[PATCH v5 04/15] mach-sc5xx: Switch from tftp to wget

[Caleb Ethridge]

From: Caleb Ethridge <caleb.ethridge at analog.com>

Switch the nfsboot and other relevant commands to use
wget instead of tftp. This also includes the addition of
the httpdstp variable for selecting the wget port.

The default port is set to 8000 instead of the usual 80
to allow for use with an unprivileged web server.

Signed-off-by: Caleb Ethridge <caleb.ethridge at analog.com>
---
 include/env/adi/adi_boot.env | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/include/env/adi/adi_boot.env b/include/env/adi/adi_boot.env
index 3c196e40603..eb098dd2256 100644
--- a/include/env/adi/adi_boot.env
+++ b/include/env/adi/adi_boot.env
@@ -15,6 +15,7 @@
 /* Config options */
 ethaddr=02:80:ad:20:31:e8
 eth1addr=02:80:ad:20:31:e9
+httpdstp=8000
 uart_console=CONFIG_UART_CONSOLE
 #ifdef CONFIG_SC59X_64
 initrd_high=0xffffffffffffffff
@@ -27,15 +28,14 @@ adi_bootargs=EARLY_PRINTK console=ttySC0,CONFIG_BAUDRATE vmalloc=512M
 ramargs=setenv bootargs ${adi_bootargs}
 
 addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:eth0:off
+rootpath=/romfs
 
 /* Boot modes are selectable and should be defined in the board env before including */
 #if defined(USE_NFS)
-// rootpath is set by CONFIG_ROOTPATH
 nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath},tcp,nfsvers=3 ${adi_bootargs}
-nfsboot=run init_ethernet;
-	tftp ${loadaddr} ${tftp_dir_prefix}${imagefile};
-	run nfsargs;
+nfsboot= run nfsargs;
 	run addip;
+	wget ${loadaddr} ${serverip}:/fitImage;
 	bootm ${loadaddr}
 #endif
 
@@ -64,8 +64,7 @@ ospiboot=run ospiargs;
 #endif
 
 #if defined(USE_RAM)
-ramboot=run init_ethernet;
-	tftp ${loadaddr} ${tfpt_dir_prefix}${imagefile};
+ramboot= wget ${loadaddr} ${serverip}:/fitImage;
 	run ramargs;
 	bootm ${loadaddr}
 #endif
-- 
2.34.1