[PATCH 1/3] power: pmic: mtk-pwrap: add init capability flag

[Macpaul Lin (林智斌)]

On Fri, 2026-03-27 at 14:03 -0500, David Lechner wrote:
> Add a PWRAP_CAP_INIT capability flag to specify if it is safe to call
> pwrap_init() or not. Not all targets define the registers accessed
> by pwrap_init(). In that case, it is expected that an earlier
> bootloader
> has already initialized the PMIC. If not, we now return an error
> instead
> of trying to access undefined registers.
> 
> Signed-off-by: David Lechner <dlechner at baylibre.com>
> ---
>  drivers/power/pmic/mtk-pwrap.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/power/pmic/mtk-pwrap.c b/drivers/power/pmic/mtk-
> pwrap.c
> index 446b78fb0ee..9ff06fdb3bd 100644
> --- a/drivers/power/pmic/mtk-pwrap.c
> +++ b/drivers/power/pmic/mtk-pwrap.c
> @@ -62,6 +62,8 @@ static const struct pmic_child_info
> mt6359_pmic_children_info[] = {
>  #define PWRAP_CAP_INT1_EN		BIT(3)
>  #define PWRAP_CAP_WDT_SRC1		BIT(4)
>  #define PWRAP_CAP_ARB			BIT(5)
> +/* To implement this capability, the registers used in pwrap_init()
> must be defined. */
> +#define PWRAP_CAP_INIT			BIT(6)
>  
>  /* defines for slave device wrapper registers */
>  enum dew_regs {
> @@ -752,6 +754,11 @@ static int mtk_pwrap_probe(struct udevice *dev)
>  	 * Skip initialization here in this case.
>  	 */
>  	if (!pwrap_readl(wrp, PWRAP_INIT_DONE2)) {
> +		if (!HAS_CAP(wrp->master->caps, PWRAP_CAP_INIT)) {
> +			dev_err(dev, "initialization is required but
> not supported\n");
> +			return -ENODEV;
> +		}
> +
>  		ret = pwrap_init(wrp);
>  		if (ret) {
>  			dev_err(dev, "init failed with %d\n", ret);
> @@ -905,7 +912,7 @@ static const struct pmic_wrapper_type
> pwrap_mt8365 = {
>  	.int1_en_all = 0x0,
>  	.spi_w = PWRAP_MAN_CMD_SPI_WRITE,
>  	.wdt_src = PWRAP_WDT_SRC_MASK_ALL,
> -	.caps = PWRAP_CAP_INT1_EN | PWRAP_CAP_WDT_SRC1,
> +	.caps = PWRAP_CAP_INT1_EN | PWRAP_CAP_WDT_SRC1 |
> PWRAP_CAP_INIT,
>  };
>  
>  static const struct udevice_id mtk_pwrap_ids[] = {
> 

Reviewed-by: Macpaul Lin <macpaul.lin at mediatek.com>

Thanks!
Macpaul Lin