[PATCH v2 10/18] rockchip: odroid-go2: Use power off at power plug-in event

[Kever Yang]

On 2025/9/1 00:49, Jonas Karlman wrote:
> Include the RK817 PMIC in SPL and enable Kconfig options to power off
> the handheld gaming device when it was powered on due to a power cable
> plug-in event:
>
>    DDR3, 333MHz
>    BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
>    out
>    Power Off due to plug-in event
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> v2: No change
> ---
>   arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi | 18 ++++++++++++++++++
>   configs/odroid-go2_defconfig               |  3 +++
>   2 files changed, 21 insertions(+)
>
> diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
> index 6f40654d5e84..6c6efa964d80 100644
> --- a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
> +++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
> @@ -5,8 +5,26 @@
>   
>   #include "rk3326-u-boot.dtsi"
>   
> +&i2c0_xfer {
> +	bootph-pre-ram;
> +};
> +
> +&i2s1_2ch_mclk {
> +	bootph-pre-ram;
> +};
> +
> +&pcfg_pull_none_smt {
> +	bootph-pre-ram;
> +};
> +
> +&pmic_int {
> +	bootph-pre-ram;
> +};
> +
>   &rk817 {
>   	regulators {
> +		bootph-pre-ram;
> +
>   		vcc_cam: LDO_REG9 {
>   			regulator-name = "vcc_cam";
>   			regulator-min-microvolt = <3000000>;
> diff --git a/configs/odroid-go2_defconfig b/configs/odroid-go2_defconfig
> index b0947fe2c8b2..a6d02baa520f 100644
> --- a/configs/odroid-go2_defconfig
> +++ b/configs/odroid-go2_defconfig
> @@ -8,6 +8,7 @@ CONFIG_ENV_OFFSET=0x4000
>   CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3326-odroid-go2"
>   CONFIG_DM_RESET=y
>   CONFIG_ROCKCHIP_PX30=y
> +CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y
>   CONFIG_TARGET_ODROID_GO2=y
>   CONFIG_DEBUG_UART_CHANNEL=1
>   CONFIG_SYS_LOAD_ADDR=0x800800
> @@ -42,6 +43,7 @@ CONFIG_CMD_GPT=y
>   # CONFIG_CMD_LOADB is not set
>   # CONFIG_CMD_LOADS is not set
>   CONFIG_CMD_MMC=y
> +CONFIG_CMD_POWEROFF=y
>   CONFIG_CMD_USB=y
>   CONFIG_CMD_USB_MASS_STORAGE=y
>   # CONFIG_CMD_ITEST is not set
> @@ -73,6 +75,7 @@ CONFIG_SPL_PINCTRL=y
>   CONFIG_DM_PMIC=y
>   CONFIG_PMIC_RK8XX=y
>   CONFIG_SPL_PMIC_RK8XX=y
> +CONFIG_SPL_DM_REGULATOR=y
>   CONFIG_DM_REGULATOR_FIXED=y
>   CONFIG_REGULATOR_RK8XX=y
>   CONFIG_PWM_ROCKCHIP=y

-- 
Thanks & Best regards,
   Kever Yang
**************************************************************************************************
杨凯  市场部             Kever Yang      Marketing Department
瑞芯微电子股份有限公司                Rockchip Electronics Co.，Ltd。
地址：福建省福州市铜盘路软件大道89号软件园A区18号楼 (350003)
Addr : No.18 Building，A District，No.89，Fuzhou Software Boulevard，Fuzhou，Fujian，PRC