[PATCH 2/4] arm: dts: fsl-ls1088a: Set dpmac nodes default to disabled

[Ye Li]

Disable ethernet controller dpmac nodes in fsl-ls1088a.dtsi. Board
dts is responsible to enable them. Otherwise will meet failure from
ldpaa_eth driver on LS1088AQDS board, because only few dpmac
controllers can be enabled on this board.

Signed-off-by: Ye Li <ye.li at nxp.com>
Tested-by: Wei Lu <w.lu at nxp.com>
---
 arch/arm/dts/fsl-ls1088a.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
index e5fb137ac02..9a62f148d8e 100644
--- a/arch/arm/dts/fsl-ls1088a.dtsi
+++ b/arch/arm/dts/fsl-ls1088a.dtsi
@@ -978,51 +978,61 @@
 				dpmac1: ethernet at 1 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <1>;
+					status = "disabled";
 				};
 
 				dpmac2: ethernet at 2 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <2>;
+					status = "disabled";
 				};
 
 				dpmac3: ethernet at 3 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <3>;
+					status = "disabled";
 				};
 
 				dpmac4: ethernet at 4 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <4>;
+					status = "disabled";
 				};
 
 				dpmac5: ethernet at 5 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <5>;
+					status = "disabled";
 				};
 
 				dpmac6: ethernet at 6 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <6>;
+					status = "disabled";
 				};
 
 				dpmac7: ethernet at 7 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <7>;
+					status = "disabled";
 				};
 
 				dpmac8: ethernet at 8 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <8>;
+					status = "disabled";
 				};
 
 				dpmac9: ethernet at 9 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <9>;
+					status = "disabled";
 				};
 
 				dpmac10: ethernet at a {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0xa>;
+					status = "disabled";
 				};
 			};
 		};
-- 
2.37.1