[PATCH 0/4] Add PCIe Endpoint controller support for TI J784S4 SoC

[Hrushikesh Salunke]

This series enables PCIe Endpoint mode on TI's J784S4 SoC. The J784S4
SoC features two Cadence PCIe controller instances (PCIe0 and PCIe1)
that can operate in endpoint mode. This series adds support for
configuring these controllers with up to 4 lanes.

Key changes include:
- Adding a stabilization delay after power domain reset to prevent
  timing-related initialization issues
- SERDES mux configuration support for proper lane routing, which is
  essential for SoCs where SERDES lanes are shared between multiple
  controllers (PCIe, USB, etc.) with different configurations across
  boot phases
- J784S4 SoC endpoint configuration with 4-lane support
- Disabling unconfigured endpoint functions to prevent enumeration
  issues on the Root Complex side

This series has been tested on J784S4 EVM with PCIe endpoint boot
configuration. Following are the corresponding test logs.

https://gist.github.com/hrushikesh221/331d65f45f43fd138f57e6adb61c4332

This series is based on commit
4e4a9de31de (origin/next) Merge branch 'next' of git://source.denx.de/u-boot-usb into next

Hrushikesh Salunke (4):
  pci_endpoint: pci_cdns_ti_ep: Add delay after power domain reset
  pci_endpoint: pci_cdns_ti_ep: Add SERDES mux configuration support
  pci_endpoint: pci_cdns_ti_ep: Enable PCIe Endpoint mode in J784S4 SoC
  configs: j784s4_evm_a72_defconfig: Enable configs for PCI Endpoint
    mode

 configs/j784s4_evm_a72_defconfig       |  2 ++
 drivers/pci_endpoint/pcie_cdns_ti_ep.c | 33 ++++++++++++++++++++++++--
 2 files changed, 33 insertions(+), 2 deletions(-)

-- 
2.34.1