[PATCH v1 07/11] ARM: dts: Update config node for stm32mp157c-ed1-scmi-u-boot

[Patrice Chotard]

Remove u-boot,error-led property as it's the legacy LED stuff.
Use /options/u-boot to configure LED device as described here [1].

[1] https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/options/u-boot.yaml

Dependency with series https://patchwork.ozlabs.org/project/uboot/list/?series=476911

Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>

---

 arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi
index 7c0d1bab11a..54acd507d0e 100644
--- a/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi
@@ -12,8 +12,6 @@
 	};
 
 	config {
-		u-boot,boot-led = "led-blue";
-		u-boot,error-led = "led-red";
 		u-boot,mmc-env-partition = "u-boot-env";
 	};
 
@@ -36,7 +34,7 @@
 	led {
 		compatible = "gpio-leds";
 
-		led-blue {
+		led_blue: led-blue {
 			gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>;
 		};
 
@@ -44,6 +42,12 @@
 			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	options {
+		u-boot {
+			boot-led = <&led_blue>;
+		};
+	};
 };
 
 &uart4 {
-- 
2.43.0