • [PATCH] i2c: rcar_i2c: Add R-Car Gen5 support   Marek Vasut
      • [PATCH] i2c: rcar_i2c: Add R-Car Gen5 support   Heiko Schocher
• [PATCH] mailbox: Allow operation without .recv callback   Marek Vasut
  • 回复: [PATCH] mailbox: Allow operation without .recv callback   Alice Guo (OSS)
• [PATCH] mailbox: renesas: Add Renesas MFIS Multifunctional Interface mailbox driver   Marek Vasut
• [PATCH] mmc: renesas-sdhi: Add R-Car Gen5 support   Marek Vasut
• [PATCH 01/12] net: rswitch: Switch indent from spaces to tabs   Marek Vasut
  • [PATCH 02/12] net: rswitch: Drop unused macros   Marek Vasut
  • [PATCH 03/12] net: rswitch: Initialize RX DMA descriptor .die_dt field to DT_FEMPTY   Marek Vasut
  • [PATCH 04/12] net: rswitch: Use bulk clock operations   Marek Vasut
  • [PATCH 05/12] net: rswitch: Add support for split MII and SerDes   Marek Vasut
  • [PATCH 06/12] net: rswitch: Parametize COMA, ETHA, GWCA offsets   Marek Vasut
  • [PATCH 07/12] net: rswitch: Parametrize port count   Marek Vasut
  • [PATCH 08/12] net: rswitch: Parametrize forwarding engine CSD register offset   Marek Vasut
  • [PATCH 09/12] net: rswitch: Inline FWRO, CARO, GWRO, TARO, RMRO macros   Marek Vasut
  • [PATCH 10/12] net: rswitch: Parametrize GWDCBAC, FWPBFCSDC, CABPIRM register offsets   Marek Vasut
  • [PATCH 11/12] net: rswitch: Parametrize MPIC_MDC_CLK_SET clock setting   Marek Vasut
  • [PATCH 12/12] net: rswitch: Add Renesas R-Car X5H Ethernet Switch3 support   Marek Vasut
• [PATCH] phy: renesas: Add PCS driver for Renesas R-Car X5H R8A78000   Marek Vasut
• [PATCH] phy: renesas: Add Multi-Protocol PHY driver for R-Car X5H   Marek Vasut
• [PATCH 1/4] pinctrl: renesas: Align Kconfig entry indent   Marek Vasut
  • [PATCH 2/4] pinctrl: renesas: Show bit position in config write   Marek Vasut
  • [PATCH 3/4] pinctrl: renesas: Move drive strength configuration into sh_pfc_soc_operations   Marek Vasut
  • [PATCH 4/4] pinctrl: renesas: Add initial R8A78000 R-Car X5H PFC tables   Marek Vasut
• [PATCH 1/6] ufs: core: Keep Makefile and Kconfig list sorted   Marek Vasut
  • [PATCH 2/6] ufs: core: Fold ufs-uclass into ufs   Marek Vasut
    • [PATCH 2/6] ufs: core: Fold ufs-uclass into ufs   Neil Armstrong
      • [PATCH 2/6] ufs: core: Fold ufs-uclass into ufs   Marek Vasut
  • [PATCH 3/6] ufs: amd-versal2: Fix indent   Marek Vasut
    • [PATCH 3/6] ufs: amd-versal2: Fix indent   Neil Armstrong
  • [PATCH 4/6] ufs: Call ufs_scsi_bind() from uclass .post_bind   Marek Vasut
    • [PATCH 4/6] ufs: Call ufs_scsi_bind() from uclass .post_bind   Neil Armstrong
  • [PATCH 5/6] ufs: renesas: Update Kconfig entry help text   Marek Vasut
    • [PATCH 5/6] ufs: renesas: Update Kconfig entry help text   Neil Armstrong
  • [PATCH 6/6] ufs: Add UFS driver for Renesas R-Car X5H   Marek Vasut
    • [PATCH 6/6] ufs: Add UFS driver for Renesas R-Car X5H   Neil Armstrong
      • [PATCH 6/6] ufs: Add UFS driver for Renesas R-Car X5H   Marek Vasut
  • [PATCH 1/6] ufs: core: Keep Makefile and Kconfig list sorted   Neil Armstrong
• [PATCH] arm64: renesas: Use BIT() macro in R-Car Gen3 header   Marek Vasut
• [PATCH] arm64: renesas: Drop encoded file name from R-Car Gen3/Gen4 header   Marek Vasut
• [PATCH] arm64: renesas: Use reset macro from common header   Marek Vasut
• [PATCH] arm64: renesas: Make CONFIG_SYS_LOAD_ADDR family-specific   Marek Vasut
• [PATCH 1/3] arm64: renesas: Add Renesas R-Car Gen5 infrastructure   Marek Vasut
  • [PATCH 2/3] arm64: dts: renesas: Add Renesas R-Car X5H R8A78000 SoC DTs   Marek Vasut
  • [PATCH 3/3] arm64: dts: renesas: Add Renesas R-Car X5H R8A78000 Ironhide board code   Marek Vasut
• [PATCH] arm64: renesas: Extend stub PSCI implementation to R-Car Gen5   Marek Vasut
• [PATCH v2] Add support for OpenSSL Provider API   Eddie Kovsky
• [PATCH] efi: video: fix mode info in payload mode   Ben Wolsieffer
• [ANN] U-Boot v2026.10-rc1 released   Tom Rini
• [PATCH V1 0/1] add new part numbers   Victor
  • [PATCH V1 1/1] mtd/spi: add new part numbers   Victor
• [PATCH] mtd: spi-nor-ids: Reformat the table   Marek Vasut
  • [PATCH] mtd: spi-nor-ids: Reformat the table   Vlim
    • [PATCH] mtd: spi-nor-ids: Reformat the table   Marek Vasut
      • [PATCH] mtd: spi-nor-ids: Reformat the table   Vlim
      • [PATCH] mtd: spi-nor-ids: Reformat the table   Marek Vasut
      • [PATCH] mtd: spi-nor-ids: Reformat the table   Vlim
      • [PATCH] mtd: spi-nor-ids: Reformat the table   Vlim
      • [PATCH] mtd: spi-nor-ids: Reformat the table   Marek Vasut
  • [PATCH] mtd: spi-nor-ids: Reformat the table   Tudor Ambarus
• [PATCH v4 00/10] Enable USB and ENETC on i.MX943 EVK   alice.guo at oss.nxp.com
  • [PATCH v4 01/10] usb: ehci-mx6: Extend support to i.MX91, i.MX93, i.MX94, and i.MX95   alice.guo at oss.nxp.com
  • [PATCH v4 02/10] arm: arch-imx9: Add USB2.0 and USB3.0 base address definitions   alice.guo at oss.nxp.com
  • [PATCH v4 03/10] imx943_evk: Enable USB 2.0 controller host mode   alice.guo at oss.nxp.com
  • [PATCH v4 04/10] Add serial# for SPL SDP download   alice.guo at oss.nxp.com
  • [PATCH v4 05/10] usb: f_sdp: Update SDP driver to support PQC container   alice.guo at oss.nxp.com
  • [PATCH v4 06/10] phy: imx8mq-usb: Add SPL support for i.MX8MQ, i.MX8MP, i.MX95, and i.MX94 USB3.0 PHY   alice.guo at oss.nxp.com
  • [PATCH v4 07/10] imx943_evk: Add support for booting from USB SDP on USB3.0   alice.guo at oss.nxp.com
  • [PATCH v4 08/10] net: fsl_enetc: Add i.MX94 support to NETC block control driver   alice.guo at oss.nxp.com
  • [PATCH v4 09/10] net: fsl_enetc_mdio: Add support for phy-supply property   alice.guo at oss.nxp.com
  • [PATCH v4 10/10] imx943_evk: Enable ENETC1 and ENETC2   alice.guo at oss.nxp.com
• [PATCH 1/4] clk: scmi: Bulk allocate all sub-driver instance data   Marek Vasut
  • [PATCH 2/4] clk: scmi: Factor out clock control flags resolution   Marek Vasut
    • [PATCH 2/4] clk: scmi: Factor out clock control flags resolution   Peng Fan
  • [PATCH 3/4] clk: scmi: Postpone clock name resolution   Marek Vasut
    • [PATCH 3/4] clk: scmi: Postpone clock name resolution   Peng Fan
      • [PATCH 3/4] clk: scmi: Postpone clock name resolution   Marek Vasut
      • [PATCH 3/4] clk: scmi: Postpone clock name resolution   Peng Fan
    • [PATCH 3/4] clk: scmi: Postpone clock name resolution   Peng Fan
  • [PATCH 4/4] clk: scmi: Defer issue of SCMI_CLOCK_ATTRIBUTES   Marek Vasut
    • [PATCH 4/4] clk: scmi: Defer issue of SCMI_CLOCK_ATTRIBUTES   Peng Fan
  • [PATCH 1/4] clk: scmi: Bulk allocate all sub-driver instance data   Peng Fan
• [PATCH v3] tools: sunxi-spl-image-builder: support H6/H616 NAND boot   Richard Genoud
  • [PATCH v3] tools: sunxi-spl-image-builder: support H6/H616 NAND boot   Miquel Raynal
• [PATCH v2 00/24] Introduce Allwinner H6/H616 NAND controller support   Richard Genoud
  • [PATCH v2 01/24] mtd: rawnand: sunxi: cosmetic: remove needless comment   Richard Genoud
  • [PATCH v2 02/24] mtd: rawnand: sunxi_spl: fix pointer from integer without a cast   Richard Genoud
  • [PATCH v2 03/24] mtd: rawnand: sunxi_spl: harmonize register defines with non spl file   Richard Genoud
  • [PATCH v2 04/24] mtd: rawnand: sunxi_spl: cosmetic: use definitions from linux/mtd/rawnand.h   Richard Genoud
  • [PATCH v2 05/24] mtd: rawnand: sunxi: remove usage of struct sunxi_ccm_reg   Richard Genoud
  • [PATCH v2 06/24] mtd: rawnand: sunxi: merge register definitions for sunxi_nand{, _spl}.c   Richard Genoud
  • [PATCH v2 07/24] mtd: rawnand: sunxi: add per SoC capabilities   Richard Genoud
  • [PATCH v2 08/24] mtd: rawnand: sunxi: move ECC_ERR_CNT register offset in SoC caps   Richard Genoud
  • [PATCH v2 09/24] mtd: rawnand: sunxi: move USER_DATA register offset in SoC caps   Richard Genoud
  • [PATCH v2 10/24] mtd: rawnand: sunxi: move ECC_PAT_FOUND register in SoC caps   Richard Genoud
  • [PATCH v2 11/24] mtd: rawnand: sunxi: add has_ecc_block_512 capability   Richard Genoud
  • [PATCH v2 12/24] mtd: rawnand: sunxi: move NFC_ECC_MODE offset in SoC caps   Richard Genoud
  • [PATCH v2 13/24] mtd: rawnand: sunxi: introduce reg_pat_id in sunxi_nfc_caps   Richard Genoud
  • [PATCH v2 14/24] mtd: rawnand: sunxi_spl: add per SoC capabilities   Richard Genoud
  • [PATCH v2 15/24] mtd: rawnand: sunxi: move NFC_RANDOM_EN register offset in SoC caps   Richard Genoud
  • [PATCH v2 16/24] mtd: rawnand: sunxi: introduce reg_spare_area in sunxi_nfc_caps   Richard Genoud
  • [PATCH v2 17/24] mtd: rawnand: sunxi_spl: use NFC_ECC_ERR_MSK and NFC_ECC_PAT_FOUND   Richard Genoud
  • [PATCH v2 18/24] mtd: rawnand: sunxi_spl: increase max_oobsize for 2KiB pages   Richard Genoud
  • [PATCH v2 19/24] mtd: rawnand: sunxi_spl: use NFC_ECC_MODE and NFC_RANDOM_SEED macros   Richard Genoud
  • [PATCH v2 20/24] sunxi: clock: H6: add NAND controller clock registers   Richard Genoud
  • [PATCH v2 21/24] clk: sunxi: Add MBUS Master Clock Gating Register   Richard Genoud
  • [PATCH v2 22/24] mtd: rawnand: sunxi: add support for H6/H616 nand controller   Richard Genoud
  • [PATCH v2 23/24] mtd: rawnand: sunxi_spl: add support for H6/H616 nand controller   Richard Genoud
  • [PATCH v2 24/24] mtd: rawnand: sunxi_spl: Fix cast to pointer from integer warnings   Richard Genoud
• [PATCH] tools: qcom: mkmbn: fix Elf constructor   Casey Connolly
  • [PATCH] tools: qcom: mkmbn: fix Elf constructor   Neil Armstrong
    • [PATCH] tools: qcom: mkmbn: fix Elf constructor   Casey Connolly
• [PATCH 1/1] CI: test qemu-riscv64_smode[_acpi]   Heinrich Schuchardt
• [PATCH v2] firmware: scmi: Fix up code comments   Marek Vasut
  • 回复: [PATCH v2] firmware: scmi: Fix up code comments   Alice Guo (OSS)
• [PATCH] ext4: include missing blk.h   Quentin Schulz
• [PATCH v2 1/7] ufs: core: Keep Makefile and Kconfig list sorted   Marek Vasut
  • [PATCH v2 2/7] ufs: core: Fold ufs-uclass into ufs   Marek Vasut
  • [PATCH v2 3/7] ufs: core: Rename ufs.c to ufs-uclass.c   Marek Vasut
  • [PATCH v2 4/7] ufs: amd-versal2: Fix indent   Marek Vasut
  • [PATCH v2 5/7] ufs: Call ufs_scsi_bind() from uclass .post_bind   Marek Vasut
  • [PATCH v2 6/7] ufs: renesas: Update Kconfig entry help text   Marek Vasut
  • [PATCH v2 7/7] ufs: Add UFS driver for Renesas R-Car X5H   Marek Vasut
    • [PATCH v2 7/7] ufs: Add UFS driver for Renesas R-Car X5H   Neil Armstrong
  • [PATCH v2 1/7] ufs: core: Keep Makefile and Kconfig list sorted   Neil Armstrong
• [PATCH v1] toradex: verdin-am62: sync rm-cfg with SDK 11.01.05.03 baseline   Vitor Soares
  • [PATCH v1] toradex: verdin-am62: sync rm-cfg with SDK 11.01.05.03 baseline   Francesco Dolcini
• [PATCH v2 1/2] ARM: bootm: Add support for starting Linux through OpTee-OS on ARMv7a   Marek Vasut
  • [PATCH v2 1/2] ARM: bootm: Add support for starting Linux through OpTee-OS on ARMv7a   Tom Rini
    • [PATCH v2 1/2] ARM: bootm: Add support for starting Linux through OpTee-OS on ARMv7a   Marek Vasut
• [PATCH v3 00/11] spi: airoha: driver improvements   Mikhail Kshevetskiy
  • [PATCH v3 02/11] spi: airoha: add support of dual/quad wires spi modes to exec_op() handler   Mikhail Kshevetskiy
  • [PATCH v3 03/11] spi: airoha: add dma support   Mikhail Kshevetskiy
  • [PATCH v3 04/11] spi: airoha: return an error for continuous mode dirmap creation cases   Mikhail Kshevetskiy
  • [PATCH v3 05/11] spi: airoha: support of dualio/quadio flash reading commands   Mikhail Kshevetskiy
  • [PATCH v3 06/11] spi: airoha: buffer must be 0xff-ed before writing   Mikhail Kshevetskiy
  • [PATCH v3 07/11] spi: airoha: avoid setting of page/oob sizes in REG_SPI_NFI_PAGEFMT   Mikhail Kshevetskiy
  • [PATCH v3 08/11] spi: airoha: reduce the number of modification of REG_SPI_NFI_CNFG and REG_SPI_NFI_SECCUS_SIZE registers   Mikhail Kshevetskiy
  • [PATCH v3 09/11] spi: airoha: set custom sector size equal to flash page size   Mikhail Kshevetskiy
  • [PATCH v3 10/11] spi: airoha: avoid usage of flash specific parameters   Mikhail Kshevetskiy
  • [PATCH v3 11/11] spi: airoha: en7523: workaround flash damaging if UART_TXD was short to GND   Mikhail Kshevetskiy
• [PATCH v3 01/11] spi: airoha: remove unnecessary operation adjust_op_size   Mikhail Kshevetskiy
• [PATCH 0/4] rockchip: use rockchip_stimer_init from spl_common.c on PX30/RK3036 + "cosmetic" fix   Quentin Schulz
  • [PATCH 1/4] rockchip: px30: use rockchip_stimer_init from spl_common.o for TPL   Quentin Schulz
  • [PATCH 2/4] rockchip: rk3036: use rockchip_stimer_init from spl_common.o   Quentin Schulz
  • [PATCH 3/4] rockchip: rk3399: fix TIMER_FMODE constant   Quentin Schulz
  • [PATCH 4/4] rockchip: spl_common: fix TIMER_FMODE constant   Quentin Schulz
• [PATCH 0/2] clk: versaclock: Fix two issues found by Smatch   Tom Rini
• [PATCH] clk: Return value calculated by ERR_PTR   Tom Rini
  • [PATCH] clk: Return value calculated by ERR_PTR   Tom Rini
    • [PATCH] clk: Return value calculated by ERR_PTR   Andrew Goodbody
• [PATCH] gpio: intel_gpio: Initialise or0 and or1   Tom Rini
• [PATCH] mmc: owl_mmc: Do not dereference data before NULL check   Tom Rini
• [PATCH] spi: ich: Do not use uninitialised value   Tom Rini
• [PATCH] spi: npcm-fiu: Remove repeated test   Tom Rini
• [PATCH] spi: fspi: Logical or used instead of logical and   Tom Rini
• [PATCH 0/2] spi: cadence_qspi: Fix Smatch reported issues   Tom Rini
• [PATCH] MAINTAINERS: update my email address   Raymond Mao
  • [PATCH] MAINTAINERS: update my email address   Tom Rini
• [PATCH v3 1/2] ARM: bootm: Add support for starting Linux through OpTee-OS on ARMv7a   Marek Vasut
  • [PATCH v3 2/2] spl: fit: Add ability to jump to Linux via OpTee-OS on ARMv7a   Marek Vasut
    • [PATCH v3 2/2] spl: fit: Add ability to jump to Linux via OpTee-OS on ARMv7a   Jerome Forissier
• [PATCH] cmd: mtd: Prevent use of uninitialised variable   Tom Rini
• [PATCH] mtd: nand: Prevent dereference of NULL pointer   Tom Rini
• (subset) [PATCH 1/3] clk: Add missing <dm/device.h> to include/clk.h   Tom Rini
• [PATCH] mtd: Add function prototype for mtd_read_oob_bf(...)   Tom Rini
• [PATCH] mtd: Correct dependency on SYS_FLASH_CHECKSUM   Tom Rini
• [PATCH] mtd: spi: sf_dataflash.c: Make use of 'z' for printing size_t   Tom Rini
• [PATCH] mtd: nvmxip: Make use of LBAF for printing lbaint_t   Tom Rini
• [PATCH] x86: Rename arch/x86/include/asm/pnp_def.h to include/pnp_def.h   Tom Rini
• [PATCH v2] clk: Tighten some clock driver dependencies   Tom Rini
• (subset) [PATCH] sysreset: Tighten some sysreset driver dependencies   Tom Rini
• [PATCH 1/2] spi: Tighten some spi driver dependencies   Tom Rini
• [PATCH 2/2] spi: altera_spi: Add missing <time.h> to altera_spi.c   Tom Rini
• [PULL] u-boot-usb/master   Marek Vasut
  • [PULL] u-boot-usb/master   Tom Rini
• [PULL] u-boot-riscv/master   Leo Liang
  • [PULL] u-boot-riscv/master   Tom Rini
• [PATCH 1/1] andes: ae350: Remove fdt_high default   Leo Yu-Chi Liang
• [PATCH 1/1] riscv: cpu: Beautify the warning message   Leo Yu-Chi Liang
• [PATCH 1/1] configs: Change default baud rate to 115200   Leo Yu-Chi Liang
• [PATCH 1/1] falcon: support booting linux from MMC/Parallel Flash   Leo Yu-Chi Liang
• [PATCH] arm: dts: brcp1: Move SPL partition to offset 0x8000 in SPI flash   Wolfgang Wallner
  • [PATCH] arm: dts: brcp1: Move SPL partition to offset 0x8000 in SPI flash   Michal Simek
• [PATCH 1/3] bsh: update readme with instructions to build M2B   Andrea Calabrese
  • [PATCH 2/3] bsh: imx6ulz_smm_m2: Update imx6ulz BSH SMM M2B board   Andrea Calabrese
  • [PATCH 3/3] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2D board   Andrea Calabrese
  • [PATCH 1/3] bsh: update readme with instructions to build M2B   Tom Rini
    • [PATCH 1/3] bsh: update readme with instructions to build M2B   Andrea Calabrese
• [GIT PULL] Please pull u-boot-ufs-20251029   Neil Armstrong
  • [GIT PULL] Please pull u-boot-ufs-20251029   Tom Rini
• [PATCH] boot: specify SPL_FIT_FULL_CHECK applies to SPL   Quentin Schulz
• [PATCH 0/3] pwm: put symbols into a menu + use if DM_PWM block instead of depends on   Quentin Schulz
  • [PATCH 1/3] pwm: move all PWM related topics inside a Kconfig menu   Quentin Schulz
    • [PATCH 1/3] pwm: move all PWM related topics inside a Kconfig menu   Tom Rini
  • [PATCH 2/3] pwm: put all UCLASS PWM drivers under an if condition on DM_PWM   Quentin Schulz
    • [PATCH 2/3] pwm: put all UCLASS PWM drivers under an if condition on DM_PWM   Tom Rini
  • [PATCH 3/3] pwm: fix typo in PWM_MESON help text   Quentin Schulz
    • [PATCH 3/3] pwm: fix typo in PWM_MESON help text   Tom Rini
• [PATCH] serial: make VPL_DM_SERIAL depend on VPL_DM   Quentin Schulz
  • [PATCH] serial: make VPL_DM_SERIAL depend on VPL_DM   Tom Rini
  • [PATCH] serial: make VPL_DM_SERIAL depend on VPL_DM   Simon Glass
• [PATCH] boot: fix typo in SYS_BOOTM_LEN description   Quentin Schulz
  • [PATCH] boot: fix typo in SYS_BOOTM_LEN description   Simon Glass
• [PATCH] rsa: fix typo in $(PHASE_)RSA_VERIFY_WITH_PKEY help text   Quentin Schulz
• [PATCH] rsa: always build pss padding   Quentin Schulz
  • [PATCH] rsa: always build pss padding   Tom Rini
    • [PATCH] rsa: always build pss padding   Quentin Schulz
      • [PATCH] rsa: always build pss padding   Quentin Schulz
• [PATCH] binman: btool: mkimage: fix Bintoolmkimage.run() method docstring   Quentin Schulz
• [PATCH] rockchip: imply most symbols for ARCH_ROCKCHIP   Quentin Schulz
• [PATCH 1/1] Dockerfile: remove Python 2.7   Heinrich Schuchardt
  • [PATCH 1/1] Dockerfile: remove Python 2.7   Simon Glass
• [PATCH 1/1] qfw: Add more fields and a heading to qfw list   Heinrich Schuchardt
• [PATCH v2] doc: pytest: Complete dependencies list with missing packages   Kory Maincent
• [PATCH] ufs: Keep Makefile and Kconfig sorted one more time   Marek Vasut
  • [PATCH] ufs: Keep Makefile and Kconfig sorted one more time   Igor Belwon
    • [PATCH] ufs: Keep Makefile and Kconfig sorted one more time   Marek Vasut
• [PATCH v1] Cyclone V Board handsoff script   Brian Sune
  • [PATCH v1] Cyclone V Board handsoff script   Tom Rini
    • [PATCH v1] Cyclone V Board handsoff script   Sune Brian
      • [PATCH v1] Cyclone V Board handsoff script   Sune Brian
• [GIT PULL] please pull mmc-power-2025-10-30   Peng Fan
  • [GIT PULL] please pull mmc-power-2025-10-30   Tom Rini
• [PATCH] Gitlab CI: Rework our tag usage again   Tom Rini
• [PATCH v9 0/8] Allow falcon boot from R5 SPL on TI's AM62 devices   Anshul Dalal
  • [PATCH v9 1/8] arch: arm: k3-binman: add fit for falcon boot   Anshul Dalal
  • [PATCH v9 2/8] configs: add falcon mode fragment for k3 devices   Anshul Dalal
  • [PATCH v9 4/8] mach-k3: common: support only MMC in R5 falcon mode   Anshul Dalal
    • [PATCH v9 4/8] mach-k3: common: support only MMC in R5 falcon mode   Andrew Davis
      • [PATCH v9 4/8] mach-k3: common: support only MMC in R5 falcon mode   Anshul Dalal
  • [PATCH v9 5/8] mach-k3: r5: common: add fdt fixups for falcon mode   Anshul Dalal
  • [PATCH v9 6/8] mach-k3: r5: common: add bootargs to kernel's dtb   Anshul Dalal
  • [PATCH v9 7/8] Makefile: add tifalcon.bin to CLEAN_FILES   Anshul Dalal
  • [PATCH v9 8/8] doc: ti: document R5 falcon mode for AM62 platforms   Anshul Dalal
• [PATCH v9 3/8] mach-k3: common: enable falcon mode from R5 SPL   Anshul Dalal
  • [PATCH v9 3/8] mach-k3: common: enable falcon mode from R5 SPL   Andrew Davis
    • [PATCH v9 3/8] mach-k3: common: enable falcon mode from R5 SPL   Anshul Dalal
      • [PATCH v9 3/8] mach-k3: common: enable falcon mode from R5 SPL   Andrew Goodbody
      • [PATCH v9 3/8] mach-k3: common: enable falcon mode from R5 SPL   Andrew Davis
• [PATCH v1 0/3] ram: starfive: cleanup size types and typos   E Shattow
  • [PATCH v1 1/3] ram: starfive: drop references to 16GB memory size   E Shattow
    • [PATCH v1 1/3] ram: starfive: drop references to 16GB memory size   Heinrich Schuchardt
  • [PATCH v1 2/3] ram: starfive: use SZ_8G for 8GB memory size   E Shattow
    • [PATCH v1 2/3] ram: starfive: use SZ_8G for 8GB memory size   Hal Feng
    • [PATCH v1 2/3] ram: starfive: use SZ_8G for 8GB memory size   Heinrich Schuchardt
  • [PATCH v1 3/3] ram: starfive: fix typo for unsupported DDR size   E Shattow
    • [PATCH v1 3/3] ram: starfive: fix typo for unsupported DDR size   Heinrich Schuchardt
• [PATCH v3 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Yannick FERTRE
• [PATCH v3 2/7] video: simple_panel: add support for "panel-lvds" display   Yannick FERTRE
• [PATCH v3 3/7] video: stm32: STM32 driver support for LVDS   Yannick FERTRE
• [PATCH v3 4/7] video: stm32: ltdc: support new hardware version for STM32MP25 SoC   Yannick FERTRE
• [PATCH v3 5/7] video: stm32: ltdc: properly search the first available panel   Yannick FERTRE
• [PATCH v3 6/7] ARM: dts: stm32: use LTDC and LVDS nodes before relocation in stm32mp25-u-boot   Yannick FERTRE
• [PATCH v3 7/7] configs: stm32mp25: enable LVDS display support   Yannick FERTRE
• [PATCH v2 1/3] bsh: update readme with instructions to build M2B   Andrea Calabrese
  • [PATCH v2 2/3] bsh: imx6ulz_smm_m2: Update imx6ulz BSH SMM M2B board   Andrea Calabrese
  • [PATCH v2 3/3] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2D board   Andrea Calabrese
  • [PATCH v2 1/3] bsh: update readme with instructions to build M2B   Tom Rini
• [PATCH v4 00/13] am62: IO+DDR resume support   Markus Schneider-Pargmann (TI.com)
  • [PATCH v4 01/13] arm: mach-k3: Remove CANUART IO isolation   Markus Schneider-Pargmann (TI.com)
  • [PATCH v4 02/13] arm: mach-k3: Kconfig: Add symbols for IO+DDR Low Power Mode   Markus Schneider-Pargmann (TI.com)
  • [PATCH v4 03/13] ram: k3-ddrss: Add support for DDR in self-refresh   Markus Schneider-Pargmann (TI.com)
  • [PATCH v4 04/13] firmware: ti_sci: Add TI_SCI_MSG_MIN_CONTEXT_RESTORE   Markus Schneider-Pargmann (TI.com)
  • [PATCH v4 05/13] arm: mach-k3: common: Add CANUART wakeup check helpers   Markus Schneider-Pargmann (TI.com)
  • [PATCH v4 06/13] arm: mach-k3: common: Add lpm_resume_from_ddr   Markus Schneider-Pargmann (TI.com)
  • [PATCH v4 07/13] arm: mach-k3: common: Helper for LPM meta data address from DT   Markus Schneider-Pargmann (TI.com)
  • [PATCH v4 08/13] arm: mach-k3: am62a7_init: Resume on LPM exit   Markus Schneider-Pargmann (TI.com)
  • [PATCH v4 09/13] arm: mach-k3: am62p5_init: Resume on LPM exit   Markus Schneider-Pargmann (TI.com)
  • [PATCH v4 10/13] arm: dts: k3-am62a: Add r5 device nodes   Markus Schneider-Pargmann (TI.com)
  • [PATCH v4 11/13] arm: dts: k3-am62p: Add r5 device nodes   Markus Schneider-Pargmann (TI.com)
  • [PATCH v4 12/13] configs: am62ax_evm_r5: Enable IODDR resume support   Markus Schneider-Pargmann (TI.com)
  • [PATCH v4 13/13] configs: am62p_evm_r5_defconfig: Enable IODDR resume support   Markus Schneider-Pargmann (TI.com)
• [PATCH v2 0/4] pwm: put symbols into a menu + use if DM_PWM block instead of depends on   Quentin Schulz
  • [PATCH v2 2/4] pwm: make sandbox depend on DM_PWM   Quentin Schulz
  • [PATCH v2 3/4] pwm: put all PWM DM drivers under an if condition on DM_PWM   Quentin Schulz
  • [PATCH v2 4/4] pwm: fix typo in PWM_MESON help text   Quentin Schulz
• [PATCH v2 1/4] pwm: move all PWM related topics inside a Kconfig menu   Quentin Schulz
• [PULL] Please pull qcom-for-2026.01-rc2   Casey Connolly
• Please pull u-boot-i2c master   Heiko Schocher
• [PATCH 0/5] Colorful mix of small fixes and UART improvements for Qualcomm   Casey Connolly
• [PATCH] qcom_defconfig: enable watchdog command   Casey Connolly
• [PATCH v2 0/6] Fix UART autoboot issues on DragonBoard 410c   Casey Connolly
• [PATCH] clk/stub: add sc7180-rpmh clock   Casey Connolly
• [PATCH 0/6] usb: host: ehci-msm: Clean up and fix crashes   Casey Connolly
• [PATCH 0/3] ti: add speed grades support for AM62a   Anshul Dalal
• [PATCH 1/3] mach-k3: am62px: remove fdt_fixup_cpu_freq_nodes_am62p   Anshul Dalal
• [PATCH 2/3] mach-k3: refactor A53 speed grade clock-rate fixup   Anshul Dalal
• [PATCH 3/3] mach-k3: am62a: add support for speed grades   Anshul Dalal
• [PATCH] imx8mp_evk: Fix typo on maintainer's name   Fabio Estevam
  • [PATCH] imx8mp_evk: Fix typo on maintainer's name   Peng Fan
  • [PATCH] imx8mp_evk: Fix typo on maintainer's name   Fabio Estevam
• vexpress_fvp test.py CI errors   Fabio Estevam
  • vexpress_fvp test.py CI errors   Fabio Estevam
    • vexpress_fvp test.py CI errors   Michael Nazzareno Trimarchi
      • vexpress_fvp test.py CI errors   Fabio Estevam
      • vexpress_fvp test.py CI errors   Tom Rini
• [PATCH v5 00/20] Convert extension support to UCLASS and adds its support to boot flows   Kory Maincent (TI.com)
  • [PATCH v5 01/20] MAINTAINERS: Add maintainer for extension board support   Kory Maincent (TI.com)
  • [PATCH v5 02/20] board: ti: Exclude cape detection from xPL builds   Kory Maincent (TI.com)
  • [PATCH v5 03/20] board: ti: Fix CAPE_EEPROM_BUS_NUM Kconfig dependency   Kory Maincent (TI.com)
  • [PATCH v5 04/20] board: sunxi: Exclude DIP detection from XPL builds   Kory Maincent (TI.com)
  • [PATCH v5 05/20] board: compulab: Exclude compulab extension board detection from XPL builds   Kory Maincent (TI.com)
  • [PATCH v5 06/20] include: extension_board: Document the extension structure   Kory Maincent (TI.com)
  • [PATCH v5 07/20] boot: Move extension board support from cmd/ to boot/   Kory Maincent (TI.com)
  • [PATCH v5 08/20] boot: Add UCLASS support for extension boards   Kory Maincent (TI.com)
  • [PATCH v5 09/20] board: ti: Refactor cape detection code for readability   Kory Maincent (TI.com)
  • [PATCH v5 10/20] board: ti: Convert cape detection to use UCLASS framework   Kory Maincent (TI.com)
  • [PATCH v5 11/20] board: sunxi: Refactor CHIP board extension code   Kory Maincent (TI.com)
  • [PATCH v5 12/20] board: sunxi: Convert extension support to UCLASS framework   Kory Maincent (TI.com)
  • [PATCH v5 13/20] board: sandbox: Improve extension board scan implementation   Kory Maincent (TI.com)
  • [PATCH v5 14/20] board: sandbox: Convert extension support to UCLASS framework   Kory Maincent (TI.com)
  • [PATCH v5 15/20] board: compulab: Convert imx8mm-cl-iot-gate to UCLASS extension framework   Kory Maincent (TI.com)
  • [PATCH v5 16/20] boot: Remove legacy extension board support   Kory Maincent (TI.com)
  • [PATCH v5 17/20] boot: extension: Move overlay apply custom logic to command level   Kory Maincent (TI.com)
  • [PATCH v5 18/20] boot: pxe_utils: Add extension board devicetree overlay support   Kory Maincent (TI.com)
  • [PATCH v5 19/20] boot: bootmeth_efi: Refactor distro_efi_try_bootflow_files return logic   Kory Maincent (TI.com)
  • [PATCH v5 20/20] boot: bootmeth_efi: Add extension board devicetree overlay support   Kory Maincent (TI.com)
• [PATCH] clk: Prevent SIGSEGV on debug   Andrew Goodbody
• [PATCH] Invalidate cached FAT device upon boot error   Prasad Kale
• [PATCH V1 0/1] MTD/SPI: Add new part numbers and modify one part   Victor
  • [PATCH V1 1/1] MTD/SPI: Add new part numbers and modify one part number   Victor
• [PATCH] arm: dts: rockchip: Fix eMMC write on RK3528   Tianling Shen
  • [PATCH] arm: dts: rockchip: Fix eMMC write on RK3528   Jonas Karlman
• [PATCH] mtd: spinand: add support for FudanMicro FM25S01A   Tianling Shen
• [PATCH v4 1/2] ARM: bootm: Add support for starting Linux through OPTEE-OS on ARMv7a   Marek Vasut
  • [PATCH v4 2/2] spl: fit: Add ability to jump to Linux via OPTEE-OS on ARMv7a   Marek Vasut
• [PATCH 1/4] ufs: cadence: Rename CONFIG_CADENCE_UFS to CONFIG_UFS_CADENCE   Marek Vasut
  • [PATCH 2/4] ufs: qcom: Rename CONFIG_QCOM_UFS to CONFIG_UFS_QCOM   Marek Vasut
  • [PATCH 3/4] ufs: rockchip: Rename CONFIG_ROCKCHIP_UFS to CONFIG_UFS_ROCKCHIP   Marek Vasut
  • [PATCH 4/4] ufs: ti: Rename CONFIG_TI_J721E_UFS to CONFIG_UFS_TI_J721E   Marek Vasut
• [GIT PULL] Please pull u-boot-imx-master-20251030   Fabio Estevam
• [DEBUG] rk3399-nanopi-neo4: SPL SD init may report -5 due to SD power-on timing   Sune Brian
• [PATCH] ARM: stm32: Add missing build of ST DFU virt code on DH STM32MP1 DHSOM   Marek Vasut
• [PATCH 0/6] ti: j7: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
  • [PATCH 1/6] arm: dts: k3-j7200: ddr: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
  • [PATCH 2/6] arm: dts: k3-j721s2: ddr: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
  • [PATCH 3/6] arm: dts: k3-am68: ddr: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
  • [PATCH 4/6] arm: dts: k3-j784s4: ddr: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
  • [PATCH 6/6] arm: dts: k3-j742s2: ddr: Update to v0.12.0 of DDR config tool   Neha Malcom Francis