[PATCH 6/6] ufs: Add UFS driver for Renesas R-Car X5H
Marek Vasut
marek.vasut+renesas at mailbox.org
Mon Oct 27 18:06:27 CET 2025
From: Tuyen Dang <tuyen.dang.xa at renesas.com>
Add UFS driver for UFS controller present on Renesas R-Car X5H R8A78000.
The controller uses different initialization code compared to previous
generation UFS controller present in Renesas R-Car S4 R8A779F0, and the
majority of the driver is the initialization, hence a new driver.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh at renesas.com>
Signed-off-by: Tuyen Dang <tuyen.dang.xa at renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
[Marek: Clean driver up, add SCMI reset handling, use read_poll_timeout(),
pass error values out of ufs_renesas_pre_init(), change the
compatible string to "renesas,r8a78000-ufs" to align with
previous generation "renesas,r8a779f0-ufs"]
---
Cc: Bhupesh Sharma <bhupesh.linux at gmail.com>
Cc: Casey Connolly <casey.connolly at linaro.org>
Cc: Michal Simek <michal.simek at amd.com>
Cc: Neha Malcom Francis <n-francis at ti.com>
Cc: Neil Armstrong <neil.armstrong at linaro.org>
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
Cc: Sumit Garg <sumit.garg at kernel.org>
Cc: Tom Rini <trini at konsulko.com>
Cc: Tuyen Dang <tuyen.dang.xa at renesas.com>
Cc: Venkatesh Yadav Abbarapu <venkatesh.abbarapu at amd.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh at renesas.com>
Cc: u-boot-qcom at groups.io
Cc: u-boot at lists.denx.de
---
drivers/ufs/Kconfig | 9 +
drivers/ufs/Makefile | 1 +
drivers/ufs/ufs-renesas-rcar-gen5.c | 268 ++++++++++++++++++++++++++++
3 files changed, 278 insertions(+)
create mode 100644 drivers/ufs/ufs-renesas-rcar-gen5.c
diff --git a/drivers/ufs/Kconfig b/drivers/ufs/Kconfig
index 4c6b08ad31c..363f53a6792 100644
--- a/drivers/ufs/Kconfig
+++ b/drivers/ufs/Kconfig
@@ -56,4 +56,13 @@ config UFS_RENESAS
platform driver. UFS host on Renesas needs some vendor
specific configuration before accessing the hardware.
+config UFS_RENESAS_GEN5
+ bool "Renesas R-Car X5H UFS Controller support"
+ depends on UFS
+ select BOUNCE_BUFFER
+ help
+ This selects the Renesas X5H specific additions to UFSHCD
+ platform driver. UFS host on Renesas needs some vendor
+ specific configuration before accessing the hardware.
+
endmenu
diff --git a/drivers/ufs/Makefile b/drivers/ufs/Makefile
index 2ac410cf7c3..46866260b7b 100644
--- a/drivers/ufs/Makefile
+++ b/drivers/ufs/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_TI_J721E_UFS) += ti-j721e-ufs.o
obj-$(CONFIG_UFS_AMD_VERSAL2) += ufs-amd-versal2.o ufshcd-dwc.o
obj-$(CONFIG_UFS_PCI) += ufs-pci.o
obj-$(CONFIG_UFS_RENESAS) += ufs-renesas.o
+obj-$(CONFIG_UFS_RENESAS_GEN5) += ufs-renesas-rcar-gen5.o
diff --git a/drivers/ufs/ufs-renesas-rcar-gen5.c b/drivers/ufs/ufs-renesas-rcar-gen5.c
new file mode 100644
index 00000000000..3c66022579f
--- /dev/null
+++ b/drivers/ufs/ufs-renesas-rcar-gen5.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Renesas UFS host controller driver
+ *
+ * Copyright (C) 2025 Renesas Electronics Corporation
+ */
+
+#include <clk.h>
+#include <dm.h>
+#include <ufs.h>
+#include <asm/io.h>
+#include <dm/device_compat.h>
+#include <linux/iopoll.h>
+#include <reset.h>
+
+#include "ufs.h"
+
+#define UFS_RENESAS_TIMEOUT_US 100000
+
+struct ufs_renesas_priv {
+ struct clk_bulk clks;
+ struct reset_ctl_bulk resets;
+ fdt_addr_t phy_base;
+ /* The hardware needs initialization once */
+ bool initialized;
+};
+
+static void ufs_dme_command(struct ufs_hba *hba, u32 cmd,
+ u32 arg1, u32 arg2, u32 arg3)
+{
+ ufshcd_writel(hba, arg1, REG_UIC_COMMAND_ARG_1);
+ ufshcd_writel(hba, arg2, REG_UIC_COMMAND_ARG_2);
+ ufshcd_writel(hba, arg3, REG_UIC_COMMAND_ARG_3);
+ ufshcd_writel(hba, cmd, REG_UIC_COMMAND);
+}
+
+static int ufs_renesas_pre_init(struct ufs_hba *hba)
+{
+ struct ufs_renesas_priv *priv = dev_get_priv(hba->dev);
+ u32 val32;
+ u16 val16;
+ int ret;
+
+ writew(0x0001, priv->phy_base + 0x20000);
+ writew(0x005c, priv->phy_base + 0x20212);
+ writew(0x005c, priv->phy_base + 0x20214);
+ writew(0x005c, priv->phy_base + 0x20216);
+ writew(0x005c, priv->phy_base + 0x20218);
+ writew(0x036a, priv->phy_base + 0x201d0);
+ writew(0x0102, priv->phy_base + 0x201d2);
+ writew(0x001f, priv->phy_base + 0x20082);
+ writew(0x000b, priv->phy_base + 0x20084);
+ writew(0x0126, priv->phy_base + 0x201d2);
+ writew(0x01dc, priv->phy_base + 0x20214);
+ writew(0x01dc, priv->phy_base + 0x20218);
+ writew(0x0000, priv->phy_base + 0x201cc);
+ writew(0x0200, priv->phy_base + 0x201ce);
+ writew(0x0000, priv->phy_base + 0x20212);
+ writew(0x0000, priv->phy_base + 0x20216);
+
+ ret = readw_poll_timeout(priv->phy_base + 0x201ec, val16,
+ !(val16 & BIT(12)), UFS_RENESAS_TIMEOUT_US);
+ if (ret)
+ return ret;
+
+ ret = readw_poll_timeout(priv->phy_base + 0x201e4, val16,
+ !(val16 & BIT(12)), UFS_RENESAS_TIMEOUT_US);
+ if (ret)
+ return ret;
+
+ ret = readw_poll_timeout(priv->phy_base + 0x201f0, val16,
+ !(val16 & BIT(12)), UFS_RENESAS_TIMEOUT_US);
+ if (ret)
+ return ret;
+
+ writew(0x0000, priv->phy_base + 0x20000);
+
+ ufshcd_writel(hba, BIT(0), REG_CONTROLLER_ENABLE);
+
+ ret = read_poll_timeout(ufshcd_readl, val32, (val32 & BIT(0)),
+ 1, UFS_RENESAS_TIMEOUT_US,
+ hba, REG_CONTROLLER_ENABLE);
+ if (ret)
+ return ret;
+
+ ret = read_poll_timeout(ufshcd_readl, val32, (val32 & BIT(3)),
+ 1, UFS_RENESAS_TIMEOUT_US,
+ hba, REG_CONTROLLER_STATUS);
+ if (ret)
+ return ret;
+
+ /* Skip IE because we cannot handle interrupts here */
+ ufs_dme_command(hba, 0x00000002, 0x81010000, 0x00000000, 0x00000005);
+ ufs_dme_command(hba, 0x00000002, 0x81150000, 0x00000000, 0x00000001);
+ ufs_dme_command(hba, 0x00000002, 0x81180000, 0x00000000, 0x00000001);
+ ufs_dme_command(hba, 0x00000002, 0x80090000, 0x00000000, 0x00000000);
+ ufs_dme_command(hba, 0x00000002, 0x800a0000, 0x00000000, 0x000000c8);
+ ufs_dme_command(hba, 0x00000002, 0x80090001, 0x00000000, 0x00000000);
+ ufs_dme_command(hba, 0x00000002, 0x800a0001, 0x00000000, 0x000000c8);
+ ufs_dme_command(hba, 0x00000002, 0x800a0004, 0x00000000, 0x00000000);
+ ufs_dme_command(hba, 0x00000002, 0x800b0004, 0x00000000, 0x00000064);
+ ufs_dme_command(hba, 0x00000002, 0x800a0005, 0x00000000, 0x00000000);
+ ufs_dme_command(hba, 0x00000002, 0x800b0005, 0x00000000, 0x00000064);
+ ufs_dme_command(hba, 0x00000002, 0xd0850000, 0x00000000, 0x00000001);
+
+ writew(0x0001, priv->phy_base + 0x20000);
+
+ clrbits_le16(priv->phy_base + 0x20022, BIT(0));
+
+ ret = readw_poll_timeout(priv->phy_base + (0x00198 << 1), val16,
+ (val16 & BIT(0)), UFS_RENESAS_TIMEOUT_US);
+ if (ret)
+ return ret;
+
+ writew(0x0368, priv->phy_base + 0x201d0);
+
+ ret = readw_poll_timeout(priv->phy_base + 0x201e4, val16,
+ !(val16 & BIT(11)), UFS_RENESAS_TIMEOUT_US);
+ if (ret)
+ return ret;
+
+ ret = readw_poll_timeout(priv->phy_base + 0x201e8, val16,
+ !(val16 & BIT(11)), UFS_RENESAS_TIMEOUT_US);
+ if (ret)
+ return ret;
+
+ ret = readw_poll_timeout(priv->phy_base + 0x201ec, val16,
+ !(val16 & BIT(11)), UFS_RENESAS_TIMEOUT_US);
+ if (ret)
+ return ret;
+
+ ret = readw_poll_timeout(priv->phy_base + 0x201f0, val16,
+ !(val16 & BIT(11)), UFS_RENESAS_TIMEOUT_US);
+ if (ret)
+ return ret;
+
+ priv->initialized = true;
+
+ return 0;
+}
+
+static int ufs_renesas_init(struct ufs_hba *hba)
+{
+ hba->quirks |= UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS | UFSHCD_QUIRK_HIBERN_FASTAUTO |
+ UFSHCD_QUIRK_BROKEN_LCC;
+
+ return 0;
+}
+
+static int ufs_renesas_hce_enable_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
+{
+ struct ufs_renesas_priv *priv = dev_get_priv(hba->dev);
+ int ret;
+
+ if (priv->initialized)
+ return 0;
+
+ if (status == PRE_CHANGE) {
+ ret = ufs_renesas_pre_init(hba);
+ if (ret)
+ return ret;
+ }
+
+ priv->initialized = true;
+
+ return 0;
+}
+
+static int ufs_renesas_link_startup_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
+{
+ if (status == PRE_CHANGE)
+ return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0);
+
+ return 0;
+}
+
+static int ufs_renesas_get_max_pwr_mode(struct ufs_hba *hba,
+ struct ufs_pwr_mode_info *max_pwr_info)
+{
+ max_pwr_info->info.gear_rx = UFS_HS_G5;
+ max_pwr_info->info.gear_tx = UFS_HS_G5;
+ max_pwr_info->info.pwr_tx = FASTAUTO_MODE;
+ max_pwr_info->info.pwr_rx = FASTAUTO_MODE;
+ max_pwr_info->info.hs_rate = PA_HS_MODE_A;
+
+ max_pwr_info->info.lane_rx = 1;
+ max_pwr_info->info.lane_tx = 1;
+
+ dev_info(hba->dev, "Max HS Gear: %d\n", max_pwr_info->info.gear_rx);
+
+ return 0;
+}
+
+static struct ufs_hba_ops ufs_renesas_vops = {
+ .init = ufs_renesas_init,
+ .hce_enable_notify = ufs_renesas_hce_enable_notify,
+ .link_startup_notify = ufs_renesas_link_startup_notify,
+ .get_max_pwr_mode = ufs_renesas_get_max_pwr_mode,
+};
+
+static int ufs_renesas_pltfm_probe(struct udevice *dev)
+{
+ struct ufs_renesas_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ priv->phy_base = dev_read_addr_name(dev, "phy");
+ if (priv->phy_base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ ret = reset_get_bulk(dev, &priv->resets);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_get_bulk(dev, &priv->clks);
+ if (ret < 0)
+ goto err_clk_get;
+
+ ret = clk_enable_bulk(&priv->clks);
+ if (ret)
+ goto err_clk_enable;
+
+ reset_assert_bulk(&priv->resets);
+ reset_deassert_bulk(&priv->resets);
+
+ ret = ufshcd_probe(dev, &ufs_renesas_vops);
+ if (ret) {
+ dev_err(dev, "ufshcd_probe() failed %d\n", ret);
+ goto err_ufshcd_probe;
+ }
+
+ return 0;
+
+err_ufshcd_probe:
+ reset_assert_bulk(&priv->resets);
+ clk_disable_bulk(&priv->clks);
+err_clk_enable:
+ clk_release_bulk(&priv->clks);
+err_clk_get:
+ reset_release_bulk(&priv->resets);
+ return ret;
+}
+
+static int ufs_renesas_pltfm_remove(struct udevice *dev)
+{
+ struct ufs_renesas_priv *priv = dev_get_priv(dev);
+
+ reset_release_bulk(&priv->resets);
+ clk_disable_bulk(&priv->clks);
+ clk_release_bulk(&priv->clks);
+
+ return 0;
+}
+
+static const struct udevice_id ufs_renesas_pltfm_ids[] = {
+ { .compatible = "renesas,r8a78000-ufs" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(ufs_renesas) = {
+ .name = "ufs-renesas-gen5",
+ .id = UCLASS_UFS,
+ .of_match = ufs_renesas_pltfm_ids,
+ .probe = ufs_renesas_pltfm_probe,
+ .remove = ufs_renesas_pltfm_remove,
+ .priv_auto = sizeof(struct ufs_renesas_priv),
+};
--
2.51.0
More information about the U-Boot
mailing list