[PATCH v3 01/10] usb: ehci-mx6: Extend support to i.MX91, i.MX93, i.MX94, and i.MX95

[alice.guo at oss.nxp.com]

From: Alice Guo <alice.guo at nxp.com>

Since the EHCI USB driver is shared across i.MX91, i.MX93, i.MX94, and
i.MX95, the condition check is updated to use IMX9.

Signed-off-by: Alice Guo <alice.guo at nxp.com>
Reviewed-by: Marek Vasut <marek.vasut at mailbox.org>
---
 drivers/usb/host/Kconfig | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2cf687fc4f3..427b62e934b 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -210,10 +210,10 @@ config USB_EHCI_MX6
 
 config USB_EHCI_MX7
 	bool "Support for i.MX7/i.MX8M/i.MX9 on-chip EHCI USB controller"
-	depends on ARCH_MX7 || IMX8M || IMX93 || IMX95
+	depends on ARCH_MX7 || IMX8M || IMX9
 	select EHCI_HCD_INIT_AFTER_RESET if ARCH_MX7
-	select PHY if IMX8M || IMX93 || IMX95
-	select NOP_PHY if IMX8M || IMX93 || IMX95
+	select PHY if IMX8M || IMX9
+	select NOP_PHY if IMX8M || IMX9
 	default y
 	---help---
 	  Enables support for the on-chip EHCI controller on i.MX7/i.MX8M/i.MX9 SoCs.

-- 
2.43.0