[PATCH v2 3/4] pwm: put all PWM DM drivers under an if condition on DM_PWM

[Quentin Schulz]

From: Quentin Schulz <quentin.schulz at cherry.de>

This simplifies the "depends on" since we don't need DM_PWM listed
explicitly there as it already is made explicit via the surrounding
"if". No intended change in behavior.

Reviewed-by: Tom Rini <trini at konsulko.com>
Signed-off-by: Quentin Schulz <quentin.schulz at cherry.de>
---
 drivers/pwm/Kconfig | 49 +++++++++++++++++++++++--------------------------
 1 file changed, 23 insertions(+), 26 deletions(-)

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index e8a21653020..522d72f9b97 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -11,9 +11,21 @@ config DM_PWM
 	  frequency/period can be controlled along with the proportion of that
 	  time that the signal is high.
 
+config PWM_IMX
+	bool "Enable support for i.MX27 and later PWM"
+	depends on MACH_IMX
+	help
+	  This PWM is found i.MX27 and later i.MX SoCs.
+
+config PWM_S5P
+	bool "Enable non-DM support for S5P PWM"
+	depends on (S5P || ARCH_NEXELL)
+	default y
+
+if DM_PWM
+
 config PWM_ASPEED
 	bool "Enable support for the Aspeed PWM"
-	depends on DM_PWM
 	select SYSCON
 	help
 	  This PWM is found on Ast2600 SoCs. It supports a programmable period
@@ -22,20 +34,19 @@ config PWM_ASPEED
 
 config PWM_AT91
 	bool "Enable support for PWM found on AT91 SoC's"
-	depends on DM_PWM && ARCH_AT91
+	depends on ARCH_AT91
 	help
 	  Support for PWM hardware on AT91 based SoC.
 
 config PWM_CADENCE_TTC
 	bool "Enable support for the Cadence TTC PWM"
-	depends on DM_PWM && !CADENCE_TTC_TIMER
+	depends on !CADENCE_TTC_TIMER
 	help
 	  Cadence TTC can be configured as timer which is done via
 	  CONFIG_CADENCE_TTC_TIMER or as PWM. This is covering only PWM now.
 
 config PWM_CROS_EC
 	bool "Enable support for the Chrome OS EC PWM"
-	depends on DM_PWM
 	help
 	  This PWM is found on several Chrome OS devices and controlled by
 	  the Chrome OS embedded controller. It may be used to control the
@@ -44,36 +55,28 @@ config PWM_CROS_EC
 
 config PWM_EXYNOS
 	bool "Enable support for the Exynos PWM"
-	depends on DM_PWM && ARCH_EXYNOS
+	depends on ARCH_EXYNOS
 	help
 	  This PWM is found on Samsung Exynos 5250 and other Samsung SoCs. It
 	  supports a programmable period and duty cycle. A 32-bit counter is
 	  used. It provides 5 channels which can be independently
 	  programmed. Channel 4 (the last) is normally used as a timer.
 
-config PWM_IMX
-	bool "Enable support for i.MX27 and later PWM"
-	depends on MACH_IMX
-	help
-	  This PWM is found i.MX27 and later i.MX SoCs.
-
 config PWM_MESON
 	bool "Enable support for Amlogic Meson SoCs PWM"
-	depends on DM_PWM
 	help
 	  This PWM is found on Amlogic Meson SoCs. It supports a
 	  programmable period and duty cycle for 2 independant channels.
 
 config PWM_MTK
 	bool "Enable support for MediaTek PWM"
-	depends on DM_PWM
 	help
 	  This PWM is found on MT7622, MT7623, and MT7629. It supports a
 	  programmable period and duty cycle.
 
 config PWM_ROCKCHIP
 	bool "Enable support for the Rockchip PWM"
-	depends on DM_PWM && ARCH_ROCKCHIP
+	depends on ARCH_ROCKCHIP
 	help
 	  This PWM is found on RK3288 and other Rockchip SoCs. It supports a
 	  programmable period and duty cycle. A 32-bit counter is used.
@@ -82,27 +85,20 @@ config PWM_ROCKCHIP
 
 config PWM_SANDBOX
 	bool "Enable support for the sandbox PWM"
-	depends on DM_PWM
 	help
 	  This is a sandbox PWM used for testing. It provides 3 channels and
 	  records the settings passed into it, but otherwise does nothing
 	  useful. The PWM can be enabled but is not connected to any outputs
 	  so this is not very useful.
 
-config PWM_S5P
-	bool "Enable non-DM support for S5P PWM"
-	depends on (S5P || ARCH_NEXELL)
-	default y
-
 config PWM_SIFIVE
 	bool "Enable support for SiFive PWM"
-	depends on DM_PWM
 	help
 	  This PWM is found SiFive's FU540 and other SoCs.
 
 config PWM_TEGRA
 	bool "Enable support for the Tegra PWM"
-	depends on DM_PWM && ARCH_TEGRA
+	depends on ARCH_TEGRA
 	help
 	  This PWM is found on Tegra 20 and other Nvidia SoCs. It supports
 	  four channels with a programmable period and duty cycle. Only a
@@ -111,7 +107,7 @@ config PWM_TEGRA
 
 config PWM_STM32
 	bool "Enable support for STM32 PWM"
-	depends on DM_PWM && MFD_STM32_TIMERS
+	depends on MFD_STM32_TIMERS
 	help
 	  This enables PWM driver for STMicroelectronics STM32 pulse width
 	  modulation. It uses STM32 timer devices that can have up to 4 output
@@ -119,22 +115,23 @@ config PWM_STM32
 
 config PWM_SUNXI
 	bool "Enable support for the Allwinner Sunxi PWM"
-	depends on DM_PWM && ARCH_SUNXI
+	depends on ARCH_SUNXI
 	help
 	  This PWM is found on H3, A64 and other Allwinner SoCs. It supports a
 	  programmable period and duty cycle. A 16-bit counter is used.
 
 config PWM_TI_EHRPWM
 	bool "Enable support for EHRPWM PWM"
-	depends on DM_PWM && ARCH_OMAP2PLUS
+	depends on ARCH_OMAP2PLUS
 	default y
 	help
 	  PWM driver support for the EHRPWM controller found on TI SOCs.
 
 config PWM_TI_ECAP
 	bool "Enable support for ECAP PWM"
-	depends on DM_PWM && ARCH_OMAP2PLUS
+	depends on ARCH_OMAP2PLUS
 	help
 	  PWM driver support for the ECAP controller found on TI SOCs.
 
+endif
 endmenu

-- 
2.51.0