[PATCH 1/1] riscv: consider CONFIG_RISCV_ISA_ZAAMO in SPL too

[E Shattow]

Hi Heinrich, thank you for your attention to this.

On 10/16/25 09:58, Heinrich Schuchardt wrote:
> Commit a681cfecb434 ("riscv: Add a Zalrsc-only alternative for
> synchronization in start.S") changed the hart synchronization in start.S.
> It uses CONFIG_IS_ENABLED(RISCV_ISA_ZAAMO) to determine which method to
> use. If the macro evaluates to true the old behavior is maintained.
> 
> The macro evaluates to false for SPL builds which was unintended. Use
> IS_ENABLED(CONFIG_RISCV_ISA_ZAAMO) instead.
> 
> This fixes a boot failure on StarFive JH7110 based boards.
> 
> Fixes: a681cfecb434 ("riscv: Add a Zalrsc-only alternative for synchronization in start.S")
> Reported-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>
> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt at canonical.com>
> ---
>  arch/riscv/cpu/start.S | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
> index 6324ff585d4..87b3ff0f93f 100644
> --- a/arch/riscv/cpu/start.S
> +++ b/arch/riscv/cpu/start.S
> @@ -151,7 +151,7 @@ call_harts_early_init:
>  	 */
>  	la	t0, hart_lottery
>  	li	t1, 1
> -#if CONFIG_IS_ENABLED(RISCV_ISA_ZAAMO)
> +#if IS_ENABLED(CONFIG_RISCV_ISA_ZAAMO)
>  	amoswap.w s2, t1, 0(t0)
>  	bnez	s2, wait_for_gd_init
>  #else
> @@ -184,7 +184,7 @@ call_harts_early_init:
>  #if !CONFIG_IS_ENABLED(XIP)
>  #ifdef CONFIG_AVAILABLE_HARTS
>  	la	t0, available_harts_lock
> -#if CONFIG_IS_ENABLED(RISCV_ISA_ZAAMO)
> +#if IS_ENABLED(CONFIG_RISCV_ISA_ZAAMO)
>  	amoswap.w.rl zero, zero, 0(t0)
>  #else
>  	fence	rw, w
> @@ -203,7 +203,7 @@ wait_for_gd_init:
>  	la	t0, available_harts_lock
>  	li	t1, 1
>  1:
> -#if CONFIG_IS_ENABLED(RISCV_ISA_ZAAMO)
> +#if IS_ENABLED(CONFIG_RISCV_ISA_ZAAMO)
>  	amoswap.w.aq t1, t1, 0(t0)
>  #else
>  	lr.w.aq	t1, 0(t0)
> @@ -219,7 +219,7 @@ wait_for_gd_init:
>  	or	t2, t2, t1
>  	SREG	t2, GD_AVAILABLE_HARTS(gp)
>  
> -#if CONFIG_IS_ENABLED(RISCV_ISA_ZAAMO)
> +#if IS_ENABLED(CONFIG_RISCV_ISA_ZAAMO)
>  	amoswap.w.rl zero, zero, 0(t0)
>  #else
>  	fence	rw, w

I confirm this restores Pine64 Star64 (JH-7110) SPL boot in origin/next

Are we reverting the bad commit or papering over it with a fix?

Ref. "Revert "riscv: Add a Zalrsc-only alternative for synchronization
in start.S":

https://lore.kernel.org/u-boot/aOylBeAxyoKuPJYa@pie/

In any event, for this patch,

Tested-by: E Shattow <e at freeshell.de>