[PATCH 1/2] phy: samsung: add enum for variants based on SoCs

[Kaustabh Chakraborty]

The variant enum is used to uniquely identify which SoC the PHY block
belongs to. It is initially set in the match table, along with the
compatible string, it gets copied to driver data struct during probe.

SoC specific functions must only be called if the respective variant
enum is set. Add switch-case blocks wherever required.

Signed-off-by: Kaustabh Chakraborty <kauschluss at disroot.org>
---
 drivers/phy/phy-exynos-usbdrd.c | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/phy-exynos-usbdrd.c b/drivers/phy/phy-exynos-usbdrd.c
index db5815ed1840caf4f01517a382cb1f471636bbfa..4ab8da2a08ff80fcc95f386958f345bba979f9c2 100644
--- a/drivers/phy/phy-exynos-usbdrd.c
+++ b/drivers/phy/phy-exynos-usbdrd.c
@@ -66,6 +66,10 @@
 #define KHZ					1000
 #define MHZ					(KHZ * KHZ)
 
+enum exynos_usbdrd_phy_variant {
+	EXYNOS850_USBDRD_PHY,
+};
+
 /**
  * struct exynos_usbdrd_phy - driver data for Exynos USB PHY
  * @reg_phy: USB PHY controller register memory base
@@ -73,6 +77,7 @@
  * @core_clk: core clock for phy (ref clock)
  * @reg_pmu: regmap for PMU block
  * @extrefclk: frequency select settings when using 'separate reference clocks'
+ * @variant: ID to uniquely distinguish USB PHY variant
  */
 struct exynos_usbdrd_phy {
 	void __iomem *reg_phy;
@@ -80,6 +85,7 @@ struct exynos_usbdrd_phy {
 	struct clk *core_clk;
 	struct regmap *reg_pmu;
 	u32 extrefclk;
+	enum exynos_usbdrd_phy_variant variant;
 };
 
 static void exynos_usbdrd_phy_isol(struct regmap *reg_pmu, bool isolate)
@@ -254,7 +260,13 @@ static int exynos_usbdrd_phy_init(struct phy *phy)
 	if (ret)
 		return ret;
 
-	exynos850_usbdrd_utmi_init(phy);
+	switch (phy_drd->variant) {
+	case EXYNOS850_USBDRD_PHY:
+		exynos850_usbdrd_utmi_init(phy);
+		break;
+	default:
+		dev_err(phy->dev, "Failed to recognize phy variant\n");
+	}
 
 	clk_disable_unprepare(phy_drd->clk);
 
@@ -270,7 +282,13 @@ static int exynos_usbdrd_phy_exit(struct phy *phy)
 	if (ret)
 		return ret;
 
-	exynos850_usbdrd_utmi_exit(phy);
+	switch (phy_drd->variant) {
+	case EXYNOS850_USBDRD_PHY:
+		exynos850_usbdrd_utmi_exit(phy);
+		break;
+	default:
+		dev_err(phy->dev, "Failed to recognize phy variant\n");
+	}
 
 	clk_disable_unprepare(phy_drd->clk);
 
@@ -359,6 +377,8 @@ static int exynos_usbdrd_phy_probe(struct udevice *dev)
 		return err;
 	}
 
+	phy_drd->variant = dev_get_driver_data(dev);
+
 	return 0;
 }
 
@@ -372,6 +392,7 @@ static const struct phy_ops exynos_usbdrd_phy_ops = {
 static const struct udevice_id exynos_usbdrd_phy_of_match[] = {
 	{
 		.compatible = "samsung,exynos850-usbdrd-phy",
+		.data = EXYNOS850_USBDRD_PHY,
 	},
 	{ }
 };

-- 
2.51.0