[PATCH] ufs: Keep Makefile and Kconfig sorted one more time
Marek Vasut
marek.vasut+renesas at mailbox.org
Wed Oct 29 21:14:10 CET 2025
Sort the Makefile and Kconfig alphabetically again. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
---
Cc: Bhupesh Sharma <bhupesh.linux at gmail.com>
Cc: Igor Belwon <igor.belwon at mentallysanemainliners.org>
Cc: Marek Vasut <marek.vasut+renesas at mailbox.org>
Cc: Neha Malcom Francis <n-francis at ti.com>
Cc: Neil Armstrong <neil.armstrong at linaro.org>
Cc: Shawn Lin <shawn.lin at rock-chips.com>
Cc: Tom Rini <trini at konsulko.com>
Cc: Tuyen Dang <tuyen.dang.xa at renesas.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh at renesas.com>
Cc: u-boot at lists.denx.de
---
drivers/ufs/Kconfig | 28 ++++++++++++++--------------
drivers/ufs/Makefile | 4 ++--
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/ufs/Kconfig b/drivers/ufs/Kconfig
index 68693b7d226..445270e8da1 100644
--- a/drivers/ufs/Kconfig
+++ b/drivers/ufs/Kconfig
@@ -15,20 +15,6 @@ config CADENCE_UFS
This selects the platform driver for the Cadence UFS host
controller present on present TI's J721e devices.
-config UFS_MEDIATEK
- tristate "MediaTek UFS Host Controller Driver"
- depends on UFS && ARCH_MEDIATEK
- select PHY_MTK_UFS
- help
- This selects the MediaTek specific additions to UFSHCD platform driver.
- UFS host on Mediatek needs some vendor specific configuration before
- accessing the hardware which includes PHY configuration and vendor
- specific registers.
-
- Select this if you have UFS controller on MediaTek chipset.
-
- If unsure, say N.
-
config QCOM_UFS
bool "Qualcomm Host Controller driver for UFS"
depends on UFS && ARCH_SNAPDRAGON
@@ -59,6 +45,20 @@ config UFS_AMD_VERSAL2
UFS host on AMD needs some vendor specific configuration before accessing
the hardware.
+config UFS_MEDIATEK
+ tristate "MediaTek UFS Host Controller Driver"
+ depends on UFS && ARCH_MEDIATEK
+ select PHY_MTK_UFS
+ help
+ This selects the MediaTek specific additions to UFSHCD platform driver.
+ UFS host on Mediatek needs some vendor specific configuration before
+ accessing the hardware which includes PHY configuration and vendor
+ specific registers.
+
+ Select this if you have UFS controller on MediaTek chipset.
+
+ If unsure, say N.
+
config UFS_PCI
bool "PCI bus based UFS Controller support"
depends on PCI && UFS
diff --git a/drivers/ufs/Makefile b/drivers/ufs/Makefile
index 15329b9795a..6b2f2ccc9fc 100644
--- a/drivers/ufs/Makefile
+++ b/drivers/ufs/Makefile
@@ -5,11 +5,11 @@
obj-$(CONFIG_UFS) += ufs-uclass.o
obj-$(CONFIG_CADENCE_UFS) += cdns-platform.o
-obj-$(CONFIG_UFS_MEDIATEK) += ufs-mediatek.o
obj-$(CONFIG_QCOM_UFS) += ufs-qcom.o
+obj-$(CONFIG_ROCKCHIP_UFS) += ufs-rockchip.o
obj-$(CONFIG_TI_J721E_UFS) += ti-j721e-ufs.o
obj-$(CONFIG_UFS_AMD_VERSAL2) += ufs-amd-versal2.o ufshcd-dwc.o
+obj-$(CONFIG_UFS_MEDIATEK) += ufs-mediatek.o
obj-$(CONFIG_UFS_PCI) += ufs-pci.o
obj-$(CONFIG_UFS_RENESAS) += ufs-renesas.o
obj-$(CONFIG_UFS_RENESAS_GEN5) += ufs-renesas-rcar-gen5.o
-obj-$(CONFIG_ROCKCHIP_UFS) += ufs-rockchip.o
--
2.51.0
More information about the U-Boot
mailing list