[PATCH 06/11] arm: dts: imx8m: Add remoteproc node

[Peng Fan]

Hi Tom,

On Mon, Oct 13, 2025 at 09:55:46AM -0600, Tom Rini wrote:
>On Mon, Oct 13, 2025 at 10:49:25AM +0800, Peng Fan (OSS) wrote:
>> From: Peng Fan <peng.fan at nxp.com>
>> 
>> Add CM7/4 nodes for i.MX8MQ/M/N/P.
>> 
>> Reviewed-by: Ye Li <ye.li at nxp.com>
>> Signed-off-by: Peng Fan <peng.fan at nxp.com>
>> ---
>>  arch/arm/dts/imx8mm-u-boot.dtsi | 4 ++++
>>  arch/arm/dts/imx8mn-u-boot.dtsi | 4 ++++
>>  arch/arm/dts/imx8mp-u-boot.dtsi | 4 ++++
>>  arch/arm/dts/imx8mq-u-boot.dtsi | 4 ++++
>>  4 files changed, 16 insertions(+)
>
>Why is this in the u-boot.dtsi? We have

I am preparing the Linux dts patches and will send out for reviewing.
Before those lands into Linux dts, we need that in imx8m*-u-boot.dtsi.
After linux side done, we could clean up the imx8m*-u-boot.dtsi

>dts/upstream/Bindings/remoteproc/fsl,imx-rproc.yaml and so your updates
>here should be compatible with that, yes?

Yes. Per the dt-bindings, only compatible is required and that is what
this patch added.

Thanks
Peng

>
>-- 
>Tom