[PATCH 04/11] spi: airoha: support of dualio/quadio flash reading commands

[Mikhail Kshevetskiy]

Airoha snfi spi controller supports acceleration of DUAL/QUAD
operations, but does not supports DUAL_IO/QUAD_IO operations.
Luckily DUAL/QUAD operations do the same as DUAL_IO/QUAD_IO ones,
so we can issue corresponding DUAL/QUAD operation instead of
DUAL_IO/QUAD_IO one.

Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy at iopsys.eu>
---
 drivers/spi/airoha_snfi_spi.c | 27 +++++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/airoha_snfi_spi.c b/drivers/spi/airoha_snfi_spi.c
index f72d11f5b19..7cafa900bbc 100644
--- a/drivers/spi/airoha_snfi_spi.c
+++ b/drivers/spi/airoha_snfi_spi.c
@@ -141,6 +141,7 @@
 #define SPI_NFI_CUS_SEC_SIZE_EN			BIT(16)
 
 #define REG_SPI_NFI_RD_CTL2			0x0510
+#define SPI_NFI_DATA_READ_CMD			GENMASK(7, 0)
 
 #define REG_SPI_NFI_RD_CTL3			0x0514
 
@@ -175,7 +176,9 @@
 #define SPI_NAND_OP_READ_FROM_CACHE_SINGLE	0x03
 #define SPI_NAND_OP_READ_FROM_CACHE_SINGLE_FAST	0x0b
 #define SPI_NAND_OP_READ_FROM_CACHE_DUAL	0x3b
+#define SPI_NAND_OP_READ_FROM_CACHE_DUALIO	0xbb
 #define SPI_NAND_OP_READ_FROM_CACHE_QUAD	0x6b
+#define SPI_NAND_OP_READ_FROM_CACHE_QUADIO	0xeb
 #define SPI_NAND_OP_WRITE_ENABLE		0x06
 #define SPI_NAND_OP_WRITE_DISABLE		0x04
 #define SPI_NAND_OP_PROGRAM_LOAD_SINGLE		0x02
@@ -639,25 +642,37 @@ static int airoha_snand_dirmap_create(struct spi_mem_dirmap_desc *desc)
 static ssize_t airoha_snand_dirmap_read(struct spi_mem_dirmap_desc *desc,
 					u64 offs, size_t len, void *buf)
 {
-	struct spi_mem_op *op = &desc->info.op_tmpl;
 	struct spi_slave *slave = desc->slave;
 	struct udevice *bus = slave->dev->parent;
 	struct airoha_snand_priv *priv = dev_get_priv(bus);
 	u8 *txrx_buf = priv->txrx_buf;
 	dma_addr_t dma_addr;
-	u32 val, rd_mode;
+	u32 val, rd_mode, opcode;
 	int err;
 
-	switch (op->cmd.opcode) {
+	/*
+	 * DUALIO and QUADIO opcodes are not supported by the spi controller,
+	 * replace them with supported opcodes.
+	 */
+	opcode = desc->info.op_tmpl.cmd.opcode;
+	switch (opcode) {
+	case SPI_NAND_OP_READ_FROM_CACHE_SINGLE:
+	case SPI_NAND_OP_READ_FROM_CACHE_SINGLE_FAST:
+		rd_mode = 0;
+		break;
 	case SPI_NAND_OP_READ_FROM_CACHE_DUAL:
+	case SPI_NAND_OP_READ_FROM_CACHE_DUALIO:
+		opcode = SPI_NAND_OP_READ_FROM_CACHE_DUAL;
 		rd_mode = 1;
 		break;
 	case SPI_NAND_OP_READ_FROM_CACHE_QUAD:
+	case SPI_NAND_OP_READ_FROM_CACHE_QUADIO:
+		opcode = SPI_NAND_OP_READ_FROM_CACHE_QUAD;
 		rd_mode = 2;
 		break;
 	default:
-		rd_mode = 0;
-		break;
+		/* unknown opcode */
+		return -EOPNOTSUPP;
 	}
 
 	err = airoha_snand_set_mode(priv, SPI_MODE_DMA);
@@ -688,7 +703,7 @@ static ssize_t airoha_snand_dirmap_read(struct spi_mem_dirmap_desc *desc,
 
 	/* set read command */
 	err = regmap_write(priv->regmap_nfi, REG_SPI_NFI_RD_CTL2,
-			   op->cmd.opcode);
+			   FIELD_PREP(SPI_NFI_DATA_READ_CMD, opcode));
 	if (err)
 		goto error_dma_unmap;
 
-- 
2.51.0