[PATCH v2 1/4] board: ti: common: Add generic AM6x board detection functions

[Mattijs Korpershoek]

Hi Guillaume,

Thank you for the patch.

On Fri, Oct 24, 2025 at 16:17, "Guillaume La Roque (TI.com)" <glaroque at baylibre.com> wrote:

> Add two new generic functions for AM6x family boards to simplify
> board-specific implementations:
>
> - do_board_detect_am6(): Generic board detection function that reads
>   the on-board EEPROM. It first attempts to read at the configured
>   address, and if that fails, tries the alternate address
>   (CONFIG_EEPROM_CHIP_ADDRESS + 1). This provides a common
>   implementation that can be used across different AM6x boards.
>
> - setup_serial_am6(): Sets up the serial number environment variable
>   from the EEPROM data. The serial number is converted from
>   hexadecimal string format to a 16-character hexadecimal
>   representation and stored in the "serial#" environment variable.
>
> Both functions are protected by CONFIG_IS_ENABLED(TI_I2C_BOARD_DETECT)
> and are designed to be used by AM62x, AM64x, AM65x, and other AM6x
> family boards.
>
> Signed-off-by: Guillaume La Roque (TI.com) <glaroque at baylibre.com>

Reviewed-by: Mattijs Korpershoek <mkorpershoek at kernel.org>

> ---
>  board/ti/common/board_detect.c | 43 ++++++++++++++++++++++++++++++++++++++++++
>  board/ti/common/board_detect.h | 22 +++++++++++++++++++++
>  2 files changed, 65 insertions(+)
>
> diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c
> index a43cc075b92..d49e26fa453 100644
> --- a/board/ti/common/board_detect.c
> +++ b/board/ti/common/board_detect.c
> @@ -824,3 +824,46 @@ bool __maybe_unused board_ti_was_eeprom_read(void)
>  	else
>  		return false;
>  }
> +
> +#if CONFIG_IS_ENABLED(TI_I2C_BOARD_DETECT)
> +int do_board_detect_am6(void)
> +{
> +	int ret;
> +
> +	ret = ti_i2c_eeprom_am6_get_base(CONFIG_EEPROM_BUS_ADDRESS,
> +					 CONFIG_EEPROM_CHIP_ADDRESS);
> +	if (ret) {
> +		printf("EEPROM not available at 0x%02x, trying to read at 0x%02x\n",
> +		       CONFIG_EEPROM_CHIP_ADDRESS,
> +		       CONFIG_EEPROM_CHIP_ADDRESS + 1);
> +		ret = ti_i2c_eeprom_am6_get_base(CONFIG_EEPROM_BUS_ADDRESS,
> +						 CONFIG_EEPROM_CHIP_ADDRESS +
> +							 1);
> +		if (ret)
> +			pr_err("Reading on-board EEPROM at 0x%02x failed %d\n",
> +			       CONFIG_EEPROM_CHIP_ADDRESS + 1, ret);
> +	}
> +
> +	return ret;
> +}
> +
> +void setup_serial_am6(void)
> +{
> +	struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
> +	unsigned long board_serial;
> +	char *endp;
> +	char serial_string[17] = { 0 };
> +
> +	if (env_get("serial#"))
> +		return;
> +
> +	board_serial = simple_strtoul(ep->serial, &endp, 16);
> +	if (*endp != '\0') {
> +		pr_err("Error: Can't set serial# to %s\n", ep->serial);
> +		return;
> +	}
> +
> +	snprintf(serial_string, sizeof(serial_string), "%016lx", board_serial);
> +	env_set("serial#", serial_string);
> +}
> +#endif
> diff --git a/board/ti/common/board_detect.h b/board/ti/common/board_detect.h
> index b057f3b2269..26ada2a449c 100644
> --- a/board/ti/common/board_detect.h
> +++ b/board/ti/common/board_detect.h
> @@ -313,6 +313,28 @@ int __maybe_unused ti_i2c_eeprom_am6_get(int bus_addr, int dev_addr,
>   */
>  int __maybe_unused ti_i2c_eeprom_am6_get_base(int bus_addr, int dev_addr);
>  
> +/**
> + * do_board_detect_am6() - Detect AM6x board and read EEPROM data
> + *
> + * This is a generic board detection function for AM6x family boards.
> + * It attempts to read the on-board EEPROM at the configured address,
> + * and if that fails, tries the alternate address (CONFIG_EEPROM_CHIP_ADDRESS + 1).
> + *
> + * Return: 0 on success or corresponding error on failure.
> + */
> +int do_board_detect_am6(void);
> +
> +/**
> + * setup_serial_am6() - Setup serial number environment variable for AM6x boards
> + *
> + * This function reads the serial number from the AM6x EEPROM data and
> + * sets the "serial#" environment variable. The serial number is converted
> + * from hexadecimal string format to a 16-character hexadecimal representation.
> + *
> + * EEPROM should be already read before calling this function.
> + */
> +void setup_serial_am6(void);
> +
>  #ifdef CONFIG_TI_I2C_BOARD_DETECT
>  /**
>   * board_ti_is() - Board detection logic for TI EVMs
>
> -- 
> 2.34.1