[PATCH 0/3] Add i.MX95 15x15 EVK support

[Peng Fan]

On Mon, Oct 13, 2025 at 11:41:25AM +0800, Ye Li wrote:
>The patch set adds basic support for i.MX95 15x15 LPDDR4X EVK. We share
>same board codes with i.MX95 19x19 EVK since different DTS is used.
>
>boot log:
>
>U-Boot SPL 2025.10-00455-g648db5f1a0a6-dirty (Oct 13 2025 - 10:56:03 +0800)
>SYS Boot reason: pmic, origin: -1, errid: -1
>SYS shutdown reason: pmic, origin: -1, errid: -1
>Normal Boot
>Trying to boot from MMC1
>Primary set selected
>Load image from MMC/SD 0xc4400
>NOTICE:  BL31: v2.12.0(release):android-16.0.0_1.0.0-rc2
>NOTICE:  BL31: Built : 04:04:45, Sep 10 2025
>
>
>U-Boot 2025.10-00455-g648db5f1a0a6-dirty (Oct 13 2025 - 10:56:03 +0800)
>
>CPU:   NXP i.MX95 Rev2.0 A55 at 1800 MHz
>Model: NXP i.MX95 15X15 board
>DRAM:  7.8 GiB
>Core:  280 devices, 22 uclasses, devicetree: separate
>MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
>Loading Environment from MMC... Reading from MMC(0)... *** Warning - bad CRC, using default environment
>
>PCIE-2: Link down
>In:    serial at 44380000
>Out:   serial at 44380000
>Err:   serial at 44380000
>
>BuildInfo:
>  - ELE firmware version 2.0.3-5f1204b7
>
>switch to partitions #0, OK
>mmc0(part 0) is current device
>Net:   WARNING: no MAC address assigned for MAC0
>imx_get_mac_from_fuse: fuse read err: 0
>
>Warning: enetc-0 (eth0) using random MAC address - f2:02:36:b0:80:06
>eth0: enetc-0 [PRIME]WARNING: no MAC address assigned for MAC1
>imx_get_mac_from_fuse: fuse read err: 0
>
>Warning: enetc-1 (eth1) using random MAC address - ea:ad:db:53:30:f0
>, eth1: enetc-1
>Hit any key to stop autoboot: 0
>u-boot=>
>
>Ye Li (3):
>  imx95_evk: Share the env file for both 19x19 EVK and 15x15 EVK
>  arm: dts: imx95-15x15-evk: Add -u-boot.dtsi for SPL and binman
>  imx95_evk: Add basic support for iMX95 15x15 EVK
>

For this series:

Reviewed-by: Peng Fan <peng.fan at nxp.com>