[PATCH v1 05/10] configs: toradex-smarc-imx95: Enable EFI related options

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini at toradex.com>

Enable EFI related options, as suggested for booting standard aarch64
Linux distribution, following the ARM recommendations for SystemReady
compliance [1].

The RTC used on this board is not currently supported by U-Boot,
therefore it is not enabled at the moment.

Link: https://developer.arm.com/documentation/DUI1101/4-5/Configure-U-Boot-for-SystemReady [1]
Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>
---
 configs/toradex-smarc-imx95_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/configs/toradex-smarc-imx95_defconfig b/configs/toradex-smarc-imx95_defconfig
index 61abeff1afb6..a68adfa4e609 100644
--- a/configs/toradex-smarc-imx95_defconfig
+++ b/configs/toradex-smarc-imx95_defconfig
@@ -63,6 +63,7 @@ CONFIG_SPL_THERMAL=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_SYS_PROMPT="SMARC iMX95 # "
 CONFIG_CMD_ASKENV=y
+CONFIG_CMD_NVEDIT_EFI=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_MD5SUM=y
 CONFIG_MD5SUM_VERIFY=y
@@ -70,6 +71,7 @@ CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
-- 
2.47.3