April 2026 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Apr 1 00:54:59 CEST 2026
Ending: Mon Apr 27 21:57:41 CEST 2026
Messages: 2625

• [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support   Randolph Sapp
  • [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support   Marko Mäkelä
    • [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support   Robert Nelson
      • [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support   Marko Mäkelä
      • [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support   Robert Nelson
      • [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support   Marko Mäkelä
• [PATCH] board: toradex: Quote variables in `test` cmd expression   Francesco Dolcini
  • [PATCH] board: toradex: Quote variables in `test` cmd expression   Tom Rini
    • [PATCH] board: toradex: Quote variables in `test` cmd expression   Francesco Dolcini
      • [PATCH] board: toradex: Quote variables in `test` cmd expression   Rasmus Villemoes
• [PATCH v2] board: ti: am62dx: Separate resource management config from am62ax   Anshul Dalal
  • [PATCH v2] board: ti: am62dx: Separate resource management config from am62ax   Tom Rini
• [PATCH v3 0/3] fwu: Call EFI stack initialization after preboot   Michal Simek
  • [PATCH v3 1/3] event: Check return value from event_notify_null()   Michal Simek
    • [PATCH v3 1/3] event: Check return value from event_notify_null()   Ilias Apalodimas
    • [v3,1/3] event: Check return value from event_notify_null()   Simon Glass
  • [PATCH v3 2/3] event: Introduce EVT_POST_PREBOOT event   Michal Simek
    • [PATCH v3 2/3] event: Introduce EVT_POST_PREBOOT event   Ilias Apalodimas
    • [v3,2/3] event: Introduce EVT_POST_PREBOOT event   Simon Glass
  • [PATCH v3 3/3] fwu: Move boottime checks to EVT_POST_PREBOOT   Michal Simek
    • [v3,3/3] fwu: Move boottime checks to EVT_POST_PREBOOT   Simon Glass
• [PATCH] .mailmap: Fix Jerome's entry   Michal Simek
  • [PATCH] .mailmap: Fix Jerome's entry   Jerome Forissier
    • [PATCH] .mailmap: Fix Jerome's entry   Michal Simek
      • [PATCH] .mailmap: Fix Jerome's entry   Jerome Forissier
      • [PATCH] .mailmap: Fix Jerome's entry   Simon Glass
  • [PATCH] .mailmap: Fix Jerome's entry   Tom Rini
• [PATCH v2 3/4] fdtdec: Introduce fdtdec_setup_ram_size() to determine the memory size   Ilias Apalodimas
  • [PATCH v2 3/4] fdtdec: Introduce fdtdec_setup_ram_size() to determine the memory size   Anshul Dalal
  • [PATCH v2 3/4] fdtdec: Introduce fdtdec_setup_ram_size() to determine the memory size   Marek Vasut
    • [PATCH v2 3/4] fdtdec: Introduce fdtdec_setup_ram_size() to determine the memory size   Ilias Apalodimas
      • [PATCH v2 3/4] fdtdec: Introduce fdtdec_setup_ram_size() to determine the memory size   Marek Vasut
      • [PATCH v2 3/4] fdtdec: Introduce fdtdec_setup_ram_size() to determine the memory size   Ilias Apalodimas
• [PATCH v2 4/4] common: Allow relocations on the top of the last bank   Ilias Apalodimas
  • [PATCH v2 4/4] common: Allow relocations on the top of the last bank   Jonas Karlman
    • [PATCH v2 4/4] common: Allow relocations on the top of the last bank   Ilias Apalodimas
      • [PATCH v2 4/4] common: Allow relocations on the top of the last bank   Jonas Karlman
      • [PATCH v2 4/4] common: Allow relocations on the top of the last bank   Ilias Apalodimas
      • [PATCH v2 4/4] common: Allow relocations on the top of the last bank   Ilias Apalodimas
  • [PATCH v2 4/4] common: Allow relocations on the top of the last bank   Anshul Dalal
    • [PATCH v2 4/4] common: Allow relocations on the top of the last bank   Ilias Apalodimas
• u-boot unsub   조만재
• [PATCH] ARM: stm32mp2: Factorize TAMP_FWU_BOOT_IDX_MASK/OFFSET definition   Patrice Chotard
• [PATCH 1/4] imx8mp: phyboard-pollux-rdk: Convert to DM_PMIC   Frieder Schrempf
  • [PATCH 1/4] imx8mp: phyboard-pollux-rdk: Convert to DM_PMIC   Peng Fan
• [PATCH 1/4] ls1028ardb: adjust env settings for unified boot.scr   chunguang.li_2 at nxp.com
  • [PATCH 2/4] ls1043ardb: refactor EXTRA_ENV_SETTINGS and add board-specific overrides   chunguang.li_2 at nxp.com
    • [PATCH 2/4] ls1043ardb: refactor EXTRA_ENV_SETTINGS and add board-specific overrides   Tom Rini
  • [PATCH 3/4] ls1046ardb: refactor EXTRA_ENV_SETTINGS and add board-specific overrides   chunguang.li_2 at nxp.com
  • [PATCH 4/4] lx2160ardb: update env setting for unified boot.scr   chunguang.li_2 at nxp.com
• [PATCH] cli: flush stdin before enabling cli   Quentin Schulz
  • [PATCH] cli: flush stdin before enabling cli   Gregor Herburger
  • [PATCH] cli: flush stdin before enabling cli   Gregor Herburger
  • [PATCH] cli: flush stdin before enabling cli   Quentin Schulz
• [PATCH] board: adi: Fix exception when using standalone SoM   Philip Molloy
  • [PATCH] board: adi: Fix exception when using standalone SoM   Greg Malysa
  • [PATCH] board: adi: Fix exception when using standalone SoM   Tom Rini
• [PATCH] clk: stm32: Add STM32MP23 support   Patrice Chotard
  • [Uboot-stm32] [PATCH] clk: stm32: Add STM32MP23 support   Raphaël Gallais-Pou
• [PATCH] spi: add STM32MP23 OSPI support   Patrice Chotard
• [PATCH v2 1/4] fdtdec: Deduplicate iterator function   Anshul Dalal
• [PATCH v2 0/4] Relocate U-Boot in the last bank   Anshul Dalal
• [PATCH v2 2/4] fdtdec: Introduce fdtdec_setup_mem_ram_top() to determine end of topmost DRAM bank   Anshul Dalal
• [PATCH v2 1/2] console: add console_flush_stdin()   Gregor Herburger
  • [PATCH v2 2/2] cli: flush stdin before enabling cli   Gregor Herburger
    • [v2,2/2] cli: flush stdin before enabling cli   Simon Glass
      • [v2,2/2] cli: flush stdin before enabling cli   Gregor Herburger
      • [v2,2/2] cli: flush stdin before enabling cli   Simon Glass
  • [PATCH v2 1/2] console: add console_flush_stdin()   Sverdlin, Alexander
  • [PATCH v2 1/2] console: add console_flush_stdin()   Quentin Schulz
  • [v2,1/2] console: add console_flush_stdin()   Simon Glass
• [PATCH v2 1/4] imx8mp: phyboard-pollux-rdk: Convert to DM_PMIC   Teresa Remmet
• [PATCH v2 3/4] imx8mp: libra-fpsc: Convert to DM_PMIC   Teresa Remmet
• [PATCH v2 00/11] Linux compat improvements and CCF prep   Casey Connolly
  • [PATCH v2 02/11] common: add an option to skip DM pre-relocation   Casey Connolly
  • [PATCH v2 03/11] string: add strdup_const and kstrdup_const   Casey Connolly
  • [PATCH v2 04/11] ofnode: add read_u64_array and count_elems_of_size   Casey Connolly
  • [PATCH v2 05/11] compat: add PTR_ERR_OR_ZERO   Casey Connolly
  • [PATCH v2 06/11] compat: add kref implementation   Casey Connolly
  • [PATCH v2 07/11] compat: add dev_name()   Casey Connolly
  • [PATCH v2 08/11] compat: add linux/regmap.h symlink   Casey Connolly
  • [PATCH v2 09/11] regmap: add regmap_assign_bits   Casey Connolly
  • [PATCH v2 10/11] compat: regulator: add enable/disable macros   Casey Connolly
  • [PATCH v2 11/11] compat: math64: add abs_diff()   Casey Connolly
  • [PATCH v2 00/11] Linux compat improvements and CCF prep   Tom Rini
• [PATCH v2 01/11] vsprintf: add %pOF   Casey Connolly
  • [PATCH v2 01/11] vsprintf: add %pOF   Tom Rini
• [PATCH v1] configs: aquila-am69: Set ENV_MMC_EMMC_HW_PARTITION and ENV_RELOC_GD_ENV_ADDR   Francesco Dolcini
  • [PATCH v1] configs: aquila-am69: Set ENV_MMC_EMMC_HW_PARTITION and ENV_RELOC_GD_ENV_ADDR   Vitor Soares
    • [PATCH v1] configs: aquila-am69: Set ENV_MMC_EMMC_HW_PARTITION and ENV_RELOC_GD_ENV_ADDR   Tom Rini
• [PATCH v2 0/7] clk: prepare for adding Linux CCF port   Casey Connolly
  • [PATCH v2 2/7] clk: move U-Boot CCF to clk/uccf   Casey Connolly
  • [PATCH v2 3/7] clk: rename clk_ops to clk_ops_uboot   Casey Connolly
  • [PATCH v2 4/7] clk: move fixed clocks to clk/basic   Casey Connolly
  • [PATCH v2 5/7] clk: make clk_set_rate() return signed long   Casey Connolly
  • [PATCH v2 6/7] clk: make clk_get_parent_rate return signed long   Casey Connolly
  • [PATCH v2 7/7] clk: compat: add clk (un)prepare and associated functions   Casey Connolly
• [PATCH v2 1/7] clk: restrict clk/imx to MACH_IMX   Casey Connolly
• [PATCH v2 2/4] imx8mp: verdin: Convert to DM_PMIC   Ernest Van Hoecke
• [PATCH 0/3] drivers: net: fsl-mc: add the nowait option for apply dpl   Ioana Ciornei
  • [PATCH 2/3] drivers: net: fsl-mc: cleanup the fsl_mc command help text   Ioana Ciornei
  • [PATCH 3/3] drivers: net: fsl-mc: add the nowait option when applying the DPL   Ioana Ciornei
  • [PATCH 0/3] drivers: net: fsl-mc: add the nowait option for apply dpl   Peng Fan (OSS)
• [PATCH 1/3] drivers: net: fsl-mc: remove unused parameter from the wait_for_mc() function   Ioana Ciornei
• [PATCH 1/3] tools: binman: Test signing an encrypted FIT with a preload header   yan wang
  • [PATCH 2/3] binman: Generate the preload header and sign the data only once   yan wang
    • [2/3] binman: Generate the preload header and sign the data only once   Simon Glass
      • [2/3] binman: Generate the preload header and sign the data only once   Paul HENRYS
  • [PATCH 3/3] binman: etype: collection: Set build_done on the referenced entries   yan wang
    • [3/3] binman: etype: collection: Set build_done on the referenced entries   Simon Glass
  • [1/3] tools: binman: Test signing an encrypted FIT with a preload header   Simon Glass
• rk3399 u-boot docs - arm tf-a compilation failure   andrew at internet-e-mail.com
  • rk3399 u-boot docs - arm tf-a compilation failure   Peter Robinson
• [PATCH 1/4] arm64: imx8mp: Fold inline ECC into spl.c on DH i.MX8MP DHCOM SoM   Marek Vasut
  • [PATCH 3/4] arm64: imx8mp: Deduplicate 2G and 4G 2r DRAM timings on DH i.MX8MP DHCOM SoM   Marek Vasut
  • [PATCH 4/4] arm64: imx8mp: Add 4G 1r DRAM timings on DH i.MX8MP DHCOM SoM   Marek Vasut
  • [PATCH 1/4] arm64: imx8mp: Fold inline ECC into spl.c on DH i.MX8MP DHCOM SoM   Marek Vasut
    • [PATCH 2/4] arm64: imx8mp: Deduplicate DRAM size tables on DH i.MX8MP DHCOM SoM   Marek Vasut
    • [PATCH 3/4] arm64: imx8mp: Deduplicate 2G and 4G 2r DRAM timings on DH i.MX8MP DHCOM SoM   Marek Vasut
    • [PATCH 4/4] arm64: imx8mp: Add 4G 1r DRAM timings on DH i.MX8MP DHCOM SoM   Marek Vasut
  • [PATCH 1/4] arm64: imx8mp: Fold inline ECC into spl.c on DH i.MX8MP DHCOM SoM   Fabio Estevam
• [PATCH 2/4] arm64: imx8mp: Deduplicate DRAM size tables on DH i.MX8MP DHCOM SoM   Marek Vasut
• [v2,1/4] fdtdec: Deduplicate iterator function   Simon Glass
• [v2,2/4] fdtdec: Introduce fdtdec_setup_mem_ram_top() to determine end of topmost DRAM bank   Simon Glass
• [v2,3/4] fdtdec: Introduce fdtdec_setup_ram_size() to determine the memory size   Simon Glass
• [v2,4/4] common: Allow relocations on the top of the last bank   Simon Glass
  • [v2,4/4] common: Allow relocations on the top of the last bank   Ilias Apalodimas
• [PATCH] arch/x86/lib: implement cmdline configuration property   Guillaume Ranquet
  • arch/x86/lib: implement cmdline configuration property   Simon Glass
• [PATCH 0/3] arm: mediatek: mt8189: enable USB support   David Lechner
  • [PATCH 1/3] phy: mediatek: new XS-PHY driver   David Lechner
    • [PATCH 1/3] phy: mediatek: new XS-PHY driver   Arnaud Ferraris
  • [PATCH 2/3] arm: dts: mediatek: add USB/PHY nodes for Genio 520/720   David Lechner
  • [PATCH 3/3] configs: mediatek: mt8189: enable USB support   David Lechner
    • [PATCH 3/3] configs: mediatek: mt8189: enable USB support   Macpaul Lin (林智斌)
  • [PATCH 0/3] arm: mediatek: mt8189: enable USB support   David Lechner
• [v3,02/15] ecdsa: initial support of ecdsa using mbedtls   Simon Glass
• [v3,03/15] test: lib: ecdsa: add initial test   Simon Glass
• [PATCH v3] Add support for OpenSSL Provider API   Eddie Kovsky
  • [PATCH v3] Add support for OpenSSL Provider API   Tom Rini
    • [PATCH v3] Add support for OpenSSL Provider API   Eddie Kovsky
      • [PATCH v3] Add support for OpenSSL Provider API   Tom Rini
• [v3,05/15] ecdsa: fix support of secp521r1   Simon Glass
• [v3,06/15] test: dm: ecdsa.c: clean this test as software ecdsa is now implemented   Simon Glass
• [v3,07/15] test: py: vboot: prepare integration test for ecdsa   Simon Glass
• [v3,08/15] test: vboot: add test for ecdsa   Simon Glass
• [v3,09/15] tools: mkimage: pre-load: add support of ecdsa   Simon Glass
• [v3,10/15] tools: binman: pre-load: add support of ecdsa   Simon Glass
• [v3,11/15] tools: binman: pre-load: add test for ecdsa   Simon Glass
• [v3,12/15] boot: pre-load: add support of ecdsa   Simon Glass
• [v3,13/15] tools: preload_check_sign: add support of ecdsa   Simon Glass
• [v3,14/15] test: py: vboot: prepare test for glocal signature with ecdsa   Simon Glass
• [v3, 15/15] test: py: vboot: add test for global signature with ecdsa   Simon Glass
• [v3,00/15] add software ecdsa support   Simon Glass
• [v4,0/5] misc: fs_loader: reorg and split to FS and FW loader + FIP loader   Simon Glass
• [v4, 2/5] misc: fs_loader: reorganize and split to FS and FW loader   Simon Glass
• [v4, 3/5] misc: fw_loader: implement generic get_fw_loader_from_node()   Simon Glass
• [v4,4/5] misc: fw_loader: introduce FIP loader driver   Simon Glass
• [v4,5/5] misc: fw_loader: implement request_firmware_size() OP   Simon Glass
• [PATCH 00/17] arm: mediatek: clean up init code   David Lechner
• Need help with FDT overlay   Simon Glass
  • [PATCH] doc: Fix fdt resize argument in fdt_overlays.rst   Matwey V. Kornilov
    • [PATCH] doc: Fix fdt resize argument in fdt_overlays.rst   Simon Glass
• [PATCH v2 0/6] configs: mediatek: rename genio boards defconfigs to match the device tree name   David Lechner
• [PATCH 0/6] various memory related fixups   rs at ti.com
  • [PATCH 1/6] lmb: add LMB_FDT for fdt reserved regions   rs at ti.com
    • [PATCH 1/6] lmb: add LMB_FDT for fdt reserved regions   Randolph Sapp
  • [PATCH 2/6] efi_dt_fixup: use fdtdec_get_bool   rs at ti.com
    • [PATCH 2/6] efi_dt_fixup: use fdtdec_get_bool   Ilias Apalodimas
  • [PATCH 3/6] efi_selftest_memory: check for duplicates first   rs at ti.com
  • [PATCH 4/6] efi_memory: nitpick removal loop   rs at ti.com
    • [PATCH 4/6] efi_memory: nitpick removal loop   Ilias Apalodimas
      • [PATCH 4/6] efi_memory: nitpick removal loop   Randolph Sapp
      • [PATCH 4/6] efi_memory: nitpick removal loop   Ilias Apalodimas
      • [PATCH 4/6] efi_memory: nitpick removal loop   Randolph Sapp
  • [PATCH 5/6] efi_memory: backfill EFI_CONVENTIONAL_MEMORY   rs at ti.com
    • [PATCH 5/6] efi_memory: backfill EFI_CONVENTIONAL_MEMORY   Ilias Apalodimas
      • [PATCH 5/6] efi_memory: backfill EFI_CONVENTIONAL_MEMORY   Randolph Sapp
      • [PATCH 5/6] efi_memory: backfill EFI_CONVENTIONAL_MEMORY   Randolph Sapp
      • [PATCH 5/6] efi_memory: backfill EFI_CONVENTIONAL_MEMORY   Ilias Apalodimas
      • [PATCH 5/6] efi_memory: backfill EFI_CONVENTIONAL_MEMORY   Randolph Sapp
  • [PATCH 6/6] memory: reserve from start_addr_sp to relocaddr   rs at ti.com
    • [PATCH 6/6] memory: reserve from start_addr_sp to relocaddr   Ilias Apalodimas
      • [PATCH 6/6] memory: reserve from start_addr_sp to relocaddr   Randolph Sapp
• [RFC PATCH v1 0/2] Add Rockchip USBPHY DM driver   Johan Jonker
  • [RFC PATCH v1 1/2] phy: rockchip: add phy-rockchip-usb2.c   Johan Jonker
  • [RFC PATCH v1 2/2] usb: phy: remove rockchip_usb2_phy.c   Johan Jonker
• [PATCH 0/4] fit: dm-verity support   Daniel Golle
  • [PATCH 1/4] image: fit: add dm-verity property name constants   Daniel Golle
    • [1/4] image: fit: add dm-verity property name constants   Simon Glass
  • [PATCH 2/4] boot: fit: support generating DM verity cmdline parameters   Daniel Golle
    • [2/4] boot: fit: support generating DM verity cmdline parameters   Simon Glass
  • [PATCH 3/4] tools: mkimage: add dm-verity Merkle-tree generation   Daniel Golle
  • [PATCH 4/4] doc: fit: add dm-verity boot parameter documentation   Daniel Golle
• [PATCH v6 07/12] video: rockchip: vop2: Add video bridge support   Dang Huynh
• [PATCH v2 1/4] ls1028ardb: add env variables to assist boot   chunguang.li_2 at nxp.com
  • [PATCH v2 2/4] ls1043a: add env variables to assist boot   chunguang.li_2 at nxp.com
  • [PATCH v2 3/4] ls1046a: add env variables to assist boot   chunguang.li_2 at nxp.com
  • [PATCH v2 4/4] lx2160ardb: add env variables to assist boot   chunguang.li_2 at nxp.com
  • (subset) [PATCH v2 1/4] ls1028ardb: add env variables to assist boot   Peng Fan (OSS)
• [PATCH v1 0/2] Add support for StarFive VisionFive 2 Lite eMMC board   Hal Feng
  • [PATCH v1 2/2] board: starfive: visionfive2: Support VisionFive 2 Lite eMMC   Hal Feng
  • [PATCH v1 0/2] Add support for StarFive VisionFive 2 Lite eMMC board   Hal Feng
  • [PATCH v1 0/2] Add support for StarFive VisionFive 2 Lite eMMC board   E Shattow
• [PATCH v1 1/2] configs: visionfive2: Add VisionFive 2 Lite eMMC DT to OF_LIST   Hal Feng
• [PATCH v3 0/6] imx9{4,5,52}: Add Quickboot support   Simona Toaca (OSS)
  • [PATCH v3 1/6] imx9: Add support for saving DDR training data to NVM   Simona Toaca (OSS)
    • [PATCH v3 1/6] imx9: Add support for saving DDR training data to NVM   Marek Vasut
    • [PATCH v3 1/6] imx9: Add support for saving DDR training data to NVM   Simon Glass
      • [PATCH v3 1/6] imx9: Add support for saving DDR training data to NVM   Simona Toaca
      • [PATCH v3 1/6] imx9: Add support for saving DDR training data to NVM   Simon Glass
      • [PATCH v3 1/6] imx9: Add support for saving DDR training data to NVM   Simona Toaca
      • [PATCH v3 1/6] imx9: Add support for saving DDR training data to NVM   Simon Glass
  • [PATCH v3 2/6] arm: mach-imx: Add command to expose QB functionality   Simona Toaca (OSS)
    • [PATCH v3 2/6] arm: mach-imx: Add command to expose QB functionality   Marek Vasut
  • [PATCH v3 3/6] configs: imx9{43, 5}: Enable SPI SFDP support   Simona Toaca (OSS)
    • [PATCH v3 3/6] configs: imx9{43, 5}: Enable SPI SFDP support   Marek Vasut
  • [PATCH v3 4/6] board: nxp: imx9{4, 5, 52}_evk: Add qb save option in SPL   Simona Toaca (OSS)
    • [PATCH v3 4/6] board: nxp: imx9{4,5,52}_evk: Add qb save option in SPL   Marek Vasut
  • [PATCH v3 5/6] doc: board: nxp: Add Quickboot documentation   Simona Toaca (OSS)
    • [PATCH v3 5/6] doc: board: nxp: Add Quickboot documentation   Marek Vasut
    • [PATCH v3 5/6] doc: board: nxp: Add Quickboot documentation   Fabio Estevam
  • [PATCH v3 6/6] drivers: ddr: imx: Fix Kconfig for SAVED_DRAM_TIMING_BASE   Simona Toaca (OSS)
    • [PATCH v3 6/6] drivers: ddr: imx: Fix Kconfig for SAVED_DRAM_TIMING_BASE   Marek Vasut
• [PATCH] Revert "usb: cdns3: use VBUS Valid to determine role for dr_mode OTG"   Siddharth Vadapalli
  • [PATCH] Revert "usb: cdns3: use VBUS Valid to determine role for dr_mode OTG"   Marek Vasut
  • [PATCH] Revert "usb: cdns3: use VBUS Valid to determine role for dr_mode OTG"   Marek Vasut
  • [PATCH] Revert "usb: cdns3: use VBUS Valid to determine role for dr_mode OTG"   Tom Rini
• [v3,01/15] mbedtls: enable support of ecc   Simon Glass
• [v3,04/15] drivers: crypto: add software ecdsa support   Simon Glass
• [PATCH V2] board: dhelectronics: imx: Use second Ethernet MAC also from fuse   Christoph Niedermaier
  • [PATCH V2] board: dhelectronics: imx: Use second Ethernet MAC also from fuse   Marek Vasut
    • [PATCH V2] board: dhelectronics: imx: Use second Ethernet MAC also from fuse   Christoph Niedermaier
• [RESEND v2 00/13] sc5xx Environment Cleanup and Fixes   Caleb Ethridge
  • [RESEND v2 01/13] configs: sc5xx: Do not store environment in SPI flash   Caleb Ethridge
  • [RESEND v2 02/13] mach-sc5xx: Remove update commands from default environment   Caleb Ethridge
  • [RESEND v2 03/13] mach-sc5xx: Update boot commands   Caleb Ethridge
  • [RESEND v2 04/13] mach-sc5xx: Switch from tftp to wget   Caleb Ethridge
  • [RESEND v2 05/13] mach-sc5xx: Add USB boot command   Caleb Ethridge
  • [RESEND v2 06/13] mach-sc5xx: Remove preliminary binman support   Caleb Ethridge
  • [RESEND v2 07/13] dts: sc594: Fix gige-reset line on EZKIT   Caleb Ethridge
  • [RESEND v2 08/13] mach-sc5xx: sc573: Rename EZKIT board to EZLITE   Caleb Ethridge
  • [RESEND v2 09/13] mach-sc5xx: Update image load address   Caleb Ethridge
  • [RESEND v2 10/13] mach-sc5xx: Update SPI bootargs for ubifs   Caleb Ethridge
  • [RESEND v2 11/13] configs: sc5xx: Set default bootcmd to SPI boot   Caleb Ethridge
  • [RESEND v2 12/13] arm: sc5xx: remove LOADADDR and use kernel_addr_r   Caleb Ethridge
    • [RESEND v2 12/13] arm: sc5xx: remove LOADADDR and use kernel_addr_r   Greg Malysa
      • [RESEND v2 12/13] arm: sc5xx: remove LOADADDR and use kernel_addr_r   Caleb Ethridge
      • [RESEND v2 12/13] arm: sc5xx: remove LOADADDR and use kernel_addr_r   Greg Malysa
  • [RESEND v2 13/13] arm: sc5xx: add missing boot env selectors   Caleb Ethridge
• [PATCH v4 0/3] fwu: Call EFI stack initialization after preboot   Michal Simek
  • [PATCH v4 1/3] event: Check return value from event_notify_null()   Michal Simek
  • [PATCH v4 2/3] event: Introduce EVT_POST_PREBOOT event   Michal Simek
  • [PATCH v4 3/3] fwu: Move boottime checks to EVT_POST_PREBOOT   Michal Simek
    • [v4,3/3] fwu: Move boottime checks to EVT_POST_PREBOOT   Simon Glass
• [GIT PULL] Please pull u-boot-imx-next-20260402   Fabio Estevam
  • [GIT PULL] Please pull u-boot-imx-next-20260402   Tom Rini
• [0/4] fit: dm-verity support   Simon Glass
• [PATCH v3 0/8] Add support for TQMa7x   Fabio Estevam
  • [PATCH v3 0/8] Add support for TQMa7x   Feilke, Alexander
• [3/4] tools: mkimage: add dm-verity Merkle-tree generation   Simon Glass
• [4/4] doc: fit: add dm-verity boot parameter documentation   Simon Glass
• [PATCH] s5p4418_nanopi2: Drop unnecessary BOARD_EARLY_INIT_F usage   Stefan Bosch
• [PATCH v1] misc: fs_loader: Add QSPI RAW partition loading support   Tom Rini
  • [PATCH v1] misc: fs_loader: Add QSPI RAW partition loading support   NG, BOON KHAI
• [PATCH 0/1] arm: dts: add/fix I2C controllers for sc5xx   Jie Zhang
  • [PATCH 1/1] arm: dts: add/fix I2C controllers for sc5xx   Jie Zhang
    • [PATCH 1/1] arm: dts: add/fix I2C controllers for sc5xx   Tom Rini
• cmd: test: add bug-compatibility special case for 'test -n'   Simon Glass
• [PATCH] env: flash: add catch-all for unrecognized flags in env_flash_init()   Tom Rini
• [PATCH] serial: pl011: Remove legacy serial driver options   Tom Rini
• [PATCH] arm: relocate: Make data-only relocation mode non-user-configurable   Tom Rini
• [PATCH v2 1/3] tools: binman: Test signing an encrypted FIT with a preload header   yan wang
  • [PATCH v2 2/3] binman: Generate preload header and sign data only once   yan wang
    • [PATCH v2 2/3] binman: Generate preload header and sign data only once   Simon Glass
  • [PATCH v2 3/3] binman: collection: Set build_done on referenced entries   yan wang
    • [PATCH v2 3/3] binman: collection: Set build_done on referenced entries   Simon Glass
  • [PATCH v2 1/3] tools: binman: Test signing an encrypted FIT with a preload header   Tom Rini
  • [PATCH v3 1/3] tools: binman: Test signing an encrypted FIT with a preload header   Paul HENRYS
    • [PATCH v3 2/3] binman: Generate preload header and sign data only once   Paul HENRYS
    • [PATCH v3 3/3] binman: collection: Set build_done on referenced entries   Paul HENRYS
    • [PATCH v3 1/3] tools: binman: Test signing an encrypted FIT with a preload header   Paul HENRYS
      • [PATCH v3 1/3] tools: binman: Test signing an encrypted FIT with a preload header   Tom Rini
    • [PATCH v4 1/3] tools: binman: Test signing an encrypted FIT with a preload header   Paul HENRYS
      • [PATCH v4 1/3] tools: binman: Test signing an encrypted FIT with a preload header   Simon Glass
    • [PATCH v4 2/3] binman: Generate preload header and sign data only once   Paul HENRYS
      • [PATCH v4 2/3] binman: Generate preload header and sign data only once   Simon Glass
    • [PATCH v4 3/3] binman: collection: Set build_done on referenced entries   Paul HENRYS
      • [PATCH v4 3/3] binman: collection: Set build_done on referenced entries   Simon Glass
      • [PATCH v5 0/3] binman: Fix preload signing with encrypted FIT   Paul HENRYS
      • [PATCH v5 1/3] binman: Generate preload header and sign data only once   Paul HENRYS
      • [PATCH v5 1/3] binman: Generate preload header and sign data only once   Simon Glass
      • [PATCH v5 2/3] binman: collection: Set build_done on referenced entries   Paul HENRYS
      • [PATCH v5 2/3] binman: collection: Set build_done on referenced entries   Simon Glass
      • [PATCH v6 0/3] binman: Fix preload signing with encrypted FIT   Yan WANG
      • [PATCH v6 1/3] binman: Generate preload header and sign data only once   Yan WANG
      • [PATCH v6 1/3] binman: Generate preload header and sign data only once   Simon Glass
      • [PATCH v6 2/3] binman: collection: Set build_done on referenced entries   Yan WANG
      • [PATCH v6 2/3] binman: collection: Set build_done on referenced entries   Simon Glass
      • [PATCH v7 0/3] binman: Fix preload signing with encrypted FIT   Yan WANG
      • [PATCH v7 1/3] binman: Generate preload header and sign data only once   Yan WANG
      • [PATCH v7 1/3] binman: Generate preload header and sign data only once   Simon Glass
      • [PATCH v7 2/3] binman: collection: Set build_done on referenced entries   Yan WANG
      • [PATCH v7 2/3] binman: collection: Set build_done on referenced entries   Simon Glass
      • [PATCH v7 3/3] tools: binman: Test signing an encrypted FIT with a preload header   Yan WANG
      • [PATCH v7 3/3] tools: binman: Test signing an encrypted FIT with a preload header   Simon Glass
      • [PATCH v6 3/3] tools: binman: Test signing an encrypted FIT with a preload header   Yan WANG
      • [PATCH v6 3/3] tools: binman: Test signing an encrypted FIT with a preload header   Simon Glass
      • [PATCH v5 3/3] tools: binman: Test signing an encrypted FIT with a preload header   Paul HENRYS
      • [PATCH v5 3/3] tools: binman: Test signing an encrypted FIT with a preload header   Simon Glass
• [PATCH] virtio: add support for SIZE_MAX & SEG_MAX features   Simon Glass
  • [PATCH] virtio: add support for SIZE_MAX & SEG_MAX features   Tom Rini
    • [PATCH] virtio: add support for SIZE_MAX & SEG_MAX features   Christian Pötzsch
• [RFC PATCH 2/3] virtio: mmio: endian *fixes* *HACK*   Kuan-Wei Chiu
  • [RFC PATCH 2/3] virtio: mmio: endian *fixes* *HACK*   Daniel Palmer
• [PATCH] linker_lists.h: drop never used ll_start, ll_end macros   Simon Glass
  • [PATCH] linker_lists.h: drop never used ll_start, ll_end macros   Tom Rini
• [PATCHv2 0/5] various memory related fixups   rs at ti.com
  • [PATCHv2 1/5] lmb: add LMB_FDT for fdt reserved regions   rs at ti.com
    • [PATCHv2 1/5] lmb: add LMB_FDT for fdt reserved regions   Randolph Sapp
    • [PATCHv2 1/5] lmb: add LMB_FDT for fdt reserved regions   Heinrich Schuchardt
  • [PATCHv2 2/5] efi_dt_fixup: use fdtdec_get_bool   rs at ti.com
    • [PATCHv2 2/5] efi_dt_fixup: use fdtdec_get_bool   Anshul Dalal
    • [PATCHv2 2/5] efi_dt_fixup: use fdtdec_get_bool   Heinrich Schuchardt
      • [PATCHv2 2/5] efi_dt_fixup: use fdtdec_get_bool   Ilias Apalodimas
  • [PATCHv2 3/5] efi_selftest_memory: check for duplicates first   rs at ti.com
  • [PATCHv2 4/5] efi_mem_sort: skip unnecessary compare   rs at ti.com
    • [PATCHv2 4/5] efi_mem_sort: skip unnecessary compare   Heinrich Schuchardt
      • [PATCHv2 4/5] efi_mem_sort: skip unnecessary compare   Randolph Sapp
  • [PATCHv2 5/5] memory: reserve from start_addr_sp to end_addr_sp   rs at ti.com
• [PATCH] boot/fit: remove useless else branch   Simon Glass
• [PATCH v2 0/9] MT8195: add ufs support   David Lechner
  • [PATCH v2 0/9] MT8195: add ufs support   David Lechner
• [PATCH] cmd: test: add bug-compatibility special case for 'test -n'   Tom Rini
• [PATCH v1 0/9] SoCFPGA: Update Boot Support for Stratix10 in U-Boot   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 1/9] arch: arm: dts: stratix10: Switch to using upstream Linux DT config   alif.zakuan.yuslaimi at altera.com
    • [PATCH v1 1/9] arch: arm: dts: stratix10: Switch to using upstream Linux DT config   Chee, Tien Fong
    • [PATCH v1 1/9] arch: arm: dts: stratix10: Switch to using upstream Linux DT config   Chee, Tien Fong
  • [PATCH v1 2/9] configs: stratix10: Combine defconfig for all boot flashes   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 3/9] arm: socfpga: Move firmware register settings from source code to device tree   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 4/9] arm: socfpga: Update Stratix10 SPL data save and restore implementation   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 5/9] arm: socfpga: s10: Enable system manager driver for Stratix10   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 6/9] ddr: altera: soc64: Add secure region support for ATF flow   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 7/9] clk: s10: Refactor S10 clock driver   alif.zakuan.yuslaimi at altera.com
    • [PATCH v1 7/9] clk: s10: Refactor S10 clock driver   Chee, Tien Fong
  • [PATCH v1 8/9] mmc: socfpga_dw_mmc: Exclude S10 from legacy clkmgr address retrieval   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 9/9] spl: s10: Enhance watchdog support in SPL for Stratix 10   alif.zakuan.yuslaimi at altera.com
    • [PATCH v1 9/9] spl: s10: Enhance watchdog support in SPL for Stratix 10   Chee, Tien Fong
• [PATCH v1 0/4] Relocate U-Boot in the last bank   Ilias Apalodimas
  • [PATCH v1 1/4] treewide: move bi_dram[] from bd to gd   Ilias Apalodimas
    • [PATCH v1 1/4] treewide: move bi_dram[] from bd to gd   Anshul Dalal
      • [PATCH v1 1/4] treewide: move bi_dram[] from bd to gd   Ilias Apalodimas
  • [PATCH v1 2/4] common: move ram_base calculation to independent INITCALL()   Ilias Apalodimas
    • [PATCH v1 2/4] common: move ram_base calculation to independent INITCALL()   Marek Vasut
      • [PATCH v1 2/4] common: move ram_base calculation to independent INITCALL()   Tom Rini
      • [PATCH v1 2/4] common: move ram_base calculation to independent INITCALL()   Marek Vasut
      • [PATCH v1 2/4] common: move ram_base calculation to independent INITCALL()   Tom Rini
      • [PATCH v1 2/4] common: move ram_base calculation to independent INITCALL()   Ilias Apalodimas
    • [PATCH v1 2/4] common: move ram_base calculation to independent INITCALL()   Simon Glass
  • [PATCH v1 3/4] common: Clean up setup_dest_addr()   Ilias Apalodimas
    • [PATCH v1 3/4] common: Clean up setup_dest_addr()   Simon Glass
      • [PATCH v1 3/4] common: Clean up setup_dest_addr()   Ilias Apalodimas
  • [PATCH v1 4/4] common: Add an optionto relocate on ram top   Ilias Apalodimas
    • [PATCH v1 4/4] common: Add an optionto relocate on ram top   Ilias Apalodimas
    • [PATCH v1 4/4] common: Add an optionto relocate on ram top   Marek Vasut
    • [PATCH v1 4/4] common: Add an optionto relocate on ram top   Simon Glass
      • [PATCH v1 4/4] common: Add an optionto relocate on ram top   Ilias Apalodimas
    • [PATCH v1 4/4] common: Add an optionto relocate on ram top   Anshul Dalal
      • [PATCH v1 4/4] common: Add an optionto relocate on ram top   Ilias Apalodimas
  • [v1,0/4] Relocate U-Boot in the last bank   Simon Glass
  • [PATCH v1 0/4] Relocate U-Boot in the last bank   Anshul Dalal
    • [PATCH v1 0/4] Relocate U-Boot in the last bank   Ilias Apalodimas
• [PATCH 0/3] Enable ENETC on i.MX952 EVK   alice.guo at oss.nxp.com
  • [PATCH v1 1/3] net: fsl_enetc: fix the duplex setting on the iMX platform   alice.guo at oss.nxp.com
  • [PATCH v1 2/3] net: fsl_enetc: Add support for i.MX952   alice.guo at oss.nxp.com
  • [PATCH v1 3/3] imx952_evk: Enable ENETC0   alice.guo at oss.nxp.com
    • [PATCH v1 3/3] imx952_evk: Enable ENETC0   Fabio Estevam
      • 回复: [EXT] Re: [PATCH v1 3/3] imx952_evk: Enable ENETC0   Alice Guo
      • [EXT] Re: [PATCH v1 3/3] imx952_evk: Enable ENETC0   Fabio Estevam
• [PATCH] efi_loader: support EFI_OS_INDICATIONS_BOOT_TO_FW_UI   Heinrich Schuchardt
  • [PATCH] efi_loader: support EFI_OS_INDICATIONS_BOOT_TO_FW_UI   Ilias Apalodimas
  • [PATCH] efi_loader: support EFI_OS_INDICATIONS_BOOT_TO_FW_UI   Simon Glass
    • [PATCH] efi_loader: support EFI_OS_INDICATIONS_BOOT_TO_FW_UI   Gary Guo
      • [PATCH] efi_loader: support EFI_OS_INDICATIONS_BOOT_TO_FW_UI   Simon Glass
      • [PATCH] efi_loader: support EFI_OS_INDICATIONS_BOOT_TO_FW_UI   Heinrich Schuchardt
  • [PATCH] efi_loader: support EFI_OS_INDICATIONS_BOOT_TO_FW_UI   Heinrich Schuchardt
    • [PATCH] efi_loader: support EFI_OS_INDICATIONS_BOOT_TO_FW_UI   Ilias Apalodimas
• [PATCH 0/1] u_boot_pylib: disable standalone module detection   Simon Glass
  • [PATCH 0/1] u_boot_pylib: disable standalone module detection   Paul HENRYS
    • [PATCH 0/1] u_boot_pylib: disable standalone module detection   Simon Glass
• [PATCH v2] common: cli_hush: fix console_buffer overflow on boot retry   Simon Glass
  • [PATCH v2] common: cli_hush: fix console_buffer overflow on boot retry   Rasmus Villemoes
• [PATCH] tpm: Add wolfTPM library support for TPM 2.0   Ilias Apalodimas
• [PATCH v5 0/6] misc: fs_loader: reorg and split to FS and FW loader + FIP loader   Christian Marangi
  • [PATCH v5 1/6] misc: fs_loader: fix ubifs not unmounted on dev_get_priv error   Christian Marangi
  • [PATCH v5 2/6] misc: fs_loader: reorganize and split to FS and FW loader   Christian Marangi
    • [PATCH v5 2/6] misc: fs_loader: reorganize and split to FS and FW loader   Simon Glass
  • [PATCH v5 3/6] misc: fw_loader: implement generic get_fw_loader_from_node()   Christian Marangi
    • [PATCH v5 3/6] misc: fw_loader: implement generic get_fw_loader_from_node()   Simon Glass
  • [PATCH v5 4/6] misc: fw_loader: implement request_firmware_size() OP   Christian Marangi
    • [PATCH v5 4/6] misc: fw_loader: implement request_firmware_size() OP   Simon Glass
  • [PATCH v5 5/6] misc: fw_loader: introduce FIP loader driver   Christian Marangi
    • [PATCH v5 5/6] misc: fw_loader: introduce FIP loader driver   Simon Glass
      • [PATCH v5 5/6] misc: fw_loader: introduce FIP loader driver   Christian Marangi
  • [PATCH v5 6/6] doc: dtbinding: Update documentation for Generic Firmware loader   Christian Marangi
    • [PATCH v5 6/6] doc: dtbinding: Update documentation for Generic Firmware loader   Simon Glass
• [PATCH v2] arch/x86/lib: implement cmdline configuration property   Guillaume Ranquet
  • [PATCH v2] arch/x86/lib: implement cmdline configuration property   Simon Glass
  • [PATCH v2] arch/x86/lib: implement cmdline configuration property   Heinrich Schuchardt
    • [PATCH v2] arch/x86/lib: implement cmdline configuration property   Simon Glass
      • [PATCH v2] arch/x86/lib: implement cmdline configuration property   Guillaume Ranquet
      • [PATCH v2] arch/x86/lib: implement cmdline configuration property   Simon Glass
• [PATCH] xiaomi pad 5 support   Lobanokivan11
  • [PATCH] xiaomi pad 5 support   Yao Zi
• [PATCH] powerpc/mpc83xx: Move alignment padding into __u_boot_list section   Tom Rini
• [PATCH 0/3] mtd: spinand: winbond: Misc fixes   Miquel Raynal
  • [PATCH 1/3] cmd: mtd: Prevent out-of-bound check   Miquel Raynal
    • [PATCH 1/3] cmd: mtd: Prevent out-of-bound check   Michael Nazzareno Trimarchi
  • [PATCH 2/3] mtd: spinand: winbond: Add missing QE bit on W25NxxJW devices   Miquel Raynal
    • [PATCH 2/3] mtd: spinand: winbond: Add missing QE bit on W25NxxJW devices   Michael Nazzareno Trimarchi
  • [PATCH 3/3] mtd: spinand: winbond: Clarify when to enable the HS bit   Miquel Raynal
    • [PATCH 3/3] mtd: spinand: winbond: Clarify when to enable the HS bit   Michael Nazzareno Trimarchi
• [PATCH v7 0/7] add loongson mips ls1c300 initial support   sgdfkk at 163.com
  • [PATCH v7 2/7] mips: loongson: lowlevel initialize   sgdfkk at 163.com
    • [PATCH v7 2/7] mips: loongson: lowlevel initialize   sgdfkk at 163.com
  • [PATCH v7 3/7] mips: loongson: lowlevel debug serial   sgdfkk at 163.com
    • [PATCH v7 3/7] mips: loongson: lowlevel debug serial   sgdfkk at 163.com
  • [PATCH v7 4/7] mips: loongson: ls1c300 board support   sgdfkk at 163.com
    • [PATCH v7 4/7] mips: loongson: ls1c300 board support   sgdfkk at 163.com
  • [PATCH v7 5/7] mips: loongson: add clk driver   sgdfkk at 163.com
    • [PATCH v7 5/7] mips: loongson: add clk driver   sgdfkk at 163.com
  • [PATCH v7 6/7] mips: loongson: add watchdog driver   sgdfkk at 163.com
    • [PATCH v7 6/7] mips: loongson: add watchdog driver   sgdfkk at 163.com
  • [PATCH v7 7/7] mips: loongson: ls1c300 dts and bindings   sgdfkk at 163.com
    • [PATCH v7 7/7] mips: loongson: ls1c300 dts and bindings   sgdfkk at 163.com
• [PATCH v7 1/7] mips: loongson: minimal initial SoC support   sgdfkk at 163.com
  • [PATCH v2 1/1] tools: u_boot_pylib: ensure all Python modules are installed   Simon Glass
• [REGRESSION] imx8mm_evk: FSPI build broken by 37e50627e   Alexander Koch
  • [REGRESSION] imx8mm_evk: FSPI build broken by 37e50627e   Marek Vasut
• [PATCH v2] sandbox: Add missing select's to the architecture symbol   Tom Rini
• [PATCH v2] optee: Correct dependencies for BOOTM_OPTEE   Tom Rini
• [PATCH] global: Audit Kconfig usage of PARTITION_TYPE_GUID   Tom Rini
• [PATCH] sata: Rework the CMD_SATA and SATA symbols   Tom Rini
• [PATCH] bootcount: Give i2c-eeprom a unique identifier   Tom Rini
• [PATCH] rtc: Remove legacy DS1338 support   Tom Rini
• [PATCH] rtc: ds1337: Remove various legacy code and update dependencies   Tom Rini
• [PATCH] rtc: Update Kconfig dependencies   Tom Rini
• [PATCH] env: Correct dependency for ENV_IS_IN_NAND   Tom Rini
• [PATCH] env: Make use of IF_ENABLED_INT in spi flash support   Tom Rini
• [PATCH] lmb: Correct dependency around CMD_BOOT[IMZ]   Tom Rini
• [PATCH] loads: Add LMB as a dependency   Tom Rini
• [PATCH] boot: Add DM_RTC as a dependency to CEDIT   Tom Rini
• [PATCH] cmd: Add missing dependency to CMD_PMC   Tom Rini
• [PATCH] clk: Add missing dependency for SANDBOX_CLK_CCF   Tom Rini
• [PATCH] gpio: Correct dependencies for legacy CMD_PCA953X   Tom Rini
• [PATCH] misc: Add missing dependency to CROS_EC_SANDBOX   Tom Rini
• [PATCH] spi: Correct dependency on SPI_MEM for many drivers   Tom Rini
• [PATCH] acpi: Correct dependencies for GENERATE_ACPI_TABLE   Tom Rini
• [SECURITY] NFS symlink chain buffer overflow → remote code execution (net/nfs-common.c)   Tom Rini
  • [SECURITY] NFS symlink chain buffer overflow → remote code execution (net/nfs-common.c)   manizzle alexandria
  • Re: [SECURITY] NFS symlink chain buffer overflow → remote code execution (net/nfs-common.c)   manizzle alexandria
    • Re: [SECURITY] NFS symlink chain buffer overflow → remote code execution (net/nfs-common.c)   manizzle alexandria
      • [SECURITY] NFS symlink chain buffer overflow → remote code execution (net/nfs-common.c)   Tom Rini
      • Re: [SECURITY] NFS symlink chain buffer overflow → remote code execution (net/nfs-common.c)   manizzle alexandria
• [PATCH] mtd: spi-nor-ids: add flags for mx25u12835f   David Lechner
  • [PATCH] mtd: spi-nor-ids: add flags for mx25u12835f   Takahiro.Kuwano at infineon.com
    • [PATCH] mtd: spi-nor-ids: add flags for mx25u12835f   David Lechner
  • [PATCH] mtd: spi-nor-ids: add flags for mx25u12835f   Tom Rini
• [PATCH] usb: cdns3: fix cdns3_bind() to avoid returning error and probe parent   Marek Vasut
  • [PATCH] usb: cdns3: fix cdns3_bind() to avoid returning error and probe parent   Siddharth Vadapalli
    • [PATCH] usb: cdns3: fix cdns3_bind() to avoid returning error and probe parent   Marek Vasut
• [PATCH 0/5] Add SPL support for Qualcomm platforms, starting with sdm845   michael.srba at seznam.cz
  • [PATCH 4/5] mach-snapdragon: support building SPL   michael.srba at seznam.cz
    • [PATCH 4/5] mach-snapdragon: support building SPL   Tom Rini
      • [PATCH 4/5] mach-snapdragon: support building SPL   Michael Srba
      • [PATCH 4/5] mach-snapdragon: support building SPL   Tom Rini
    • [PATCH 4/5] mach-snapdragon: support building SPL   Simon Glass
    • [PATCH 4/5] mach-snapdragon: support building SPL   Casey Connolly
  • [PATCH 5/5] dts: add empty .dtsi for shift-axolotl   michael.srba at seznam.cz
    • [PATCH 5/5] dts: add empty .dtsi for shift-axolotl   Simon Glass
      • [PATCH 5/5] dts: add empty .dtsi for shift-axolotl   Michael Srba
  • [0/5] Add SPL support for Qualcomm platforms, starting with sdm845   Simon Glass
    • [0/5] Add SPL support for Qualcomm platforms, starting with sdm845   Michael Srba
  • [PATCH 0/5] Add SPL support for Qualcomm platforms, starting with sdm845   Sumit Garg
    • [PATCH 0/5] Add SPL support for Qualcomm platforms, starting with sdm845   Michael Srba
      • [PATCH 0/5] Add SPL support for Qualcomm platforms, starting with sdm845   Sumit Garg
• [PATCH 1/5] Makefile: add SPL_REMAKE_ELF_LDSCRIPT feature   michael.srba at seznam.cz
  • [PATCH 1/5] Makefile: add SPL_REMAKE_ELF_LDSCRIPT feature   Simon Glass
    • [PATCH 1/5] Makefile: add SPL_REMAKE_ELF_LDSCRIPT feature   Michael Srba
      • [PATCH 1/5] Makefile: add SPL_REMAKE_ELF_LDSCRIPT feature   Simon Glass
      • [PATCH 1/5] Makefile: add SPL_REMAKE_ELF_LDSCRIPT feature   Michal Simek
• [PATCH 2/5] of_live: support in SPL   michael.srba at seznam.cz
  • [PATCH 2/5] of_live: support in SPL   Tom Rini
  • [PATCH 2/5] of_live: support in SPL   Simon Glass
    • [PATCH 2/5] of_live: support in SPL   Michael Srba
• [PATCH 3/5] drivers: allow clk_stub and spmi in SPL   michael.srba at seznam.cz
  • [PATCH 3/5] drivers: allow clk_stub and spmi in SPL   Tom Rini
  • [PATCH 3/5] drivers: allow clk_stub and spmi in SPL   Simon Glass
• [PATCH v2 0/2] Add Rockchip USBPHY DM driver   Johan Jonker
  • [PATCH v2 1/2] phy: rockchip: add phy-rockchip-usb2.c   Johan Jonker
  • [PATCH v2 2/2] usb: phy: remove rockchip_usb2_phy.c   Johan Jonker
  • [RESEND PATCH v2 2/2] usb: phy: remove rockchip_usb2_phy.c   Johan Jonker
• [PATCH 00/14] test: Convert tests to use FsHelper and DiskHelper   Simon Glass
  • [PATCH 01/14] test: Add a helper class to create disk images   Simon Glass
  • [PATCH 02/14] test: fs_helper: Skip empty srcdir when creating a filesystem   Simon Glass
  • [PATCH 03/14] test: Fix broken fs_obj_fat fixture   Simon Glass
  • [PATCH 04/14] test: Convert test_cat to use FsHelper   Simon Glass
  • [PATCH 05/14] test: Convert test_xxd to use FsHelper   Simon Glass
  • [PATCH 06/14] test: Convert test_efi_bootmgr to use FsHelper   Simon Glass
  • [PATCH 07/14] test: Convert setup_bootmenu_image() to use FsHelper   Simon Glass
  • [PATCH 08/14] test: Split out core of Fedora image into a new function   Simon Glass
  • [PATCH 09/14] test: Convert setup_bootflow_image() to use FsHelper   Simon Glass
  • [PATCH 10/14] test: Convert setup_efi_image() to use FsHelper   Simon Glass
  • [PATCH 11/14] test: Convert test_ut_dm_init() to use FsHelper   Simon Glass
  • [PATCH 12/14] test: Rename setup_bootflow_image()   Simon Glass
  • [PATCH 13/14] test: Convert setup_rauc_image() to use FsHelper   Simon Glass
  • [PATCH 14/14] test: Convert test_fs fixtures to use FsHelper   Simon Glass
  • [PATCH 00/14] test: Convert tests to use FsHelper and DiskHelper   Tom Rini
• [PATCH v2 0/7] Support metadata-driven A/B boot for STM32MP25   Dario Binacchi
  • [PATCH v2 1/7] lib: uuid: add partition type GUID for extended bootloader   Dario Binacchi
  • [PATCH v2 2/7] test: dm: part: add test for part_get_info_by_uuid   Dario Binacchi
    • [PATCH v2 2/7] test: dm: part: add test for part_get_info_by_uuid   Simon Glass
  • [PATCH v2 3/7] test: cmd: add unit tests for part command   Dario Binacchi
    • [PATCH v2 3/7] test: cmd: add unit tests for part command   Simon Glass
  • [PATCH v2 4/7] cmd: part: support lookup by UUID   Dario Binacchi
    • [PATCH v2 4/7] cmd: part: support lookup by UUID   Simon Glass
  • [PATCH v2 5/7] test: cmd: part: add UUID lookup tests   Dario Binacchi
    • [PATCH v2 5/7] test: cmd: part: add UUID lookup tests   Simon Glass
  • [PATCH v2 6/7] fwu: add helper to get image GUID by type and bank index   Dario Binacchi
    • [PATCH v2 6/7] fwu: add helper to get image GUID by type and bank index   Simon Glass
  • [PATCH v2 7/7] board: st: stm32mp25: support dynamic A/B bank bootup   Dario Binacchi
    • [PATCH v2 7/7] board: st: stm32mp25: support dynamic A/B bank bootup   Simon Glass
• [PATCH] arm: renesas: Enable preboot environment variable on all R-Car systems   Marek Vasut
• [PATCH] arm64: renesas: Enable SMC command on all R-Car 64-bit systems   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
  • [PULL] u-boot-sh/master   Tom Rini
  • [PULL] u-boot-sh/master   Marek Vasut
    • [PULL] u-boot-sh/master   Tom Rini
• [PATCH v3 1/2] kbuild: Move U-Boot .incbin rules to Makefile.lib-u-boot   Simon Glass
  • [PATCH v3 2/2] kbuild: Use if_changed for font and splash .incbin rules   Simon Glass
    • [PATCH v3 2/2] kbuild: Use if_changed for font and splash .incbin rules   Rasmus Villemoes
      • [PATCH v3 2/2] kbuild: Use if_changed for font and splash .incbin rules   Simon Glass
• [PATCH 0/2] Autoboot prompt customization and bootmenu cosmetics   Ferass El Hafidi
  • [PATCH 1/2] autoboot: allow custom prompt without requiring AUTOBOOT_KEYED   Ferass El Hafidi
    • [PATCH 1/2] autoboot: allow custom prompt without requiring AUTOBOOT_KEYED   Tom Rini
      • [PATCH 1/2] autoboot: allow custom prompt without requiring AUTOBOOT_KEYED   Ferass El Hafidi
      • [PATCH 1/2] autoboot: allow custom prompt without requiring AUTOBOOT_KEYED   Tom Rini
      • [PATCH 1/2] autoboot: allow custom prompt without requiring AUTOBOOT_KEYED   Ferass El Hafidi
      • [PATCH 1/2] autoboot: allow custom prompt without requiring AUTOBOOT_KEYED   Ferass El Hafidi
  • [PATCH 2/2] cmd: bootmenu: ANSI_CLEAR_LINE before entry name   Ferass El Hafidi
• [PATCH v2 0/8] test: Refactor FIT test for clarity and extensibility   Simon Glass
  • [PATCH v2 1/8] test: fit: Drop the fit_signature buildconfigspec   Simon Glass
  • [PATCH v2 2/8] test: fit: Avoid restarting U-Boot   Simon Glass
  • [PATCH v2 3/8] test: Rename test_fit() to test_fit_base()   Simon Glass
  • [PATCH v2 4/8] test: Add a check for a missing kernel   Simon Glass
  • [PATCH v2 5/8] test: Update fit test to fix a few Python warnings   Simon Glass
  • [PATCH v2 6/8] test: Convert FIT test to use a class   Simon Glass
    • [PATCH v2 6/8] test: Convert FIT test to use a class   Tom Rini
  • [PATCH v2 7/8] test: Add fsetup fixture and prepare helper for FIT test   Simon Glass
  • [PATCH v2 8/8] test: Add documentation for the FIT test   Simon Glass
• [PATCH v2] bootstd: efi: Handle prior-stage FDT in network path   Simon Glass
• [PATCH] CI: Update sjg lab to match currently actively boards   Simon Glass
  • [PATCH] CI: Update sjg lab to match currently actively boards   Tom Rini
    • [PATCH] CI: Update sjg lab to match currently actively boards   Simon Glass
• [PATCH] DM: crypto/fsl: fix unaligned exponent handling in fsl_rsa   Oleksandr Suvorov
  • [PATCH] DM: crypto/fsl: fix unaligned exponent handling in fsl_rsa   Peng Fan
• [PATCH v3 0/4] phy: add common PHY polarity properties support   Lucien.Jheng
  • [PATCH v3 1/4] phy: add common PHY properties support   Lucien.Jheng
    • [PATCH v3 1/4] phy: add common PHY properties support   Simon Glass
      • [PATCH v3 1/4] phy: add common PHY properties support   Lucien.Jheng
  • [PATCH v3 2/4] net: phy: air_en8811h: use standard rx-polarity/tx-polarity properties   Lucien.Jheng
    • [PATCH v3 2/4] net: phy: air_en8811h: use standard rx-polarity/tx-polarity properties   Simon Glass
      • [PATCH v3 2/4] net: phy: air_en8811h: use standard rx-polarity/tx-polarity properties   Lucien.Jheng
  • [PATCH v3 3/4] test: dm: add PHY common props unit tests   Lucien.Jheng
    • [PATCH v3 3/4] test: dm: add PHY common props unit tests   Simon Glass
  • [PATCH v3 4/4] sandbox: dts: add PHY common props test nodes   Lucien.Jheng
    • [PATCH v3 4/4] sandbox: dts: add PHY common props test nodes   Simon Glass
      • [PATCH v3 4/4] sandbox: dts: add PHY common props test nodes   Lucien.Jheng
  • [v3,0/4] phy: add common PHY polarity properties support   Simon Glass
    • [v3,0/4] phy: add common PHY polarity properties support   Lucien.Jheng
• [PATCH 0/2] Fix LPDDR3 H616 TPR6 parsing   Philippe Simons
  • [PATCH 1/2] sunxi: H616: dram: fix LPDDR3 TPR6 parsing   Philippe Simons
    • [PATCH 1/2] sunxi: H616: dram: fix LPDDR3 TPR6 parsing   Andre Przywara
  • [PATCH 2/2] sunxi: fix DRAM_SUNXI_TPR6 default value   Philippe Simons
• [PATCH] common: cli_hush: fix console_buffer overflow on boot retry   Ngo Luong Thanh Tra
  • [PATCH] common: cli_hush: fix console_buffer overflow on boot retry   Tom Rini
  • [PATCH] common: cli_hush: fix console_buffer overflow on boot retry   Ngo Luong Thanh Tra
    • [PATCH] common: cli_hush: fix console_buffer overflow on boot retry   Rasmus Villemoes
      • [PATCH] common: cli_hush: fix console_buffer overflow on boot retry   Simon Glass
• [PATCH] net: phy: ethernet_id: fix duplicate eth_phy binding   Pranav Tilak
  • [PATCH] net: phy: ethernet_id: fix duplicate eth_phy binding   Marek Vasut
    • [PATCH] net: phy: ethernet_id: fix duplicate eth_phy binding   Vinay Tilak, Pranav
• [PATCH] doc: api: bootcount: correct bootcount description   michael.opdenacker at rootcommit.com
• [PATCH 0/2] ARMv8 timer fixes for platforms without EL2 configuration   Balaji Selvanathan
  • [PATCH 1/2] armv8: timer: Add option to use virtual counter at EL1   Balaji Selvanathan
  • [PATCH 2/2] snapdragon: Set timer frequency for ARMV8_CNTFRQ_BROKEN platforms   Balaji Selvanathan
  • [PATCH 0/2] ARMv8 timer fixes for platforms without EL2 configuration   Sumit Garg
• [PATCH RFC 00/40] clk: port full Linux Common Clock Framework to U-Boot   Sumit Garg
• [PATCH v3 0/3] mach-snapdragon: Enable OP-TEE support   Sumit Garg
• [PATCH] net: phy: dp83867: default to 2ns delay if unspecified in device-tree   Siddharth Vadapalli
  • [PATCH] net: phy: dp83867: default to 2ns delay if unspecified in device-tree   Anshul Dalal
• [PATCH 1/6] env: scsi: rename ENV_SCSI_PART_UUID   Sumit Garg
• [PATCH v2 0/5] Add virtio-mmio support to m68k virt machine   Daniel Palmer
  • [PATCH v2 1/5] sysreset: qemu virt: Use __raw_writel()   Daniel Palmer
    • [PATCH v2 1/5] sysreset: qemu virt: Use __raw_writel()   Kuan-Wei Chiu
    • [PATCH v2 1/5] sysreset: qemu virt: Use __raw_writel()   Angelo Dureghello
  • [PATCH v2 2/5] m68k: Fix writew(), writel(), readw(), readl() endianness   Daniel Palmer
    • [PATCH v2 2/5] m68k: Fix writew(), writel(), readw(), readl() endianness   Kuan-Wei Chiu
      • [PATCH v2 2/5] m68k: Fix writew(), writel(), readw(), readl() endianness   Daniel Palmer
    • [PATCH v2 2/5] m68k: Fix writew(), writel(), readw(), readl() endianness   Angelo Dureghello
      • [PATCH v2 2/5] m68k: Fix writew(), writel(), readw(), readl() endianness   Daniel Palmer
      • [PATCH v2 2/5] m68k: Fix writew(), writel(), readw(), readl() endianness   Angelo Dureghello
      • [PATCH v2 2/5] m68k: Fix writew(), writel(), readw(), readl() endianness   Daniel Palmer
      • [PATCH v2 2/5] m68k: Fix writew(), writel(), readw(), readl() endianness   Angelo Dureghello
  • [PATCH v2 3/5] virtio: mmio: Keep vendor id little endian   Daniel Palmer
    • [PATCH v2 3/5] virtio: mmio: Keep vendor id little endian   Kuan-Wei Chiu
      • [PATCH v2 3/5] virtio: mmio: Keep vendor id little endian   Daniel Palmer
      • [PATCH v2 3/5] virtio: mmio: Keep vendor id little endian   Daniel Palmer
  • [PATCH v2 4/5] virtio: mmio: Allow instantiation via platform data   Daniel Palmer
    • [PATCH v2 4/5] virtio: mmio: Allow instantiation via platform data   Kuan-Wei Chiu
      • [PATCH v2 4/5] virtio: mmio: Allow instantiation via platform data   Daniel Palmer
  • [PATCH v2 5/5] board: qemu: m68k: Create virtio mmio instances   Daniel Palmer
• [PATCH v2] Add an initial CONTRIBUTE.rst   Peter Robinson
  • [PATCH v2] Add an initial CONTRIBUTE.rst   Tom Rini
• [ANN] U-Boot v2026.04 released   Tom Rini
• [PATCH v3 00/13] sc5xx Environment Cleanup and Fixes   Caleb Ethridge
• [PATCH v3 01/13] configs: sc5xx: Do not store environment in SPI flash   Caleb Ethridge
• [PATCH v3 02/13] mach-sc5xx: Remove update commands from default environment   Caleb Ethridge
• [PATCH v3 03/13] mach-sc5xx: Update boot commands   Caleb Ethridge
• [PATCH v3 04/13] mach-sc5xx: Switch from tftp to wget   Caleb Ethridge
• [PATCH v3 05/13] mach-sc5xx: Add USB boot command   Caleb Ethridge
• [PATCH v3 06/13] mach-sc5xx: Remove preliminary binman support   Caleb Ethridge
• [PATCH v3 07/13] dts: sc594: Fix gige-reset line on EZKIT   Caleb Ethridge
• [PATCH v3 08/13] mach-sc5xx: sc573: Rename EZKIT board to EZLITE   Caleb Ethridge
• [PATCH v3 09/13] mach-sc5xx: Update image load address   Caleb Ethridge
• [PATCH v3 10/13] mach-sc5xx: Update SPI bootargs for ubifs   Caleb Ethridge
• [PATCH v3 11/13] configs: sc5xx: Set default bootcmd to SPI boot   Caleb Ethridge
• [PATCH v3 12/13] arm: sc5xx: Remove SC5XX_LOADADDR and add kernel_addr_r   Caleb Ethridge
• [PATCH v3 13/13] arm: sc5xx: add missing boot env selectors   Caleb Ethridge
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
  • New Defects reported by Coverity Scan for Das U-Boot   Raymond Mao
• [PATCH 0/8] spi: mtk_snor: various fixes and improvements   David Lechner
  • [PATCH 1/8] spi: mtk_snor: clean up comments   David Lechner
  • [PATCH 2/8] spi: mtk_snor: avoid alloc in mtk_snor_cmd_program()   David Lechner
  • [PATCH 3/8] spi: mtk_snor: conditionally copy tx/rx data   David Lechner
  • [PATCH 4/8] spi: mtk_snor: check return value of mtk_snor_cmd_exec()   David Lechner
  • [PATCH 5/8] spi: mtk-snor: add bounds checking in mtk_snor_cmd_program()   David Lechner
  • [PATCH 6/8] spi: mtk_snor: support newer SOCs   David Lechner
  • [PATCH 7/8] spi: mtk_snor: fix zeroed data in DMA read bounce path   David Lechner
  • [PATCH 8/8] spi: mtk_snor: Remove status register write procedure in probe()   David Lechner
    • [PATCH 8/8] spi: mtk_snor: Remove status register write procedure in probe()   David Lechner
• [PATCH 0/2] arm: mediatek: enable SNOR on Genio 520/720 EVK   David Lechner
  • [PATCH 1/2] arm: dts: mediatek: add Genio 520/720 SNOR support   David Lechner
    • [PATCH 1/2] arm: dts: mediatek: add Genio 520/720 SNOR support   Macpaul Lin (林智斌)
  • [PATCH 2/2] configs: mediatek: add required config for SNOR on Genio 520/720 EVK   David Lechner
    • [PATCH 2/2] configs: mediatek: add required config for SNOR on Genio 520/720 EVK   Macpaul Lin (林智斌)
• Switch ARMv7 Cortex-A processor to ARM mode right before jumping to target   Anatol Pomozov
  • Switch ARMv7 Cortex-A processor to ARM mode right before jumping to target   Peter Robinson
  • Switch ARMv7 Cortex-A processor to ARM mode right before jumping to target   Peter Robinson
• [PATCH v1] configs: socfpga: stratix10: Disable mkeficapsule tool build   NG, BOON KHAI
  • [PATCH v1] configs: socfpga: stratix10: Disable mkeficapsule tool build   Tom Rini
    • [PATCH v1] configs: socfpga: stratix10: Disable mkeficapsule tool build   NG, BOON KHAI
      • [PATCH v1] configs: socfpga: stratix10: Disable mkeficapsule tool build   Chee, Tien Fong
      • [PATCH v1] configs: socfpga: stratix10: Disable mkeficapsule tool build   Tom Rini
• [PATCH v3 1/2] console: add console_flush_stdin()   Gregor Herburger
  • [PATCH v3 2/2] cli: flush stdin before enabling cli   Gregor Herburger
    • [PATCH v3 2/2] cli: flush stdin before enabling cli   Simon Glass
      • [PATCH v3 2/2] cli: flush stdin before enabling cli   Gregor Herburger
      • [PATCH v3 2/2] cli: flush stdin before enabling cli   Simon Glass
  • [PATCH v3 1/2] console: add console_flush_stdin()   Simon Glass
• [PATCH 1/2] mtd: nand: raw: Kconfig: clean up SPL Cadence NAND dependencies   MANIYAM, DINESH
  • [PATCH 1/2] mtd: nand: raw: Kconfig: clean up SPL Cadence NAND dependencies   Michael Nazzareno Trimarchi
• [PATCH] drivers: ddr: imx: Fix Kconfig for SAVED_DRAM_TIMING_BASE   Simona Toaca (OSS)
  • [PATCH] drivers: ddr: imx: Fix Kconfig for SAVED_DRAM_TIMING_BASE   Marek Vasut
• [PATCH] configs: imx9{43, 5}: Enable SPI SFDP support   Simona Toaca (OSS)
• [PATCH] cmd: fpga: Fix wrong preprocessor guard for loadb help text   Michal Simek
  • [PATCH] cmd: fpga: Fix wrong preprocessor guard for loadb help text   Alexander Dahl
  • [PATCH] cmd: fpga: Fix wrong preprocessor guard for loadb help text   Michal Simek
• [PATCH] board: ti: am335x: Conditional MDIO PAD configuration instead of static for AM335_ICE   Parvathi Pudi
  • [PATCH] board: ti: am335x: Conditional MDIO PAD configuration instead of static for AM335_ICE   Markus Schneider-Pargmann
    • [PATCH] board: ti: am335x: Conditional MDIO PAD configuration instead of static for AM335_ICE   Parvathi Pudi
      • [PATCH] board: ti: am335x: Conditional MDIO PAD configuration instead of static for AM335_ICE   Markus Schneider-Pargmann
      • [PATCH] board: ti: am335x: Conditional MDIO PAD configuration instead of static for AM335_ICE   Parvathi Pudi
• [PATCH] virtio: mmio: Return error codes on probe failures   Kuan-Wei Chiu
  • [PATCH] virtio: mmio: Return error codes on probe failures   Daniel Palmer
  • [PATCH] virtio: mmio: Return error codes on probe failures   Tom Rini
• [PATCH] soc: xilinx: zynqmp: Add support for new ZynqMP devices   Michal Simek
  • [PATCH] soc: xilinx: zynqmp: Add support for new ZynqMP devices   Michal Simek
• [PATCH] fpga: xilinx: Add option to skip bitstream ID check   Michal Simek
  • [PATCH] fpga: xilinx: Add option to skip bitstream ID check   Michal Simek
• [PATCH] board: xilinx: zynqmp: Register alternate FPGA device for zu63dr_SE   Michal Simek
  • [PATCH] board: xilinx: zynqmp: Register alternate FPGA device for zu63dr_SE   Michal Simek
• [PATCH] clk: versaclock: Fix incorrect error check in versaclock_probe()   Kuan-Wei Chiu
• [PATCH] net: xilinx: Reject broadcast and multicast packets in AXI Ethernet MAC   Michal Simek
• [PATCH] clk: versal: Fix out-of-bounds parent id for DUMMY_PARENT   Michal Simek
• [PATCH 0/3] Add PCIe and NVMe support for AMD Versal Gen 2   Michal Simek
• [PATCH 1/2] serial: msm-geni: allow invalid clock   Sumit Garg
  • [PATCH 1/2] serial: msm-geni: allow invalid clock   Casey Connolly
    • [PATCH 1/2] serial: msm-geni: allow invalid clock   Sumit Garg
• [PATCH] tools: fwumdata: Fix use-after-free in parse_config()   Kory Maincent
• [PATCH v4 0/8] Add support for TQMa7x   Alexander Feilke
  • [PATCH v4 1/8] Kconfig: update build-target for MX7 with SPL   Alexander Feilke
  • [PATCH v4 6/8] board: tqma7: add code for u-boot with spl   Alexander Feilke
    • [PATCH v4 6/8] board: tqma7: add code for u-boot with spl   Fabio Estevam
      • [PATCH v4 6/8] board: tqma7: add code for u-boot with spl   Feilke, Alexander
  • [PATCH v4 8/8] doc: tqma7: add documentation   Alexander Feilke
  • [PATCH v4 0/8] Add support for TQMa7x   Feilke, Alexander
• [PATCH v4 2/8] board/tq: Add common SoM API   Alexander Feilke
• [PATCH v4 3/8] env: add env_set_runtime() helper   Alexander Feilke
• [PATCH v4 4/8] arch: arm: dts: tqma7x: add u-boot device tree fragments   Alexander Feilke
• [PATCH v4 5/8] arch: arm: dts: tqma7x: add boot phase properties   Alexander Feilke
  • [PATCH v4 5/8] arch: arm: dts: tqma7x: add boot phase properties   Fabio Estevam
    • [PATCH v4 5/8] arch: arm: dts: tqma7x: add boot phase properties   Alexander Feilke
• [PATCH v4 7/8] configs: tqma7: add defconfigs   Alexander Feilke
• [PATCH 1/6] ufs: ufs-mediatek: add mt8183-ufshci compatible   Macpaul Lin (林智斌)
• [PATCH] rtc: rv3028: fix PORF flag not being cleared   Viguera, Javier
  • [PATCH] rtc: rv3028: fix PORF flag not being cleared   Tom Rini
  • [PATCH] rtc: rv3028: fix PORF flag not being cleared   Tom Rini
• [PATCH 2/6] ufs: mediatek: clean up zero terminator   Macpaul Lin (林智斌)
• [PATCH 6/6] config: mediatek: add UFS defconfigs for Genio 520/720 EVKs   Macpaul Lin (林智斌)
• [PATCH 1/2] arm: mediatek: add SIP platform bininfo lookups   Macpaul Lin (林智斌)
• [PATCH 2/2] arm: mediatek: mt8189: print specific CPU information   Macpaul Lin (林智斌)
• [PATCH v3 6/6] board: mediatek: Add Genio 520/720 EVK defconfigs   Macpaul Lin (林智斌)
• [PATCH 5/6] arm: dts: mediatek: add UFS variant of Genio 520/720 EVK   Macpaul Lin (林智斌)
• [PATCH 4/6] arm: dts: mt8189: add UFS nodes   Macpaul Lin (林智斌)
• [PATCH 3/6] clk: mediatek: mt8189: add UFS clocks   Macpaul Lin (林智斌)
• [PATCH v2 1/4] pinctrl: mediatek: add handling for RSEL register   Macpaul Lin (林智斌)
• [PATCH v2 2/4] pinctrl: mediatek: mt8189: fix pinconf bias   Macpaul Lin (林智斌)
• [PATCH v2 3/4] pinctrl: mediatek: print bias info along with pinmux   Macpaul Lin (林智斌)
• [PATCH v2 4/4] pinctrl: mediatek: mtk8189: set get_pinconf functions   Macpaul Lin (林智斌)
• [PATCH v1] Fix old TARGET naming to ARCH for PL330   Brian Sune
  • [PATCH v1] Fix old TARGET naming to ARCH for PL330   Chee, Tien Fong
• [PATCH v6 5/7] mips: loongson: add clk driver   duhuanpeng
• [PATCH v2 0/4] pinctrl: mediatek: fix mt8189 MSDC and I2C pins   David Lechner
• [PATCH v3 0/6] boards: mediatek: initial support for Genio 720 EVK   David Lechner
• [PATCH 0/3] boards: mediatek: add Genio 520/720 SD card support   David Lechner
• Host GnuTLS now needs pkcs11 support   Franz Schnyder
  • EXTERNAL - Host GnuTLS now needs pkcs11 support   Wojciech Dubowik
    • EXTERNAL - Host GnuTLS now needs pkcs11 support   Franz Schnyder
    • EXTERNAL - Host GnuTLS now needs pkcs11 support   Tom Rini
• [PATCH] Update my email address   Sean Anderson
  • [PATCH] Update my email address   Sean Anderson
  • [PATCH] Update my email address   Tom Rini
• [PATCH v2] sunxi: H616: dram: fix LPDDR3 TRP6 parsing   Philippe Simons
  • [PATCH v2] sunxi: H616: dram: fix LPDDR3 TRP6 parsing   Mikhail Kalashnikov
    • [PATCH v2] sunxi: H616: dram: fix LPDDR3 TRP6 parsing   Paul Kocialkowski
      • [PATCH v2] sunxi: H616: dram: fix LPDDR3 TRP6 parsing   Andre Przywara
      • [PATCH v2] sunxi: H616: dram: fix LPDDR3 TRP6 parsing   Paul Kocialkowski
      • [PATCH v2] sunxi: H616: dram: fix LPDDR3 TRP6 parsing   Andre Przywara
• [PATCH] board: nanopi2: fix bd_update_env() cmdline buffer overflow   Stefan Bosch
  • [PATCH] board: nanopi2: fix bd_update_env() cmdline buffer overflow   Tom Rini
• [PATCH v1] arm: dts: s5p4418: fix "mmc write failed" e.g. at cmd saveenv   Stefan Bosch
  • [PATCH v1] arm: dts: s5p4418: fix "mmc write failed" e.g. at cmd saveenv   Tom Rini
    • [PATCH v1] arm: dts: s5p4418: fix "mmc write failed" e.g. at cmd saveenv   Stefan Bosch
      • [PATCH v1] arm: dts: s5p4418: fix "mmc write failed" e.g. at cmd saveenv   Tom Rini
• [PATCH 0/2] arm: mediatek: print specific CPU type   David Lechner
• [GIT PULL] Please pull mediatek-for-master-2026-04-07 into master   David Lechner
  • [GIT PULL] Please pull mediatek-for-master-2026-04-07 into master   Tom Rini
• [PATCH] doc: release cycle: fix 2026.04 stats link   David Lechner
  • [PATCH] doc: release cycle: fix 2026.04 stats link   Tom Rini
  • [PATCH] doc: release cycle: fix 2026.04 stats link   Tom Rini
• [PATCH v2 1/2] env: Make more use of the ENV_SAVE_PTR macro   Tom Rini
• [PATCH] dts: Disallow OF_UPSTREAM for sandbox   Tom Rini
• [PATCH] lmb: Rework the LMB_ARCH_MEM_MAP symbol   Tom Rini
• [PATCH] lmb: boot: Update dependencies within BOOT_DEFAULTS_CMDS   Tom Rini
• [PATCH] cmd: Correct dependencies for CMD_BOOTD   Tom Rini
• [PATCH] w1: Correct dependencies for CMD_W1   Tom Rini
• [PATCH] spl: env: Correct dependencies for SPL_SAVEENV and MMC   Tom Rini
• [PATCH] input: Correct dependencies for CROS_EC_KEYB   Tom Rini
• [PATCH] serial: ns16550: Fix an "unused" warning with SERIAL_PRESENT=n and OF_REAL=y   Tom Rini
• [PATCH] serial: omap: Fix "unused" warnings with SERIAL_PRESENT=n and OF_REAL=y   Tom Rini
• [PATCH] tpl: Correct dependencies for TPL_OF_CONTROL   Tom Rini
• [PATCH] global: Correct duplicate U_BOOT_DRIVER entry names   Tom Rini
• [PATCH] arm: mach-sc5xx: Align header paths with SYS_SOC convention   Tom Rini
• [PATCH] sandbox: Adjust how OS-interface files are built   Tom Rini
• [PATCH] smbios: Add an explicit bounds check for Type 9 length   Raymond Mao
  • [PATCH] smbios: Add an explicit bounds check for Type 9 length   Simon Glass
• [PATCH] net: nfs: fix buffer overflow in nfs_readlink_reply()   Murtaza Munaim
  • [PATCH] net: nfs: fix buffer overflow in nfs_readlink_reply()   Sebastian Alba Vives
    • [PATCH] net: nfs: fix buffer overflow in nfs_readlink_reply()   Jerome Forissier
      • [PATCH] net: nfs: fix buffer overflow in nfs_readlink_reply()   Sebastián Alba
  • [PATCH] net: nfs: fix buffer overflow in nfs_readlink_reply()   Murtaza
    • [PATCH] net: nfs: fix buffer overflow in nfs_readlink_reply()   Jerome Forissier
• [PATCH] doc: CONTRIBUTE: fix top heading level   David Lechner
  • [PATCH] doc: CONTRIBUTE: fix top heading level   David Lechner
    • [PATCH] doc: CONTRIBUTE: fix top heading level   David Lechner
• [PATCH 0/3] sunxi: Fix and extend SPL power LED support   Andre Przywara
• [PATCH 1/3] sunxi: spl: fix SPL_SUNXI_LED active low configuration   Andre Przywara
  • [PATCH 1/3] sunxi: spl: fix SPL_SUNXI_LED active low configuration   Quentin Schulz
  • [PATCH 1/3] sunxi: spl: fix SPL_SUNXI_LED active low configuration   Paul Kocialkowski
    • [PATCH 1/3] sunxi: spl: fix SPL_SUNXI_LED active low configuration   Quentin Schulz
      • [PATCH 1/3] sunxi: spl: fix SPL_SUNXI_LED active low configuration   Andre Przywara
      • [PATCH 1/3] sunxi: spl: fix SPL_SUNXI_LED active low configuration   Quentin Schulz
• [PATCH 2/3] sunxi: configs: enable power LEDs on 32-bit boards   Andre Przywara
• [PATCH 3/3] sunxi: configs: enable power LEDs on 64-bit boards   Andre Przywara
• [PATCH v2] net: phy: fix duplicate eth_phy binding   Pranav Tilak
  • [PATCH v2] net: phy: fix duplicate eth_phy binding   Marek Vasut
    • [PATCH v2] net: phy: fix duplicate eth_phy binding   Vinay Tilak, Pranav
      • [PATCH v2] net: phy: fix duplicate eth_phy binding   Marek Vasut
• [PATCH v1 0/9] Qualcomm IPQ5210 SoC bringup   Varadarajan Narayanan
  • [PATCH v1 1/9] dts: ipq5210-rdp504-u-boot: add override dtsi   Varadarajan Narayanan
  • [PATCH v1 2/9] doc: board/qualcomm: Update RDP build instructions   Varadarajan Narayanan
  • [PATCH v1 3/9] clk/qcom: add initial clock driver for ipq5210   Varadarajan Narayanan
  • [PATCH v1 4/9] pinctrl: qcom: Add ipq5210 pinctrl driver   Varadarajan Narayanan
  • [PATCH v1 5/9] misc: qcom_geni: Add minicore support   Varadarajan Narayanan
    • [PATCH v1 5/9] misc: qcom_geni: Add minicore support   Casey Connolly
  • [PATCH v1 6/9] spl: Include SMEM driver in SPL   Varadarajan Narayanan
  • [PATCH v1 7/9] mach-snapdragon: Add initial support for IPQ5210 SPL   Varadarajan Narayanan
  • [PATCH v1 8/9] mach-snapdragon: Add commands to create wrapper ELF   Varadarajan Narayanan
  • [PATCH v1 9/9] configs: add qcom_ipq5210_mmc_defconfig   Varadarajan Narayanan
• [PATCH v2] usb: gadget: Move USB_GADGET_DUALSPEED to be slightly more visible   Mattijs Korpershoek
• [PATCH] dfu: Correct dependencies for DFU_TFTP   Mattijs Korpershoek
• [PATCH v2] video: simplefb: Map framebuffer region on probe on ARM64   Luca Weiss
  • [PATCH v2] video: simplefb: Map framebuffer region on probe on ARM64   Sumit Garg
• [PATCH v4 0/7] qcom: Add NVMEM bitfield support and reboot‑mode integration   Aswin Murugan
  • [PATCH v4 1/7] misc: Add support for bit fields in NVMEM cells   Aswin Murugan
  • [PATCH v4 2/7] misc: qcom: Add Qualcomm SPMI SDAM NVMEM driver   Aswin Murugan
  • [PATCH v4 3/7] mach-snapdragon: Integrate reboot-mode handling   Aswin Murugan
    • [PATCH v4 3/7] mach-snapdragon: Integrate reboot-mode handling   Casey Connolly
  • [PATCH v4 4/7] dts: qcs615-ride-u-boot.dtsi: Add reboot-mode support   Aswin Murugan
    • [PATCH v4 4/7] dts: qcs615-ride-u-boot.dtsi: Add reboot-mode support   Sumit Garg
  • [PATCH v4 5/7] qcom_defconfig: Enable reboot-mode support in qcom_defconfig   Aswin Murugan
  • [PATCH v4 6/7] test: dm: add comprehensive tests for NVMEM bit field operations   Aswin Murugan
  • [PATCH v4 7/7] misc: update API documentation for bit field support in NVMEM   Aswin Murugan
• [PATCH v1 1/2] lib: hashtable: fix integer overflow in himport_r   Aristo Chen
  • [PATCH v1 2/2] test: env: add test for himport_r SIZE_MAX overflow guard   Aristo Chen
    • [PATCH v1 2/2] test: env: add test for himport_r SIZE_MAX overflow guard   Simon Glass
  • [PATCH v1 1/2] lib: hashtable: fix integer overflow in himport_r   Stefan Monnier
  • [PATCH v1 1/2] lib: hashtable: fix integer overflow in himport_r   Rasmus Villemoes
• [PATCH] arm: Remove redundant "xPL_SYS_MALLOC_F default y" entries   Tom Rini
• [PATCH] spl: Remove unused CONFIG_SPL_FRAMEWORK_BOARD_INIT_F option   Tom Rini
• [PATCH] hikey960: Drop unnecessary BOARD_EARLY_INIT_F usage   Tom Rini
• [PATCH] dm: Respect dma-ranges size   Tom Rini
• [PATCH] mmc: allow forward compatibility for EXT_CSD_REV   Peng Fan
  • [PATCH] mmc: allow forward compatibility for EXT_CSD_REV   박민우 (MW Park)
• [PATCH 01/13] boot: Split out the first part of fit_image_load()   Tom Rini
  • [PATCH 01/13] boot: Split out the first part of fit_image_load()   Simon Glass
    • [PATCH 01/13] boot: Split out the first part of fit_image_load()   Tom Rini
      • [PATCH 01/13] boot: Split out the first part of fit_image_load()   Simon Glass
• [PATCH 02/13] boot: Move call to fit_image_select() and rename it   Tom Rini
• [PATCH 03/13] boot: Tidy up setting of the OS arch on host builds   Tom Rini
• [PATCH 04/13] boot: Move type and OS checking into a new function   Tom Rini
• [PATCH 05/13] boot: Move handling of the load_op into a separate function   Tom Rini
• [PATCH 00/13] boot: Make fit_image_load() easier to maintain   Tom Rini
• [PATCH v2 0/2] Autoboot prompt customization and bootmenu cosmetics   Ferass El Hafidi
  • [PATCH v2 1/2] autoboot: allow custom prompt without requiring AUTOBOOT_KEYED   Ferass El Hafidi
    • [PATCH v2 1/2] autoboot: allow custom prompt without requiring AUTOBOOT_KEYED   Tom Rini
    • [PATCH v2 1/2] autoboot: allow custom prompt without requiring AUTOBOOT_KEYED   Simon Glass
      • [PATCH v2 1/2] autoboot: allow custom prompt without requiring AUTOBOOT_KEYED   Simon Glass
      • [PATCH v2 1/2] autoboot: allow custom prompt without requiring AUTOBOOT_KEYED   Ferass El Hafidi
      • [PATCH v2 1/2] autoboot: allow custom prompt without requiring AUTOBOOT_KEYED   Tom Rini
      • [PATCH v2 1/2] autoboot: allow custom prompt without requiring AUTOBOOT_KEYED   Ferass El Hafidi
  • [PATCH v2 2/2] cmd: bootmenu: ANSI_CLEAR_LINE before entry name   Ferass El Hafidi
    • [PATCH v2 2/2] cmd: bootmenu: ANSI_CLEAR_LINE before entry name   Simon Glass
  • [PATCH v2 0/2] Autoboot prompt customization and bootmenu cosmetics   Ferass El Hafidi
• [PATCH] cmd/scsi: drop scsi reset command   Tom Rini
• [PATCH 0/6] env: scsi: support SCSI env without partition UUID   Tom Rini
• [PATCH 0/9] arm: hpe: Add HPE GSC (Gen12) BMC SoC support   Jorge Cisneros
  • [PATCH 7/9] board: hpe: Add GSC board support   Jorge Cisneros
    • [PATCH 7/9] board: hpe: Add GSC board support   Tom Rini
  • [PATCH 0/9] arm: hpe: Add HPE GSC (Gen12) BMC SoC support   Tom Rini
• [PATCH 1/9] arm: hpe: Rename ARCH_GXP to ARCH_HPE and add GSC SoC choice   Jorge Cisneros
  • [PATCH 1/9] arm: hpe: Rename ARCH_GXP to ARCH_HPE and add GSC SoC choice   Tom Rini
• [PATCH 2/9] arm: hpe: Add GSC SoC support   Jorge Cisneros
• [PATCH 3/9] arm: dts: Add HPE GSC device tree   Jorge Cisneros
  • [PATCH 3/9] arm: dts: Add HPE GSC device tree   Tom Rini
• [PATCH 4/9] watchdog: Add HPE GSC watchdog driver   Jorge Cisneros
• [PATCH 5/9] misc: Add HPE GSC memory-mapped EEPROM driver   Jorge Cisneros
• [PATCH 6/9] net: macb: Add HPE GSC GEM Ethernet support   Jorge Cisneros
• [PATCH 8/9] configs: Add gsc_defconfig for HPE GSC SoC   Jorge Cisneros
  • [PATCH 8/9] configs: Add gsc_defconfig for HPE GSC SoC   Tom Rini
• [PATCH 9/9] MAINTAINERS: Add HPE GSC files and maintainer   Jorge Cisneros
• [PATCH 0/4] Enable EFI Capsule on Disk on Libre Computer LePotato & LaFrite   Ferass El Hafidi
  • [PATCH 1/4] arm: mach-meson: move reset_cpu to spl only   Ferass El Hafidi
    • [PATCH 1/4] arm: mach-meson: move reset_cpu to spl only   Neil Armstrong
  • [PATCH 3/4] configs: libretech-ac_defconfig: enable EFI Capsule on Disk   Ferass El Hafidi
    • [PATCH 3/4] configs: libretech-ac_defconfig: enable EFI Capsule on Disk   Neil Armstrong
  • [PATCH 4/4] configs: libretech-cc_defconfig: enable EFI Capsule on Disk   Ferass El Hafidi
    • [PATCH 4/4] configs: libretech-cc_defconfig: enable EFI Capsule on Disk   Neil Armstrong
  • [PATCH 0/4] Enable EFI Capsule on Disk on Libre Computer LePotato & LaFrite   Anand Moon
    • [PATCH 0/4] Enable EFI Capsule on Disk on Libre Computer LePotato & LaFrite   Ferass El Hafidi
      • [PATCH 0/4] Enable EFI Capsule on Disk on Libre Computer LePotato & LaFrite   Anand Moon
  • [PATCH 0/4] Enable EFI Capsule on Disk on Libre Computer LePotato & LaFrite   Neil Armstrong
  • [PATCH 0/4] Enable EFI Capsule on Disk on Libre Computer LePotato & LaFrite   Neil Armstrong
• [PATCH 2/4] arm: meson: enable SYSRESET_PSCI   Ferass El Hafidi
  • [PATCH 2/4] arm: meson: enable SYSRESET_PSCI   Neil Armstrong
• [PATCH v3 0/5] Add virtio-mmio support to m68k virt machine   Daniel Palmer
  • [PATCH v3 1/5] sysreset: qemu virt: Use __raw_writel()   Daniel Palmer
    • [PATCH v3 1/5] sysreset: qemu virt: Use __raw_writel()   Simon Glass
    • [PATCH v3 1/5] sysreset: qemu virt: Use __raw_writel()   Angelo Dureghello
  • [PATCH v3 2/5] m68k: Fix writew(), writel(), readw(), readl() endianness for classic m68k   Daniel Palmer
    • [PATCH v3 2/5] m68k: Fix writew(), writel(), readw(), readl() endianness for classic m68k   Simon Glass
    • [PATCH v3 2/5] m68k: Fix writew(), writel(), readw(), readl() endianness for classic m68k   Angelo Dureghello
      • [PATCH v3 2/5] m68k: Fix writew(), writel(), readw(), readl() endianness for classic m68k   Daniel Palmer
  • [PATCH v3 3/5] virtio: mmio: Allow instantiation via platform data   Daniel Palmer
    • [PATCH v3 3/5] virtio: mmio: Allow instantiation via platform data   Simon Glass
    • [PATCH v3 3/5] virtio: mmio: Allow instantiation via platform data   Angelo Dureghello
      • [PATCH v3 3/5] virtio: mmio: Allow instantiation via platform data   Daniel Palmer
  • [PATCH v3 4/5] virtio: blk: Fix converting the vendor id to a string   Daniel Palmer
    • [PATCH v3 4/5] virtio: blk: Fix converting the vendor id to a string   Simon Glass
    • [PATCH v3 4/5] virtio: blk: Fix converting the vendor id to a string   Kuan-Wei Chiu
      • [PATCH v3 4/5] virtio: blk: Fix converting the vendor id to a string   Daniel Palmer
      • [PATCH v3 4/5] virtio: blk: Fix converting the vendor id to a string   Kuan-Wei Chiu
      • [PATCH v3 4/5] virtio: blk: Fix converting the vendor id to a string   Daniel Palmer
  • [PATCH v3 5/5] board: qemu: m68k: Create virtio mmio instances   Daniel Palmer
    • [PATCH v3 5/5] board: qemu: m68k: Create virtio mmio instances   Angelo Dureghello
      • [PATCH v3 5/5] board: qemu: m68k: Create virtio mmio instances   Daniel Palmer
    • [PATCH v3 5/5] board: qemu: m68k: Create virtio mmio instances   Simon Glass
• [PATCH 0/5] board: ten64: add USB Hub (USB5744) management support   Mathew McBride
  • [PATCH 1/5] usb: onboard-hub: fix compile issue with gpio.h import   Mathew McBride
    • [PATCH 1/5] usb: onboard-hub: fix compile issue with gpio.h import   Peng Fan
  • [PATCH 2/5] board: ten64: add fdt fixup to hide usb hub topology   Mathew McBride
    • [PATCH 2/5] board: ten64: add fdt fixup to hide usb hub topology   Peng Fan
  • [PATCH 3/5] board: ten64: remove USB hub references from internal FDT when needed   Mathew McBride
    • [PATCH 3/5] board: ten64: remove USB hub references from internal FDT when needed   Peng Fan
  • [PATCH 4/5] configs: ten64: enable USB_ONBOARD_HUB (USB5744) option   Mathew McBride
  • [PATCH 5/5] configs: ten64: switch to OF_UPSTREAM   Mathew McBride
    • [PATCH 5/5] configs: ten64: switch to OF_UPSTREAM   Fabio Estevam
      • [PATCH 5/5] configs: ten64: switch to OF_UPSTREAM   Peng Fan
• [SECURITY] net: nfs: buffer overflow in nfs_readlink_reply() in legacy NFS path (nfs-common.c) , incomplete fix   Sebastián Alba
  • [SECURITY] net: nfs: buffer overflow in nfs_readlink_reply() in legacy NFS path (nfs-common.c) , incomplete fix   Tom Rini
    • [SECURITY] net: nfs: buffer overflow in nfs_readlink_reply() in legacy NFS path (nfs-common.c) , incomplete fix   Sebastián Alba
• [PATCH] mmc: msm_sdhci: Use max-frequency to get clock rate   Varadarajan Narayanan
  • [PATCH] mmc: msm_sdhci: Use max-frequency to get clock rate   Sumit Garg
• [PATCH] tools: mkeficapsule: Add disable pkcs11 menu option   Wojciech Dubowik
  • [PATCH] tools: mkeficapsule: Add disable pkcs11 menu option   Franz Schnyder
    • [PATCH] tools: mkeficapsule: Add disable pkcs11 menu option   Wojciech Dubowik
      • [PATCH] tools: mkeficapsule: Add disable pkcs11 menu option   Francesco Dolcini
      • [PATCH] tools: mkeficapsule: Add disable pkcs11 menu option   Paul Barker
      • [PATCH] tools: mkeficapsule: Add disable pkcs11 menu option   Francesco Dolcini
      • [OE-core] [PATCH] tools: mkeficapsule: Add disable pkcs11 menu option   Quentin Schulz
  • [PATCH] tools: mkeficapsule: Add disable pkcs11 menu option   Simon Glass
    • [PATCH] tools: mkeficapsule: Add disable pkcs11 menu option   Wojciech Dubowik
• [GIT PULL] Please pull fsl-qoriq-for-2026.07-rc1   Peng Fan
  • [GIT PULL] Please pull fsl-qoriq-for-2026.07-rc1   Tom Rini
• [PATCH 13/14] net: phy: add Microchip LAN8841 support   Manikandan.M at microchip.com
• [PATCH] android_ab: fix slot selection   Mattijs Korpershoek
  • [PATCH] android_ab: fix slot selection   Pinnell McAllister, Colin
• [PATCH 1/3] power: pmic: mtk-pwrap: add init capability flag   Julien Stephan
  • [PATCH 1/3] power: pmic: mtk-pwrap: add init capability flag   Macpaul Lin (林智斌)
• [PATCH 2/3] power: pmic: mtk-pwrap: add PWRAP_CAP_WDT_SRC flag   Julien Stephan
  • [PATCH 2/3] power: pmic: mtk-pwrap: add PWRAP_CAP_WDT_SRC flag   Macpaul Lin (林智斌)
• [PATCH 0/2] u-boot: pinctrl: scmi: Use standard pin muxing format   Peng Fan (OSS)
• [PATCH v2] gpio: scmi: Add gpio_scmi driver   Peng Fan (OSS)
• [PATCH v2] clk: scmi: Fix protocol version fetch for non-CCF platforms   Peng Fan (OSS)
• [PATCH v2] boot/fit: fix misleading comment   Julien Stephan
  • [PATCH v2] boot/fit: fix misleading comment   David Lechner
  • [PATCH v2] boot/fit: fix misleading comment   Tom Rini
• [PATCH v6 0/6] misc: fs_loader: reorg and split to FS and FW loader + FIP loader   Christian Marangi
  • [PATCH v6 1/6] misc: fs_loader: fix ubifs not unmounted on dev_get_priv error   Christian Marangi
  • [PATCH v6 2/6] misc: fs_loader: reorganize and split to FS loader and FW UCLASS   Christian Marangi
    • [PATCH v6 2/6] misc: fs_loader: reorganize and split to FS loader and FW UCLASS   Simon Glass
  • [PATCH v6 3/6] misc: fw_loader: implement generic get_fw_loader_from_node()   Christian Marangi
    • [PATCH v6 3/6] misc: fw_loader: implement generic get_fw_loader_from_node()   Simon Glass
  • [PATCH v6 4/6] misc: fw_loader: implement request_firmware_size() OP   Christian Marangi
    • [PATCH v6 4/6] misc: fw_loader: implement request_firmware_size() OP   Simon Glass
  • [PATCH v6 5/6] misc: fw_loader: introduce FIP loader driver   Christian Marangi
    • [PATCH v6 5/6] misc: fw_loader: introduce FIP loader driver   Simon Glass
  • [PATCH v6 6/6] doc: dtbinding: Update documentation for Generic Firmware loader   Christian Marangi
    • Re: [PATCH v6 6/6] doc: dtbinding: Update documentation for Generic Firmware loader   Heinrich Schuchardt
    • [PATCH v6 6/6] doc: dtbinding: Update documentation for Generic Firmware loader   Simon Glass
  • [v6,0/6] misc: fs_loader: reorg and split to FS and FW loader + FIP loader   Simon Glass
• [PATCH 0/4] spl: Add UFS boot support for SPL on Qualcomm   Balaji Selvanathan
  • [PATCH 1/4] spl: ufs: Add partition support and flexible loading   Balaji Selvanathan
    • [PATCH 1/4] spl: ufs: Add partition support and flexible loading   Alexey Charkov
      • [PATCH 1/4] spl: ufs: Add partition support and flexible loading   Balaji Selvanathan
  • [PATCH 2/4] drivers: ufs: qcom: Add SPL support   Balaji Selvanathan
    • [PATCH 2/4] drivers: ufs: qcom: Add SPL support   Ferass El Hafidi
      • [PATCH 2/4] drivers: ufs: qcom: Add SPL support   Ferass El Hafidi
    • [PATCH 2/4] drivers: ufs: qcom: Add SPL support   Sumit Garg
  • [PATCH 3/4] drivers: phy: qcom: Add UFS PHY support for SPL   Balaji Selvanathan
    • [PATCH 3/4] drivers: phy: qcom: Add UFS PHY support for SPL   Sumit Garg
  • [PATCH 4/4] clk: stub: Add Kconfig option for SPL stub driver   Balaji Selvanathan
    • [PATCH 4/4] clk: stub: Add Kconfig option for SPL stub driver   Alexey Charkov
      • [PATCH 4/4] clk: stub: Add Kconfig option for SPL stub driver   Balaji Selvanathan
• [PATCH] soc: qcom: cmd-db: Add optional support for device programmer flows   Balaji Selvanathan
  • [PATCH] soc: qcom: cmd-db: Add optional support for device programmer flows   Casey Connolly
    • [PATCH] soc: qcom: cmd-db: Add optional support for device programmer flows   Sumit Garg
      • [PATCH] soc: qcom: cmd-db: Add optional support for device programmer flows   Casey Connolly
    • [PATCH v2 0/1] tools: u_boot_pylib: ensure all Python modules are installed   Tom Rini
• [PATCH v2 0/8] power: pmic: mtk-pwrap: add more capability flags   David Lechner
  • [PATCH v2 1/8] power: pmic: mtk-pwrap: fix file description   David Lechner
  • [PATCH v2 2/8] power: pmic: mtk-pwrap: add PWRAP_CAP_WDT_SRC flag   David Lechner
  • [PATCH v2 3/8] power: pmic: mtk-pwrap: add init capability flag   David Lechner
  • [PATCH v2 4/8] power: pmic: mtk-pwrap: drop PWRAP_SLV_CAP_DUALIO on mt6359   David Lechner
  • [PATCH v2 5/8] power: pmic: mtk-pwrap: remove interrupt related code   David Lechner
    • [PATCH v2 5/8] power: pmic: mtk-pwrap: remove interrupt related code   David Lechner
  • [PATCH v2 6/8] power: pmic: mtk-pwrap: use pmic compatible to select child info   David Lechner
  • [PATCH v2 7/8] power: pmic: mtk-pwrap: use tabs for alignment   David Lechner
  • [PATCH v2 8/8] power: pmic: mtk-pwrap: add MT8195 support   David Lechner
• [PATCH] ufs: core: Fix heap corruption due to out of bounds write   Marek Vasut
  • [PATCH] ufs: core: Fix heap corruption due to out of bounds write   Neil Armstrong
• [PATCH v2] arm: Add ARMv8-M aarch32 support   Marek Vasut
  • [PATCH v2] arm: Add ARMv8-M aarch32 support   Tom Rini
    • [PATCH v2] arm: Add ARMv8-M aarch32 support   Marek Vasut
  • [PATCH v2] arm: Add ARMv8-M aarch32 support   Tom Rini
• [PATCH] arm: mediatek: enable fw loader support   Weijie Gao
  • [PATCH] arm: mediatek: enable fw loader support   David Lechner
    • [PATCH] arm: mediatek: enable fw loader support   David Lechner
      • [PATCH] arm: mediatek: enable fw loader support   Tom Rini
• [PATCH 1/2] clk: mediatek: remove redundant forward declarations   Weijie Gao
  • [PATCH 2/2] clk: mediatek: fix parent rate lookup for fixed PLL clocks   Weijie Gao
    • [PATCH 2/2] clk: mediatek: fix parent rate lookup for fixed PLL clocks   David Lechner
      • [PATCH 2/2] clk: mediatek: fix parent rate lookup for fixed PLL clocks   sam.shih
  • [PATCH 1/2] clk: mediatek: remove redundant forward declarations   David Lechner
    • [PATCH 1/2] clk: mediatek: remove redundant forward declarations   sam.shih
• [PATCH 0/2] fastboot: block: Add GPT/MBR and device selection   Balaji Selvanathan
  • [PATCH 1/2] fastboot: block: Add GPT/MBR support and device selection syntax   Balaji Selvanathan
    • [PATCH 1/2] fastboot: block: Add GPT/MBR support and device selection syntax   Mattijs Korpershoek
  • [PATCH 2/2] doc: fastboot: Document block device selection syntax   Balaji Selvanathan
    • [PATCH 2/2] doc: fastboot: Document block device selection syntax   Mattijs Korpershoek
• [PATCH] pinctrl: mediatek: mt7981: fix some register offsets and fields   Weijie Gao
  • [PATCH] pinctrl: mediatek: mt7981: fix some register offsets and fields   David Lechner
• [PATCH] common: spl: spl_nand: make CONFIG_SYS_NAND_U_BOOT_OFFS optional in spl_nand_get_uboot_raw_page()   Weijie Gao
  • [PATCH] common: spl: spl_nand: make CONFIG_SYS_NAND_U_BOOT_OFFS optional in spl_nand_get_uboot_raw_page()   Tom Rini
    • [PATCH] common: spl: spl_nand: make CONFIG_SYS_NAND_U_BOOT_OFFS optional in spl_nand_get_uboot_raw_page()   Weijie Gao
• [PATCH v2 0/9] Qualcomm IPQ5210 SoC bringup   Varadarajan Narayanan
  • [PATCH v2 1/9] dts: ipq5210-rdp504-u-boot: add override dtsi   Varadarajan Narayanan
    • [PATCH v2 1/9] dts: ipq5210-rdp504-u-boot: add override dtsi   Simon Glass
    • [PATCH v2 1/9] dts: ipq5210-rdp504-u-boot: add override dtsi   Sumit Garg
  • [PATCH v2 2/9] doc: board/qualcomm: Update RDP build instructions   Varadarajan Narayanan
    • [PATCH v2 2/9] doc: board/qualcomm: Update RDP build instructions   Simon Glass
      • [PATCH v2 2/9] doc: board/qualcomm: Update RDP build instructions   Varadarajan Narayanan
    • [PATCH v2 2/9] doc: board/qualcomm: Update RDP build instructions   Sumit Garg
      • [PATCH v2 2/9] doc: board/qualcomm: Update RDP build instructions   Simon Glass
  • [PATCH v2 3/9] clk/qcom: add initial clock driver for ipq5210   Varadarajan Narayanan
  • [PATCH v2 4/9] pinctrl: qcom: Add ipq5210 pinctrl driver   Varadarajan Narayanan
  • [PATCH v2 5/9] misc: qcom_geni: Add minicore support   Varadarajan Narayanan
    • [PATCH v2 5/9] misc: qcom_geni: Add minicore support   Simon Glass
      • [PATCH v2 5/9] misc: qcom_geni: Add minicore support   Varadarajan Narayanan
      • [PATCH v2 5/9] misc: qcom_geni: Add minicore support   Simon Glass
  • [PATCH v2 6/9] spl: Include SMEM driver in SPL   Varadarajan Narayanan
    • [PATCH v2 6/9] spl: Include SMEM driver in SPL   Simon Glass
  • [PATCH v2 7/9] mach-snapdragon: Add initial support for IPQ5210 SPL   Varadarajan Narayanan
    • [PATCH v2 7/9] mach-snapdragon: Add initial support for IPQ5210 SPL   Simon Glass
  • [PATCH v2 8/9] mach-snapdragon: Add commands to create wrapper ELF   Varadarajan Narayanan
    • [PATCH v2 8/9] mach-snapdragon: Add commands to create wrapper ELF   Simon Glass
  • [PATCH v2 9/9] configs: add qcom_ipq5210_mmc_defconfig   Varadarajan Narayanan
    • [PATCH v2 9/9] configs: add qcom_ipq5210_mmc_defconfig   Simon Glass
      • [PATCH v2 9/9] configs: add qcom_ipq5210_mmc_defconfig   Varadarajan Narayanan
  • [PATCH v2 0/9] Qualcomm IPQ5210 SoC bringup   Simon Glass
    • [PATCH v2 0/9] Qualcomm IPQ5210 SoC bringup   Varadarajan Narayanan
• [PATCH 0/3] fix 10GBE support for AMD Versal Gen 2   Pranav Tilak
  • [PATCH 1/3] net: zynq_gem: add SPEED_10000 case in clock rate selection   Pranav Tilak
  • [PATCH 3/3] net: zynq_gem: reinitialize RX BDs on every init   Pranav Tilak
  • [PATCH 0/3] fix 10GBE support for AMD Versal Gen 2   Michal Simek
• [PATCH 2/3] net: zynq_gem: set 128-bit AXI bus width for 10GBE   Pranav Tilak
• [PATCH 0/4] net: cpsw: Add cpsw-switch DT binding support   Markus Schneider-Pargmann (TI)
  • [PATCH 1/4] net: cpsw: Fix error message   Markus Schneider-Pargmann (TI)
  • [PATCH 2/4] net: cpsw: Remove compat string argument   Markus Schneider-Pargmann (TI)
    • [PATCH 2/4] net: cpsw: Remove compat string argument   Maarten Brock
      • [PATCH 2/4] net: cpsw: Remove compat string argument   Markus Schneider-Pargmann
      • [PATCH 2/4] net: cpsw: Remove compat string argument   Maarten Brock
  • [PATCH 3/4] net: cpsw: Use driver data for phy_sel   Markus Schneider-Pargmann (TI)
    • [PATCH 3/4] net: cpsw: Use driver data for phy_sel   Maarten Brock
      • [PATCH 3/4] net: cpsw: Use driver data for phy_sel   Markus Schneider-Pargmann
  • [PATCH 4/4] net: cpsw: Support new cpsw-switch DT bindings   Markus Schneider-Pargmann (TI)
• [PATCH v5 00/12] arm: am335x: Switch to upstream devicetree   Markus Schneider-Pargmann (TI)
  • [PATCH v5 01/12] arm: dts: am335x-evm: Add backlight to the panel   Markus Schneider-Pargmann (TI)
  • [PATCH v5 02/12] configs: am335x_evm_defconfig: Enable panel   Markus Schneider-Pargmann (TI)
  • [PATCH v5 03/12] include: configs: am335x_evm: Enable vidconsole   Markus Schneider-Pargmann (TI)
  • [PATCH v5 04/12] configs: am335x_evm: Enable SPL_OPTIMIZE_INLINING   Markus Schneider-Pargmann (TI)
  • [PATCH v5 05/12] configs: am335x_evm: Unify evm board defconfigs   Markus Schneider-Pargmann (TI)
    • [PATCH v5 05/12] configs: am335x_evm: Unify evm board defconfigs   Kory Maincent
  • [PATCH v5 06/12] am33xx: Avoid hard failure on USB probe issue   Markus Schneider-Pargmann (TI)
  • [PATCH v5 07/12] arm: dts: am335x-*-u-boot: Add chosen tick-timer   Markus Schneider-Pargmann (TI)
  • [PATCH v5 08/12] arm: dts: am335x-boneblack-u-boot: Add lcdc to all boot phases   Markus Schneider-Pargmann (TI)
  • [PATCH v5 09/12] am33xx: Fix comment about config symbols   Markus Schneider-Pargmann (TI)
  • [PATCH v5 10/12] am33xx: Support upstream devicetree USB device   Markus Schneider-Pargmann (TI)
  • [PATCH v5 11/12] dm: core: Split SIMPLE_PM_BUS into phases   Markus Schneider-Pargmann (TI)
    • [PATCH v5 11/12] dm: core: Split SIMPLE_PM_BUS into phases   Simon Glass
      • [PATCH v5 11/12] dm: core: Split SIMPLE_PM_BUS into phases   Markus Schneider-Pargmann
    • [PATCH v5 11/12] dm: core: Split SIMPLE_PM_BUS into phases   Kory Maincent
  • [PATCH v5 12/12] configs: am335x_evm_defconfig: Switch to upstream devicetree   Markus Schneider-Pargmann (TI)
    • [PATCH v5 12/12] configs: am335x_evm_defconfig: Switch to upstream devicetree   Fabio Estevam
      • [PATCH v5 12/12] configs: am335x_evm_defconfig: Switch to upstream devicetree   Andrew Davis
      • [PATCH v5 12/12] configs: am335x_evm_defconfig: Switch to upstream devicetree   Markus Schneider-Pargmann
    • [PATCH v5 12/12] configs: am335x_evm_defconfig: Switch to upstream devicetree   Kory Maincent
      • [PATCH v5 12/12] configs: am335x_evm_defconfig: Switch to upstream devicetree   Markus Schneider-Pargmann
• [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes   Caleb Ethridge
  • [PATCH v4 01/14] configs: sc5xx: Do not store environment in SPI flash   Caleb Ethridge
  • [PATCH v4 02/14] mach-sc5xx: Remove update commands from default environment   Caleb Ethridge
    • [PATCH v4 02/14] mach-sc5xx: Remove update commands from default environment   Greg Malysa
  • [PATCH v4 03/14] mach-sc5xx: Update boot commands   Caleb Ethridge
  • [PATCH v4 04/14] mach-sc5xx: Switch from tftp to wget   Caleb Ethridge
  • [PATCH v4 05/14] mach-sc5xx: Add USB boot command   Caleb Ethridge
  • [PATCH v4 06/14] mach-sc5xx: Remove preliminary binman support   Caleb Ethridge
  • [PATCH v4 07/14] dts: sc594: Fix gige-reset line on EZKIT   Caleb Ethridge
  • [PATCH v4 08/14] mach-sc5xx: sc573: Rename EZKIT board to EZLITE   Caleb Ethridge
  • [PATCH v4 09/14] mach-sc5xx: Update image load address   Caleb Ethridge
  • [PATCH v4 10/14] mach-sc5xx: Update SPI bootargs for ubifs   Caleb Ethridge
  • [PATCH v4 11/14] configs: sc5xx: Set default bootcmd to SPI boot   Caleb Ethridge
  • [PATCH v4 12/14] arm: sc5xx: Remove SC5XX_LOADADDR   Caleb Ethridge
  • [PATCH v4 13/14] arm: sc5xx: add missing boot env selectors   Caleb Ethridge
  • [PATCH v4 14/14] arm: sc5xx: Add fdt_addr_r, kernel_addr_r, and initrd_addr   Caleb Ethridge
• [PATCH v2 00/10] Add SPL support for Qualcomm platforms, starting with sdm845   michael.srba at seznam.cz
  • [PATCH v2 01/10] Makefile: add SPL_REMAKE_ELF_LDSCRIPT feature   michael.srba at seznam.cz
    • [PATCH v2 01/10] Makefile: add SPL_REMAKE_ELF_LDSCRIPT feature   Simon Glass
    • [PATCH v2 01/10] Makefile: add SPL_REMAKE_ELF_LDSCRIPT feature   Tom Rini
  • [PATCH v2 06/10] mach-snapdragon: Kconfig: changes / additions to support SPL   michael.srba at seznam.cz
    • [PATCH v2 06/10] mach-snapdragon: Kconfig: changes / additions to support SPL   Simon Glass
    • [PATCH v2 06/10] mach-snapdragon: Kconfig: changes / additions to support SPL   Tom Rini
      • [PATCH v2 06/10] mach-snapdragon: Kconfig: changes / additions to support SPL   Michael Srba
      • [PATCH v2 06/10] mach-snapdragon: Kconfig: changes / additions to support SPL   Tom Rini
  • [PATCH v2 09/10] qualcomm: add defconfig, env and docs for SPL on sdm845   michael.srba at seznam.cz
    • [PATCH v2 09/10] qualcomm: add defconfig, env and docs for SPL on sdm845   Simon Glass
    • [PATCH v2 09/10] qualcomm: add defconfig, env and docs for SPL on sdm845   Tom Rini
• [PATCH v2 02/10] of_live: support in SPL   michael.srba at seznam.cz
  • [PATCH v2 02/10] of_live: support in SPL   Simon Glass
• [PATCH v2 03/10] drivers: allow clk_stub and spmi in SPL   michael.srba at seznam.cz
  • [PATCH v2 03/10] drivers: allow clk_stub and spmi in SPL   Simon Glass
  • [PATCH v2 03/10] drivers: allow clk_stub and spmi in SPL   Tom Rini
• [PATCH v2 04/10] mach-snapdragon: boot0.h: split out msm8916_boot0.h   michael.srba at seznam.cz
  • [PATCH v2 04/10] mach-snapdragon: boot0.h: split out msm8916_boot0.h   Simon Glass
• [PATCH v2 05/10] mach-snapdragon: add u-boot-spl-elf-sdm845.lds   michael.srba at seznam.cz
  • [PATCH v2 05/10] mach-snapdragon: add u-boot-spl-elf-sdm845.lds   Simon Glass
• [PATCH v2 07/10] mach-snapdragon: boot0.h: add sdm845_spl_boot0.h   michael.srba at seznam.cz
  • [PATCH v2 07/10] mach-snapdragon: boot0.h: add sdm845_spl_boot0.h   Simon Glass
    • [PATCH v2 07/10] mach-snapdragon: boot0.h: add sdm845_spl_boot0.h   Michael Srba
      • [PATCH v2 07/10] mach-snapdragon: boot0.h: add sdm845_spl_boot0.h   Simon Glass
• [PATCH v2 08/10] mach-snapdragon: add board-spl.c and split out common code   michael.srba at seznam.cz
  • [PATCH v2 08/10] mach-snapdragon: add board-spl.c and split out common code   Simon Glass
• [PATCH v2 10/10] dts: add u-boot specific sdm845 .dtsi a .dtsi for shift-axolotl   michael.srba at seznam.cz
  • [PATCH v2 10/10] dts: add u-boot specific sdm845 .dtsi a .dtsi for shift-axolotl   Simon Glass
• [PATCH v1] Improve handosff prepare on SoCFPGA   Brian Sune
  • [PATCH v1] Improve handosff prepare on SoCFPGA   Chee, Tien Fong
    • [PATCH v1] Improve handosff prepare on SoCFPGA   Sune Brian
• [PATCH] serial: goldfish: Add DEBUG_UART support   Daniel Palmer
• [PATCH 00/12] test: Add support for passing arguments to C unit tests   Simon Glass
  • [PATCH 01/12] test: Add ut_asserteq_regex() for regex pattern matching   Simon Glass
  • [PATCH 02/12] test: Add a helper to check the next line against a regex   Simon Glass
  • [PATCH 03/12] test: Add a private buffer for tests   Simon Glass
  • [PATCH 04/12] test: Add argument-type definitions   Simon Glass
  • [PATCH 05/12] test: Add a macro to declare unit tests with arguments   Simon Glass
  • [PATCH 06/12] test: Add support for passing arguments to C tests   Simon Glass
  • [PATCH 07/12] test: Enhance the ut command to pass test arguments   Simon Glass
  • [PATCH 08/12] test: Add type-checked argument accessor functions   Simon Glass
  • [PATCH 09/12] test: Add tests for unit-test arguments   Simon Glass
  • [PATCH 10/12] test: Add documentation for the test framework   Simon Glass
  • [PATCH 11/12] test: fs: add C-based filesystem tests   Simon Glass
  • [PATCH 12/12] test: fs: Update Python tests to call C implementations   Simon Glass
  • [PATCH 00/12] test: Add support for passing arguments to C unit tests   Simon Glass
• [PATCH 1/2] linker_lists: Fix end-marker alignment to prevent padding   Simon Glass
  • [PATCH 1/2] linker_lists: Fix end-marker alignment to prevent padding   Tom Rini
  • [PATCH 1/2] linker_lists: Fix end-marker alignment to prevent padding   Rasmus Villemoes
    • [PATCH 1/2] linker_lists: Fix end-marker alignment to prevent padding   Tom Rini
      • [PATCH 1/2] linker_lists: Fix end-marker alignment to prevent padding   Simon Glass
• [PATCH] doc: board: ti: j784s4_evm: Automate BAR address lookup for PCIe Boot   Siddharth Vadapalli
• [PATCH] video: bridge: add ITE IT66121 DPI-to-HDMI bridge driver   Shaurya Rane
  • [PATCH] video: bridge: add ITE IT66121 DPI-to-HDMI bridge driver   Shaurya Rane
    • [PATCH] video: bridge: add ITE IT66121 DPI-to-HDMI bridge driver   Simon Glass
      • [PATCH] video: bridge: add ITE IT66121 DPI-to-HDMI bridge driver   SHAURYA RANE
• [PATCH] board/raspberrypi: Add quirk for RPi5 2Gb rev 1.0   Peter Robinson
• [PATCH v2 00/12] test: Add support for passing arguments to C unit tests   Simon Glass
  • [PATCH v2 01/12] test: Add ut_asserteq_regex() for regex pattern matching   Simon Glass
  • [PATCH v2 02/12] test: Add a helper to check the next line against a regex   Simon Glass
  • [PATCH v2 03/12] test: Add a private buffer for tests   Simon Glass
  • [PATCH v2 04/12] test: Add argument-type definitions   Simon Glass
  • [PATCH v2 05/12] test: Add a macro to declare unit tests with arguments   Simon Glass
  • [PATCH v2 06/12] test: Add support for passing arguments to C tests   Simon Glass
  • [PATCH v2 07/12] test: Enhance the ut command to pass test arguments   Simon Glass
  • [PATCH v2 08/12] test: Add type-checked argument accessor functions   Simon Glass
  • [PATCH v2 09/12] test: Add tests for unit-test arguments   Simon Glass
  • [PATCH v2 10/12] test: Add documentation for the test framework   Simon Glass
  • [PATCH v2 11/12] test: fs: add C-based filesystem tests   Simon Glass
  • [PATCH v2 12/12] test: fs: Update Python tests to call C implementations   Simon Glass
  • [PATCH v2 00/12] test: Add support for passing arguments to C unit tests   Tom Rini
    • [PATCH v2 00/12] test: Add support for passing arguments to C unit tests   Simon Glass
  • [PATCH v2 00/12] test: Add support for passing arguments to C unit tests   Tom Rini
    • [PATCH v2 00/12] test: Add support for passing arguments to C unit tests   Simon Glass
• [PATCH v1 0/5] SoCFPGA: Update DDR Support for Gen5/Arria10 in U-Boot   Sune Brian
  • [PATCH v1 0/5] SoCFPGA: Update DDR Support for Gen5/Arria10 in U-Boot   Yuslaimi, Alif Zakuan
    • [PATCH v1 0/5] SoCFPGA: Update DDR Support for Gen5/Arria10 in U-Boot   Sune Brian
• [PATCH] mips: mtmips: align MT7621 image blobs to 8-byte boundary   Shiji Yang
  • [PATCH] mips: mtmips: align MT7621 image blobs to 8-byte boundary   Weijie Gao
• [PATCH v2 2/3] m68k: m680x0: Initialise the debug uart   Angelo Dureghello
• [PATCH] video: stm32: dsi: fix unchecked return values   Raphael Gallais-Pou
• [PATCH 0/8] add memdup_nul(), use it and memdup() in a few places   Rasmus Villemoes
  • [PATCH 5/8] lib/string.c: implement strdup() and strndup() in terms of memdup_nul()   Rasmus Villemoes
    • [PATCH 5/8] lib/string.c: implement strdup() and strndup() in terms of memdup_nul()   Simon Glass
  • [PATCH 7/8] common/cli.c: use memdup_nul() in run_command_list()   Rasmus Villemoes
    • [PATCH 7/8] common/cli.c: use memdup_nul() in run_command_list()   Simon Glass
  • [PATCH 8/8] drivers/core: use memdup() instead of malloc()+memcpy()   Rasmus Villemoes
    • [PATCH 8/8] drivers/core: use memdup() instead of malloc()+memcpy()   Simon Glass
  • [0/8] add memdup_nul(), use it and memdup() in a few places   Simon Glass
• [PATCH 1/8] string: fix prototype of memdup()   Rasmus Villemoes
  • [PATCH 1/8] string: fix prototype of memdup()   Simon Glass
• [PATCH 2/8] stdio: drop stdio_clone   Rasmus Villemoes
  • [PATCH 2/8] stdio: drop stdio_clone   Simon Glass
• [PATCH 3/8] lib/string.c: drop pointless __HAVE_ARCH_STRDUP   Rasmus Villemoes
  • [PATCH 3/8] lib/string.c: drop pointless __HAVE_ARCH_STRDUP   Simon Glass
• [PATCH 4/8] lib/string.c: introduce memdup_nul() helper   Rasmus Villemoes
  • [PATCH 4/8] lib/string.c: introduce memdup_nul() helper   Simon Glass
• [PATCH 6/8] lib/hashtable.c: use memdup_nul() in himport_r   Rasmus Villemoes
  • [PATCH 6/8] lib/hashtable.c: use memdup_nul() in himport_r   Simon Glass
• [PATCH 1/1] doc: correct title of CONTRIBUTE.rst   Heinrich Schuchardt
  • [PATCH 1/1] doc: correct title of CONTRIBUTE.rst   Simon Glass
• [PATCH v2] drivers: fpga: Use SOC64 conditional instead of Agilex/Stratix10   Chee, Tien Fong
  • [PATCH v2] drivers: fpga: Use SOC64 conditional instead of Agilex/Stratix10   LOK, CHEN HUEI
• [PATCH] cmd: mmc: allow 'mmc rst-function' to show the current value   Rasmus Villemoes
  • [PATCH] cmd: mmc: allow 'mmc rst-function' to show the current value   Simon Glass
• [PATCH v2 0/2] net: enetc: add i.MX952 support   alice.guo at oss.nxp.com
  • [PATCH v2 1/2] net: fsl_enetc: fix the duplex setting on the iMX platform   alice.guo at oss.nxp.com
    • [PATCH v2 1/2] net: fsl_enetc: fix the duplex setting on the iMX platform   Peng Fan
  • [PATCH v2 2/2] net: fsl_enetc: Add support for i.MX952   alice.guo at oss.nxp.com
    • [PATCH v2 2/2] net: fsl_enetc: Add support for i.MX952   Peng Fan
      • 回复: [PATCH v2 2/2] net: fsl_enetc: Add support for i.MX952   Alice Guo (OSS)
• [PATCH v1] arm: socfpga: soc64: separate reset manager into common and platform-family parts   Chee, Tien Fong
  • [PATCH v1] arm: socfpga: soc64: separate reset manager into common and platform-family parts   Lok, Chen Huei
• [PATCH 3/3] power: pmic: mtk-pwrap: drop PWRAP_SLV_CAP_DUALIO on mt6359   Macpaul Lin (林智斌)
• [PATCH v1] arch: arm: dts: agilex5: Enable autostart on watchdog0 only   Chee, Tien Fong
• [PATCH v4 0/6] Add virtio-mmio support to m68k virt machine   Daniel Palmer
  • [PATCH v4 1/6] sysreset: qemu virt: Use __raw_writel()   Daniel Palmer
  • [PATCH v4 2/6] m68k: Fix writew(), writel(), readw(), readl() endianness for classic m68k   Daniel Palmer
    • [PATCH v4 2/6] m68k: Fix writew(), writel(), readw(), readl() endianness for classic m68k   Angelo Dureghello
      • [PATCH v4 2/6] m68k: Fix writew(), writel(), readw(), readl() endianness for classic m68k   Daniel Palmer
    • [PATCH v4 2/6] m68k: Fix writew(), writel(), readw(), readl() endianness for classic m68k   Kuan-Wei Chiu
  • [PATCH v4 3/6] virtio: mmio: Allow instantiation via platform data   Daniel Palmer
    • [PATCH v4 3/6] virtio: mmio: Allow instantiation via platform data   Angelo Dureghello
    • [PATCH v4 3/6] virtio: mmio: Allow instantiation via platform data   Kuan-Wei Chiu
  • [PATCH v4 4/6] virtio: cmd: Depend on VIRTIO_BLK   Daniel Palmer
    • [PATCH v4 4/6] virtio: cmd: Depend on VIRTIO_BLK   Simon Glass
    • [PATCH v4 4/6] virtio: cmd: Depend on VIRTIO_BLK   Tom Rini
    • [PATCH v4 4/6] virtio: cmd: Depend on VIRTIO_BLK   Angelo Dureghello
    • [PATCH v4 4/6] virtio: cmd: Depend on VIRTIO_BLK   Kuan-Wei Chiu
  • [PATCH v4 5/6] virtio: blk: Fix converting the vendor id to a string   Daniel Palmer
    • [PATCH v4 5/6] virtio: blk: Fix converting the vendor id to a string   Kuan-Wei Chiu
  • [PATCH v4 6/6] board: qemu: m68k: Create virtio mmio instances   Daniel Palmer
    • [PATCH v4 6/6] board: qemu: m68k: Create virtio mmio instances   Simon Glass
    • [PATCH v4 6/6] board: qemu: m68k: Create virtio mmio instances   Angelo Dureghello
    • [PATCH v4 6/6] board: qemu: m68k: Create virtio mmio instances   Kuan-Wei Chiu
  • [PATCH v4 0/6] Add virtio-mmio support to m68k virt machine   Kuan-Wei Chiu
    • [PATCH v4 0/6] Add virtio-mmio support to m68k virt machine   Daniel Palmer
• [PATCH] clk: qcom: sc7280: add missing SDCC1 clocks   Sumit Garg
• [PATCH v1 1/2] arch: arm: dts: socfpga: Update L4_SYS Security Control Register size   Chee, Tien Fong
• [PATCH 1/3] clk: qcom: qcs615: Add SDCC1 and SDCC2 clock support   Sumit Garg
• [PATCH v1 2/2] arch: arm: dts: socfpga: Update system manager core registers masking bits   Chee, Tien Fong
• [PATCH] arch: arm: mach-socfpga: Change U-Boot mailbox client ID   Chee, Tien Fong
• [PATCH 2/3] drivers: mmc: uclass: Set removable flag based on device tree property   Sumit Garg
  • [PATCH 2/3] drivers: mmc: uclass: Set removable flag based on device tree property   Balaji Selvanathan
• [PATCH] drivers: fpga: arria10: Clean up dead code   Chee, Tien Fong
  • [PATCH] drivers: fpga: arria10: Clean up dead code   Maniyam, Dinesh
• [PATCH v1] drivers: clk: agilex5: Setting correct counter frequency in boot mode   NG, BOON KHAI
  • [PATCH v1] drivers: clk: agilex5: Setting correct counter frequency in boot mode   NG, BOON KHAI
    • [PATCH v1] drivers: clk: agilex5: Setting correct counter frequency in boot mode   Chee, Tien Fong
• [PATCH] drivers: clk: altera: arria10: Fix wrong API used for memory free   Chee, Tien Fong
  • [PATCH] drivers: clk: altera: arria10: Fix wrong API used for memory free   Maniyam, Dinesh
• [PATCH 0/3] Qualcomm: rpmh and regulator fixes   Casey Connolly
  • [PATCH 1/3] soc/qcom: rpmh: properly fix synchronous requests   Casey Connolly
  • [PATCH 2/3] soc/qcom: rpmh: only allow rpmh writes of a single command   Casey Connolly
  • [PATCH 3/3] power: regulator: qcom-rpmh: propagate votes to parent supplies   Casey Connolly
• [PATCH v2 1/3] arm: dts: qcs615-ride: Remove unsupported USB clock reference   Casey Connolly
• [PATCH 5/5] drivers: ufs: qcom: Initialize and enable clocks before hardware access   Casey Connolly
  • [PATCH 5/5] drivers: ufs: qcom: Initialize and enable clocks before hardware access   Balaji Selvanathan
• [PATCH v3 0/8] test: Refactor FIT test for clarity and extensibility   Simon Glass
  • [PATCH v3 8/8] test: Add documentation for the FIT test   Simon Glass
  • [PATCH v3 0/8] test: Refactor FIT test for clarity and extensibility   Tom Rini
• [PATCH v3 1/8] test: fit: Drop the fit_signature buildconfigspec   Simon Glass
• [PATCH v3 2/8] test: fit: Avoid restarting U-Boot   Simon Glass
• [PATCH v3 3/8] test: Rename test_fit() to test_fit_base()   Simon Glass
• [PATCH v3 4/8] test: Add a check for a missing kernel   Simon Glass
• [PATCH v3 5/8] test: Update fit test to fix a few Python warnings   Simon Glass
• [PATCH v3 6/8] test: Convert FIT test to use a class   Simon Glass
• [PATCH v3 7/8] test: Add fsetup fixture and prepare helper for FIT test   Simon Glass
• [PATCH v4 1/2] kbuild: Move U-Boot .incbin rules to Makefile.lib-u-boot   Simon Glass
  • [PATCH v4 2/2] kbuild: Use if_changed for font and splash .incbin rules   Simon Glass
    • [PATCH v4 2/2] kbuild: Use if_changed for font and splash .incbin rules   Rasmus Villemoes
  • [PATCH v4 1/2] kbuild: Move U-Boot .incbin rules to Makefile.lib-u-boot   Rasmus Villemoes
  • [PATCH v4 1/2] kbuild: Move U-Boot .incbin rules to Makefile.lib-u-boot   Tom Rini
• [PATCH v2] boot: Add fit_config_get_hash_list() to build signed node list   Simon Glass
• [PATCH v4 1/2] console: add console_flush_stdin()   Gregor Herburger
  • [PATCH v4 2/2] cli: flush stdin before enabling cli   Gregor Herburger
  • [PATCH v4 1/2] console: add console_flush_stdin()   Tom Rini
• [PATCHv3 0/6] various memory related fixups   rs at ti.com
  • [PATCHv3 1/6] lmb: allocation flags macro documentation   rs at ti.com
    • [PATCHv3 1/6] lmb: allocation flags macro documentation   Ilias Apalodimas
      • [PATCHv3 1/6] lmb: allocation flags macro documentation   Heinrich Schuchardt
    • [PATCHv3 1/6] lmb: allocation flags macro documentation   Simon Glass
  • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   rs at ti.com
    • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Ilias Apalodimas
      • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Randolph Sapp
      • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Ilias Apalodimas
      • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Randolph Sapp
      • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Ilias Apalodimas
      • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Randolph Sapp
      • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Ilias Apalodimas
      • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Randolph Sapp
      • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Randolph Sapp
      • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Ilias Apalodimas
      • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Ilias Apalodimas
    • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Simon Glass
      • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Randolph Sapp
      • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Simon Glass
      • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Randolph Sapp
      • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Simon Glass
    • [PATCHv3 2/6] lmb: add LMB_FDT for fdt reserved regions   Simon Glass
  • [PATCHv3 4/6] efi_selftest_memory: check for duplicates first   rs at ti.com
    • [PATCHv3 4/6] efi_selftest_memory: check for duplicates first   Ilias Apalodimas
      • [PATCHv3 4/6] efi_selftest_memory: check for duplicates first   Randolph Sapp
      • [PATCHv3 4/6] efi_selftest_memory: check for duplicates first   Ilias Apalodimas
      • [PATCHv3 4/6] efi_selftest_memory: check for duplicates first   Randolph Sapp
      • [PATCHv3 4/6] efi_selftest_memory: check for duplicates first   Ilias Apalodimas
    • [PATCHv3 4/6] efi_selftest_memory: check for duplicates first   Simon Glass
  • [PATCHv3 5/6] efi_mem_sort: use list_for_each_entry_safe instead   rs at ti.com
    • [PATCHv3 5/6] efi_mem_sort: use list_for_each_entry_safe instead   Ilias Apalodimas
    • [PATCHv3 5/6] efi_mem_sort: use list_for_each_entry_safe instead   Simon Glass
  • [PATCHv3 6/6] memory: reserve from start_addr_sp to end_addr_sp   rs at ti.com
    • [PATCHv3 6/6] memory: reserve from start_addr_sp to end_addr_sp   Ilias Apalodimas
      • [PATCHv3 6/6] memory: reserve from start_addr_sp to end_addr_sp   Randolph Sapp
      • [PATCHv3 6/6] memory: reserve from start_addr_sp to end_addr_sp   Randolph Sapp
      • [PATCHv3 6/6] memory: reserve from start_addr_sp to end_addr_sp   Ilias Apalodimas
    • [PATCHv3 6/6] memory: reserve from start_addr_sp to end_addr_sp   Simon Glass
      • [PATCHv3 6/6] memory: reserve from start_addr_sp to end_addr_sp   Randolph Sapp
• [PATCHv3 3/6] efi_dt_fixup: use fdtdec_get_bool   rs at ti.com
  • [PATCHv3 3/6] efi_dt_fixup: use fdtdec_get_bool   Simon Glass
• [PATCH] config_distro_bootcmd: do not scan boot partitions if distro_bootpart is defined   Tom Rini
• (subset) [PATCH 1/3] board: samsung: fix set_board_info() board_name buffer overflow   Tom Rini
• [PATCH] arm: socfpga: Remove confusing timer related words from watchdog reset   Chee, Tien Fong
• [PATCH 00/11] mtd: spi-nor: Isolate stacked/parallel support from core   Takahiro.Kuwano at infineon.com
  • [PATCH 00/11] mtd: spi-nor: Isolate stacked/parallel support from core   Begari, Padmarao
• [PATCH v1] usb: dwc3: core: fix memory leaks in event buffer cleanup   Marek Vasut
  • [PATCH v1] usb: dwc3: core: fix memory leaks in event buffer cleanup   Gurumoorthy Santhakumar
    • [PATCH v1] usb: dwc3: core: fix memory leaks in event buffer cleanup   Gurumoorthy Santhakumar
  • [PATCH v1] usb: dwc3: core: fix memory leaks in event buffer cleanup   Gurumoorthy Santhakumar
• [PATCH v1] ddr: altera: Add delay before writing to MBRDADDR register   Chee, Tien Fong
• [PATCH v1] arch: arm: socfpga: Fix data cache flush issue   Chee, Tien Fong
• [PATCH v1] clk: altera: agilex: Update sync to async mode config in clk pll   Chee, Tien Fong
• [PATCH] common: spl: nand: improve u-boot offsets overriding   Weijie Gao
  • [PATCH] common: spl: nand: improve u-boot offsets overriding   Tom Rini
• [PATCH] board: ti: cape_detect: Add overlay name lookup table for extension boards   Kory Maincent
  • [PATCH] board: ti: cape_detect: Add overlay name lookup table for extension boards   Andrew Davis
    • [PATCH] board: ti: cape_detect: Add overlay name lookup table for extension boards   Kory Maincent
• [PATCH v3] drivers: fpga: Use SOC64 conditional instead of Agilex/Stratix10   Chen Huei Lok
• [PATCH] board: stm32pm1: Fix board_check_usb_power()   Patrice Chotard
  • [PATCH] board: stm32pm1: Fix board_check_usb_power()   Kory Maincent
• [PATCH] misc: Add RZG2L OTP support   Mathieu Othacehe
  • [PATCH] misc: Add RZG2L OTP support   Tom Rini
  • [PATCH] misc: Add RZG2L OTP support   Marek Vasut
    • [PATCH] misc: Add RZG2L OTP support   Mathieu Othacehe
      • [PATCH] misc: Add RZG2L OTP support   Marek Vasut
      • [PATCH] misc: Add RZG2L OTP support   Mathieu Othacehe
      • [PATCH] misc: Add RZG2L OTP support   Marek Vasut
• [PATCH v2] board: ti: cape_detect: Add overlay name lookup table for extension boards   Kory Maincent
  • [PATCH v2] board: ti: cape_detect: Add overlay name lookup table for extension boards   Tom Rini
• [PATCH] imx93: Add support for OPTEE   Krzysztof Drobiński
  • [PATCH] imx93: Add support for OPTEE   Fabio Estevam
• [PATCH 0/2] A few linker-list fixes   Tom Rini
• [RESEND PATCH] powerpc: fix dead default for SYS_L3_SIZE   Julian Braha
• [PATCH v2 1/3] serial: goldfish: Add debug uart support   Tom Rini
• [PATCH 1/1] x86/apollolake: don't select non-existent INTEL_PMC   Tom Rini
• [PATCH 1/1] x86: there is no CONFIG_UBOOT_ROMSIZE_KB_12288   Tom Rini
  • [PATCH 0/2] arm: dts: socfpga: agilex5: Improve MMC/SD device tree organization   tze.yee.ng at altera.com
  • [PATCH 0/2] arm: dts: socfpga: agilex5: Improve MMC/SD device tree organization   tze.yee.ng at altera.com
  • [PATCH 1/2] arm: dts: socfpga: agilex5: Move mmc node differs from base board dtsi to dts   tze.yee.ng at altera.com
  • [PATCH 2/2] arm: dts: socfpga: Remove SD card properties from Agilex5 eMMC device tree   tze.yee.ng at altera.com
  • [PATCH 1/2] arm: dts: socfpga: agilex5: Move mmc node differs from base board dtsi to dts   tze.yee.ng at altera.com
  • [PATCH 2/2] arm: dts: socfpga: Remove SD card properties from Agilex5 eMMC device tree   tze.yee.ng at altera.com
• [PATCH v1] configs: Enable CONFIG_WDT configurations for cyclone5   Chee, Tien Fong
• [PATCH v1] configs: agilex: enable FPGA Partial Reconfiguration command   Chee, Tien Fong
• [PATCH v1] arm: socfpga: Gen5/A10: Enable Designware watchdog   Chee, Tien Fong
• [PATCH v2] arm: socfpga: soc64: separate reset manager into common and platform-family parts   Chen Huei Lok
• [PATCH v1] spi: cadence_xspi: enable automatic platform data allocation   Lok, Chen Huei
  • [PATCH v1] spi: cadence_xspi: enable automatic platform data allocation   Tom Rini
• [PATCH v1] mtd: spi-nor-ids: Add support for IS25WP01GG SPI NOR flash   Lok, Chen Huei
  • [PATCH v1] mtd: spi-nor-ids: Add support for IS25WP01GG SPI NOR flash   Tom Rini
• [PATCH 1/3] arm: socfpga: Use custom header target buffer in SPL   Chee, Tien Fong
  • [PATCH 1/3] arm: socfpga: Use custom header target buffer in SPL   Maniyam, Dinesh
• [PATCH v2] drivers: clk: altera: arria10: Fix wrong API used for memory free   dinesh.maniyam at altera.com
• [PATCH v2] drivers: fpga: arria10: Remove unreachable code.   dinesh.maniyam at altera.com
• [PATCH] dts: lemans-evk-u-boot: add override dtsi   Sumit Garg
• [PATCH 2/3] arm: socfpga: Add SPL fitImage config match   Chee, Tien Fong
• [PATCH] arm: socfpga: Add NAND register address and data register   Chee, Tien Fong
• [PATCH v3 00/16] Add board support for Spacemit K1 SoC in SPL   Vincent Legoll
  • [PATCH v3 00/16] Add board support for Spacemit K1 SoC in SPL   Raymond Mao
• [PATCH v2] common: spl: nand: improve u-boot offsets overriding   Weijie Gao
• [PATCH] arm: socfpga: Ensure FPGA in user mode before enabling the bridges   Chee, Tien Fong
  • [PATCH] arm: socfpga: Ensure FPGA in user mode before enabling the bridges   Maniyam, Dinesh
• [PATCH 0/2] net: fsl_enetc: Add iMX95 10Gbps support and PHY fixes   alice.guo at oss.nxp.com
  • [PATCH v1 1/2] net: phy: aquantia: Increase timeout for out of reset   alice.guo at oss.nxp.com
    • [PATCH v1 1/2] net: phy: aquantia: Increase timeout for out of reset   Tim Harvey
      • 回复: [PATCH v1 1/2] net: phy: aquantia: Increase timeout for out of reset   Alice Guo (OSS)
  • [PATCH v1 2/2] net: fsl_enetc: Add iMX95 enetc4 10Gbps port support   alice.guo at oss.nxp.com
• [PATCH v1] arm: dts: agilex5: Set DTB filename and kernel node removal for non-secure boot   Chee, Tien Fong
• [PATCH v1] include: configs: socfpga: Add environment variables for distro boot   Chee, Tien Fong
• [PATCH] drivers: watchdog: Enhance watchdog support in SPL for N5X   Chee, Tien Fong
  • [PATCH] drivers: watchdog: Enhance watchdog support in SPL for N5X   Maniyam, Dinesh
• [PATCH V3] board: dhelectronics: imx: Use second Ethernet MAC also from fuse   Christoph Niedermaier
  • [PATCH V3] board: dhelectronics: imx: Use second Ethernet MAC also from fuse   Marek Vasut
  • [PATCH V3] board: dhelectronics: imx: Use second Ethernet MAC also from fuse   Marek Vasut
    • [PATCH V3] board: dhelectronics: imx: Use second Ethernet MAC also from fuse   Fabio Estevam
• [PATCH] imx: imx9: Select ARCH_MISC_INIT for all i.MX9 SoCs   Primoz Fiser
  • [PATCH] imx: imx9: Select ARCH_MISC_INIT for all i.MX9 SoCs   Peng Fan
    • [PATCH] imx: imx9: Select ARCH_MISC_INIT for all i.MX9 SoCs   Primoz Fiser
      • [PATCH] imx: imx9: Select ARCH_MISC_INIT for all i.MX9 SoCs   Peng Fan
• [PATCH v3 0/3] Autoboot prompt customization and bootmenu cosmetics   Ferass El Hafidi
  • [PATCH v3 2/3] cmd: bootmenu: ANSI_CLEAR_LINE before entry name   Ferass El Hafidi
  • [PATCH v3 3/3] doc: usage: convert autoboot README to rST   Ferass El Hafidi
    • [PATCH v3 3/3] doc: usage: convert autoboot README to rST   Heinrich Schuchardt
      • [PATCH v3 3/3] doc: usage: convert autoboot README to rST   Ferass El Hafidi
      • [PATCH v3 3/3] doc: usage: convert autoboot README to rST   Heinrich Schuchardt
      • [PATCH v3 3/3] doc: usage: convert autoboot README to rST   Ferass El Hafidi
• [PATCH v3 1/3] autoboot: allow custom prompt without requiring AUTOBOOT_KEYED   Ferass El Hafidi
• [PATCH] sandbox: enable FIT_SIGNATURE   Philippe Reynes
  • [PATCH] sandbox: enable FIT_SIGNATURE   Simon Glass
  • [PATCH] sandbox: enable FIT_SIGNATURE   Tom Rini
• [PATCH v2 0/3] j721s2: j784s4: Add workaround for errata i2437   Udit Kumar
  • [PATCH v2 1/3] arm: mach-k3: arm: mach-k3: Add writel_verify macro for register write verification   Udit Kumar
  • [PATCH v2 2/3] arch: mach-k3: j721s2_init: Add workaround for errata i2437   Udit Kumar
  • [PATCH v2 3/3] arch: mach-k3: j784s4_init: Add workaround for errata i2437   Udit Kumar
• [PATCH v6 00/14] arm: am335x: Switch to upstream devicetree   Markus Schneider-Pargmann (TI)
  • [PATCH v6 01/14] arm: dts: am335x-evm: Add backlight to the panel   Markus Schneider-Pargmann (TI)
  • [PATCH v6 02/14] configs: am335x_evm_defconfig: Enable panel   Markus Schneider-Pargmann (TI)
  • [PATCH v6 03/14] include: configs: am335x_evm: Enable vidconsole   Markus Schneider-Pargmann (TI)
  • [PATCH v6 04/14] configs: am335x_evm: Enable SPL_OPTIMIZE_INLINING   Markus Schneider-Pargmann (TI)
  • [PATCH v6 05/14] configs: am335x_evm: Unify evm board defconfigs   Markus Schneider-Pargmann (TI)
  • [PATCH v6 06/14] am33xx: Avoid hard failure on USB probe issue   Markus Schneider-Pargmann (TI)
  • [PATCH v6 07/14] arm: dts: am335x-*-u-boot: Add chosen tick-timer   Markus Schneider-Pargmann (TI)
  • [PATCH v6 08/14] arm: dts: am335x-boneblack-u-boot: Add lcdc to all boot phases   Markus Schneider-Pargmann (TI)
  • [PATCH v6 09/14] am33xx: Fix comment about config symbols   Markus Schneider-Pargmann (TI)
  • [PATCH v6 10/14] am33xx: Support upstream devicetree USB device   Markus Schneider-Pargmann (TI)
  • [PATCH v6 11/14] dm: core: Split SIMPLE_PM_BUS into phases   Markus Schneider-Pargmann (TI)
  • [PATCH v6 12/14] arm: dts: am335x-bonegreen-eco-u-boot: Add include of bone-common   Markus Schneider-Pargmann (TI)
    • [PATCH v6 12/14] arm: dts: am335x-bonegreen-eco-u-boot: Add include of bone-common   Andrew Davis
      • [PATCH v6 12/14] arm: dts: am335x-bonegreen-eco-u-boot: Add include of bone-common   Markus Schneider-Pargmann
  • [PATCH v6 13/14] configs: am335x_evm_defconfig: Switch to upstream devicetree   Markus Schneider-Pargmann (TI)
  • [PATCH v6 14/14] arm: dts: am335x: Remove unused uboot devicetrees   Markus Schneider-Pargmann (TI)
    • [PATCH v6 14/14] arm: dts: am335x: Remove unused uboot devicetrees   Andrew Davis
  • [PATCH v6 00/14] arm: am335x: Switch to upstream devicetree   Kory Maincent
    • [PATCH v6 00/14] arm: am335x: Switch to upstream devicetree   Kory Maincent
      • [PATCH v6 00/14] arm: am335x: Switch to upstream devicetree   Markus Schneider-Pargmann
      • [PATCH v6 00/14] arm: am335x: Switch to upstream devicetree   Markus Schneider-Pargmann
      • [PATCH v6 00/14] arm: am335x: Switch to upstream devicetree   Markus Schneider-Pargmann
  • [PATCH v6 00/14] arm: am335x: Switch to upstream devicetree   Judith Mendez
    • [PATCH v6 00/14] arm: am335x: Switch to upstream devicetree   Judith Mendez
      • [PATCH v6 00/14] arm: am335x: Switch to upstream devicetree   Markus Schneider-Pargmann
• [PATCH v1] mtd: spi: Add ISSI QSPI to lightweight SPI flash stack for spl   Tom Rini
• [PATCH v3 0/7] Support metadata-driven A/B boot for STM32MP25   Dario Binacchi
  • [PATCH v3 1/7] lib: uuid: add partition type GUID for extended bootloader   Dario Binacchi
  • [PATCH v3 2/7] test: dm: part: add test for part_get_info_by_uuid   Dario Binacchi
  • [PATCH v3 3/7] test: cmd: add unit tests for part command   Dario Binacchi
    • [PATCH v3 3/7] test: cmd: add unit tests for part command   Simon Glass
  • [PATCH v3 4/7] cmd: part: support lookup by UUID   Dario Binacchi
  • [PATCH v3 5/7] test: cmd: part: add UUID lookup tests   Dario Binacchi
  • [PATCH v3 6/7] fwu: add helper to get image GUID by type and bank index   Dario Binacchi
    • [PATCH v3 6/7] fwu: add helper to get image GUID by type and bank index   Simon Glass
    • [PATCH v3 6/7] fwu: add helper to get image GUID by type and bank index   Ilias Apalodimas
  • [PATCH v3 7/7] board: st: stm32mp25: support dynamic A/B bank bootup   Dario Binacchi
• [RESEND PATCH] video: Kconfig: fix indentation of help text   Dario Binacchi
  • [RESEND PATCH] video: Kconfig: fix indentation of help text   Heinrich Schuchardt
• [PATCH v2] video: Kconfig: fix indentation of help text   Dario Binacchi
• [PATCH v2] video: kconfig: replace tristate with bool for LCD panel drivers   Dario Binacchi
• [PATCH v3] video: Kconfig: fix indentation of help text   Dario Binacchi
• [PATCH v1] drivers: cadence_qspi_apb: Add 1us delays in polling loops   Tom Rini
  • [PATCH v1] drivers: cadence_qspi_apb: Add 1us delays in polling loops   Tom Rini
• [PATCH 1/1] sunxi: use vendor prefix for $fdtfile on RISC-V too   Heinrich Schuchardt
  • [PATCH 1/1] sunxi: use vendor prefix for $fdtfile on RISC-V too   Andre Przywara
• [PATCH] lib/Kconfig: Fix SUPPORTS_FW_LOADER option   David Lechner
  • [PATCH] lib/Kconfig: Fix SUPPORTS_FW_LOADER option   Tom Rini
  • [PATCH] lib/Kconfig: Fix SUPPORTS_FW_LOADER option   Weijie Gao
  • [PATCH] lib/Kconfig: Fix SUPPORTS_FW_LOADER option   Tom Rini
• [PATCH] ufs: rcar-gen5: Update line reset configuration   Marek Vasut
  • [PATCH] ufs: rcar-gen5: Update line reset configuration   Neil Armstrong
• [PATCH] watchdog: Add Renesas R-Car Gen5 window watchdog driver   Marek Vasut
  • [PATCH] watchdog: Add Renesas R-Car Gen5 window watchdog driver   Stefan Roese
• [PATCH] remoteproc: renesas: Add Renesas R-Car Gen5 remote processor driver   Marek Vasut
• [PATCH] usb: gadget: renesas: add support for RZ/G2L SoC   Marek Vasut
  • [PATCH] usb: gadget: renesas: add support for RZ/G2L SoC   Michele Bisogno
  • [PATCH] usb: gadget: renesas: add support for RZ/G2L SoC   Michele Bisogno
    • [PATCH] usb: gadget: renesas: add support for RZ/G2L SoC   Marek Vasut
      • [PATCH] usb: gadget: renesas: add support for RZ/G2L SoC   Michele Bisogno
      • [PATCH] usb: gadget: renesas: add support for RZ/G2L SoC   Marek Vasut
• [PATCH] arm: arria10: Add correct mask bits for RTRIM and PU_DRV_STRG   Chee, Tien Fong
• [PATCH v2 0/7] fit: dm-verity support   Daniel Golle
  • [PATCH v2 1/7] image: fit: add dm-verity property name constants   Daniel Golle
    • [PATCH v2 1/7] image: fit: add dm-verity property name constants   Tom Rini
  • [PATCH v2 2/7] boot: fit: support generating DM verity cmdline parameters   Daniel Golle
    • [PATCH v2 2/7] boot: fit: support generating DM verity cmdline parameters   Simon Glass
  • [PATCH v2 3/7] include: hexdump: make hex2bin() usable from host tools   Daniel Golle
    • Re: [PATCH v2 3/7] include: hexdump: make hex2bin() usable from host tools   Heinrich Schuchardt
      • [PATCH v2 3/7] include: hexdump: make hex2bin() usable from host tools   Daniel Golle
    • [PATCH v2 3/7] include: hexdump: make hex2bin() usable from host tools   Simon Glass
  • [PATCH v2 4/7] tools: mkimage: add dm-verity Merkle-tree generation   Daniel Golle
    • [PATCH v2 4/7] tools: mkimage: add dm-verity Merkle-tree generation   Simon Glass
  • [PATCH v2 5/7] doc: fit: add dm-verity boot parameter documentation   Daniel Golle
    • [PATCH v2 5/7] doc: fit: add dm-verity boot parameter documentation   Simon Glass
  • [PATCH v2 6/7] test: boot: add runtime unit test for fit_verity_build_cmdline()   Daniel Golle
    • [PATCH v2 6/7] test: boot: add runtime unit test for fit_verity_build_cmdline()   Simon Glass
      • [PATCH v2 6/7] test: boot: add runtime unit test for fit_verity_build_cmdline()   Daniel Golle
      • [PATCH v2 6/7] test: boot: add runtime unit test for fit_verity_build_cmdline()   Simon Glass
  • [PATCH v2 7/7] test: py: add mkimage dm-verity round-trip test   Daniel Golle
    • [PATCH v2 7/7] test: py: add mkimage dm-verity round-trip test   Simon Glass
      • [PATCH v2 7/7] test: py: add mkimage dm-verity round-trip test   Daniel Golle
      • [PATCH v2 7/7] test: py: add mkimage dm-verity round-trip test   Simon Glass
  • [PATCH v2 0/7] fit: dm-verity support   Daniel Golle
    • [PATCH v2 0/7] fit: dm-verity support   Marek Vasut
      • [PATCH v2 0/7] fit: dm-verity support   Daniel Golle
• [PATCH v2] configs: socfpga: arria10: Disable CONFIG_SPL_USE_TINY_PRINTF   Chee, Tien Fong
• [PATCH] arm: socfpga: Enable MMC secure transaction in SPL.   Chee, Tien Fong
• [PATCH] arch: arm: agilex5: Configure DFISEL for SDMMC/NAND   Chee, Tien Fong
• [PATCH v2] mmc: msm_sdhci: Use max-frequency to get clock rate   Varadarajan Narayanan
  • [PATCH v2] mmc: msm_sdhci: Use max-frequency to get clock rate   Sumit Garg
• [PATCH v3 00/10] Qualcomm IPQ5210 SoC bringup   Varadarajan Narayanan
  • [PATCH v3 01/10] dts: ipq5210-rdp504-u-boot: add override dtsi   Varadarajan Narayanan
  • [PATCH v3 02/10] clk/qcom: add initial clock driver for ipq5210   Varadarajan Narayanan
    • [PATCH v3 02/10] clk/qcom: add initial clock driver for ipq5210   Simon Glass
      • [PATCH v3 02/10] clk/qcom: add initial clock driver for ipq5210   Varadarajan Narayanan
  • [PATCH v3 03/10] pinctrl: qcom: Add ipq5210 pinctrl driver   Varadarajan Narayanan
    • [PATCH v3 03/10] pinctrl: qcom: Add ipq5210 pinctrl driver   Simon Glass
  • [PATCH v3 04/10] misc: qcom_geni: Add minicore support   Varadarajan Narayanan
    • [PATCH v3 04/10] misc: qcom_geni: Add minicore support   Simon Glass
  • [PATCH v3 05/10] spl: Include SMEM driver in SPL   Varadarajan Narayanan
  • [PATCH v3 06/10] mach-snapdragon: Add initial support for IPQ5210 SPL   Varadarajan Narayanan
    • [PATCH v3 06/10] mach-snapdragon: Add initial support for IPQ5210 SPL   Simon Glass
    • [PATCH v3 06/10] mach-snapdragon: Add initial support for IPQ5210 SPL   Balaji Selvanathan
  • [PATCH v3 07/10] mach-snapdragon: spl: Update SMEM with boot details   Varadarajan Narayanan
    • [PATCH v3 07/10] mach-snapdragon: spl: Update SMEM with boot details   Simon Glass
  • [PATCH v3 08/10] mach-snapdragon: Add commands to create wrapper ELF   Varadarajan Narayanan
    • [PATCH v3 08/10] mach-snapdragon: Add commands to create wrapper ELF   Simon Glass
  • [PATCH v3 09/10] configs: add qcom_ipq5210_mmc_defconfig   Varadarajan Narayanan
  • [PATCH v3 10/10] doc: board/qualcomm: Update RDP build instructions   Varadarajan Narayanan
    • [PATCH v3 10/10] doc: board/qualcomm: Update RDP build instructions   Simon Glass
• [PATCH v2] usb: dwc3: core: fix memory leaks in event buffer cleanup   Gurumoorthy Santhakumar
  • [PATCH v2] usb: dwc3: core: fix memory leaks in event buffer cleanup   Marek Vasut
  • [PATCH v2] usb: dwc3: core: fix memory leaks in event buffer cleanup   Mattijs Korpershoek
• [PATCH v2 0/6] Relocate U-Boot in the last bank   Ilias Apalodimas
  • [PATCH v2 2/6] fdtdec: Introduce fdtdec_setup_mem_ram_top() to determine end of topmost DRAM bank   Ilias Apalodimas
  • [PATCH v2 3/6] treewide: move bi_dram[] from bd to gd   Ilias Apalodimas
    • [PATCH v2 3/6] treewide: move bi_dram[] from bd to gd   Marek Vasut
      • [PATCH v2 3/6] treewide: move bi_dram[] from bd to gd   Ilias Apalodimas
  • [PATCH v2 4/6] common: move ram_base calculation to independent INITCALL()   Ilias Apalodimas
    • [PATCH v2 4/6] common: move ram_base calculation to independent INITCALL()   Marek Vasut
  • [PATCH v2 5/6] common: Clean up setup_dest_addr()   Ilias Apalodimas
    • [PATCH v2 5/6] common: Clean up setup_dest_addr()   Marek Vasut
  • [PATCH v2 6/6] common: Add an option to relocate on ram top   Ilias Apalodimas
    • [PATCH v2 6/6] common: Add an option to relocate on ram top   Ilias Apalodimas
    • [PATCH v2 6/6] common: Add an option to relocate on ram top   Ilias Apalodimas
    • [PATCH v2 6/6] common: Add an option to relocate on ram top   Marek Vasut
      • [PATCH v2 6/6] common: Add an option to relocate on ram top   Ilias Apalodimas
      • [PATCH v2 6/6] common: Add an option to relocate on ram top   Marek Vasut
      • [PATCH v2 6/6] common: Add an option to relocate on ram top   Ilias Apalodimas
  • [PATCH v2 0/6] Relocate U-Boot in the last bank   Ilias Apalodimas
• [PATCH v2 1/6] fdtdec: Deduplicate iterator function   Ilias Apalodimas
• [PATCH v7 0/5] Implement reset to EDL for qcs9100   Varadarajan Narayanan
  • [PATCH v7 1/5] arm: psci: Add API to check for support of specific PSCI function   Varadarajan Narayanan
  • [PATCH v7 2/5] drivers: sysreset: Add sysreset op that can take arguments   Varadarajan Narayanan
  • [PATCH v7 3/5] sysreset: Implement PSCI based reset to EDL mode for QCOM SoCs   Varadarajan Narayanan
  • [PATCH v7 4/5] cmd: boot: Add '-edl' option to reset command documentation   Varadarajan Narayanan
  • [PATCH v7 5/5] qcom_defconfig: enable psci based sysreset   Varadarajan Narayanan
• [PATCH v2 0/3] Fixes for parent rate lookup of mediatek clk driver   Weijie Gao
  • [PATCH v2 1/3] clk: mediatek: remove redundant forward declarations   Weijie Gao
  • [PATCH v2 2/3] clk: mediatek: add grandparent variable in mtk_find_parent_rate()   Weijie Gao
  • [PATCH v2 3/3] clk: mediatek: fix parent rate lookup for fixed PLL clocks   Weijie Gao
  • [PATCH v2 0/3] Fixes for parent rate lookup of mediatek clk driver   David Lechner
• [PATCH v1 0/3] add Toradex Verdin iMX95 support   Emanuele Ghidoli
  • [PATCH v1 1/3] common: memsize: add RAM size probe based on alias detection   Emanuele Ghidoli
    • [PATCH v1 1/3] common: memsize: add RAM size probe based on alias detection   Simon Glass
  • [PATCH v1 2/3] board: toradex: add Toradex Verdin iMX95   Emanuele Ghidoli
    • [PATCH v1 2/3] board: toradex: add Toradex Verdin iMX95   Simon Glass
  • [PATCH v1 3/3] toradex: tdx-cfg-block: add verdin imx95 0226, 0227 and 0228 pid4   Emanuele Ghidoli
    • [PATCH v1 3/3] toradex: tdx-cfg-block: add verdin imx95 0226, 0227 and 0228 pid4   Simon Glass
  • [PATCH v1 0/3] add Toradex Verdin iMX95 support   Francesco Dolcini
• [PATCH v3 0/2] scsi: Replace SYNC_CACHE with FUA for scsi write   Balaji Selvanathan
  • [PATCH v3 1/2] Revert "scsi: sync cache on write"   Balaji Selvanathan
    • [PATCH v3 1/2] Revert "scsi: sync cache on write"   Simon Glass
  • [PATCH v3 2/2] scsi: Enable FUA bit in WRITE10 commands   Balaji Selvanathan
    • [PATCH v3 2/2] scsi: Enable FUA bit in WRITE10 commands   Simon Glass
• [PATCH v5 0/8] Add virtio-mmio support to m68k virt machine   Daniel Palmer
  • [PATCH v5 2/8] rtc: goldfish: Use __raw_readl() and __raw_writel()   Daniel Palmer
  • [PATCH v5 3/8] timer: goldfish: Use __raw_readl()   Daniel Palmer
  • [PATCH v5 4/8] m68k: Fix writew(), writel(), readw(), readl() endianness for classic m68k   Daniel Palmer
  • [PATCH v5 5/8] virtio: mmio: Allow instantiation via platform data   Daniel Palmer
  • [PATCH v5 6/8] virtio: cmd: Depend on VIRTIO_BLK   Daniel Palmer
  • [PATCH v5 7/8] virtio: blk: Fix converting the vendor id to a string   Daniel Palmer
  • [PATCH v5 8/8] board: qemu: m68k: Create virtio mmio instances   Daniel Palmer
    • [PATCH v5 8/8] board: qemu: m68k: Create virtio mmio instances   Kuan-Wei Chiu
  • [PATCH v5 0/8] Add virtio-mmio support to m68k virt machine   Daniel Palmer
    • [PATCH v5 0/8] Add virtio-mmio support to m68k virt machine   Kuan-Wei Chiu
  • [PATCH v5 0/8] Add virtio-mmio support to m68k virt machine   Daniel Palmer
• [PATCH v5 1/8] sysreset: qemu virt: Use __raw_writel()   Daniel Palmer
• [PATCH] arm: dts: socfpga: n5x: Drop kernel node from binman   Chee, Tien Fong
• [PATCH 1/9] m68k: dts: mcf5441x: add mmc device for mcf5441x   Angelo Dureghello
  • [PATCH 2/9] m68k: dts: stmark2: enable esdhc   Angelo Dureghello
  • [PATCH 3/9] board: stmark2: add sd boot command   Angelo Dureghello
  • [PATCH 4/9] board: stmark2: remove old garbage   Angelo Dureghello
    • [PATCH 4/9] board: stmark2: remove old garbage   Kuan-Wei Chiu
      • [PATCH 4/9] board: stmark2: remove old garbage   Kuan-Wei Chiu
  • [PATCH 5/9] configs: stmark2: add support for mmc   Angelo Dureghello
    • [PATCH 5/9] configs: stmark2: add support for mmc   Kuan-Wei Chiu
  • [PATCH 6/9] configs: stmark2: add bdinfo command   Angelo Dureghello
  • [PATCH 7/9] mmc: Kconfig: allows m68k to use esdhc imx driver   Angelo Dureghello
  • [PATCH 8/9] m68k: mcf5441x: create stub to use imx drivers   Angelo Dureghello
  • [PATCH 9/9] m68k: set proper u-boot image size for initial boot   Angelo Dureghello
• [PATCH] arm: layerscape: Check zero size memory bank before lmb_add   Ye Li
  • [PATCH] arm: layerscape: Check zero size memory bank before lmb_add   Peng Fan
• [PATCH v2 0/2] This is version 2 of the RZ/G2L support.   Michele Bisogno
  • [PATCH v2 1/2] regulator: rzg2l: implement connectivity notification   Michele Bisogno
  • [PATCH v2 2/2] usb: gadget: renesas: add support for RZ/G2L SoC   Michele Bisogno
• [PATCH v4 0/4] Autoboot prompt customization and bootmenu cosmetics   Ferass El Hafidi
  • [PATCH v4 1/4] autoboot: allow custom prompt without requiring AUTOBOOT_KEYED   Ferass El Hafidi
  • [PATCH v4 2/4] cmd: bootmenu: ANSI_CLEAR_LINE before entry name   Ferass El Hafidi
  • [PATCH v4 3/4] doc: usage: convert autoboot README to rST   Ferass El Hafidi
    • [PATCH v4 3/4] doc: usage: convert autoboot README to rST   Heinrich Schuchardt
      • [PATCH v4 3/4] doc: usage: convert autoboot README to rST   Ferass El Hafidi
    • [PATCH v4 3/4] doc: usage: convert autoboot README to rST   Simon Glass
  • [PATCH v4 4/4] doc: usage: autoboot: update content   Ferass El Hafidi
    • [PATCH v4 4/4] doc: usage: autoboot: update content   Heinrich Schuchardt
      • [PATCH v4 4/4] doc: usage: autoboot: update content   Ferass El Hafidi
    • [PATCH v4 4/4] doc: usage: autoboot: update content   Simon Glass
• doc/board/starfive/jh7110_common.rst: Documentation doesn't mention OpenSBI text start address   Johannes Krottmayer
  • doc/board/starfive/jh7110_common.rst: Documentation doesn't mention OpenSBI text start address   Yao Zi
• [RESEND v4 00/14] sc5xx Environment Cleanup and Fixes   Caleb Ethridge
  • [RESEND v4 01/14] configs: sc5xx: Do not store environment in SPI flash   Caleb Ethridge
    • [RESEND v4 01/14] configs: sc5xx: Do not store environment in SPI flash   Simon Glass
  • [RESEND v4 02/14] mach-sc5xx: Remove update commands from default environment   Caleb Ethridge
    • [RESEND v4 02/14] mach-sc5xx: Remove update commands from default environment   Simon Glass
      • [RESEND v4 02/14] mach-sc5xx: Remove update commands from default environment   Caleb Ethridge
  • [RESEND v4 03/14] mach-sc5xx: Update boot commands   Caleb Ethridge
    • [RESEND v4 03/14] mach-sc5xx: Update boot commands   Simon Glass
  • [RESEND v4 04/14] mach-sc5xx: Switch from tftp to wget   Caleb Ethridge
    • [RESEND v4 04/14] mach-sc5xx: Switch from tftp to wget   Simon Glass
      • [RESEND v4 04/14] mach-sc5xx: Switch from tftp to wget   Philip Molloy
      • [RESEND v4 04/14] mach-sc5xx: Switch from tftp to wget   Simon Glass
  • [RESEND v4 05/14] mach-sc5xx: Add USB boot command   Caleb Ethridge
    • [RESEND v4 05/14] mach-sc5xx: Add USB boot command   Simon Glass
      • [RESEND v4 05/14] mach-sc5xx: Add USB boot command   Caleb Ethridge
  • [RESEND v4 06/14] mach-sc5xx: Remove preliminary binman support   Caleb Ethridge
    • [RESEND v4 06/14] mach-sc5xx: Remove preliminary binman support   Simon Glass
  • [RESEND v4 07/14] dts: sc594: Fix gige-reset line on EZKIT   Caleb Ethridge
    • [RESEND v4 07/14] dts: sc594: Fix gige-reset line on EZKIT   Simon Glass
  • [RESEND v4 08/14] mach-sc5xx: sc573: Rename EZKIT board to EZLITE   Caleb Ethridge
    • [RESEND v4 08/14] mach-sc5xx: sc573: Rename EZKIT board to EZLITE   Simon Glass
  • [RESEND v4 09/14] mach-sc5xx: Update image load address   Caleb Ethridge
    • [RESEND v4 09/14] mach-sc5xx: Update image load address   Simon Glass
      • [RESEND v4 09/14] mach-sc5xx: Update image load address   Caleb Ethridge
      • [RESEND v4 09/14] mach-sc5xx: Update image load address   Simon Glass
      • [RESEND v4 09/14] mach-sc5xx: Update image load address   Caleb Ethridge
  • [RESEND v4 10/14] mach-sc5xx: Update SPI bootargs for ubifs   Caleb Ethridge
    • [RESEND v4 10/14] mach-sc5xx: Update SPI bootargs for ubifs   Simon Glass
  • [RESEND v4 11/14] configs: sc5xx: Set default bootcmd to SPI boot   Caleb Ethridge
    • [RESEND v4 11/14] configs: sc5xx: Set default bootcmd to SPI boot   Simon Glass
  • [RESEND v4 12/14] arm: sc5xx: Remove SC5XX_LOADADDR   Caleb Ethridge
    • [RESEND v4 12/14] arm: sc5xx: Remove SC5XX_LOADADDR   Simon Glass
  • [RESEND v4 13/14] arm: sc5xx: add missing boot env selectors   Caleb Ethridge
    • [RESEND v4 13/14] arm: sc5xx: add missing boot env selectors   Simon Glass
  • [RESEND v4 14/14] arm: sc5xx: Add fdt_addr_r, kernel_addr_r, and initrd_addr   Caleb Ethridge
    • [RESEND v4 14/14] arm: sc5xx: Add fdt_addr_r, kernel_addr_r, and initrd_addr   Simon Glass
      • [RESEND v4 14/14] arm: sc5xx: Add fdt_addr_r, kernel_addr_r, and initrd_addr   Caleb Ethridge
  • [RESEND v4 00/14] sc5xx Environment Cleanup and Fixes   Greg Malysa
• [PATCH] pci: correct PCI device enumeration to include all functions on device 0   Maximilian Brune
  • [PATCH] pci: correct PCI device enumeration to include all functions on device 0   Simon Glass
    • [PATCH] pci: correct PCI device enumeration to include all functions on device 0   Maximilian Brune
  • [PATCH v2] pci: correct PCI device enumeration to include all functions on device 0   Maximilian Brune
    • [PATCH v2] pci: correct PCI device enumeration to include all functions on device 0   Simon Glass
  • [PATCH v3] pci: correct PCI device enumeration to include all functions on device 0   Maximilian Brune
    • [PATCH v3] pci: correct PCI device enumeration to include all functions on device 0   Tom Rini
• [PATCH v2] fpga: xilinx: Add option to skip bitstream ID check   Michal Simek
• [PATCH v3 1/2] regulator: rzg2l: implement connectivity notification   Marek Vasut
• [PATCH v3 2/2] usb: gadget: renesas: add support for RZ/G2L SoC   Marek Vasut
• [PATCH v3 0/2] Changes since v2: Added missing Signed-off-by tags.   Marek Vasut
  • [PATCH v3 0/2] Changes since v2: Added missing Signed-off-by tags.   Michele Bisogno
    • [PATCH v3 1/2] regulator: rzg2l: implement connectivity notification   Michele Bisogno
    • [PATCH v3 2/2] usb: gadget: renesas: add support for RZ/G2L SoC   Michele Bisogno
• [U-Boot] [PATCH 1/2] avb: Fix build when CONFIG_OPTEE_TA_AVB is disabled   Yusuf Brey
• [PATCH] binman: x509_cert: add PKCS#11/HSM signing support   Simon Glass
  • [PATCH] binman: x509_cert: add PKCS#11/HSM signing support   Sergio Prado
  • [PATCH] binman: x509_cert: add PKCS#11/HSM signing support   Sergio Prado
• [PATCH 0/8] spi: atcspi200: Modernize driver and add spi-mem + data merge support   Leo Yu-Chi Liang
  • [PATCH 1/8] spi: atcspi200: Clean up register access, macros, naming, DT parsing, and style   Leo Yu-Chi Liang
  • [PATCH 2/8] spi: atcspi200: Improve clock configuration and divider logic   Leo Yu-Chi Liang
  • [PATCH 3/8] spi: atcspi200: Use proper timeout handling for busy-wait loops   Leo Yu-Chi Liang
  • [PATCH 4/8] spi: atcspi200: Fix double stop call and simplify transfer loop   Leo Yu-Chi Liang
• [PATCH 0/3] Add support for ubi environment to auto create volumes   Weijie Gao
  • [PATCH 1/3] cmd: ubi: expose more APIs to public   Weijie Gao
    • [PATCH 1/3] cmd: ubi: expose more APIs to public   Simon Glass
      • [PATCH 1/3] cmd: ubi: expose more APIs to public   Weijie Gao
      • [PATCH 1/3] cmd: ubi: expose more APIs to public   Simon Glass
  • [PATCH 2/3] cmd: ubi: allow creating volume with all free spaces in ubi_create_vol   Weijie Gao
    • [PATCH 2/3] cmd: ubi: allow creating volume with all free spaces in ubi_create_vol   Simon Glass
      • [PATCH 2/3] cmd: ubi: allow creating volume with all free spaces in ubi_create_vol   Weijie Gao
      • [PATCH 2/3] cmd: ubi: allow creating volume with all free spaces in ubi_create_vol   Simon Glass
  • [PATCH 3/3] env: ubi: add support to create environment volume if it does not exist   Weijie Gao
    • [PATCH 3/3] env: ubi: add support to create environment volume if it does not exist   Simon Glass
      • [PATCH 3/3] env: ubi: add support to create environment volume if it does not exist   Weijie Gao
• [PATCH 5/8] spi: atcspi200: Add spi-mem framework support   Leo Yu-Chi Liang
  • [PATCH 6/8] spi: atcspi200: Add data merge mode support   Leo Yu-Chi Liang
  • [PATCH 7/8] mtd: spi-nor: Add Macronix MX25U quad-mode fixups   Leo Yu-Chi Liang
    • [PATCH 7/8] mtd: spi-nor: Add Macronix MX25U quad-mode fixups   Takahiro.Kuwano at infineon.com
  • [PATCH 8/8] configs: ae350: Enable ATCSPI200 data merge mode   Leo Yu-Chi Liang
• [PATCH] arm: socfpga: Add fitImage for SPL programs periph RBF only   Chee, Tien Fong
• [PATCH 1/1] doc: emulation: qemu-arm: add secure state steps   Heinrich Schuchardt
  • [PATCH 1/1] doc: emulation: qemu-arm: add secure state steps   Simon Glass
    • [PATCH 1/1] doc: emulation: qemu-arm: add secure state steps   Johannes Krottmayer
    • [PATCH v2] doc: emulation: qemu-arm: add secure state steps   Johannes Krottmayer
      • [PATCH v2] doc: emulation: qemu-arm: add secure state steps   Heinrich Schuchardt
      • [PATCH v2] doc: emulation: qemu-arm: add secure state steps   Johannes Krottmayer
• [PATCH 0/2] Auto-generate binman entry and bintool documentation   Heinrich Schuchardt
  • [PATCH 0/2] Auto-generate binman entry and bintool documentation   Simon Glass
• [PATCH v2 0/3] add Toradex Verdin iMX95 support   Emanuele Ghidoli
  • [PATCH v2 1/3] common: memsize: add RAM size probe based on alias detection   Emanuele Ghidoli
    • [PATCH v2 1/3] common: memsize: add RAM size probe based on alias detection   Emanuele Ghidoli
  • [PATCH v2 2/3] board: toradex: add Toradex Verdin iMX95   Emanuele Ghidoli
    • [PATCH v2 2/3] board: toradex: add Toradex Verdin iMX95   Emanuele Ghidoli
  • [PATCH v2 3/3] toradex: tdx-cfg-block: add verdin imx95 0226, 0227 and 0228 pid4   Emanuele Ghidoli
    • [PATCH v2 3/3] toradex: tdx-cfg-block: add verdin imx95 0226, 0227 and 0228 pid4   Emanuele Ghidoli
  • [PATCH v2 0/3] add Toradex Verdin iMX95 support   Francesco Dolcini
• [PATCH v1] configs: socfpga: Add QSPI support for Cyclone 5   Chee, Tien Fong
• Pull request for efi-2026-07-rc1   Heinrich Schuchardt
  • Pull request for efi-2026-07-rc1   Tom Rini
• [PATCH v2] misc: Add RZG2L OTP support   Mathieu Othacehe
• [PATCH] nand: Add a watch command   Michael Nazzareno Trimarchi
  • [PATCH] nand: Add a watch command   Miquel Raynal
• [PATCH] arm: socfpga: Setting the image magic value to romcode initswstate register   Chee, Tien Fong
• [PATCH] arm: socfpga: Reset MPFE NoC after programming peripheral / combined RBF   Chee, Tien Fong
• [PATCH v1 0/1] qcom: Rename QCS9100 defconfig to Lemans defconfig   Aswin Murugan
  • [PATCH v1 1/1] configs: Rename qcs9100 defconfig to lemans defconfig   Aswin Murugan
    • [PATCH v1 1/1] configs: Rename qcs9100 defconfig to lemans defconfig   Heinrich Schuchardt
      • [PATCH v1 1/1] configs: Rename qcs9100 defconfig to lemans defconfig   Aswin Murugan
• [PATCH v2] virtio: add support for SIZE_MAX & SEG_MAX features   Christian Pötzsch
  • [PATCH v2] virtio: add support for SIZE_MAX & SEG_MAX features   Tom Rini
• [PATCH v3 0/7] Add FIT multi-DTB selection for Qualcomm platforms   Aswin Murugan
  • [PATCH v3 1/7] mach-snapdragon: Add generic SMEM cache infrastructure   Aswin Murugan
    • [PATCH v3 1/7] mach-snapdragon: Add generic SMEM cache infrastructure   Simon Glass
  • [PATCH v3 2/7] mach-snapdragon: Add FIT multi-DTB selection support   Aswin Murugan
    • [PATCH v3 2/7] mach-snapdragon: Add FIT multi-DTB selection support   Simon Glass
  • [PATCH v3 3/7] configs: snapdragon: Enable FIT multi-DTB and configure IMEM   Aswin Murugan
    • [PATCH v3 3/7] configs: snapdragon: Enable FIT multi-DTB and configure IMEM   Simon Glass
  • [PATCH v3 4/7] image: add IH_TYPE_FATFS image type   Aswin Murugan
    • [PATCH v3 4/7] image: add IH_TYPE_FATFS image type   Simon Glass
  • [PATCH v3 5/7] mkimage: add fatfs image type for FAT partition images   Aswin Murugan
    • [PATCH v3 5/7] mkimage: add fatfs image type for FAT partition images   Simon Glass
  • [PATCH v3 6/7] doc: document mkimage fatfs type and Qualcomm multi-DTB   Aswin Murugan
    • [PATCH v3 6/7] doc: document mkimage fatfs type and Qualcomm multi-DTB   Simon Glass
  • [PATCH v3 7/7] mach-snapdragon: Reorder header includes   Aswin Murugan
    • [PATCH v3 7/7] mach-snapdragon: Reorder header includes   Simon Glass
  • [PATCH v3 0/7] Add FIT multi-DTB selection for Qualcomm platforms   Jan Kiszka
  • [PATCH v3 0/7] Add FIT multi-DTB selection for Qualcomm platforms   Tom Rini
    • [PATCH v3 0/7] Add FIT multi-DTB selection for Qualcomm platforms   Quentin Schulz
• [PATCH v7 0/7] riscv: Add support for P8700 platform on Boston board   Uros Stajic
  • [PATCH v7 1/7] riscv: Add initial support for P8700 SoC   Uros Stajic
  • [PATCH v7 2/7] board: boston-riscv: Add initial support for P8700 Boston board   Uros Stajic
  • [PATCH v7 3/7] gpio: Add GPIO driver for Intel EG20T   Uros Stajic
  • [PATCH v7 4/7] pci: xilinx: Avoid writing memory base/limit for root bridge   Uros Stajic
  • [PATCH v7 5/7] riscv: Add syscon driver for MIPS GIC block   Uros Stajic
  • [PATCH v7 6/7] net: pch_gbe: Add PHY reset and MAC address fallback for RISC-V   Uros Stajic
  • [PATCH v7 7/7] riscv: p8700: Add Coherence Manager (CM) and IOCU support   Uros Stajic
• [PATCH v6 1/7] riscv: Add initial support for P8700 SoC   Uros Stajic
• [PATCH v4 00/14] add software ecdsa support   Philippe Reynes
  • [PATCH v4 01/14] mbedtls: enable support of ecc   Philippe Reynes
    • [PATCH v4 01/14] mbedtls: enable support of ecc   Simon Glass
    • [PATCH v4 01/14] mbedtls: enable support of ecc   Raymond Mao
  • [PATCH v4 02/14] ecdsa: initial support of ecdsa using mbedtls   Philippe Reynes
    • [PATCH v4 02/14] ecdsa: initial support of ecdsa using mbedtls   Simon Glass
    • [PATCH v4 02/14] ecdsa: initial support of ecdsa using mbedtls   Raymond Mao
  • [PATCH v4 03/14] test: lib: ecdsa: add initial test   Philippe Reynes
    • [PATCH v4 03/14] test: lib: ecdsa: add initial test   Simon Glass
    • [PATCH v4 03/14] test: lib: ecdsa: add initial test   Raymond Mao
  • [PATCH v4 05/14] ecdsa: fix support of secp521r1   Philippe Reynes
    • [PATCH v4 05/14] ecdsa: fix support of secp521r1   Simon Glass
    • [PATCH v4 05/14] ecdsa: fix support of secp521r1   Raymond Mao
  • [PATCH v4 06/14] test: dm: ecdsa.c: clean this test as software ecdsa is now implemented   Philippe Reynes
    • [PATCH v4 06/14] test: dm: ecdsa.c: clean this test as software ecdsa is now implemented   Simon Glass
  • [PATCH v4 07/14] test: py: vboot: prepare integration test for ecdsa   Philippe Reynes
  • [PATCH v4 10/14] tools: binman: pre-load: add support of ecdsa   Philippe Reynes
    • [PATCH v4 10/14] tools: binman: pre-load: add support of ecdsa   Simon Glass
  • [PATCH v4 12/14] tools: preload_check_sign: add support of ecdsa   Philippe Reynes
    • [PATCH v4 12/14] tools: preload_check_sign: add support of ecdsa   Simon Glass
  • [PATCH v4 13/14] test: py: vboot: prepare test for global signature with ecdsa   Philippe Reynes
    • [PATCH v4 13/14] test: py: vboot: prepare test for global signature with ecdsa   Simon Glass
  • [v4,00/14] add software ecdsa support   Simon Glass
  • [PATCH v4 00/14] add software ecdsa support   Raymond Mao
• [PATCH v4 04/14] drivers: crypto: add software ecdsa support   Philippe Reynes
  • [PATCH v4 04/14] drivers: crypto: add software ecdsa support   Simon Glass
  • [PATCH v4 04/14] drivers: crypto: add software ecdsa support   Raymond Mao
• [PATCH v4 08/14] test: vboot: add test for ecdsa   Philippe Reynes
• [PATCH v4 09/14] tools: mkimage: pre-load: add support of ecdsa   Philippe Reynes
  • [PATCH v4 09/14] tools: mkimage: pre-load: add support of ecdsa   Simon Glass
• [PATCH v4 11/14] boot: pre-load: add support of ecdsa   Philippe Reynes
  • [PATCH v4 11/14] boot: pre-load: add support of ecdsa   Simon Glass
• [PATCH v4 14/14] test: py: vboot: add test for global signature with ecdsa   Philippe Reynes
• [PATCH 0/2] k3-am69-aquila: Migrate to OF_UPSTREAM and add remoteproc FW pre-loading   Ernest Van Hoecke
  • [PATCH 1/2] arm: dts: k3-am69-aquila: migrate to OF_UPSTREAM   Ernest Van Hoecke
  • [PATCH 2/2] board: toradex: aquila-am69: add remoteproc firmware pre-loading   Ernest Van Hoecke
  • [PATCH 0/2] k3-am69-aquila: Migrate to OF_UPSTREAM and add remoteproc FW pre-loading   Francesco Dolcini
  • [PATCH 0/2] k3-am69-aquila: Migrate to OF_UPSTREAM and add remoteproc FW pre-loading   Tom Rini
• [PATCH 1/4] arm: dts: fsl-ls1088a-qds: Fix missed -u-boot.dtsi   Ye Li
  • [PATCH 2/4] arm: dts: fsl-ls1088a: Set dpmac nodes default to disabled   Ye Li
    • [PATCH 2/4] arm: dts: fsl-ls1088a: Set dpmac nodes default to disabled   Peng Fan
  • [PATCH 1/4] arm: dts: fsl-ls1088a-qds: Fix missed -u-boot.dtsi   Peng Fan
• [PATCH 3/4] arm: dts: fsl-ls1088a: Enable SD device   Ye Li
  • [PATCH 4/4] arm: dts: fsl-ls1088a: Enable USB nodes   Ye Li
    • [PATCH 4/4] arm: dts: fsl-ls1088a: Enable USB nodes   Peng Fan
  • [PATCH 3/4] arm: dts: fsl-ls1088a: Enable SD device   Peng Fan
• [PATCH 1/2] arm: dts: layerscape: Fix DT build warning in SPI nodes   Ye Li
  • [PATCH 1/2] arm: dts: layerscape: Fix DT build warning in SPI nodes   Peng Fan
• [PATCH 2/2] arm: dts: layerscape: Fix SPI flash compatible string issue   Ye Li
  • [PATCH 2/2] arm: dts: layerscape: Fix SPI flash compatible string issue   Peng Fan
• [PATCH v3] mtd: spi-nor: ids: Add support for Puyasemi flash chips   Tom Rini
• [PATCH] mtd: spi: spi-nor-ids: Add support for XMC XM25QH01D   Tom Rini
• [PATCH] mtd: spi-nor: Add Dosilicon DS25M/Q series support   Tom Rini
• [PATCH] mtd: spi-nor: ids: add ISSI IS25LP*J/*MJ/*E and IS25WP*J/*MJ device IDs   Tom Rini
• [PATCH v2] mtd: spi-nor: Add gd25lx128j chip   Tom Rini
• [PATCH] spi: Correct dependencies for SPI_FLASH_SST   Tom Rini
• [PULL] u-boot-usb/master   Marek Vasut
  • [PULL] u-boot-usb/master   Tom Rini
  • [PULL] u-boot-usb/master   Marek Vasut
    • [PULL] u-boot-usb/master   Tom Rini
• [PATCH 1/1] Mailmap entry for Javier Tia   Heinrich Schuchardt
  • [PATCH 1/1] Mailmap entry for Javier Tia   Javier Tia
  • [PATCH 1/1] Mailmap entry for Javier Tia   Tom Rini
• [PATCH v3 0/6] Add support for DT overlays handoff   Raymond Mao
  • [PATCH v3 0/6] Add support for DT overlays handoff   Michal Simek
    • [PATCH v3 0/6] Add support for DT overlays handoff   Raymond Mao
      • [PATCH v3 0/6] Add support for DT overlays handoff   Tom Rini
      • [PATCH v3 0/6] Add support for DT overlays handoff   Michal Simek
  • [PATCH v3 0/6] Add support for DT overlays handoff   Tom Rini
• [PATCH 0/6] arm: mediatek: add UFS support for Genio 520/720 EVKs   David Lechner
• [GIT PULL] Please pull mediatek-for-master-2026-04-17 into master   David Lechner
  • [GIT PULL] Please pull mediatek-for-master-2026-04-17 into master   Tom Rini
• [PATCH] Makefile: fix host CPP pollution in cmd_gen_envp   Levi Shafter
  • [PATCH] Makefile: fix host CPP pollution in cmd_gen_envp   Simon Glass
  • [PATCH] Makefile: fix host CPP pollution in cmd_gen_envp   Tom Rini
• [PATCH 1/1] tools/asn1_compiler: avoid -Wdiscarded-qualifiers   Heinrich Schuchardt
  • [PATCH 1/1] tools/asn1_compiler: avoid -Wdiscarded-qualifiers   Simon Glass
  • [PATCH 1/1] tools/asn1_compiler: avoid -Wdiscarded-qualifiers   Tom Rini
• [PATCH v4 0/5] Enable USB3 Super-Speed support for QCM6490/SC7280   Balaji Selvanathan
  • [PATCH v4 1/5] drivers: clk: qcom: sc7280: Add USB3 PHY pipe clock   Balaji Selvanathan
  • [PATCH v4 2/5] drivers: phy: qcom: Add QMP USB3-DP Combo PHY driver   Balaji Selvanathan
  • [PATCH v4 3/5] arm: mach-snapdragon: Skip USB fixup for qcom,sc7280-dwc3   Balaji Selvanathan
  • [PATCH v4 4/5] configs: qcm6490: Enable super-speed USB support   Balaji Selvanathan
  • [PATCH v4 5/5] MAINTAINERS: Add entry for Qualcomm PHY drivers   Balaji Selvanathan
  • [PATCH v4 0/5] Enable USB3 Super-Speed support for QCM6490/SC7280   Balaji Selvanathan
• [PATCH 0/4] power: regulator: various fix for pfuze100   Peng Fan (OSS)
  • [PATCH 1/4] power: regulator: pfuze100: Fix min_uV usage   Peng Fan (OSS)
  • [PATCH 2/4] power: regulator: pfuze100: support high output voltage mode   Peng Fan (OSS)
  • [PATCH 3/4] power: regulator: pfuze100: support non-independent mode   Peng Fan (OSS)
  • [PATCH 4/4] power: regulator: Correct Kconfig for PFUZE100   Peng Fan (OSS)
• How to build U-Boot with a custom out-of-tree device tree   Johannes Krottmayer
  • How to build U-Boot with a custom out-of-tree device tree   E Shattow
  • How to build U-Boot with a custom out-of-tree device tree   Simon Glass
    • How to build U-Boot with a custom out-of-tree device tree   Johannes Krottmayer
      • How to build U-Boot with a custom out-of-tree device tree   Simon Glass
• [PATCH 0/2] efi_loader: centralize messaging for efi_init_obj_list   Heinrich Schuchardt
  • [PATCH 1/2] cmd/bootefi: move efi_init_obj_list() to the start of do_bootefi   Heinrich Schuchardt
  • [PATCH 2/2] efi_loader: centralize messaging for efi_init_obj_list   Heinrich Schuchardt
    • [PATCH 2/2] efi_loader: centralize messaging for efi_init_obj_list   Simon Glass
  • [PATCH 0/2] efi_loader: centralize messaging for efi_init_obj_list   Ilias Apalodimas
• [PATCH 1/1] scripts/dtc: avoid discarded qualifiers in overlay_fixup_phandle   Heinrich Schuchardt
  • [PATCH 1/1] scripts/dtc: avoid discarded qualifiers in overlay_fixup_phandle   Tom Rini
    • [PATCH 1/1] scripts/dtc: avoid discarded qualifiers in overlay_fixup_phandle   Heinrich Schuchardt
      • [PATCH 1/1] scripts/dtc: avoid discarded qualifiers in overlay_fixup_phandle   Tom Rini
      • [PATCH 1/1] scripts/dtc: avoid discarded qualifiers in overlay_fixup_phandle   Heinrich Schuchardt
      • [PATCH 1/1] scripts/dtc: avoid discarded qualifiers in overlay_fixup_phandle   Tom Rini
  • [PATCH 1/1] scripts/dtc: avoid discarded qualifiers in overlay_fixup_phandle   Tom Rini
• About LUKS in U-Boot   mitochondriummulticast
• [PULL] Please pull casey/qcom-main-13Apr2026   Casey Connolly
  • [PULL] Please pull casey/qcom-main-13Apr2026   Tom Rini
    • [PULL] Please pull casey/qcom-main-13Apr2026   Sumit Garg
      • [PULL] Please pull casey/qcom-main-13Apr2026   Casey Connolly
      • [PULL] Please pull casey/qcom-main-13Apr2026   Sumit Garg
  • [PULL] Please pull casey/qcom-main-13Apr2026   Casey Connolly
    • [PULL] Please pull casey/qcom-main-13Apr2026   Tom Rini
• [PATCH] fs/erofs: Fix build for m68k   Daniel Palmer
  • [PATCH] fs/erofs: Fix build for m68k   Kuan-Wei Chiu
    • [PATCH] fs/erofs: Fix build for m68k   Daniel Palmer
• [PATCH v3 0/5] Add partition type GUID support for environment   Balaji Selvanathan
  • [PATCH v3 1/5] disk: Add partition lookup by type GUID functionality   Balaji Selvanathan
    • [PATCH v3 1/5] disk: Add partition lookup by type GUID functionality   Simon Glass
  • [PATCH v3 2/5] scsi: Add partition lookup by type GUID for SCSI devices   Balaji Selvanathan
    • [PATCH v3 2/5] scsi: Add partition lookup by type GUID for SCSI devices   David Lechner
  • [PATCH v3 3/5] env: scsi: Add support for partition type GUID based environment   Balaji Selvanathan
    • [PATCH v3 3/5] env: scsi: Add support for partition type GUID based environment   Simon Glass
    • [PATCH v3 3/5] env: scsi: Add support for partition type GUID based environment   David Lechner
  • [PATCH v3 4/5] configs: Enable partition type GUID for QCM6490 and QCS615 boards   Balaji Selvanathan
    • [PATCH v3 4/5] configs: Enable partition type GUID for QCM6490 and QCS615 boards   Simon Glass
  • [PATCH v3 5/5] test: dm: Add partition type GUID lookup test   Balaji Selvanathan
    • [PATCH v3 5/5] test: dm: Add partition type GUID lookup test   Simon Glass
  • [PATCH v3 0/5] Add partition type GUID support for environment   Sumit Garg
    • [PATCH v3 0/5] Add partition type GUID support for environment   Balaji Selvanathan
• [Report] ns16550: possible missing workaround for NXP erratum A-008006 on T1040/T1042 (DUART in FIFO mode)   its recursion
• [PATCH v4 0/8] Support metadata-driven A/B boot for STM32MP25   Dario Binacchi
  • [PATCH v4 1/8] lib: uuid: add partition type GUID for extended bootloader   Dario Binacchi
  • [PATCH v4 2/8] test: dm: part: add test for part_get_info_by_uuid   Dario Binacchi
  • [PATCH v4 3/8] test: cmd: add unit tests for part command   Dario Binacchi
    • [PATCH v4 3/8] test: cmd: add unit tests for part command   Simon Glass
  • [PATCH v4 4/8] cmd: part: support lookup by UUID   Dario Binacchi
  • [PATCH v4 5/8] test: cmd: part: add UUID lookup tests   Dario Binacchi
  • [PATCH v4 6/8] fwu: add helper to get image GUID by type and bank index   Dario Binacchi
  • [PATCH v4 7/8] test: dm: fwu_mdata: add test for fwu_mdata_get_image_guid   Dario Binacchi
    • [PATCH v4 7/8] test: dm: fwu_mdata: add test for fwu_mdata_get_image_guid   Simon Glass
  • [PATCH v4 8/8] board: st: stm32mp25: support dynamic A/B bank bootup   Dario Binacchi
• [PATCH v2 0/2] video: bridge: add ITE IT66121 DPI-to-HDMI bridge and enable on BeaglePlay   Shaurya Rane
  • [PATCH v2 1/2] video: bridge: add ITE IT66121 DPI-to-HDMI bridge driver   Shaurya Rane
    • [PATCH v2 1/2] video: bridge: add ITE IT66121 DPI-to-HDMI bridge driver   Simon Glass
  • [PATCH v2 2/2] BeaglePlay: enable IT66121 HDMI bridge and video stack   Shaurya Rane
    • [PATCH v2 2/2] BeaglePlay: enable IT66121 HDMI bridge and video stack   Simon Glass
• [PATCH v1] mach-snapdragon: Add KVM hypervisor support   Aswin Murugan
  • [PATCH v1] mach-snapdragon: Add KVM hypervisor support   Simon Glass
  • [PATCH v1] mach-snapdragon: Add KVM hypervisor support   neil.armstrong at linaro.org
  • [PATCH v1] mach-snapdragon: Add KVM hypervisor support   Sumit Garg
    • [PATCH v1] mach-snapdragon: Add KVM hypervisor support   Pavan Kondeti
• [PATCH] arm: dts: renesas: Clean up RPC DT nodes   Marek Vasut
• [PATCH] arm: dts: renesas: Remove duplicate AVB pinmux assignment on V3M   Marek Vasut
• [PATCH] arm: renesas: Fix Kconfig indent   Marek Vasut
• [PATCH] common: update: Fix TFTP return value handling   Marek Vasut
  • [PATCH] common: update: Fix TFTP return value handling   Tom Rini
• [PATCH] kbuild: Respect CONFIG_SYS_DTC_PAD_BYTES after fdtgrep   Marek Vasut
  • [PATCH] kbuild: Respect CONFIG_SYS_DTC_PAD_BYTES after fdtgrep   Simon Glass
    • [PATCH] kbuild: Respect CONFIG_SYS_DTC_PAD_BYTES after fdtgrep   Marek Vasut
      • [PATCH] kbuild: Respect CONFIG_SYS_DTC_PAD_BYTES after fdtgrep   Simon Glass
      • [PATCH] kbuild: Respect CONFIG_SYS_DTC_PAD_BYTES after fdtgrep   Marek Vasut
      • [PATCH] kbuild: Respect CONFIG_SYS_DTC_PAD_BYTES after fdtgrep   Simon Glass
      • [PATCH] kbuild: Respect CONFIG_SYS_DTC_PAD_BYTES after fdtgrep   Marek Vasut
• [PATCH] arm64: dts: renesas: r8a779md: Add support for R-Car M3Le R8A779MD Geist   Marek Vasut
• [PATCH v2] Improve handosff prepare on SoCFPGA   Brian Sune
• [PATCH] efi_loader: expand disk device names with drive details   Padmarao Begari
  • [PATCH] efi_loader: expand disk device names with drive details   Simon Glass
• [PATCH v3] Improve handosff prepare on SoCFPGA   Brian Sune
  • [PATCH v3] Improve handosff prepare on SoCFPGA   Simon Glass
    • [PATCH v3] Improve handosff prepare on SoCFPGA   Sune Brian
    • [PATCH v3] Improve handosff prepare on SoCFPGA   Sune Brian
      • [PATCH v3] Improve handosff prepare on SoCFPGA   Simon Glass
      • [PATCH v3] Improve handosff prepare on SoCFPGA   Sune Brian
• [PATCH] net: zynq_gem: Clear stale speed bits in NWCFG before setting new ones   Rafał Hibner
• [PATCH 1/1] test: fit: Use shared make_fname from fit_util   Aristo Chen
  • [PATCH 1/1] test: fit: Use shared make_fname from fit_util   Simon Glass
• [PATCH v2] tools: mkeficapsule: Add disable pkcs11 menu option   Wojciech Dubowik
  • [PATCH v2] tools: mkeficapsule: Add disable pkcs11 menu option   Quentin Schulz
    • [PATCH v2] tools: mkeficapsule: Add disable pkcs11 menu option   Wojciech Dubowik
      • [PATCH v2] tools: mkeficapsule: Add disable pkcs11 menu option   Quentin Schulz
  • [PATCH v2] tools: mkeficapsule: Add disable pkcs11 menu option   David Lechner
    • [PATCH v2] tools: mkeficapsule: Add disable pkcs11 menu option   David Lechner
      • [PATCH v2] tools: mkeficapsule: Add disable pkcs11 menu option   Wojciech Dubowik
• [PATCH 0/6] net: migrate NO_NET out of the networking stack choice   Quentin Schulz
  • [PATCH 1/6] move networking menu in net/Kconfig   Quentin Schulz
    • [PATCH 1/6] move networking menu in net/Kconfig   Simon Glass
    • [PATCH 1/6] move networking menu in net/Kconfig   Ilias Apalodimas
  • [PATCH 2/6] rename NET to NET_LEGACY   Quentin Schulz
    • [PATCH 2/6] rename NET to NET_LEGACY   Simon Glass
      • [PATCH 2/6] rename NET to NET_LEGACY   Quentin Schulz
      • [PATCH 2/6] rename NET to NET_LEGACY   Simon Glass
    • [PATCH 2/6] rename NET to NET_LEGACY   Ilias Apalodimas
  • [PATCH 3/6] net: make NET a menuconfig (and downgrade NO_NET to a simple config)   Quentin Schulz
    • [PATCH 3/6] net: make NET a menuconfig (and downgrade NO_NET to a simple config)   Simon Glass
    • Re: [PATCH 3/6] net: make NET a menuconfig (and downgrade NO_NET to a simple config)   Heinrich Schuchardt
      • [PATCH 3/6] net: make NET a menuconfig (and downgrade NO_NET to a simple config)   Quentin Schulz
      • Re: [PATCH 3/6] net: make NET a menuconfig (and downgrade NO_NET to a simple config)   Heinrich Schuchardt
  • [PATCH 4/6] simplify NET_LEGACY || NET_LWIP condition with NET condition   Quentin Schulz
    • [PATCH 4/6] simplify NET_LEGACY || NET_LWIP condition with NET condition   Simon Glass
  • [PATCH 5/6] doc: remove mention to non-existing TPL_NET   Quentin Schulz
    • [PATCH 5/6] doc: remove mention to non-existing TPL_NET   Simon Glass
  • [PATCH 6/6] boot: remove NO_NET use   Quentin Schulz
    • [PATCH 6/6] boot: remove NO_NET use   Simon Glass
    • [PATCH 6/6] boot: remove NO_NET use   Ilias Apalodimas
  • [0/6] net: migrate NO_NET out of the networking stack choice   Simon Glass
    • [0/6] net: migrate NO_NET out of the networking stack choice   Quentin Schulz
      • [0/6] net: migrate NO_NET out of the networking stack choice   Simon Glass
  • [PATCH 0/6] net: migrate NO_NET out of the networking stack choice   Tom Rini
  • [PATCH 0/6] net: migrate NO_NET out of the networking stack choice   Peter Robinson
  • [PATCH 0/6] net: migrate NO_NET out of the networking stack choice   Tom Rini
• [PATCH] mtd: spi-nor-ids: Add mt35xl256 and mtd35xu256 chips   Flaviu Nistor
• cmd: fatload: command doesn't update $filesize after next calls   Johannes Krottmayer
  • cmd: fatload: command doesn't update $filesize after next calls   Johannes Krottmayer
    • cmd: fatload: command doesn't update $filesize after next calls   Johannes Krottmayer
• [PATCH v1 1/3] configs: r8a78000_ironhide: Drop duplicate CONFIG_SCMI_FIRMWARE   Marek Vasut
  • [PATCH v1 1/3] configs: r8a78000_ironhide: Drop duplicate CONFIG_SCMI_FIRMWARE   Aristo Chen
    • [PATCH v1 2/3] configs: phycore_am62ax_r5_ethboot: Drop duplicate CONFIG_SPL_MMC   Aristo Chen
    • [PATCH v1 3/3] configs: phycore_am62x_r5_ethboot: Drop duplicate CONFIG entries   Aristo Chen
    • [PATCH v2 1/3] configs: r8a78000_ironhide: Drop duplicate CONFIG_SCMI_FIRMWARE   Aristo Chen
      • [PATCH v2 2/3] configs: phycore_am62ax_r5_ethboot: Drop duplicate CONFIG_SPL_MMC   Aristo Chen
      • [PATCH v2 3/3] configs: phycore_am62x_r5_ethboot: Drop duplicate CONFIG entries   Aristo Chen
• [PATCH v1] serial: msm-geni: configure RX watermark register   Gurumoorthy Santhakumar
  • [PATCH v1] serial: msm-geni: configure RX watermark register   Gurumoorthy Santhakumar
    • [PATCH v1] serial: msm-geni: configure RX watermark register   Simon Glass
• [PATCH v1 2/3] configs: phycore_am62ax_r5_ethboot: Drop duplicate CONFIG_SPL_MMC   Wadim Egorov
• [PATCH] fs/squashfs: Set ret to 0 on successful read   Michael Zimmermann
  • [PATCH] fs/squashfs: Set ret to 0 on successful read   Richard GENOUD
  • [PATCH] fs/squashfs: Set ret to 0 on successful read   Simon Glass
  • [PATCH] fs/squashfs: Set ret to 0 on successful read   Tom Rini
• [PATCH v1 3/3] configs: phycore_am62x_r5_ethboot: Drop duplicate CONFIG entries   Wadim Egorov
• [PATCH 1/1] acpi: fix initial RSDT and XSDT size   Heinrich Schuchardt
  • [PATCH 1/1] acpi: fix initial RSDT and XSDT size   Simon Glass
• [PATCH] pinctrl: mediatek: add airoha an7581/an7583 pinctrl driver   Mikhail Kshevetskiy
  • [PATCH] pinctrl: mediatek: add airoha an7581/an7583 pinctrl driver   David Lechner
    • [PATCH] pinctrl: mediatek: add airoha an7581/an7583 pinctrl driver   David Lechner
• [PATCH] xen: Handle malloc failure in errmsg function   Francois Berder
  • [PATCH] xen: Handle malloc failure in errmsg function   Simon Glass
• [PATCHv4 0/6] various memory related fixups   rs at ti.com
  • [PATCHv4 1/6] lmb: allocation flags macro documentation   rs at ti.com
    • [PATCHv4 1/6] lmb: allocation flags macro documentation   Simon Glass
  • [PATCHv4 2/6] boot_fdt_add_mem_rsv_regions: free old dtb reservations   rs at ti.com
    • [PATCHv4 2/6] boot_fdt_add_mem_rsv_regions: free old dtb reservations   Simon Glass
      • [PATCHv4 2/6] boot_fdt_add_mem_rsv_regions: free old dtb reservations   Randolph Sapp
      • [PATCHv4 2/6] boot_fdt_add_mem_rsv_regions: free old dtb reservations   Simon Glass
      • [PATCHv4 2/6] boot_fdt_add_mem_rsv_regions: free old dtb reservations   Randolph Sapp
  • [PATCHv4 3/6] efi_dt_fixup: use fdtdec_get_bool   rs at ti.com
  • [PATCHv4 5/6] efi_mem_sort: use list_for_each_entry_safe instead   rs at ti.com
  • [PATCHv4 6/6] memory: reserve from start_addr_sp to initial_relocaddr   rs at ti.com
    • [PATCHv4 6/6] memory: reserve from start_addr_sp to initial_relocaddr   Simon Glass
• [PATCHv4 4/6] efi_selftest_memory: check for duplicates first   rs at ti.com
• [PATCH RESEND v2 1/1] doc: emulation: qemu-arm: add secure state steps   Heinrich Schuchardt
  • [PATCH RESEND v2 1/1] doc: emulation: qemu-arm: add secure state steps   Heinrich Schuchardt
• [PATCH v2 0/4] efi_loader: centralize messaging for efi_init_obj_list   Heinrich Schuchardt
  • [PATCH v2 1/4] cmd/bootefi: move efi_init_obj_list() to the start of do_bootefi   Heinrich Schuchardt
    • [PATCH v2 1/4] cmd/bootefi: move efi_init_obj_list() to the start of do_bootefi   Simon Glass
  • [PATCH v2 2/4] efi_loader: correct return value of efi_bootmgr_run()   Heinrich Schuchardt
    • [PATCH v2 2/4] efi_loader: correct return value of efi_bootmgr_run()   Ilias Apalodimas
    • [PATCH v2 2/4] efi_loader: correct return value of efi_bootmgr_run()   Simon Glass
  • [PATCH v2 3/4] efi_loader: correct efi_binary_run_dp() return value   Heinrich Schuchardt
    • [PATCH v2 3/4] efi_loader: correct efi_binary_run_dp() return value   Ilias Apalodimas
    • [PATCH v2 3/4] efi_loader: correct efi_binary_run_dp() return value   Simon Glass
  • [PATCH v2 4/4] efi_loader: centralize messaging for efi_init_obj_list   Heinrich Schuchardt
    • [PATCH v2 4/4] efi_loader: centralize messaging for efi_init_obj_list   Simon Glass
• [PATCH 0/4] acpi: handle duplicate tables in acpi dump   Heinrich Schuchardt
  • [PATCH 1/4] acpi: add index parameter to acpi_find_table   Heinrich Schuchardt
    • [PATCH 1/4] acpi: add index parameter to acpi_find_table   Simon Glass
  • [PATCH 2/4] cmd/acpi: add optional index parameter to acpi dump   Heinrich Schuchardt
    • [PATCH 2/4] cmd/acpi: add optional index parameter to acpi dump   Simon Glass
  • [PATCH 3/4] test: consider index parameter in acpi_find_table test   Heinrich Schuchardt
  • [PATCH 4/4] doc: document index parameter of `acpi dump`   Heinrich Schuchardt
    • [PATCH 4/4] doc: document index parameter of `acpi dump`   Simon Glass
  • [0/4] acpi: handle duplicate tables in acpi dump   Simon Glass
• [PATCH v2 0/8] board: ten64: add USB Hub (USB5744) management support   Mathew McBride
  • [PATCH v2 1/8] usb: onboard-hub: fix compile issue with gpio.h import   Mathew McBride
    • [PATCH v2 1/8] usb: onboard-hub: fix compile issue with gpio.h import   Marek Vasut
    • [PATCH v2 1/8] usb: onboard-hub: fix compile issue with gpio.h import   Simon Glass
      • [PATCH v2 1/8] usb: onboard-hub: fix compile issue with gpio.h import   Quentin Schulz
  • [PATCH v2 2/8] board: ten64: add fdt fixup to hide usb hub topology   Mathew McBride
    • [PATCH v2 2/8] board: ten64: add fdt fixup to hide usb hub topology   Simon Glass
  • [PATCH v2 3/8] board: ten64: remove USB hub references from internal FDT when needed   Mathew McBride
    • [PATCH v2 3/8] board: ten64: remove USB hub references from internal FDT when needed   Simon Glass
  • [PATCH v2 4/8] configs: ten64: enable OF_FIXUP   Mathew McBride
    • [PATCH v2 4/8] configs: ten64: enable OF_FIXUP   Simon Glass
  • [PATCH v2 5/8] configs: ten64: enable USB_ONBOARD_HUB (USB5744) option   Mathew McBride
    • [PATCH v2 5/8] configs: ten64: enable USB_ONBOARD_HUB (USB5744) option   Simon Glass
  • [PATCH v2 6/8] configs: ten64: switch to OF_UPSTREAM   Mathew McBride
    • [PATCH v2 6/8] configs: ten64: switch to OF_UPSTREAM   Simon Glass
  • [PATCH v2 7/8] arm: dts: remove local copy Ten64 board DTS   Mathew McBride
    • [PATCH v2 7/8] arm: dts: remove local copy Ten64 board DTS   Simon Glass
  • [PATCH v2 8/8] board: ten64: start USB stack in late init   Mathew McBride
    • [PATCH v2 8/8] board: ten64: start USB stack in late init   Marek Vasut
      • [PATCH v2 8/8] board: ten64: start USB stack in late init   Mathew McBride
      • [PATCH v2 8/8] board: ten64: start USB stack in late init   Marek Vasut
• [PATCH v4] Improve handoff prepare on SoCFPGA   Brian Sune
  • [PATCH v4] Improve handoff prepare on SoCFPGA   Simon Glass
    • [PATCH v4] Improve handoff prepare on SoCFPGA   Sune Brian
      • [PATCH v4] Improve handoff prepare on SoCFPGA   Chee, Tien Fong
      • [PATCH v4] Improve handoff prepare on SoCFPGA   Simon Glass
      • [PATCH v4] Improve handoff prepare on SoCFPGA   Sune Brian
      • [PATCH v4] Improve handoff prepare on SoCFPGA   Sune Brian
• [PATCH 1/6] arm: dts: k3-j7200: ddr: Update to v0.12.0 of DDR config tool   Kumar, Udit
• [PATCH 3/6] arm: dts: k3-am68: ddr: Update to v0.12.0 of DDR config tool   Kumar, Udit
  • [PATCH 3/6] arm: dts: k3-am68: ddr: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
• [PATCH] spi: sunxi: wait for TX/RX fifo reset done   Yixun Lan
• Et si vous recrutiez un talent en alternance pour booster votre activité ?   Kedge Business School Avignon
• [PATCH v2 0/9] add memdup_nul(), use it and memdup() in a few places   Rasmus Villemoes
  • [PATCH v2 3/9] lib/string.c: drop pointless __HAVE_ARCH_STRDUP   Rasmus Villemoes
  • [PATCH v2 4/9] lib/string.c: introduce memdup_nul() helper   Rasmus Villemoes
  • [PATCH v2 5/9] lib/string.c: implement strdup() and strndup() in terms of memdup_nul()   Rasmus Villemoes
  • [PATCH v2 6/9] lib/hashtable.c: use memdup_nul() in himport_r   Rasmus Villemoes
  • [PATCH v2 7/9] common/cli.c: use memdup_nul() in run_command_list()   Rasmus Villemoes
  • [PATCH v2 8/9] drivers/core: use memdup() instead of malloc()+memcpy()   Rasmus Villemoes
  • [PATCH v2 9/9] test: lib: add test of memdup_nul()   Rasmus Villemoes
    • [PATCH v2 9/9] test: lib: add test of memdup_nul()   Simon Glass
• [PATCH v2 1/9] string: fix prototype of memdup()   Rasmus Villemoes
• [PATCH v2 2/9] stdio: drop stdio_clone   Rasmus Villemoes
• [PATCH] gpio: 74x164: use dev_read_* APIs for live-tree compatibility   Chanhong Jung
  • [PATCH] gpio: 74x164: use dev_read_* APIs for live-tree compatibility   Simon Glass
  • [PATCH v2] gpio: 74x164: use dev_read_* APIs for live-tree compatibility   Chanhong Jung
• [PATCH v2] power: regulator: tps65941: Enable FPWM bits   Neha Malcom Francis
  • [PATCH v2] power: regulator: tps65941: Enable FPWM bits   J, KEERTHY
  • [PATCH v2] power: regulator: tps65941: Enable FPWM bits   Kumar, Udit
• [PATCH v2 0/8] Add support for ubi environment to create volumes   Weijie Gao
  • [PATCH v2 1/8] ubi: remove unnecessary extern directive from function prototypes   Weijie Gao
    • [PATCH v2 1/8] ubi: remove unnecessary extern directive from function prototypes   Simon Glass
  • [PATCH v2 2/8] cmd: ubi: mark read-only function parameters with const   Weijie Gao
    • [PATCH v2 2/8] cmd: ubi: mark read-only function parameters with const   Simon Glass
  • [PATCH v2 3/8] cmd: ubi: use void * for buf parameter in ubi_volume_read   Weijie Gao
    • [PATCH v2 3/8] cmd: ubi: use void * for buf parameter in ubi_volume_read   Simon Glass
  • [PATCH v2 4/8] cmd: ubifs: mark string parameters with const   Weijie Gao
    • [PATCH v2 4/8] cmd: ubifs: mark string parameters with const   Simon Glass
  • [PATCH v2 5/8] cmd: ubi: reorganize command messages   Weijie Gao
    • [PATCH v2 5/8] cmd: ubi: reorganize command messages   Simon Glass
  • [PATCH v2 6/8] cmd: ubi: expose more APIs to public   Weijie Gao
    • [PATCH v2 6/8] cmd: ubi: expose more APIs to public   Simon Glass
  • [PATCH v2 7/8] cmd: ubi: allow creating volume with all free spaces in ubi_create_vol   Weijie Gao
    • [PATCH v2 7/8] cmd: ubi: allow creating volume with all free spaces in ubi_create_vol   Simon Glass
  • [PATCH v2 8/8] env: ubi: add support to create environment volume if it does not exist   Weijie Gao
    • [PATCH v2 8/8] env: ubi: add support to create environment volume if it does not exist   Simon Glass
• [PATCH] video: arm: rpi: Add brcm,bcm2712-hdmi0 compatible   Peter Robinson
  • [PATCH] video: arm: rpi: Add brcm,bcm2712-hdmi0 compatible   Matthias Brugger
• [PATCH] configs: mt7622: remove empty header file   Weijie Gao
• [PATCH v2 0/5] NBX10G: Marvell Armada 8040 Nodebox 10G board support   Vincent Jardin
  • [PATCH v2 1/5] arm: mach-mvebu: armada8k: cpuinfo and SAR   Vincent Jardin
  • [PATCH v2 2/5] board: freebox: add Nodebox 10G board support   Vincent Jardin
  • [PATCH v2 3/5] board: freebox: nbx10g: add emmcboot for dual-bank eMMC boot   Vincent Jardin
  • [PATCH v2 4/5] board: freebox: nbx10g: add device serial and MAC address initialization   Vincent Jardin
  • [PATCH v2 5/5] arm: dts: armada-8040-nbx: add U-Boot dtsi for conditional OP-TEE   Vincent Jardin
• [EXTERNAL] Re: [PATCH v2 5/7] arm: dts: k3-am69: ddr: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
• [PATCH v3] net: phy: fix duplicate eth_phy binding   Pranav Tilak
  • [PATCH v3] net: phy: fix duplicate eth_phy binding   Marek Vasut
• [PATCH v3] tools: mkeficapsule: Rework pkcs11 support   Wojciech Dubowik
  • [PATCH v3] tools: mkeficapsule: Rework pkcs11 support   Quentin Schulz
• [PATCH v2] board: ti: am335x: Conditional MDIO PAD configuration instead of static for AM335_ICE   Parvathi Pudi
  • [PATCH v2] board: ti: am335x: Conditional MDIO PAD configuration instead of static for AM335_ICE   Markus Schneider-Pargmann
    • [PATCH v2] board: ti: am335x: Conditional MDIO PAD configuration instead of static for AM335_ICE   Markus Schneider-Pargmann
    • [PATCH v2] board: ti: am335x: Conditional MDIO PAD configuration instead of static for AM335_ICE   Parvathi Pudi
• [PATCH v2 0/3] Enable eMMC and SD card support for QCS615   Balaji Selvanathan
  • [PATCH v2 1/3] clk: qcom: qcs615: Add SDCC1 and SDCC2 clock support   Balaji Selvanathan
  • [PATCH v2 2/3] drivers: mmc: uclass: Set removable flag based on device tree property   Balaji Selvanathan
  • [PATCH v2 3/3] configs: qcom_defconfig: Limit MMC transfer size to prevent controller timeout   Balaji Selvanathan
• [PATCH 3/3] fs: fat: Limit transfer size to prevent SDHCI controller timeout   Balaji Selvanathan
  • [PATCH 3/3] fs: fat: Limit transfer size to prevent SDHCI controller timeout   Balaji Selvanathan
• [PATCH v3 0/2] BeaglePlay: add ITE IT66121 HDMI bridge driver and enable splash   Shaurya Rane
  • [PATCH v3 1/2] video: bridge: add ITE IT66121 DPI-to-HDMI bridge driver   Shaurya Rane
  • [PATCH v3 2/2] BeaglePlay: enable IT66121 HDMI bridge and video stack   Shaurya Rane
• [PATCH v2] binman: x509_cert: add PKCS#11/HSM signing support   Sergio Prado
  • [PATCH v2] binman: x509_cert: add PKCS#11/HSM signing support   Simon Glass
    • [PATCH v2] binman: x509_cert: add PKCS#11/HSM signing support   Sergio Prado
• [PATCH 00/15] i.MX8MQ: Convert to DM_PMIC for a few boards   Peng Fan (OSS)
  • [PATCH 01/15] imx8mq: evk: drop redundant gd clearing in board_init_f   Peng Fan (OSS)
  • [PATCH 02/15] imx8mq: pitx: drop redundant gd clearing in board_init_f   Peng Fan (OSS)
  • [PATCH 03/15] imx8mq: phanbell: drop redundant gd clearing in board_init_f   Peng Fan (OSS)
  • [PATCH 04/15] imx8mq: reform2: drop redundant gd clearing in board_init_f   Peng Fan (OSS)
  • [PATCH 05/15] imx8mq: pico: drop redundant gd clearing in board_init_f   Peng Fan (OSS)
  • [PATCH 06/15] imx8mq: cm: drop redundant gd clearing in board_init_f   Peng Fan (OSS)
  • [PATCH 07/15] imx8mq: Correct signed_hdmi firmware position   Peng Fan (OSS)
  • [PATCH 08/15] mx6: sabreauto/sd: Exclude power_init_board from SPL build   Peng Fan (OSS)
  • [PATCH 09/15] board: nxp: common: fix PFUZE100 DM build and unify DM/non-DM handling   Peng Fan (OSS)
  • [PATCH 10/15] imx8mq: evk: Migrate to DM PMIC framework   Peng Fan (OSS)
  • [PATCH 11/15] imx8mq: phanbell: Drop SPL_POWER_LEGACY   Peng Fan (OSS)
  • [PATCH 12/15] imx8mq: reform2: Drop SPL_POWER_LEGACY   Peng Fan (OSS)
  • [PATCH 13/15] imx8mq: pico: Drop SPL_POWER_LEGACY   Peng Fan (OSS)
  • [PATCH 14/15] imx8mq: kontron: migrate PITX-IMX8M to DM PMIC framework   Peng Fan (OSS)
  • [PATCH 15/15] imx8mq: phanbell: enable SPL DM   Peng Fan (OSS)
• [PATCH v2 0/5] imx: Switch watchdog addressing from macros to devicetree   alice.guo at oss.nxp.com
  • [PATCH v2 1/5] imx: soc: Get watchdog base addresses from device tree   alice.guo at oss.nxp.com
  • [PATCH v2 2/5] arm: dts: imx: Update watchdog nodes for dynamic base address lookup   alice.guo at oss.nxp.com
    • [PATCH v2 2/5] arm: dts: imx: Update watchdog nodes for dynamic base address lookup   Stefan Roese
      • [PATCH v2 2/5] arm: dts: imx: Update watchdog nodes for dynamic base address lookup   Fabio Estevam
      • 回复: [PATCH v2 2/5] arm: dts: imx: Update watchdog nodes for dynamic base address lookup   Alice Guo (OSS)
      • [PATCH v2 2/5] arm: dts: imx: Update watchdog nodes for dynamic base address lookup   Fabio Estevam
  • [PATCH v2 3/5] watchdog: ulp_wdog: Use driver model for reset_cpu()   alice.guo at oss.nxp.com
  • [PATCH v2 4/5] arm: dts: imx: Enable watchdog driver model support   alice.guo at oss.nxp.com
  • [PATCH v2 5/5] imx: Remove hardcoded watchdog base address macros   alice.guo at oss.nxp.com
  • [PATCH v2 0/5] imx: Switch watchdog addressing from macros to devicetree   Francesco Dolcini
    • 回复: [PATCH v2 0/5] imx: Switch watchdog addressing from macros to devicetree   Alice Guo (OSS)
• [PATCH 0/5] configs: mediatek: remove CONFIG_IDENT_STRING   David Lechner
  • [PATCH 1/5] configs: mediatek: mt8365_evk: remove CONFIG_IDENT_STRING   David Lechner
  • [PATCH 2/5] configs: mediatek: mt8370_genio_510_evk: remove CONFIG_IDENT_STRING   David Lechner
  • [PATCH 3/5] configs: mediatek: mt8390_genio_700_evk: remove CONFIG_IDENT_STRING   David Lechner
  • [PATCH 4/5] configs: mediatek: mt8395_genio_1200_evk: remove CONFIG_IDENT_STRING   David Lechner
  • [PATCH 5/5] configs: mediatek: mt8395_genio_1200_evk_ufs: remove CONFIG_IDENT_STRING   David Lechner
  • [PATCH 0/5] configs: mediatek: remove CONFIG_IDENT_STRING   Julien Stephan
• [PATCH] rpi_arm64: Enable MBEDTLS/LWIP/WGET and WGET_HTTPS   Peter Robinson
  • [PATCH] rpi_arm64: Enable MBEDTLS/LWIP/WGET and WGET_HTTPS   Matthias Brugger
• [PATCH 0/3] mmc: mtk-sd: fix HS200 mode writes on mt8189   David Lechner
  • [PATCH 1/3] mmc: mtk-sd: enable DMA on mediatek,mt8189-mmc   David Lechner
  • [PATCH 2/3] mmc: mtk-sd: enable async_fifo_crcsts on mt8189   David Lechner
  • [PATCH 3/3] mmc: mtk-sd: fix msdc cmd ready check   David Lechner
• Updated dts/upstream to v7.0-dts   Tom Rini
• [PATCH v3 1/6] bloblist: add blob type for DT overlay   Tom Rini
• [PATCH v3 2/6] bloblist: add helper functions   Tom Rini
• [PATCH v3 3/6] bloblist: fix a potential negative size for memmove   Tom Rini
• [PATCH v3 4/6] bloblist: add API for applying blobs with specified tag   Tom Rini
• [PATCH v3 5/6] fdtdec: apply DT overlays from bloblist   Tom Rini
• [PATCH v1 0/2] board: toradex: aquila-am69: Fix 16GB dual-rank DDR cfg and memory size detection   Emanuele Ghidoli
  • [PATCH v1 1/2] board: toradex: aquila-am69: Fix 16GB dual-rank DDR configuration   Emanuele Ghidoli
  • [PATCH v1 2/2] board: toradex: aquila-am69: Fix memory size setup logic   Emanuele Ghidoli
  • [PATCH v1 0/2] board: toradex: aquila-am69: Fix 16GB dual-rank DDR cfg and memory size detection   Francesco Dolcini
  • [PATCH v1 0/2] board: toradex: aquila-am69: Fix 16GB dual-rank DDR cfg and memory size detection   Tom Rini
• [EXTERNAL] Re: [PATCH V2 0/9] board: k3: Sync rm-cfg with TIFS v11.02.09 firmware   Ernest Van Hoecke
• [PATCH v2] usb: dwc2_udc_otg_phy: fix compilation on non-Exynos patforms   Quentin Schulz
  • [PATCH v3] usb: dwc2_udc_otg_phy: fix compilation on non-Exynos patforms   Marius Dinu
    • [PATCH v3] usb: dwc2_udc_otg_phy: fix compilation on non-Exynos patforms   Marek Vasut
• [PATCH] arm64: renesas: Add Cortex-M33 build option to R-Car Gen5   Quentin Schulz
  • [PATCH] arm64: renesas: Add Cortex-M33 build option to R-Car Gen5   Marek Vasut
• [PATCH v3 00/11] Add SPL support for Qualcomm platforms, starting with sdm845   michael.srba at seznam.cz
  • [PATCH v3 01/11] Makefile: add SPL_REMAKE_ELF_LDSCRIPT feature   michael.srba at seznam.cz
    • [PATCH v3 01/11] Makefile: add SPL_REMAKE_ELF_LDSCRIPT feature   Tom Rini
      • [PATCH v3 01/11] Makefile: add SPL_REMAKE_ELF_LDSCRIPT feature   Michael Srba
      • [PATCH v3 01/11] Makefile: add SPL_REMAKE_ELF_LDSCRIPT feature   Tom Rini
      • [PATCH v3 01/11] Makefile: add SPL_REMAKE_ELF_LDSCRIPT feature   Michael Srba
      • [PATCH v3 01/11] Makefile: add SPL_REMAKE_ELF_LDSCRIPT feature   Tom Rini
  • [PATCH v3 02/11] of_live: support in SPL   michael.srba at seznam.cz
  • [PATCH v3 05/11] mach-snapdragon: add u-boot-spl-elf-sdm845.lds   michael.srba at seznam.cz
  • [PATCH v3 06/11] mach-snapdragon: Kconfig: fix duplicate SYS_MALLOC_LEN   michael.srba at seznam.cz
    • [PATCH v3 06/11] mach-snapdragon: Kconfig: fix duplicate SYS_MALLOC_LEN   Simon Glass
  • [PATCH v3 09/11] mach-snapdragon: add board_spl.c and split out common code   michael.srba at seznam.cz
  • [PATCH v3 11/11] dts: add u-boot specific sdm845 .dtsi and a .dtsi for shift-axolotl   michael.srba at seznam.cz
• [PATCH v3 03/11] drivers: allow clk_stub and spmi in SPL   michael.srba at seznam.cz
  • [PATCH v3 03/11] drivers: allow clk_stub and spmi in SPL   Tom Rini
    • [PATCH v3 03/11] drivers: allow clk_stub and spmi in SPL   Michael Srba
      • [PATCH v3 03/11] drivers: allow clk_stub and spmi in SPL   Tom Rini
      • [PATCH v3 03/11] drivers: allow clk_stub and spmi in SPL   Michael Srba
      • [PATCH v3 03/11] drivers: allow clk_stub and spmi in SPL   Tom Rini
• [PATCH v3 04/11] mach-snapdragon: boot0.h: split out msm8916_boot0.h   michael.srba at seznam.cz
• [PATCH v3 07/11] mach-snapdragon: Kconfig: changes / additions to support SPL   michael.srba at seznam.cz
  • [PATCH v3 07/11] mach-snapdragon: Kconfig: changes / additions to support SPL   Simon Glass
• [PATCH v3 08/11] mach-snapdragon: boot0.h: add sdm845_spl_boot0.h   michael.srba at seznam.cz
• [PATCH v3 10/11] qualcomm: add defconfig, env and docs for SPL on sdm845   michael.srba at seznam.cz
  • [PATCH v3 10/11] qualcomm: add defconfig, env and docs for SPL on sdm845   Simon Glass
• [PATCH v5 00/15] add software ecdsa support   Philippe Reynes
  • [PATCH v5 06/15] test: dm: ecdsa.c: clean this test as software ecdsa is now implemented   Philippe Reynes
    • [PATCH v5 06/15] test: dm: ecdsa.c: clean this test as software ecdsa is now implemented   Simon Glass
  • [PATCH v5 07/15] test: py: vboot: prepare integration test for ecdsa   Philippe Reynes
  • [PATCH v5 08/15] test: vboot: add test for ecdsa   Philippe Reynes
  • [PATCH v5 11/15] tools: binman: pre-load: add support of ecdsa   Philippe Reynes
  • [PATCH v5 13/15] tools: preload_check_sign: add support of ecdsa   Philippe Reynes
  • [PATCH v5 00/15] add software ecdsa support   Raymond Mao
• [PATCH v5 01/15] ecdsa: fix support of secp521r1   Philippe Reynes
  • [PATCH v5 01/15] ecdsa: fix support of secp521r1   Simon Glass
  • [PATCH v5 01/15] ecdsa: fix support of secp521r1   Raymond Mao
• [PATCH v5 02/15] mbedtls: enable support of ecc   Philippe Reynes
  • [PATCH v5 02/15] mbedtls: enable support of ecc   Simon Glass
  • [PATCH v5 02/15] mbedtls: enable support of ecc   Raymond Mao
• [PATCH v5 03/15] ecdsa: initial support of ecdsa using mbedtls   Philippe Reynes
  • [PATCH v5 03/15] ecdsa: initial support of ecdsa using mbedtls   Simon Glass
  • [PATCH v5 03/15] ecdsa: initial support of ecdsa using mbedtls   Raymond Mao
• [PATCH v5 04/15] test: lib: ecdsa: add initial test   Philippe Reynes
• [PATCH v5 05/15] drivers: crypto: add software ecdsa support   Philippe Reynes
  • [PATCH v5 05/15] drivers: crypto: add software ecdsa support   Simon Glass
• [PATCH v5 09/15] tools: fit_image_setup_sig: set required_keynode to -1   Philippe Reynes
  • [PATCH v5 09/15] tools: fit_image_setup_sig: set required_keynode to -1   Simon Glass
• [PATCH v5 10/15] tools: mkimage: pre-load: add support of ecdsa   Philippe Reynes
• [PATCH v5 12/15] boot: pre-load: add support of ecdsa   Philippe Reynes
• [PATCH v5 14/15] test: py: vboot: prepare test for global signature with ecdsa   Philippe Reynes
• [PATCH v5 15/15] test: py: vboot: add test for global signature with ecdsa   Philippe Reynes
• [PATCH] MAINTAINERS: Use N: for NXP entry   Marek Vasut
  • [PATCH] MAINTAINERS: Use N: for NXP entry   Fabio Estevam
• [PATCH 0/3] binman: Tidy up some missing bintool docs   Simon Glass
  • [PATCH 1/3] binman: Flesh out the p11-kit bintool docstring   Simon Glass
  • [PATCH 2/3] binman: Flesh out the pkcs11-tool bintool docstring   Simon Glass
  • [PATCH 3/3] binman: Flesh out the softhsm2-util bintool docstring   Simon Glass
    • [PATCH 3/3] binman: Flesh out the softhsm2-util bintool docstring   Quentin Schulz
    • [PATCH 3/3] binman: Flesh out the softhsm2-util bintool docstring   Quentin Schulz
• [GIT PULL] Please pull u-boot-imx-master-20260421   Fabio Estevam
  • [GIT PULL] Please pull u-boot-imx-master-20260421   Tom Rini
• [PATCH] fdtgrep: Add option to reserve free space in the output FDT   Simon Glass
  • [PATCH] fdtgrep: Add option to reserve free space in the output FDT   Marek Vasut
    • [PATCH] fdtgrep: Add option to reserve free space in the output FDT   Simon Glass
  • [PATCH] fdtgrep: Add option to reserve free space in the output FDT   Quentin Schulz
    • [PATCH] fdtgrep: Add option to reserve free space in the output FDT   Marek Vasut
      • [PATCH] fdtgrep: Add option to reserve free space in the output FDT   Quentin Schulz
• [PATCH] arch: snapdragon: Improve serial number detection using SMEM interface   Balaji Selvanathan
• [PATCH v5] Improve handoff prepare on SoCFPGA   Brian Sune
  • [PATCH v5] Improve handoff prepare on SoCFPGA   Sune Brian
    • [PATCH v5] Improve handoff prepare on SoCFPGA   Chee, Tien Fong
      • [PATCH v5] Improve handoff prepare on SoCFPGA   Sune Brian
• [PATCH] ufs: rockchip: Make use of controller resets   Alexey Charkov
  • [PATCH] ufs: rockchip: Make use of controller resets   Neil Armstrong
• [PATCH v1 0/8] socfpga: n5x: improvements and cleanup   Chee, Tien Fong
• [PATCH] clk: meson: do not fail when setting SD_EMMC_x_CLK0   Neil Armstrong
  • [PATCH] clk: meson: do not fail when setting SD_EMMC_x_CLK0   Ferass El Hafidi
  • [PATCH] clk: meson: do not fail when setting SD_EMMC_x_CLK0   Neil Armstrong
• [PATCH] doc: board: ti: k3: Add fTPM support documentation   Shiva Tripathi
• [PATCH v1 7/8] arch: arm: dts: n5x : Switch to using upstream Linux DT config   Chee, Tien Fong
  • [PATCH v1 7/8] arch: arm: dts: n5x : Switch to using upstream Linux DT config   Chee, Tien Fong
• [PATCH v3] misc: Add RZG2L OTP support   Mathieu Othacehe
  • [PATCH v3] misc: Add RZG2L OTP support   Mathieu Othacehe
  • [PATCH v3] misc: Add RZG2L OTP support   Mathieu Othacehe
• [PATCH v1 2/8] arm: dts: socfpga: n5x: enable DT register settings and update GMAC nodes   Chee, Tien Fong
• [PATCH 1/5] clk: imx6q: cosmetic: keep pll definitions together   Brian Ruley
  • [PATCH 3/5] imx6: clock: allow different clock sources for ldb   Brian Ruley
  • [PATCH 4/5] clk: imx6q: configure ldb clock selectors   Brian Ruley
  • [PATCH 5/5] video: imx: ipuv3: enable ipu clk before writing registers in CCF   Brian Ruley
• [PATCH 2/5] clk: imx6q: add missing pll bypasses   Brian Ruley
• [PATCH v3] board: ti: am335x: Conditional MDIO PAD configuration instead of static for AM335_ICE   Parvathi Pudi
• Couple of clang warnings for Rockchip boards   Quentin Schulz
  • Couple of clang warnings for Rockchip boards   Tom Rini
    • Couple of clang warnings for Rockchip boards   Tom Rini
  • Couple of clang warnings for Rockchip boards   Simon Glass
    • Couple of clang warnings for Rockchip boards   Tom Rini
      • Couple of clang warnings for Rockchip boards   Quentin Schulz
      • Couple of clang warnings for Rockchip boards   Tom Rini
    • Couple of clang warnings for Rockchip boards   Simon Glass
      • Couple of clang warnings for Rockchip boards   Tom Rini
• [PATCH 00/16] Add PIN and SPI support for Spacemit K1   Raymond Mao
  • [PATCH 01/16] gpio: add gpio driver for Spacemit K1 SoC   Raymond Mao
  • [PATCH 02/16] pinctrl: add pinctrl driver for Spacemit K1 SoC   Raymond Mao
  • [PATCH 03/16] dts: k1: fix gpio ranges   Raymond Mao
  • [PATCH 04/16] dts: k1: import pinctrl dts file from upstream folder   Raymond Mao
  • [PATCH 05/16] dts: k1: remove embedded subnode in pin configs   Raymond Mao
  • [PATCH 06/16] configs: k1: enable pinctrl and gpio   Raymond Mao
  • [PATCH 07/16] mtd: spi: select SPL_SPI_FLASH_TINY in SPL stage   Raymond Mao
  • [PATCH 08/16] mtd: spi: enable spi_nor_remove() in soft reset config   Raymond Mao
  • [PATCH 09/16] spi: fsl: add support for Spacemit K1 SoC   Raymond Mao
  • [PATCH 10/16] dts: k1: add QSPI controller support   Raymond Mao
  • [PATCH 11/16] board: k1: enable SPI NOR flash in SPL   Raymond Mao
  • [PATCH 12/16] riscv: binman: Always set default configuration in FIT image   Raymond Mao
  • [PATCH 13/16] spacemit: k1: append RISCV_MMODE_TIMERBASE   Raymond Mao
  • [PATCH 14/16] spacemit: k1: Add multiple device tree support   Raymond Mao
  • [PATCH 15/16] spacemit: k1: Add support for mmc regulator initialization   Raymond Mao
  • [PATCH 16/16] spacemit: k1: rename device tree prefix from "k1-" to "k1_"   Raymond Mao
• [PATCH v2 0/4] Enable EFI Capsule on Disk on Libre Computer LePotato & LaFrite   Ferass El Hafidi
  • [PATCH v2 2/4] arm: meson: enable SYSRESET_PSCI   Ferass El Hafidi
  • [PATCH v2 3/4] configs: libretech-ac_defconfig: enable EFI Capsule on Disk   Ferass El Hafidi
  • [PATCH v2 4/4] configs: libretech-cc_defconfig: enable EFI Capsule on Disk   Ferass El Hafidi
  • [PATCH v2 0/4] Enable EFI Capsule on Disk on Libre Computer LePotato & LaFrite   Ferass El Hafidi
• [PATCH v2 1/4] arm: mach-meson: provide reset_cpu only when SYSRESET is disabled   Ferass El Hafidi
• [PATCH v3 0/4] Enable EFI Capsule on Disk on Libre Computer LePotato & LaFrite   Ferass El Hafidi
  • [PATCH v3 1/4] arm: mach-meson: provide reset_cpu only when SYSRESET is disabled   Ferass El Hafidi
    • [PATCH v3 1/4] arm: mach-meson: provide reset_cpu only when SYSRESET is disabled   Neil Armstrong
  • [PATCH v3 2/4] arm: meson: enable SYSRESET_PSCI   Ferass El Hafidi
  • [PATCH v3 3/4] configs: libretech-ac_defconfig: enable EFI Capsule on Disk   Ferass El Hafidi
  • [PATCH v3 4/4] configs: libretech-cc_defconfig: enable EFI Capsule on Disk   Ferass El Hafidi
  • [PATCH v3 0/4] Enable EFI Capsule on Disk on Libre Computer LePotato & LaFrite   Neil Armstrong
• [PATCH v4 0/3] usb: gadget: rcar: Add RZ/G2L support and lifecycle fixes   Michele Bisogno
  • [PATCH v4 2/3] usb: gadget: rcar: Add support for reset controller   Michele Bisogno
    • [PATCH v4 2/3] usb: gadget: rcar: Add support for reset controller   Michele Bisogno
  • [PATCH v4 3/3] usb: gadget: rcar: Add support for RZ/G2L (R9A07G044)   Michele Bisogno
• [PATCH v4 1/3] usb: gadget: rcar: Fix gadget registration lifecycle in remove   Michele Bisogno
  • [PATCH v4 1/3] usb: gadget: rcar: Fix gadget registration lifecycle in remove   Michele Bisogno
• [PATCHv5 0/6] various memory related fixups   rs at ti.com
  • [PATCHv5 3/6] efi_dt_fixup: use fdtdec_get_bool   rs at ti.com
• [PATCHv5 1/6] lmb: allocation flags macro documentation   rs at ti.com
• [PATCHv5 2/6] boot_fdt_add_mem_rsv_regions: free old dtb reservations   rs at ti.com
• [PATCHv5 4/6] efi_selftest_memory: check for duplicates first   rs at ti.com
• [PATCHv5 5/6] efi_mem_sort: use list_for_each_entry_safe instead   rs at ti.com
• [PATCHv5 6/6] memory: reserve from start_addr_sp to initial_relocaddr   rs at ti.com
• [PATCH v2] smbios: Add an explicit bounds check for Type 9 length   Raymond Mao
  • [PATCH v2] smbios: Add an explicit bounds check for Type 9 length   Simon Glass
  • [PATCH v2] smbios: Add an explicit bounds check for Type 9 length   Ilias Apalodimas
• [PATCH v2] gunzip: Implement chunked decompression   Tom Rini
• [PATCH v6] Improve handoff prepare on SoCFPGA   Brian Sune
  • [PATCH v6] Improve handoff prepare on SoCFPGA   Brian Sune
    • [PATCH v6] Improve handoff prepare on SoCFPGA   Brian Sune
      • [PATCH v6] Improve handoff prepare on SoCFPGA   Brian Sune
      • [PATCH v6] Improve handoff prepare on SoCFPGA   Brian Sune
      • [PATCH v6] Improve handoff prepare on SoCFPGA   Brian Sune
      • [PATCH v6] Improve handoff prepare on SoCFPGA   Brian Sune
• [PATCH v1] nitrogen6x: Fix compile error if VIDEO_IPUV3 is disabled   Jacky Cao
  • [PATCH v1] nitrogen6x: Fix compile error if VIDEO_IPUV3 is disabled   Simon Gaynor
• [PATCH] mach-k3: common: init gd->bd before dram_init_banksize   Ilias Apalodimas
• [PATCH 0/2] Add SPI NOR A/B switching support and detect A/B image on MX95   fedor.ross at ifm.com
• [PATCH 1/2] imx: Add SPI NOR A/B switching support   fedor.ross at ifm.com
• [PATCH 2/2] imx9: scmi: soc: Add support for detecting primary/secondary bmode on MX95   Fedor Ross
• [PATCH v5 0/3] usb: gadget: rcar: Add RZ/G2L support and lifecycle fixes   Michele Bisogno
  • [PATCH v5 2/3] usb: gadget: rcar: Add support for reset controller   Michele Bisogno
  • [PATCH v5 3/3] usb: gadget: rcar: Add support for RZ/G2L (R9A07G044)   Michele Bisogno
  • [PATCH v5 2/3] usb: gadget: rcar: Add support for reset controller   Michele Bisogno
• [PATCH v5 1/3] usb: gadget: rcar: Fix gadget registration lifecycle in remove   Michele Bisogno
• [PATCH 0/9] Add ethernet support for genio 520/720 EVK boards   Julien Stephan
  • [PATCH 1/9] MAINTAINERS: remove trailing colons from section titles   Julien Stephan
  • [PATCH 2/9] MAINTAINERS: add maintainer entry for air_en8811 driver   Julien Stephan
  • [PATCH 3/9] net: Fix alphabetical ordering in drivers/net/Makefile   Julien Stephan
  • [PATCH 4/9] net: Fix alphabetical ordering in drivers/net/Kconfig   Julien Stephan
  • [PATCH 5/9] net: phy: air_phy_lib: Factorize BuckPBus register   Julien Stephan
  • [PATCH 7/9] net: dwc_eth_qos: Add mediatek support   Julien Stephan
  • [PATCH 9/9] configs: mt8189: Enable ethernet support   Julien Stephan
• [PATCH 6/9] net: phy: Add airoha AN8801 ethernet phy driver   Julien Stephan
  • [PATCH 6/9] net: phy: Add airoha AN8801 ethernet phy driver   David Lechner
• [PATCH 8/9] arm: dts: mt8189: Add ethernet support for Genio 520/720 boards   Julien Stephan
• [PATCH] rockchip: fix asm-operand-widths clang warning   Quentin Schulz
• [PATCH v5 00/15] sc5xx Environment Cleanup and Fixes   Caleb Ethridge
• [PATCH v5 01/15] configs: sc5xx: Do not store environment in SPI flash   Caleb Ethridge
• [PATCH v5 02/15] mach-sc5xx: Remove update commands from default environment   Caleb Ethridge
• [PATCH v5 03/15] mach-sc5xx: Update boot commands   Caleb Ethridge
• [PATCH v5 04/15] mach-sc5xx: Switch from tftp to wget   Caleb Ethridge
• [PATCH v5 05/15] mach-sc5xx: Add USB boot command   Caleb Ethridge
• [PATCH v5 06/15] mach-sc5xx: Remove preliminary binman support   Caleb Ethridge
• [PATCH v5 07/15] dts: sc594: Fix gige-reset line on EZKIT   Caleb Ethridge
• [PATCH v5 08/15] mach-sc5xx: sc573: Rename EZKIT board to EZLITE   Caleb Ethridge
• [PATCH v5 09/15] mach-sc5xx: Update image load address   Caleb Ethridge
• [PATCH v5 10/15] mach-sc5xx: Update SPI bootargs for ubifs   Caleb Ethridge
• [PATCH v5 11/15] configs: sc5xx: Set default bootcmd to SPI boot   Caleb Ethridge
• [PATCH v5 12/15] arm: sc5xx: Remove SC5XX_LOADADDR   Caleb Ethridge
• [PATCH v5 13/15] arm: sc5xx: add missing boot env selectors   Caleb Ethridge
• [PATCH v5 14/15] arm: sc5xx: Add fdt_addr_r, kernel_addr_r, and ramdisk_addr_r   Caleb Ethridge
• [PATCH v5 15/15] mach-sc5xx: Remove unused image offset Kconfig options   Caleb Ethridge
• [PATCH 5/9] net: phy: air_phy_lib: Factorize BuckPBus register   David Lechner
• [PATCH 7/9] net: dwc_eth_qos: Add mediatek support   David Lechner
• [PATCH v3 0/2] binman: add PKCS#11/HSM signing support for X509 certificates   Sergio Prado
  • [PATCH v3 1/2] binman: bintool: add extra_env parameter to run_cmd   Sergio Prado
    • [PATCH v3 1/2] binman: bintool: add extra_env parameter to run_cmd   Quentin Schulz
• [PATCH v3 2/2] binman: x509_cert: add PKCS#11/HSM signing support   Sergio Prado
  • [PATCH v3 2/2] binman: x509_cert: add PKCS#11/HSM signing support   Quentin Schulz
• RFC: Remote signing support for mkimage   Peter Robinson
• [PATCH] board: rockchip: add Anbernic RG-DS   Chris Morgan
  • [PATCH] board: rockchip: add Anbernic RG-DS   Quentin Schulz
    • [PATCH] board: rockchip: add Anbernic RG-DS   Chris Morgan
• U-Boot/RISC-V: another OS to test: QRV, port of QNX 6.4   Yuri Zaporozhets
• [PATCH v2 0/3] SoCFPGA: Update DDR Support for Gen5/Arria10 in U-Boot   Sune Brian
  • [PATCH v2 0/3] SoCFPGA: Update DDR Support for Gen5/Arria10 in U-Boot   Sune Brian
• [PATCH] rtc: ds1307: Remove legacy non-DM code   Francesco Dolcini
• [PATCH] mtd: spi-nor: Update XM25QH512C to XM25QH512D   Ssunk
• [PATCH v1 00/10] configs: toradex: Enable EFI   Francesco Dolcini
  • [PATCH v1 01/10] configs: apalis-imx8: Enable EFI   Francesco Dolcini
  • [PATCH v1 02/10] configs: aquila-am69: Enable EFI related options   Francesco Dolcini
  • [PATCH v1 03/10] configs: colibri-imx8x: Enable EFI   Francesco Dolcini
  • [PATCH v1 04/10] configs: toradex-smarc-imx8mp: Enable EFI related options   Francesco Dolcini
  • [PATCH v1 05/10] configs: toradex-smarc-imx95: Enable EFI related options   Francesco Dolcini
  • [PATCH v1 07/10] configs: verdin-am62p: Enable EFI related options   Francesco Dolcini
  • [PATCH v1 08/10] configs: verdin-imx8mm: Enable EFI related options   Francesco Dolcini
  • [PATCH v1 09/10] configs: verdin-imx8mp: Enable EFI related options   Francesco Dolcini
• [PATCH v1 06/10] configs: verdin-am62: Enable EFI related options   Francesco Dolcini
• [PATCH v1 10/10] configs: verdin-imx95: Enable EFI related options   Francesco Dolcini
• [PATCH v2] dts: lemans-evk-u-boot: add override dtsi   Sumit Garg
• [PATCH 1/1] .clang-format: add U-Boot specific for each macros   Heinrich Schuchardt
• [PATCH 1/1] doc: .clang-format description   Heinrich Schuchardt
  • [PATCH 1/1] doc: .clang-format description   Heinrich Schuchardt
    • [PATCH 1/1] doc: .clang-format description   Quentin Schulz
• [PATCH] cmd: ums: Switch HW partition before block access   Christoph Niedermaier
  • [PATCH] cmd: ums: Switch HW partition before block access   Marek Vasut
• [PATCH v5 3/3] usb: gadget: rcar: Add support for RZ/G2L (R9A07G044)   Michele Bisogno
• [PATCH v3 1/2] net: fsl_enetc: fix the duplex setting on the iMX platform   Tim Harvey
• [PATCH v6 0/3] usb: gadget: rcar: Add RZ/G2L support and lifecycle fixes   Michele Bisogno
• [PATCH v6 1/3] usb: gadget: rcar: Fix gadget registration lifecycle in remove   Michele Bisogno
  • [PATCH v6 1/3] usb: gadget: rcar: Fix gadget registration lifecycle in remove   Michele Bisogno
• [PATCH v6 2/3] usb: gadget: rcar: Add support for reset controller   Michele Bisogno
• [PATCH v6 3/3] usb: gadget: rcar: Add support for RZ/G2L (R9A07G044)   Michele Bisogno
• [PATCH 00/12] arm64: FF-A runtime transport for EFI variables   Harsimran Singh Tungal
  • [PATCH 01/12] efi_loader: add runtime memset helper   Harsimran Singh Tungal
    • [PATCH 01/12] efi_loader: add runtime memset helper   Ilias Apalodimas
  • [PATCH 03/12] efi_loader: add FF-A runtime support in EFI variable TEE driver   Harsimran Singh Tungal
    • [PATCH 03/12] efi_loader: add FF-A runtime support in EFI variable TEE driver   Ilias Apalodimas
  • [PATCH 04/12] efi_loader: enable EFI runtime SetVariable()/GetVariable() using FF-A transport   Harsimran Singh Tungal
  • [PATCH 05/12] efi_loader: move runtime GetVariable() helpers to efi_variable.c   Harsimran Singh Tungal
  • [PATCH 06/12] corstone1000: enable bootefi selftest   Harsimran Singh Tungal
    • [PATCH 06/12] corstone1000: enable bootefi selftest   Ilias Apalodimas
  • [PATCH 07/12] efi: selftest: add runtime variable tests with non-volatile storage   Harsimran Singh Tungal
  • [PATCH 08/12] test: dm: add sandbox FF-A runtime transport tests   Harsimran Singh Tungal
  • [PATCH 09/12] sandbox: ffa: share synthetic partition metadata via macros   Harsimran Singh Tungal
  • [PATCH 10/12] doc: arm64: document FF-A runtime path for EFI variables   Harsimran Singh Tungal
  • [PATCH 12/12] efi_loader: align FF-A cache maintenance with runtime path   Harsimran Singh Tungal
  • [PATCH 00/12] arm64: FF-A runtime transport for EFI variables   Heinrich Schuchardt
• [PATCH 02/12] arm-ffa: add FF-A bus runtime support   Harsimran Singh Tungal
• [PATCH 11/12] doc: bootefi: note two-phase runtime variables selftest   Harsimran Singh Tungal
• [GIT PULL] AMD/Xilinx changes for 2026-07-rc1 v3   Tom Rini
  • [GIT PULL] AMD/Xilinx changes for 2026-07-rc1 v3   Michal Simek
• [PATCH 00/13] iMX8M: Covert to OF_UPSTREAM   Peng Fan (OSS)
  • [PATCH 03/13] imx8mq: pico: Switch OF_UPSTREAM   Peng Fan (OSS)
• [PATCH 01/13] imx8mq: reform2: Switch to OF_UPSTREAM   Peng Fan (OSS)
• [PATCH 02/13] imx8mq: phanbell: Switch OF_UPSTREAM   Peng Fan (OSS)
• [PATCH 04/13] imx8mq: librem5: Switch to OF_UPSTREAM   Peng Fan (OSS)
• [PATCH 05/13] imx8mq: kontron-pitx-imx8m: Switch OF_UPSTREAM   Peng Fan (OSS)
• [PATCH 06/13] imx8mq: Drop arch/arm/dts/imx8mq.dtsi   Peng Fan (OSS)
• [PATCH 07/13] imx8mm: mx8menlo: Switch OF_UPSTREAM   Peng Fan (OSS)
• [PATCH 08/13] imx8mm/n: Drop unused dtsi   Peng Fan (OSS)
• [PATCH 09/13] imx8mm: data-modul-edm-sbc: Switch OF_UPSTREAM   Peng Fan (OSS)
• [PATCH 10/13] imx8mm: icore-mx8mm: Switch to OF_UPSTREAM   Peng Fan (OSS)
• [PATCH 11/13] imx8mp: dhcom-drc02/picoitx: Switch to OF_UPSTREAM   Peng Fan (OSS)
• [PATCH 12/13] imx8mp: data-modul-edm-sbc: Switch to OF_UPSTREAM   Peng Fan (OSS)
• [PATCH 13/13] imx8mp: icore-mx8mp-edimm2.2: Switch to OF_UPSTREAM   Peng Fan (OSS)
• [PATCH v4 00/11] Add support to boot TI K3 HSM M4 core   Beleswar Padhi
  • [PATCH v4 02/11] arm: mach-k3: Use FIT image data addr as fallback if 'load' prop is missing   Beleswar Padhi
    • [PATCH v4 02/11] arm: mach-k3: Use FIT image data addr as fallback if 'load' prop is missing   Tom Rini
  • [PATCH v4 04/11] arm: mach-k3: Add config option for packaging HSM firmware   Beleswar Padhi
  • [PATCH v4 06/11] arm: dts: k3-{j721s2/j722s/j784s4}-binman: Pack HSM firmware inside tispl.bin   Beleswar Padhi
  • [PATCH v4 07/11] binman: openssl: Add boot and load extensions to x509 cert   Beleswar Padhi
    • [PATCH v4 07/11] binman: openssl: Add boot and load extensions to x509 cert   Tom Rini
  • [PATCH v4 09/11] arm: dts: k3-{j721s2/j722s/j784s4}-r5.dtsi: Enable HSM core   Beleswar Padhi
  • [PATCH v4 10/11] remoteproc: k3-hsm: Introduce a remoteproc driver for K3 HSM core   Beleswar Padhi
• [PATCH v4 01/11] spl: Use FIT data address as fallback when 'load' property is absent   Beleswar Padhi
  • [PATCH v4 01/11] spl: Use FIT data address as fallback when 'load' property is absent   Tom Rini
• [PATCH v4 03/11] arm: mach-k3: Explicitly identify TIFSSTUB images when discarding buffers   Beleswar Padhi
• [PATCH v4 05/11] arm: dts: k3-binman: Add template for packing HSM firmware   Beleswar Padhi
• [PATCH v4 08/11] tools: binman: Add a test for boot and load extensions   Beleswar Padhi
  • [PATCH v4 08/11] tools: binman: Add a test for boot and load extensions   Tom Rini
• [PATCH v4 11/11] arm: mach-k3: r5: common: Invoke boot of HSM M4 core   Beleswar Padhi
• [PATCH v4 0/3] phy: add common PHY polarity properties support   Lucien.Jheng
  • [PATCH v4 2/3] net: phy: airoha: air_en8811: use standard rx-polarity/tx-polarity properties   Lucien.Jheng
• [PATCH v4 1/3] phy: add common PHY properties support   Lucien.Jheng
• [PATCH v4 3/3] test: dm: add PHY common props unit tests and sandbox DT nodes   Lucien.Jheng
• [PATCH] MAINTAINERS, mailmap: Change email for Eugen Hristev   Eugen Hristev
  • [PATCH] MAINTAINERS, mailmap: Change email for Eugen Hristev   Tom Rini
• [PATCH 01/14] serial: atmel-usart: allow selecting from ARCH_MICROCHIPSW   Eugen Hristev
  • [PATCH 01/14] serial: atmel-usart: allow selecting from ARCH_MICROCHIPSW   Robert Marko
• [PATCH v2] arm64: renesas: Add Cortex-M33 build option to R-Car Gen5   Kumar, Udit
  • [PATCH v2] arm64: renesas: Add Cortex-M33 build option to R-Car Gen5   Marek Vasut
• Nuvoton MA35D1   Dirk Eibach
• [PATCH v4 00/11] Add SPL support for Qualcomm platforms, starting with sdm845   michael.srba at seznam.cz
  • [PATCH v4 02/11] of_live: support in SPL   michael.srba at seznam.cz
  • [PATCH v4 03/11] drivers: allow clk_stub and spmi in SPL   michael.srba at seznam.cz
  • [PATCH v4 04/11] mach-snapdragon: boot0.h: split out msm8916_boot0.h   michael.srba at seznam.cz
  • [PATCH v4 07/11] mach-snapdragon: Kconfig: changes / additions to support SPL   michael.srba at seznam.cz
  • [PATCH v4 10/11] qualcomm: add defconfig, env and docs for SPL on sdm845   michael.srba at seznam.cz
• [PATCH v4 01/11] Makefile: add SPL_REMAKE_ELF_LDSCRIPT feature   michael.srba at seznam.cz
• [PATCH v4 05/11] mach-snapdragon: add u-boot-spl-elf-sdm845.lds   michael.srba at seznam.cz
• [PATCH v4 06/11] mach-snapdragon: Kconfig: fix duplicate SYS_MALLOC_LEN   michael.srba at seznam.cz
• [PATCH v4 08/11] mach-snapdragon: boot0.h: add sdm845_spl_boot0.h   michael.srba at seznam.cz
• [PATCH v4 09/11] mach-snapdragon: add board_spl.c and split out common code   michael.srba at seznam.cz
• [PATCH v4 11/11] dts: add u-boot specific sdm845 .dtsi and a .dtsi for shift-axolotl   michael.srba at seznam.cz
• [PATCH v2] MAINTAINERS, mailmap: Change email for Eugen Hristev   Eugen Hristev
  • [PATCH v2] MAINTAINERS, mailmap: Change email for Eugen Hristev   Tom Rini
• [PATCH v7 0/3] usb: gadget: rcar: Add RZ/G2L support and lifecycle fixes   Michele Bisogno
  • [PATCH v7 1/3] usb: gadget: rcar: Fix gadget registration lifecycle in remove   Michele Bisogno
  • [PATCH v7 2/3] usb: gadget: rcar: Add support for reset controller   Michele Bisogno
  • [PATCH v7 3/3] usb: gadget: rcar: Add support for RZ/G2L (R9A07G044)   Michele Bisogno
  • [PATCH v7 0/3] usb: gadget: rcar: Add RZ/G2L support and lifecycle fixes   Marek Vasut
• [PATCH 1/2] configs/j721e_{beaglebone64, evm}_defconfig: reduce fastboot buffer   Romain Naour
• [PATCH 2/2] configs/j721e_{beaglebone64, evm}_a72_defconfig: enable UCmd for snagflash fastboot-uboot   Romain Naour
• [PATCH v5 0/8] Support metadata-driven A/B boot for STM32MP25   Dario Binacchi
  • [PATCH v5 1/8] lib: uuid: add partition type GUID for extended bootloader   Dario Binacchi
  • [PATCH v5 2/8] test: dm: part: add test for part_get_info_by_uuid   Dario Binacchi
  • [PATCH v5 3/8] test: cmd: add unit tests for part command   Dario Binacchi
  • [PATCH v5 4/8] cmd: part: support lookup by UUID   Dario Binacchi
  • [PATCH v5 5/8] test: cmd: part: add UUID lookup tests   Dario Binacchi
  • [PATCH v5 6/8] fwu: add helper to get image GUID by type and bank index   Dario Binacchi
  • [PATCH v5 7/8] test: dm: fwu_mdata: add test for fwu_mdata_get_image_guid   Dario Binacchi
  • [PATCH v5 8/8] board: st: stm32mp25: support dynamic A/B bank bootup   Dario Binacchi
• [PATCH v6 0/8] Support metadata-driven A/B boot for STM32MP25   Dario Binacchi
  • [PATCH v6 1/8] lib: uuid: add partition type GUID for extended bootloader   Dario Binacchi
  • [PATCH v6 2/8] test: dm: part: add test for part_get_info_by_uuid   Dario Binacchi
  • [PATCH v6 3/8] test: cmd: add unit tests for part command   Dario Binacchi
  • [PATCH v6 4/8] cmd: part: support lookup by UUID   Dario Binacchi
  • [PATCH v6 5/8] test: cmd: part: add UUID lookup tests   Dario Binacchi
  • [PATCH v6 6/8] fwu: add helper to get image GUID by type and bank index   Dario Binacchi
  • [PATCH v6 7/8] test: dm: fwu_mdata: add test for fwu_mdata_get_image_guid   Dario Binacchi
  • [PATCH v6 8/8] board: st: stm32mp25: support dynamic A/B bank bootup   Dario Binacchi
• [PATCH v7 0/8] Support metadata-driven A/B boot for STM32MP25   Dario Binacchi
  • [PATCH v7 1/8] lib: uuid: add partition type GUID for extended bootloader   Dario Binacchi
  • [PATCH v7 2/8] test: dm: part: add test for part_get_info_by_uuid   Dario Binacchi
  • [PATCH v7 3/8] test: cmd: add unit tests for part command   Dario Binacchi
  • [PATCH v7 4/8] cmd: part: support lookup by UUID   Dario Binacchi
  • [PATCH v7 5/8] test: cmd: part: add UUID lookup tests   Dario Binacchi
  • [PATCH v7 6/8] fwu: add helper to get image GUID by type and bank index   Dario Binacchi
  • [PATCH v7 7/8] test: dm: fwu_mdata: add test for fwu_mdata_get_image_guid   Dario Binacchi
  • [PATCH v7 8/8] board: st: stm32mp25: support dynamic A/B bank bootup   Dario Binacchi
• [PATCH] fs/squashfs fix overflow in sqfs_find_inode()   Jared Stroud
  • [PATCH] fs/squashfs fix overflow in sqfs_find_inode()   Quentin Schulz
• [PATCH v3] arm64: renesas: Add Cortex-M33 build option to R-Car Gen5   Marek Vasut
• [PATCH 0/4] HS400 and HS400ES support for Exynos DW-MMC drivers   Kaustabh Chakraborty
  • [PATCH 1/4] mmc: exynos_dw_mmc: add proper init sequence for HS400 support   Kaustabh Chakraborty
  • [PATCH 2/4] mmc: dw_mmc: setup set_enhanced_strobe ops in driver   Kaustabh Chakraborty
  • [PATCH 3/4] mmc: exynos_dw_mmc: add support for HS400ES   Kaustabh Chakraborty
  • [PATCH 4/4] configs: exynos-mobile: enable support for HS400ES in MMC driver   Kaustabh Chakraborty
• [PATCH v3 00/10] Add support for ubi environment to create volumes (v3)   Weijie Gao
  • [PATCH v3 01/10] ubi: remove unnecessary extern directive from function prototypes   Weijie Gao
  • [PATCH v3 02/10] cmd: ubi: mark read-only function parameters with const   Weijie Gao
  • [PATCH v3 03/10] cmd: ubi: use void * for buf parameter in ubi_volume_read   Weijie Gao
  • [PATCH v3 04/10] cmd: ubifs: mark string parameters with const   Weijie Gao
  • [PATCH v3 05/10] cmd: ubi: change the type of parameter dynamic to bool   Weijie Gao
  • [PATCH v3 06/10] cmd: ubi: reorganize command messages   Weijie Gao
  • [PATCH v3 07/10] cmd: ubi: export more APIs to public   Weijie Gao
  • [PATCH v3 08/10] cmd: ubi: allow creating volume with all free spaces in ubi_create_vol   Weijie Gao
  • [PATCH v3 09/10] ubi: add comments for exported ubi API functions   Weijie Gao
  • [PATCH v3 10/10] env: ubi: add support to create environment volume if it does not exist   Weijie Gao
• [GIT PULL] Please pull u-boot-amlogic-next-20260427   Neil Armstrong
  • [GIT PULL] Please pull u-boot-amlogic-next-20260427   Tom Rini
• [GIT PULL] Please pull u-boot-ufs-20260313   Neil Armstrong
  • [GIT PULL] Please pull u-boot-ufs-20260313   Tom Rini
• [PATCH v7 00/14] arm: am335x: Switch to upstream devicetree   Markus Schneider-Pargmann (TI)
  • [PATCH v7 01/14] arm: dts: am335x-evm: Add backlight to the panel   Markus Schneider-Pargmann (TI)
  • [PATCH v7 02/14] configs: am335x_evm_defconfig: Enable panel   Markus Schneider-Pargmann (TI)
  • [PATCH v7 03/14] include: configs: am335x_evm: Enable vidconsole   Markus Schneider-Pargmann (TI)
  • [PATCH v7 04/14] configs: am335x_evm: Enable SPL_OPTIMIZE_INLINING   Markus Schneider-Pargmann (TI)
  • [PATCH v7 05/14] configs: am335x_evm: Unify evm board defconfigs   Markus Schneider-Pargmann (TI)
  • [PATCH v7 06/14] am33xx: Avoid hard failure on USB probe issue   Markus Schneider-Pargmann (TI)
  • [PATCH v7 07/14] arm: dts: am335x-*-u-boot: Add chosen tick-timer   Markus Schneider-Pargmann (TI)
  • [PATCH v7 08/14] arm: dts: am335x-boneblack-u-boot: Add lcdc to all boot phases   Markus Schneider-Pargmann (TI)
  • [PATCH v7 09/14] am33xx: Fix comment about config symbols   Markus Schneider-Pargmann (TI)
  • [PATCH v7 10/14] am33xx: Support upstream devicetree USB device   Markus Schneider-Pargmann (TI)
  • [PATCH v7 11/14] dm: core: Split SIMPLE_PM_BUS into phases   Markus Schneider-Pargmann (TI)
  • [PATCH v7 12/14] configs: am335x_evm_defconfig: Switch to upstream devicetree   Markus Schneider-Pargmann (TI)
  • [PATCH v7 13/14] arm: dts: am335x: Remove unused uboot devicetrees   Markus Schneider-Pargmann (TI)
  • [PATCH v7 14/14] dm: core: Remove dependency on CLK   Markus Schneider-Pargmann (TI)
• [PATCH v2 0/7] Add UFS clock support for Qualcomm SoCs   Balaji Selvanathan
  • [PATCH v2 1/7] clk: stub: Sort compatible strings alphabetically   Balaji Selvanathan
  • [PATCH v2 2/7] clk: qcom: clk-stub: Add compatibles for QCS615/SA8775P   Balaji Selvanathan
  • [PATCH v2 3/7] clk: qcom: sa8775p: Add UFS clock support   Balaji Selvanathan
  • [PATCH v2 4/7] clk: qcom: qcs615: Add UFS clock support   Balaji Selvanathan
  • [PATCH v2 5/7] clk: qcom: sc7280: Add UFS clock support   Balaji Selvanathan
  • [PATCH v2 6/7] drivers: ufs: qcom: Initialize and enable clocks before hardware access   Balaji Selvanathan
  • [PATCH v2 7/7] ufs: qcom: Remove redundant POST_CHANGE clock setup call   Balaji Selvanathan
• [PATCH v3 0/6] Relocate U-Boot in the last bank   Ilias Apalodimas
  • [PATCH v3 1/6] fdtdec: Deduplicate iterator function   Ilias Apalodimas
  • [PATCH v3 2/6] fdtdec: Introduce fdtdec_setup_mem_ram_top() to determine end of topmost DRAM bank   Ilias Apalodimas
  • [PATCH v3 3/6] treewide: move bi_dram[] from bd to gd   Ilias Apalodimas
  • [PATCH v3 4/6] common: move ram_base calculation to independent INITCALL()   Ilias Apalodimas
  • [PATCH v3 5/6] common: Clean up setup_dest_addr()   Ilias Apalodimas
  • [PATCH v3 6/6] common: Add an option to relocate on ram top   Ilias Apalodimas
• [PATCH 2/6] pinctrl: sunxi: add I2C3 mux for D1/T113-s3 (PG10/PG11)   Andre Przywara
• [PATCH v2 1/5] mtd: rawnand: sunxi: Replace hard coded value by a define   Andre Przywara
• [PATCH v2 0/4] fastboot: block: Add GPT/MBR and device selection   Balaji Selvanathan
  • [PATCH v2 1/4] fastboot: block: Add device selection syntax   Balaji Selvanathan
  • [PATCH v2 2/4] fastboot: Add GPT/MBR partition table flashing helper functions   Balaji Selvanathan
  • [PATCH v2 3/4] fastboot: block: Add GPT/MBR partition table flashing support   Balaji Selvanathan
  • [PATCH v2 4/4] doc: fastboot: Document block device selection syntax   Balaji Selvanathan
• [PATCH 1/6] sunxi: move SID MAC fallback from board env setup to EMAC read_rom_hwaddr   Andre Przywara
• sunxi pull request   Andre Przywara
  • sunxi pull request   Tom Rini
• [PATCH v2 2/5] mtd: rawnand: sunxi: make the code mode self-explanatory   Andre Przywara
• [PATCH v2 0/5] mtd: rawnand: sunxi: Fix user data length for H6   Andre Przywara
  • [PATCH v2 0/5] mtd: rawnand: sunxi: Fix user data length for H6   Michael Nazzareno Trimarchi
    • [PATCH v2 0/5] mtd: rawnand: sunxi: Fix user data length for H6   Andre Przywara
      • [PATCH v2 0/5] mtd: rawnand: sunxi: Fix user data length for H6   Michael Nazzareno Trimarchi
• [PATCH 0/1] spi: fsl_espi: fix din offset   Michael Walle
  • [PATCH 0/1] spi: fsl_espi: fix din offset   Tomas Alvarez Vanoli
• [PATCH v2 3/5] mtd: rawnand: sunxi: clean sunxi_nand_chip_init()   Andre Przywara
• [PATCH] rockchip: rk3576: Properly handle USB controller takeover from BootROM   Alexey Charkov
  • [PATCH] rockchip: rk3576: Properly handle USB controller takeover from BootROM   Quentin Schulz
    • [PATCH] rockchip: rk3576: Properly handle USB controller takeover from BootROM   Alexey Charkov
• [PATCH v2 0/2] Add SPI NOR A/B switching support and detect A/B image on MX95   fedor.ross at ifm.com
  • [PATCH v2 2/2] imx9: scmi: soc: Add support for detecting primary/secondary bmode on MX95   Fedor Ross
    • [PATCH v2 2/2] imx9: scmi: soc: Add support for detecting primary/secondary bmode on MX95   Marek Vasut
• [PATCH v2 1/2] imx: Add SPI NOR A/B switching support   fedor.ross at ifm.com
• [PATCH 0/2] configs: airoha: an7581: defconfig fixes & improvements   Mikhail Kshevetskiy
  • [PATCH 2/2] configs: airoha: an7581: disable ENV_IS_IN_MTD to avoid boot panic   Mikhail Kshevetskiy
• [PATCH 1/2] configs: airoha: an7581: enable position independent code   Mikhail Kshevetskiy
• [PATCH v3 0/2] sunxi: H616: DRAM: Fix TPR6 parameter parsing   Andre Przywara
  • [PATCH v3 1/2] sunxi: H616: dram: fix LPDDR3 TPR6 parsing   Andre Przywara
  • [PATCH v3 2/2] sunxi: H616: dram: drop default TPR6 Kconfig value   Andre Przywara
    • [PATCH v3 2/2] sunxi: H616: dram: drop default TPR6 Kconfig value   Jernej Škrabec
• [PATCH v2 1/9] m68k: dts: mcf5441x: add mmc device for mcf5441x   Angelo Dureghello
  • [PATCH v2 2/9] m68k: dts: stmark2: enable esdhc   Angelo Dureghello
  • [PATCH v2 3/9] board: stmark2: add sd boot command   Angelo Dureghello
  • [PATCH v2 4/9] board: stmark2: remove old garbage   Angelo Dureghello
  • [PATCH v2 5/9] mmc: Kconfig: allows m68k to use esdhc imx driver   Angelo Dureghello
  • [PATCH v2 6/9] configs: stmark2: add support for mmc   Angelo Dureghello
  • [PATCH v2 7/9] configs: stmark2: add bdinfo command   Angelo Dureghello
  • [PATCH v2 8/9] m68k: mcf5441x: create stub to use imx drivers   Angelo Dureghello
  • [PATCH v2 9/9] m68k: set proper u-boot image size for initial boot   Angelo Dureghello
• [PATCH 1/4] qemu: overlay signature nodes   Ludwig Nussel
  • [PATCH 2/4] iminfo: also verify signatures   Ludwig Nussel
    • [PATCH 2/4] iminfo: also verify signatures   Quentin Schulz
  • [PATCH 3/4] mkimage: define log_err and log_info   Ludwig Nussel
  • [PATCH 4/4] image-fit-sig: require signatures   Ludwig Nussel
    • [PATCH 4/4] image-fit-sig: require signatures   Quentin Schulz
  • [PATCH 1/4] qemu: overlay signature nodes   Tom Rini
• [PATCH] mtd: spi-nor: Add gd55lb02gf chips   Vincent Jardin
• [PATCH] efi_loader: fix AllocatePages overlap status   Ilias Apalodimas
  • [PATCH] efi_loader: fix AllocatePages overlap status   Harsimran Singh Tungal
  • [PATCH] efi_loader: fix AllocatePages overlap status   Heinrich Schuchardt
• [PATCH] qcom_defconfig: Switch Qualcomm fastboot flash from MMC to block   Balaji Selvanathan
• [PATCH V2] board: rockchip: add Anbernic RG-DS   Chris Morgan