[PATCH 1/6] ufs: core: Keep Makefile and Kconfig list sorted

[Neil Armstrong]

On 10/27/25 18:06, Marek Vasut wrote:
> Sort the Makefile and Kconfig lists alphabetically. No functional change.
> 
> Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
> ---
> Cc: Bhupesh Sharma <bhupesh.linux at gmail.com>
> Cc: Casey Connolly <casey.connolly at linaro.org>
> Cc: Michal Simek <michal.simek at amd.com>
> Cc: Neha Malcom Francis <n-francis at ti.com>
> Cc: Neil Armstrong <neil.armstrong at linaro.org>
> Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
> Cc: Sumit Garg <sumit.garg at kernel.org>
> Cc: Tom Rini <trini at konsulko.com>
> Cc: Tuyen Dang <tuyen.dang.xa at renesas.com>
> Cc: Venkatesh Yadav Abbarapu <venkatesh.abbarapu at amd.com>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh at renesas.com>
> Cc: u-boot-qcom at groups.io
> Cc: u-boot at lists.denx.de
> ---
>   drivers/ufs/Kconfig  | 38 +++++++++++++++++++-------------------
>   drivers/ufs/Makefile |  2 +-
>   2 files changed, 20 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/ufs/Kconfig b/drivers/ufs/Kconfig
> index b08ca08b07c..b466374fe40 100644
> --- a/drivers/ufs/Kconfig
> +++ b/drivers/ufs/Kconfig
> @@ -15,17 +15,6 @@ config CADENCE_UFS
>   	  This selects the platform driver for the Cadence UFS host
>   	  controller present on present TI's J721e devices.
>   
> -config UFS_PCI
> -	bool "PCI bus based UFS Controller support"
> -	depends on PCI && UFS
> -	help
> -	  This selects the PCI UFS Host Controller Interface. Select this if
> -	  you have UFS Host Controller with PCI Interface.
> -
> -	  If you have a controller with this interface, say Y here.
> -
> -	  If unsure, say N.
> -
>   config QCOM_UFS
>   	bool "Qualcomm Host Controller driver for UFS"
>   	depends on UFS && ARCH_SNAPDRAGON
> @@ -39,6 +28,25 @@ config TI_J721E_UFS
>   	  This selects the glue layer driver for Cadence controller
>   	  present on TI's J721E devices.
>   
> +config UFS_AMD_VERSAL2
> +	bool "AMD Versal Gen 2 UFS controller platform driver"
> +	depends on UFS && ZYNQMP_FIRMWARE
> +	help
> +	  This selects the AMD specific additions to UFSHCD platform driver.
> +	  UFS host on AMD needs some vendor specific configuration before accessing
> +	  the hardware.
> +
> +config UFS_PCI
> +	bool "PCI bus based UFS Controller support"
> +	depends on PCI && UFS
> +	help
> +	  This selects the PCI UFS Host Controller Interface. Select this if
> +	  you have UFS Host Controller with PCI Interface.
> +
> +	  If you have a controller with this interface, say Y here.
> +
> +	  If unsure, say N.
> +
>   config UFS_RENESAS
>   	bool "Renesas specific hooks to UFS controller platform driver"
>   	depends on UFS
> @@ -48,12 +56,4 @@ config UFS_RENESAS
>   	  UFS host on Renesas needs some vendor specific configuration before
>   	  accessing the hardware.
>   
> -config UFS_AMD_VERSAL2
> -	bool "AMD Versal Gen 2 UFS controller platform driver"
> -	depends on UFS && ZYNQMP_FIRMWARE
> -	help
> -	  This selects the AMD specific additions to UFSHCD platform driver.
> -	  UFS host on AMD needs some vendor specific configuration before accessing
> -	  the hardware.
> -
>   endmenu
> diff --git a/drivers/ufs/Makefile b/drivers/ufs/Makefile
> index 2a378e45111..548306fb99e 100644
> --- a/drivers/ufs/Makefile
> +++ b/drivers/ufs/Makefile
> @@ -7,6 +7,6 @@ obj-$(CONFIG_UFS) += ufs.o ufs-uclass.o
>   obj-$(CONFIG_CADENCE_UFS) += cdns-platform.o
>   obj-$(CONFIG_QCOM_UFS) += ufs-qcom.o
>   obj-$(CONFIG_TI_J721E_UFS) += ti-j721e-ufs.o
> +obj-$(CONFIG_UFS_AMD_VERSAL2) += ufs-amd-versal2.o ufshcd-dwc.o
>   obj-$(CONFIG_UFS_PCI) += ufs-pci.o
>   obj-$(CONFIG_UFS_RENESAS) += ufs-renesas.o
> -obj-$(CONFIG_UFS_AMD_VERSAL2) += ufs-amd-versal2.o ufshcd-dwc.o

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>