[PATCH v3 07/11] mach-snapdragon: Kconfig: changes / additions to support SPL

[michael.srba at seznam.cz]

From: Michael Srba <Michael.Srba at seznam.cz>

An SoC to target has to be selected, e.g. SPL_TARGET_SDM845.
This will select reasonable defaults and enable per-SoC linker
script (if required).

Signed-off-by: Michael Srba <Michael.Srba at seznam.cz>
---
 arch/arm/Kconfig                 | 33 ++++++++++++++++++++++++++++++++-
 arch/arm/mach-snapdragon/Kconfig | 31 ++++++++++++++++++++++++++++---
 2 files changed, 60 insertions(+), 4 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 03416c55265..a4308aea635 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1124,6 +1124,7 @@ config ARCH_SNAPDRAGON
 	bool "Qualcomm Snapdragon SoCs"
 	select ARM64
 	select DM
+	select DM_EVENT if USB_DWC3_GENERIC || SPL_USB_DWC3_GENERIC
 	select DM_GPIO
 	select DM_SERIAL
 	select DM_RESET
@@ -1138,9 +1139,39 @@ config ARCH_SNAPDRAGON
 	select SAVE_PREV_BL_FDT_ADDR if !ENABLE_ARM_SOC_BOOT0_HOOK
 	select LINUX_KERNEL_IMAGE_HEADER if !ENABLE_ARM_SOC_BOOT0_HOOK
 	select SYSRESET
-	select SYSRESET_PSCI
+	select SYSRESET_PSCI if !SPL
 	select ANDROID_BOOT_IMAGE_IGNORE_BLOB_ADDR
 	select MMU_PGPROT
+	select SUPPORT_SPL
+
+	select OF_LIVE if USB_DWC3_GENERIC
+	select SPL_OF_LIVE if SPL_USB_DWC3_GENERIC
+	select ARMV8_SPL_EXCEPTION_VECTORS if SPL
+	select ENABLE_ARM_SOC_BOOT0_HOOK if SPL
+	select SPL_DM if SPL
+	select SPL_DM_GPIO if SPL
+	select SPL_DM_PMIC if SPL
+	select SPL_DM_USB_GADGET if SPL
+	select SPL_ENV_SUPPORT if SPL
+	select SPL_EVENT if SPL_USB_DWC3_GENERIC
+	select SPL_GPIO if SPL
+	select SPL_HAS_BSS_LINKER_SECTION if SPL
+	select SPL_LIBCOMMON_SUPPORT if SPL
+	select SPL_LIBDISK_SUPPORT if SPL
+	select SPL_LIBGENERIC_SUPPORT if SPL
+	select SPL_OF_REAL if SPL
+	select SPL_OF_CONTROL if SPL
+	select SPL_PINCONF if SPL
+	select SPL_PINCTRL if SPL
+	select SPL_PINCTRL_FULL if SPL
+	select SPL_PINCTRL_GENERIC if SPL
+	select SPL_PINCONF_RECURSIVE if SPL
+	select SPL_PINMUX if SPL
+	select SPL_SPMI_MSM if SPL
+	select SPL_SPRINTF if SPL
+	select SPL_STRTO if SPL
+	select SPL_USB_GADGET if SPL
+	imply SPL_MMC if SPL
 	imply OF_UPSTREAM
 	imply CMD_DM
 	imply DM_USB_GADGET
diff --git a/arch/arm/mach-snapdragon/Kconfig b/arch/arm/mach-snapdragon/Kconfig
index f82cd0d3291..1fc8f51c952 100644
--- a/arch/arm/mach-snapdragon/Kconfig
+++ b/arch/arm/mach-snapdragon/Kconfig
@@ -17,9 +17,6 @@ config SYS_MALLOC_F_LEN
 config SPL_SYS_MALLOC_F
 	default y
 
-config SPL_SYS_MALLOC_F_LEN
-	default 0x2000
-
 config SYS_MALLOC_LEN
 	default 0x800000
 
@@ -42,4 +39,32 @@ config SYS_CONFIG_NAME
 	  Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
 	  will be used for board configuration.
 
+config SPL_SHARES_INIT_SP_ADDR
+	default n
+
+config SPL_HAVE_INIT_STACK
+	default y
+
+choice
+	prompt "Qualcomm SoC select"
+	default TARGET_NONE if !SPL
+	help
+	  While U-Boot on Qualcomm platforms doesn't generally need compile-time
+	  adjustment based on the target SoC, there are a few exceptions to this.
+	  Currently this concerns boot0.h discrimination.
+
+config TARGET_NONE
+	bool "Generic build"
+	help
+	  Select this if you're not building SPL. U-Boot proper builds are currently
+	  generic across all SoCs.
+
+config TARGET_SDM845
+	bool "SPL targeting the sdm845 SoC"
+	help
+	  Select this if you are bulding u-boot SPL for sdm845.
+	  Currently this gates sdm845-specific boot0.h (only used in SPL).
+
+endchoice
+
 endif

-- 
2.53.0