[PATCH v4 06/14] test: dm: ecdsa.c: clean this test as software ecdsa is now implemented

[Philippe Reynes]

The test ecdsa was done when ecdsa was only supported by hardware.
So it wasn't possible to test ecdsa on sandbox, and there is a test
to check that ecdsa is not supported on sandbox.
Now, there is a software implementation of ecdsa. So we remove
this outdated test.

Signed-off-by: Philippe Reynes <philippe.reynes at softathome.com>
---
v2:
- initial version
v3:
- no change
v4:
- add a test that use ecdsa_verify


 test/dm/ecdsa.c | 104 +++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 94 insertions(+), 10 deletions(-)

diff --git a/test/dm/ecdsa.c b/test/dm/ecdsa.c
index d7eac7115f7..946d5ab1d81 100644
--- a/test/dm/ecdsa.c
+++ b/test/dm/ecdsa.c
@@ -3,36 +3,120 @@
 #include <crypto/ecdsa-uclass.h>
 #include <dm.h>
 #include <dm/test.h>
+#include <malloc.h>
 #include <test/ut.h>
 #include <u-boot/ecdsa.h>
 
+#define CHECK(op) ({							\
+		int err = op;						\
+		if (err < 0) {						\
+			printf("%s: %s: %s\n", __func__, #op,		\
+			       fdt_strerror(err));			\
+			return err;					\
+		}							\
+									\
+		err;							\
+	})
+
+static int set_fdt_ecdsa_point(char *fdt, char *name, const char *data, size_t len)
+{
+	char *value = NULL;
+	int ret = 0;
+
+	if (!fdt || !name || !data) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	value = malloc(len / 2);
+	if (!value) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = hex2bin(value, data, len / 2);
+	if (ret)
+		goto out;
+
+	ret = fdt_property(fdt, name, value, len / 2);
+	if (ret)
+		goto out;
+
+ out:
+	free(value);
+	return ret;
+}
+
+static int create_fdt_with_ecdsa_key(char *fdt, size_t size,
+				     const char *name, const char *curve,
+				     const char *x, const char *y)
+{
+	CHECK(fdt_create(fdt, size));
+	CHECK(fdt_finish_reservemap(fdt));
+	CHECK(fdt_begin_node(fdt, ""));
+	CHECK(fdt_begin_node(fdt, "signature"));
+	CHECK(fdt_begin_node(fdt, name));
+	CHECK(fdt_property_string(fdt, "algo", "sha256,ecdsa256"));
+	CHECK(set_fdt_ecdsa_point(fdt, "ecdsa,y-point", y, strlen(y)));
+	CHECK(set_fdt_ecdsa_point(fdt, "ecdsa,x-point", x, strlen(x)));
+	CHECK(fdt_property_string(fdt, "ecdsa,curve", curve));
+	CHECK(fdt_property_string(fdt, "key-name-hint", name));
+	CHECK(fdt_end_node(fdt)); /* name */
+	CHECK(fdt_end_node(fdt)); /* "signature" */
+	CHECK(fdt_end_node(fdt)); /* "" */
+	CHECK(fdt_finish(fdt));
+	CHECK(fdt_pack(fdt));
+
+	return 0;
+}
+
 /*
  * Basic test of the ECDSA uclass and ecdsa_verify()
  *
- * ECDSA implementations in u-boot are hardware-dependent. Until we have a
- * software implementation that can be compiled into the sandbox, all we can
- * test is the uclass support.
+ * ECDSA software implementation is tested in another test,
+ * so we only check that the class UCLASS_ECDSA may be used.
  *
- * The uclass_get() test is redundant since ecdsa_verify() would also fail. We
- * run both functions in order to isolate the cause more clearly. i.e. is
- * ecdsa_verify() failing because the UCLASS is absent/broken?
+ * The data used in this test come from RFC6979
  */
 static int dm_test_ecdsa_verify(struct unit_test_state *uts)
 {
 	struct uclass *ucp;
+	const char *full_name = "sha256,secp256r1";
+	const char *name = "key-ecdsa-256";
+	const char *curve = "prime256v1";
+	const char *x = "60FED4BA255A9D31C961EB74C6356D68C049B8923B61FA6CE669622E60F29FB6";
+	const char *y = "7903FE1008B8BC99A41AE9E95628BC64F2F1B20C2D7E9F5177A3C294D4462299";
+	const char *r = "EFD48B2AACB6A8FD1140DD9CD45E81D69D2C877B56AAF991C34D0EA84EAF3716";
+	const char *s = "F7CB1C942D657C41D436C7A1B6E29F65F3E900DBB9AFF4064DC4AB2F843ACDA8";
+	uint8_t sig[64];
+	size_t fdt_size = 512;
+	char fdt[512];
 
-	struct checksum_algo algo = {
-		.checksum_len = 256,
+	struct image_region region[] = {
+		{
+			.data = "sample",
+			.size = strlen("sample"),
+		},
 	};
 
 	struct image_sign_info info = {
-		.checksum = &algo,
+		.checksum = image_get_checksum_algo(full_name),
+		.crypto = image_get_crypto_algo(full_name),
+		.fdt_blob = fdt,
 	};
 
+	/* create a fdt with the public key */
+	ut_asserteq(0, create_fdt_with_ecdsa_key(fdt, fdt_size, name, curve, x, y));
+
+	/* prepare the signature */
+	ut_asserteq(0, hex2bin(sig +  0, r, strlen(r) / 2));
+	ut_asserteq(0, hex2bin(sig + 32, s, strlen(s) / 2));
+
 	ut_assertok(uclass_get(UCLASS_ECDSA, &ucp));
 	ut_assertnonnull(ucp);
-	ut_asserteq(-ENODEV, ecdsa_verify(&info, NULL, 0, NULL, 0));
+	ut_asserteq(0, ecdsa_verify(&info, region, 1, sig, sizeof(sig)));
 
 	return 0;
 }
+
 DM_TEST(dm_test_ecdsa_verify, UTF_SCAN_PDATA | UTF_SCAN_FDT);
-- 
2.43.0