[PATCH v2 16/18] rockchip: odroid-go2: Enable more commands

[Kever Yang]

On 2025/9/1 00:49, Jonas Karlman wrote:
> Enable the default commands and some more useful commands that can be
> useful to determin the state of the board from U-Boot CLI.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> v2: No change
> ---
>   configs/odroid-go2_defconfig | 19 +++++++++----------
>   1 file changed, 9 insertions(+), 10 deletions(-)
>
> diff --git a/configs/odroid-go2_defconfig b/configs/odroid-go2_defconfig
> index 70d74c65a2f3..512ffefc70f6 100644
> --- a/configs/odroid-go2_defconfig
> +++ b/configs/odroid-go2_defconfig
> @@ -42,22 +42,21 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
>   CONFIG_SPL_ATF=y
>   # CONFIG_TPL_FRAMEWORK is not set
>   # CONFIG_TPL_BANNER_PRINT is not set
> -# CONFIG_CMD_BOOTD is not set
> -# CONFIG_CMD_ELF is not set
> -# CONFIG_CMD_IMI is not set
> -# CONFIG_CMD_XIMG is not set
> -# CONFIG_CMD_LZMADEC is not set
> -# CONFIG_CMD_UNZIP is not set
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_MEMINFO_MAP=y
> +CONFIG_CMD_ADC=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_PWM=y
>   CONFIG_CMD_GPT=y
> -# CONFIG_CMD_LOADB is not set
> -# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_MISC=y
>   CONFIG_CMD_MMC=y
>   CONFIG_CMD_POWEROFF=y
>   CONFIG_CMD_USB=y
>   CONFIG_CMD_ROCKUSB=y
>   CONFIG_CMD_USB_MASS_STORAGE=y
> -# CONFIG_CMD_ITEST is not set
> -# CONFIG_CMD_SLEEP is not set
> +CONFIG_CMD_RNG=y
> +CONFIG_CMD_REGULATOR=y
>   # CONFIG_SPL_DOS_PARTITION is not set
>   # CONFIG_ISO_PARTITION is not set
>   CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64

-- 
Thanks & Best regards,
   Kever Yang
**************************************************************************************************
杨凯  市场部             Kever Yang      Marketing Department
瑞芯微电子股份有限公司                Rockchip Electronics Co.，Ltd。
地址：福建省福州市铜盘路软件大道89号软件园A区18号楼 (350003)
Addr : No.18 Building，A District，No.89，Fuzhou Software Boulevard，Fuzhou，Fujian，PRC