[PATCH 4/4] arm: dts: fsl-ls1088a: Enable USB nodes

[Ye Li]

Enable USB nodes in -u-boot.dtsi. After sync dts with kernel, USB
nodes status are set to disabled. So "usb start" does not work on
ls1088ardb and ls1088aqds.

Fixes: 10ff7e6b043b ("arm: dts: fsl-ls1088a: sync usb controller nodes with Linux")
Signed-off-by: Ye Li <ye.li at nxp.com>
Tested-by: Wei Lu <w.lu at nxp.com>
---
 arch/arm/dts/fsl-ls1088a-u-boot.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/dts/fsl-ls1088a-u-boot.dtsi b/arch/arm/dts/fsl-ls1088a-u-boot.dtsi
index e2755740e5d..8ae45f6a638 100644
--- a/arch/arm/dts/fsl-ls1088a-u-boot.dtsi
+++ b/arch/arm/dts/fsl-ls1088a-u-boot.dtsi
@@ -55,10 +55,12 @@
 
 &usb0 {
 	compatible = "fsl,layerscape-dwc3", "snps,dwc3";
+	status = "okay";
 };
 
 &usb1 {
 	compatible = "fsl,layerscape-dwc3", "snps,dwc3";
+	status = "okay";
 };
 
 &esdhc {
-- 
2.37.1